Used Brokk 40 for sale (21,992)

Condition: defective spare-parts repository (used), Year of construction: 2016, functionality: not functional, machine/vehicle number: 30038908, overall weight: 15,700 kg, We are selling a damaged machine that requires repair – sold as is, without warranty: Machine: Hedelius Tiltenta – CNC machining center – T7 Magnum 1R 40/530/3200/12 Year of manufacture: 2016 Serial number: 30038908 Dedpfx Alozy U Rujbjwb Weight: approximately 15.70 tons Damages (not a complete list): Ball screw of the X-axis is defective, including bearing, adjusting nut, timing belt, and 2 x adjusting nut KGT. Disc spring package on the fixed stop of the X-axis is defective. Hood of the HSA spindle is defective. Machine terminal is defective. MC screen/hard drive is defective. Slight deformations on the chip conveyor and compression on cable connections. The connecting lines of the terminal are defective and must be completely replaced. The tension bolts of the catching device of the Z-axis must be replaced. The machine geometry can only be measured after the machine has been electrically repaired. Any further damage to the geometry can only be recorded and determined afterward. The energy chain must be replaced. Length approx. 1,400 to 1,500 mm. Whether the Sauter swivel head was damaged during transport can only be determined during commissioning. The vertical slide of the Z-axis is defective and must be replaced. The left door must be straightened. Welding work may be required on the guide. Door switch and emergency stop chain must be checked during commissioning. Straightening work may be required at the pick-up station, as the terminal collided with it. The linear measuring system (LMG) of the X-axis is defective and must be replaced. The machine is sold in its damaged condition as a damaged object requiring repair without any warranties! The machine must be picked up within a short period, no later than week 39, otherwise storage costs will be charged. Sale basis: loaded onto a truck at the Spieß location, 61276 Weilrod Storage costs: from 21.09.2026, to be borne by the buyer.

Condition: used, Year of construction: 2017, overall weight: 140 kg, terms of delivery: FCA Pegnitz Dodpfx Ajzz Axcelbjwb delivery time: on request terms of payment: 100% prior to delivery

Condition: used, Year of construction: 1992, machine/vehicle number: 690-N, Item No. 26299 High-performance geared column drilling machine Dwodpfjzzpnqox Albjb Technical data: - Drilling capacity in steel ST 60: 40 mm - Drilling capacity in steel ST 60: 45 mm - Drill spindle taper: MK 4 - Thread cutting device - Drill spindle stroke: 200 mm - 9 drill spindle speeds: 61 - 1169 rpm - 4 feed rates: 0.1 / 0.4 mm/rev - Overhang: 375 mm - Max. distance table - drill spindle: 820 mm - Table with 2 T-slots: 600 x 400 mm - Height adjustable via rack and pinion with hand crank - Drive: 400 V / 1.1 / 1.3 kW - Space requirement: approx. W 600 x H 2400 x D 1050 mm - Weight: approx. 900 kg - Includes: - Right/left rotation - Coolant system - Lighting

Condition: excellent (used), Year of construction: 2012, operating hours: 6,000 h, functionality: fully functional, machine/vehicle number: 21534, travel distance X-axis: 850 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 500 mm, workpiece weight (max.): 2,000 kg, table width: 700 mm, table length: 1,070 mm, overall weight: 12,500 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 5,000 h, spindle motor power: 15,000 W, number of slots in tool magazine: 38, Equipment: chip conveyor, documentation/manual, Very good condition, used for light milling. High-pressure coolant flush through the center of the tool, 80 bar. HSK63A tool holder. Blum tool breakage detection. iTNC530 control system. Includes two vices and a pneumatic clamping device ITS100/P. Direct sale to end-user only. Price includes loading at the seller's location: Dsdpfxezw Rl Aj Albewb W-Technology s.r.o. Polní 8 79201 Bruntál Czech Republic

Year of construction: 2021, condition: excellent (used), Pump LOWARA ECOCIRC XL 40-180 F Capacity: 8 liters/s. Year of construction: 2021 - Rarely used Flanges DN40 Dwjdpfx Aszzwbljlbsb Voltage: 230 V mono (see technical details on photos)

Year of construction: 2021, condition: excellent (used), Pump LOWARA ECOCIRC XL 40-180 F Capacity: 8 liters/s. Dsdezzwbrepfx Albjwb Flanges DN40 Voltage: 230 V mono (see technical details on photos) Year of construction: 2021 - Rarely used

Condition: excellent (used), Year of construction: 2023, Traverses X Y Z: 2134 x 813 x 762mm, Table 2134 x 711mm, Spindle Speed 0 – 8,100 rpm, Spindle taper BT40, Spindle Motor 30Hp, HAAS Control, 30 Station ATC, coolant, WIPS, low volt light, and 4th axis. Dwsdpozzppuefx Albjb

Condition: used, Year of construction: 1983, functionality: limited functionality, overall weight: 6,500 kg, The machine can be inspected by appointment. Delivery is the customer's responsibility, but we can assist with packing and loading if required. Dodpfezy Efiox Albowb

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1985, load capacity: 6,000 kg, fuel type: diesel, motor manufacturer: Perkins, overall weight: 9,400 kg, Equipment: cabin, - Water-cooled-engine and starts well Dwjdpfx Ajzzw Raslbob - manually operated directional control valves for up, down, balance and extend the fork and retract it - brakes work

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 3075419, spindle speed (max.): 2,400 rpm, travel distance X-axis: 432 mm, travel distance Z-axis: 1,118 mm, swing diameter over cross slide: 635 mm, turning diameter over bed slide: 1,016 mm, For sale is a HAAS SL-40HE CNC turning center, manufactured in 2006, in a High-Center configuration with a full C-axis and driven tools. This robust CNC turning machine is suitable for demanding turning and milling operations. TECHNICAL DETAILS Travel in X-axis: 432 mm Travel in Z-axis: 1,118 mm Dwedpfxozy Npfs Albob Spindle speed max.: 2,400 rpm Swinging diameter over bed: 1,016 mm Swinging diameter over cross slide: 635 mm Bar capacity max.: 101.6 mm C-axis: full C-axis Spindle power: 29.8 kW / 40 hp Spindle nose: A2-8 Spindle bore: approx. 116.8 mm Gearbox: 2-speed Turret capacity: 10 stations Driven tools: yes MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): approx. 5,500 x 2,300 x 2,300 mm Machine weight approx.: 11,000 kg

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, total width: 2,000 mm, total length: 6,000 mm, total height: 2,000 mm, film width: 250 mm, working height: 900 mm, overall weight: 1,200 kg, roll diameter: 700 mm, warranty duration: 6 months, Equipment: documentation/manual, This machine is a used edge-banding machine from the renowned manufacturer Barberán (model RP-30), equipped with a high-quality Düspohl piston melting unit. The system is specifically designed for the professional edge-banding of profiles and offers high flexibility in terms of the materials and adhesives that can be used. Key technical features: Dsdpfx Alszxh E Ajbswb Application area: Ideal for the precise processing of wood and plastic profiles. Adhesive compatibility: Suitable for processing common hot-melt adhesives such as EVA, PO and PUR. Maximum working width: 250 mm for versatile profile geometries. Modern control system: Equipped with a clear control panel including a display for easy monitoring of process parameters. Efficient melting unit: The integration of the Düspohl piston melting unit guarantees a continuous and material-friendly melting process. The machine is in a ready-to-use condition and is perfectly suited for woodworking and plastics processing companies looking for a reliable solution for profile coating.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, CNC machining center Matec 40 HV Control system: Heidenhain iTNC530 Year of manufacture: 2013 Internal machine number: 44 Location: Netherlands Travel distances: X-axis: 4,000 mm Y-axis: 1,200 mm Z-axis: 1,300 mm (horizontal) A-axis: 0-135° B-axis: +-106° NC rotary table: 1,250 mm with 50 rpm Clearance diameter: 1,600 mm, 50 rpm with torque drive Tool magazine: 60 positions Dedpfx Aljzxp Dtjbewb Tool holder: HSK 100 Motor spindle: 15,000 rpm / 90 kW Accessories - Chip conveyor - 5-axis simultaneous operation package - Last major maintenance in 2023 - Extraction system - Internal cooling system 70 bar - 3D measuring probe with wireless connection - Tool breakage monitoring - Handwheel with wireless control HR 550 FS

Condition: refurbished (used), Year of construction: 2016, machine/vehicle number: R-00671, load capacity: 40 kg, arm reach: 2,550 mm, controller manufacturer: IRC5, teach pendant manufacturer: DSQC679, Refurbished ABB IRB 4600-40/2.55 manufactured in 2016.05. The robot comes with an IRC5 controller including Flexpendant DSQC679.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The oil is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: ABB Model: IRB 4600-40/2.55 Model Number: IRB Year of Manufacture Robot: 2016.05 Warranty term (months): 12   Payload (kg): 40 Reach (mm): 2550 Repeatability (mm): ± 0.05 Controlled Axes: 6-axis Installation Type: Floor, Upside-down Mount Weight (kg): 425   Controller: IRC5 Year of Manufacture Cabinet: 2016.05 Dsdpfx Alszzdc Asbewb RCC Length (m): 14   Teach Pendant: DSQC679 Teach Pendant Cable Length (m): 15

Condition: used, Year of construction: 2015, HORIZON VAC-100 Booklet Making System – 5 Towers / 50 Stations Manufacturer: Horizon Model: VAC-100a + VAC-100m × 4 Towers Year of Manufacture: 2010 Number of Towers: 5 Towers Number of Stations: 50 Bins * Finishing System: ST-CV Conveyor ST-40 Stacker SPF-200A Stitcher & Folder HP-200A Punch Unit FC-200A Trimmer LC-200 Long Conveyor PK-30 Preset Kicker Year of Finishing Units: 2015 * Machine Configuration: VAC-100a + VAC-100m × 4 + ST-CV + ST-40 + SPF-200A + HP-200A + FC-200A + LC-200 + PK-30 * Main Functions: Suction-feed collation Automatic booklet making Stitching and folding Hole punching Trimming Dsdszyfvuepfx Albswb Condition: Used, inspected, and serviced Availability: Available immediately Location: JCM Corporation showroom, South Korea Packing: Vacuum-packed and export-standard wooden cases

Condition: good (used), functionality: fully functional, Year of construction: 2016, machine/vehicle number: 1930036, operating hours: 6,900 h, This is a used twin-screw extruder for processing moist materials. (A complete overhaul is included in the price and will be carried out by Brabender/now Anton Paar.) The machine was used to produce textured soy protein in a purely vegan facility. The textured soy protein is moist, and it was used to produce vegan products such as "cutlets," "fish," "nuggets," "bacon," etc. Dwsdpfjzhnlujx Albsb

Condition: used, Year of construction: 1980, mit 50 Platten Plates maximum: 60 Plate formats: 400x400 Dwsdpfxjzzpdxj Albeb Platefilter features: Manual spindl dimension ca. 160x60x100 cm Distance between first plate and spindle approx ca. 120cm

Condition: used, Year of construction: 1994, operating hours: 392 h, functionality: limited functionality, machine/vehicle number: 1115, type of input current: three-phase, total height: 150 mm, total length: 2,200 mm, total width: 900 mm, overall weight: 1,800 kg, power: 11 kW (14.96 HP), input voltage: 380 V, Equipment: documentation/manual, Brand: Pawert Type: I-40/85 Year of construction: 1994 Capacity: 150 kg/hour Briquette dimensions: Ø 40 mm Dodpfx Alszyau Esbswb Motor: 11 kW Weight: 1800 Including feed screw and discharge chute.

Condition: like new (used), Year of construction: 2009, functionality: fully functional, This automatic wrapping machine is specifically designed for use with dry ice slices and/or blocks. All parts in contact with the product are made of stainless steel. Automatic pitch adjustment on the conveyor, and all motors are torque-controlled. The welding temperature is displayed and electronically controlled. The control panel consists of various instruments and visual alarms and is equipped with a self-diagnostic device. TECHNICAL DATA Working speed: Up to 25 wraps per minute, 25 meters of film per minute. Product size: Max wrap width: 250mm, Max wrap height: 60mm, Wrap length: 40 to 260mm, 140 to 580mm, and 200 to 800mm. Compressed air: 4 to 5 bars Dwodpfx Aszxgglolbsb Version: standard version is right-hand operated.

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, - Year of manufacture: 2003, commissioning: 2004 - Working dimensions: 4000x1600x200mm - Main spindle: 7.5kW - C-axis - Gluing unit - Drills: 12x vertical Djdpfjza Uryox Albewb - LED display of the vacuum pump position - Tool magazine: 12 slots

Condition: excellent (used), Year of construction: 2013, operating hours: 2,500 h, functionality: fully functional, machine/vehicle number: R1203433 Pos 1000, overall weight: 365 kg, rotor diameter: 400 mm, rotor width: 320 mm, opening width: 340 mm, input voltage: 400 V, power: 22 kW (29.91 HP), A very robust hammer mill from Alpine with grate bars for crushing soft to medium-hard materials. The mill is supplied with an inlet hopper and a device for pneumatic extraction. A control panel is not included. Machine data: 365 kg; 2800 RPM, 22 kW Rotor 400x320 mm, cast iron rotor, inlet 340x150 mm, Design with grate bars 4 rows of hammers, 5 hammers per row The machine was in operation at an R&D center in Israel. As the company now operates a production facility in the Netherlands, the R&D center will be closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production facility in the Netherlands. The details for optimal transport need to be clarified. The machine price does not include packaging on a pallet. Dwsdpfx Ajzl E N Eslbsb

Condition: good (used), Year of construction: 2019, pressure 220 t chamfer lenght 4100 mm distance between columns 4100 mm stroke of upper beam 400 mm dayligth 570 mm working feed 21.0 mm/sec return speed 200.0 mm/sec work height max. 970 mm Control LVD Touch-B CNC 18" total power requirement 37.0 kW weight 27500 kg range L-W-H 5100 x 1950 x 2850 mm well-maintained condition (!!) Special price on request Equipment: - CNC electro-hydraulic press brakes * Intuitive, touchscreen-based user interface * Simple navigation * Tool and program library * X-axis control and position display * Y-axis control and position display * Swiveling control panel (front left) Dedpfjzu A Rxex Albjwb - CNC-controlled - CNC electric backgauge (X-axis) * CNC electric gauge fingers (R-axis) * Includes height adjustment (R-axis) * Intelligent tool storage (automatic tool changing) * Bending aid - LVD upper tool holder * Hydraulic upper tool clamping - LVD lower tool holder * Hydraulic die clamping - Side safety guards (swiveling doors) - Rear safety guard (swiveling door) - 1x movable foot pedal - Machine documentation ToolCell is a fully equipped hydraulic press brake with an integrated automatic tool changer. It is the ultimate bending solution for small to medium-sized batches, high product variety, and increased workpiece complexity.

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, For sale: a Seydelmann K40 meat cutter/sausage cutter with a blade shaft speed of 1,500 to 3,000 rpm and a 2-speed bowl. Voltage: 400V, 26A, 13kW. The machine is made entirely of V2A stainless steel and is ready to plug in. The machine has been workshop-tested and is equipped with a 6-blade cutting head. Year of manufacture: 2001. Further details available upon request. Payment by cash or in advance! Sale only to commercial businesses. No guarantee, no warranty. Dwjdpfx Aszxqntelbjb

Year of construction: 1991, operating hours: 19,888 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 1.844, MACHINE DETAILS Control system: CNC Djdpfx Aszxcl Rjlbewb Operating hours: 19,888 h

Condition: good (used), Year of construction: 1996, functionality: fully functional, For sale is a used SAMCO T 40 I table milling machine / swivel spindle milling machine, manufactured in 1996. This compact and robust milling machine features a spindle that can be swiveled up to 45°, multiple speed settings, and clockwise/counter-clockwise rotation. The spindle adjustment is conveniently done using the side handwheel. Technical specifications: Manufacturer: SAMCO / SCM Type: T 40 I Year of manufacture: 1996 Machine number: KK/032907 Dodozxx Egspfx Albowb Voltage: 380 V / 50 Hz Motor power: 3 kW / 4 HP Speeds: 3,500 / 6,000 / 8,000 rpm Spindle length: approx. 125 mm Max. tool diameter: approx. 180 mm Swiveling milling spindle: up to 45° Clockwise/counter-clockwise rotation Motor brake Manual spindle height adjustment Milling fence with dust extraction option Weight: approx. 175 kg Used, well-maintained condition considering its age. The machine is compactly built and is well-suited for carpentry shops, joineries, and smaller woodworking businesses. Transportation is possible for an additional charge! The machine is currently still at the customer's location but would be immediately available! The machine will be inspected before sale. In the case of a sale to commercial customers, the warranty will be excluded due to the year of manufacture. Technical data and features may vary. Errors, prior sales, and changes are subject to change. All information without guarantee.

Condition: used, Year of construction: 2015, functionality: fully functional, type of input current: three-phase, tank capacity: 200 l, input current: 70 A, input frequency: 50 Hz, power: 70 kW (95.17 HP), INDUCTOR IH-40-HNK 40 kW Induction Aluminium Melting / Holding Furnace For sale is an INDUCTOR IH-40-HNK industrial induction melting and holding furnace manufactured in 2015. The system features a modern medium-frequency induction power supply with water-cooled induction coil and insulated stainless-steel melting vessel. The induction coil is mounted underneath the crucible, providing efficient and uniform bottom heating. The furnace is suitable for melting and holding aluminium and aluminium alloys in foundry and industrial production environments. Technical Specifications Dwedpfezy N Ihsx Albeb Manufacturer: INDUCTOR Ltd. Model: IH-40-HNK Year of manufacture: 2015 Power: 40 kW Supply voltage: 3 × 400 V / 50 Hz Rated current: 70 A Water-cooled induction system Insulated stainless-steel melting vessel Approximate vessel capacity: 200 litres Medium-frequency IGBT inverter technology PLC / HMI control system Control cabinet weight: 190 kg Applications Aluminium melting Aluminium holding Foundry operations Metal processing Casting lines The machine is offered complete with the control cabinet and induction power supply.