Condition: good (used), Jung surface grinding machine X-path: 740 mm Bed: 725 x 170 mm Magnetic bed: 460 x 155 mm Dimensions: 162x130x190 cm LxWxH Dsb Hhzoq H Ap Teu Nskl

Condition: refurbished (used), Year of construction: 1988, Functionality: fully functional, Löser centerless tube grinding machine - belt grinding machine - polishing machine - Cylindrical grinding machine Centerless tube grinding / polishing machine for workpieces with a minimum length of 1100mm. The machine was built in 1988 and was completely overhauled in 2012. The machine was converted for polishing and then only polished around 10,000 parts. The machine was no longer used after that. During the general overhaul, the motors, bearings and the entire control cabinet with the frequency converters were completely replaced. The machine can be used for both wet grinding and polishing. Wastewater treatment including pumps is not yet available. We can retrofit these for you according to customer requirements. The transport systems (roller conveyors) between the grinding stations must also be retrofitted to suit your workpieces. The machine can process pipe diameters from 10mm to 160mm. The grinding motors / polishing motors have an output of 7,5kW per station. Dkjb Hstmqi Djhzu Njl The system can be viewed by appointment in our warehouse in D-63128 Dietzenbach.

Condition: ready for operation (used), Functionality: fully functional, machine/vehicle number: 15855, Graver grinder, type GSO no. 15855, 220/380 V 50 Hz, 1.06 A/0.6 A, 2740 rpm, used condition Dksbovp Rxqo Hhzu Njl Manufacturer: Deckel Model: type GSO no. 15855 Technical Features 220/380 V 50 Hz 1.06 A / 0.6 A 2740 rpm Accessories 1 grinding wheel with wheel holder 3 collets 4/5 and 6 mm Graver grinder, type GSO no. 15855, 220/380 V 50 Hz, 1.06 A/0.6 A, 2740 rpm, used condition

Condition: used, Year of construction: 1989, grinding length 420 mm grinding width 300 mm workpiece height 100 mm Djb Hhev H Sfajzu Nskl weight of the machine ca. 1 t

Condition: ready for operation (used), Year of construction: 1978, Spline shaft grinding machine Fritz Werner type SKR 30 Y.o.m.: 1978 center height: 200 mm max. grinding diameter: 150 mm min. grinding diameter: 10 mm max. length between centers: 3000 mm max. grinding length: 2950 mm Dkjbjv Sm Nqe Hhzu Nol min./max. diameter of the grinding wheel: 40 / 250 mm main drive power: 8.5 kW With accessories. Movie with machine underpower available

Condition: excellent (used), Year of construction: 2017, Technical specifications: Double-sided machining, dry Multiple workpieces can be machined simultaneously Material thickness: 0.8 – 100 mm Max. machining width: 1300 mm Max. workpiece weight: 250 kg Min. workpiece length: 180 mm Min. workpiece width: 100 mm Throughput height: 900 mm CNC control Feed speed: up to 6 m/min. CE mark Dimensions (length x width x height): approx. 3150 x 2200 x 2250 mm Weight: approx. 5.8 tons Areas of application: Deburring of flame-cut, punched, laser-cut, oxyacetylene-cut, and waterjet-cut parts Dksb Hev Smy Aohzu Nsl Condition: Very good – almost new – condition, as it has been used very little. The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are commensurate with its age; used machines are sold without any warranty.

Condition: good (used), Aceti Macchine double grinding wheel Type: FB 90 2/4 ART 101 Dsb Hhjl I I Upjzu Nskl Diameter grinding stone max: 210 mm Machine height: 130 cm Weight: ca 125 KG

Condition: new, The tube finishing machine ML75 is ideal to polish round, oval and elliptic tubes with diameters up to 76mm with tight bend radius. ML75 has a slim and compact planetary wheel which permits the operation of curved tubes. This machine can be equipped with an automatic feeding system for straight tubes finishing. This new tube finishing machine is the answer for curved tubes which are too tight to fit ML100 and with diameter too big to fit ML50. Dksb Hhod Hfg Ejzu Nel Polishing bent tubes with tight radii: The planetary wheel of ML75 has a compact design for tight curved tubes finishing with the highest flexibility. Straight tubes finishing: Although ML75 was designed mainly for curved tubes finishing, it can be fitted with automatic feeding systems in order to polish straight tubes whenever needed. Quick set-up: Simple to work with ML75 tube polishing machine. Automatic feeding is hinge mounted and easily removable for bent tube finishing. Low heat: The soft contact with abrasive belts with ML Planetary System has a very low heat on the tube surface, unlike other conventional systems. Technical Details - ML75: Working capacity (Ø mm) 10-76.2 No. Stations 1 Abrasive belt dimensions (mm) (2x) 25x860 Abrasive belt speed (m/s) 3-22 Feeding speed (m/m) 1-5 Abrasive belts motor (kW) 2.2 Wheel motor (kW) 1.5 Feeding motor (kW) (2x) 0.12 Total power (kW) 3.94 Consumption (A) 10 Dust extraction connection (Ømm) 80 Dimensions (mm) 750x1000x1300 Weight (kg) 230

Condition: used, Year of construction: 1983, internal diameter min / max: 10 / 250 mm grinding depth 400 mm external diameter max. 380 mm swing dia. 390 mm table travel max. 550 mm stroke of the table min. 2 mm rapid traverse 10 m/min table speed -stepless- 0 - 10 m/min rough adjustment 18 mm fine adjustment 4 mm Dob Hhzevprxfou Nokl max. workpiece weight 100 kg spindle head B 6 DIN 55021 spindle turning speed - stepless 15 - 1.500 U/min pivoting angle +/- 30 Grad spindle bore 50 mm power capacity 2 kW rapid traverse 0 - 250 mm/min stroke 70 mm power requirement 3 kW weight of the machine ca. 2,7 t dimensions of the machine ca. 3,0 x 3,0 x 3,2 m Internal Grinding Machine BAHMÜLLER - JES 12 - new control (July 2015)

Condition: excellent (used), Year of construction: 1999, Grinding wheel diameter max. 100 mm Dsbeuh Rt To Hhzu Nokl Spindle speed 5600 rpm Drive power 1.5 kW Dimensions L x W x H 1000 x 800 x 1680 mm Machine weight 450 kg Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: excellent (used), Abrasive mandrels ,different sizes also single to give away. Diameter : 8-10-12-13-14,8-15-16-17-18 mm price piece 10 Euro Diameter : 20-22-25-28 mm Price per piece 12 Euro Diameter : 30-32-34-35-36-38-mm Price per piece 15 Euro Diameter : 40-42-45-48 mm Price per piece 20 Euro Deb Hhzuek R Tnpo Nokl Diameter : 50-52-55 mmPrice per piece 25 Euro Diameter : 60-62-65-68 mm Price per piece 30 Euro per piece Diameter 70 mm price per piece 40 Euro Diameter 80 mm price per piece 50 Euro We are also happy to offer you a package price.

Year of construction: 2013, operating hours: 14,044 h, Condition: ready for operation (used), General Data Measurements width 960 Measurements depth 1502 Measurements height 1900 Machine weight 850 Additional Equipment Coolant System: Coolant tank capacity: approx. 125 liters Dobjuc Hnvj Hhzu Njkl This grinding machine was manufactured in 2013. It is designed for face and top grinding of TCT circular saw blades, accommodating blade diameters from 80 to 650 mm and tooth pitches from 6 to 100 mm. Features include adjustable hook angles from -10° to +30° and clearance angles from 5° to 25°. It supports a grinding wheel diameter of 125 mm and operates at speeds up to 20 teeth/min. For more information about this grinding machine, please reach out to us. Application Types Grinding

Condition: good (used), Flat grinding machine Jung Deb Hhok N D Urozu Njkl X-travel: 740 mm Bed: 725 x 170 mm Magnet bed: 460 x 155 mm Dimensions: 162x130x190 cm LxWxH

Condition: refurbished (used), Year of construction: 1988, Functionality: fully functional, Löser centerless tube grinding machine - belt grinding machine - polishing machine - Cylindrical grinding machine Centerless tube grinding / polishing machine for workpieces with a minimum length of 1100mm. The machine was built in 1988 and was completely overhauled in 2012. The machine was converted for polishing and then only polished around 10,000 parts. The machine was no longer used after that. During the general overhaul, the motors, bearings and the entire control cabinet with the frequency converters were completely replaced. The machine can be used for both wet grinding and polishing. Wastewater treatment including pumps is not yet available. We can retrofit these for you free of charge according to customer requirements. The transport systems (roller conveyors) between the grinding stations must also be retrofitted to suit your workpieces. The machine can process pipe diameters from 10mm to 160mm. The grinding motors / polishing motors have an output of 7,5kW per station. The system can be viewed by appointment in our warehouse in D-63128 Dietzenbach. Djb Hhjpugwiezu Nekl

Year of construction: 2015, Condition: ready for operation (used), General Data Measurements width 2800 Measurements depth 3000 Measurements height 2500 Main Drive Main motor power 3.7 kW Number of axis 3 Workpiece Djb Hhzju Txhiju Njkl Workpiece Z 375 mm This 3-axis GEIBEL & HOTZ FS 640 SD grinding machine was manufactured in 2015. It features a max grinding length of 600 mm, width of 400 mm, and a workpiece height of 375 mm. The grinding spindle is horizontally fitted, powered by a 3.7 kW motor. Dimensions are 3000x2800x2500 mm. If you are looking to get high-quality grinding capabilities, consider the GEIBEL & HOTZ FS 640 SD machine we have for sale. Contact us for more information. Application Types Grinding

Condition: good (used), Norton flat grinding machine Type: MGS 17A X-travel: 540 mm Deb Hhsi Eqzwszu Nokl Speed: 2880 RPM Bed: 660 x 150 mm Dimensions: 140x110x160 cm LxWxH

Condition: new, The tube polishing machine – ML100 – is the perfect choice for finishing the surface of round, oval and elliptical tubes. The ML planetary system enables the work without rotating the tube - delivering the best results on both bent and curved tubes. The auto feeding system transports straight tubes safety and automatically through the finishing station, enabling a consistent and high productive tube polishing quality. Minimum tube vibration even on the biggest lengths: With the ML Planetary System the tube is not spinning. The abrasive belts rotate around the tube while it is safely transported by the feeding systems. Straight or curved tubes polishing: ML100 was designed to finish either straight tubes (automatically) or bent tubes (manually). Quick set-up: Simple to work with ML100 tube polishing machine. Automatic feeding is hinge mounted and easily removable for bent tube finishing. Low heat: The soft contact with abrasive belts with ML Planetary System has a very low heat on the tube surface, unlike other conventional systems. Oval tubes: Oval or elliptical tubes polishing or simply out-of-round tubes can be safety and consistently finished with ML100 Dkjb Hhzsd Hfnbsu Nol Finishing after tube drilling: Maximum adaptability of the abrasive belt to holes or graps in the material surface. Technical Details - ML100: Working capacity (Ø mm) 10 - 114 No. Stations 1 Abrasive belt dimensions (mm) (2x) 50x940 Abrasive belt speed (m/s) 3-22 Feeding speed (m/m) 1-5 Abrasive belts motor (kw) 3 Wheel motor (kw) 1.5 Feeding motor (kw) (2x) 0.12 Total power (kw) 5 Consumption (A) 11 Dust extraction connection (Ømm) 80 Dimensions (mm) 750x1000x1300 Weight (kg) 250

Year of construction: 1990, Condition: ready for operation (used), General Data Machine weight 3600 kg Control Unit Brand SIEMENS Model Marposs Measuring Control Workpiece Workpiece weight 130 kg This cylindrical grinding machine was manufactured in 1990. Equipped with a turret head for external and internal grinding, a Marposs measuring control unit, and a robust coolant filtration system. It handles a grindable diameter of 450 mm and a length of 1000 mm, supporting a maximum workpiece weight of 130 kg. Consider the opportunity to buy this STUDER S40 cylindrical grinding machine. Contact us for more information about this machine. Application Types Dkjb Hhzuou Axizo Nol Grinding

Condition: good (used), GMN flat grinding machine offered. Type: MPSE 200 Table: 140 x 260 mm Included coolant pump Machine height; 150 cm Dsb Hhzuedypzxj Nokl For more information call us or send an e-mail.

Year of construction: 2015, Condition: ready for operation (used), Main Drive Number of axis 2 This PALMARY GU32x60S cylindrical grinding machine was manufactured in 2015. It features a swivel over table of Ø320 mm and a distance between centers of 600 mm, allowing for a max external grinding diameter of Ø300 mm. With a grinding wheel speed of 45 M/s and a spindle speed up to 300 r.p.m., this machine is ideal for precision work. If you are looking to get high-quality grinding capabilities, consider the PALMARY GU32x60S machine we have for sale. Contact us for more information. Application Types Grinding Dsbevz Iuye Hhzu Njkl

Condition: ready for operation (used), OMN RV500 bowl grinder Transport dimensions: 100x70x185 cm (LxWxH) Table dimensions: 160x300 mm Location: Hamont-Achel, Belgium Dksb Hsurm Ucjhzu Njl The seller is not liable for typographical or data transmission errors. The machine is in accordance with its age in terms of appearance, technology and wear; used machines are sold without warranty. The price shown does not include VAT OMN RV500 cup grinder Transport dimensions: 100x70x185 cm (LxWxH) Table dimensions: 160x300 mm Location: Hamont-Achel, Belgium The seller is not liable for typing or data transmission errors. The machine is in appearance, technology and wear in accordance with its age; used machines are sold without warranty. The price shown is exclusive of VAT OMN RV500 Schüsselmühle Transport dimensions: 100x70x185 cm (LxWxH) Tischabmessungen: 160x300 mm Standort: Hamont-Achel, Belgium Der Verkäufer haftet nicht für Tipp- oder Datenübertragungsfehler. Die Maschine ist optisch, technisch und gebrauchstechnisch ihrem Alter entsprechend; Gebrauchtmaschinen werden ohne Gewährleistung verkauft. Der angezeigte Preis versteht sich exklusive Mehrwertsteuer

Year of construction: 2008, Condition: ready for operation (used), General Data Measurements width 1555 Measurements depth 2310 Measurements height 1950 Machine weight 2500 Main Drive Spindle speed range 3000/3600 Spindle motor power 2.2kW/3HP Dob Hhov Dymyszu Nekl This 3-axis Proth PSGS-3060AH surface grinding machine was manufactured in 2008. It offers precision and durability for various grinding applications. Consider the opportunity to buy this Proth PSGS-3060AH surface grinding machine. Contact us for more information. Application Types Grinding

Condition: ready for operation (used), Grit pipe grinder GR 75 belt sander offered. Dimensions: 140cm x 60cm x 100cm (LxWxH) 380v With several extra rolls Location: Hamont-Achel, Belgium Transport possible at more price Call or mail for more information See also our other advertisements We are also looking for industrial machines throughout the year. Do you have redundant machines, mail them to us with pictures and information. Seller is not responsible for typographical or data transmission errors. The machine is age-appropriate in appearance, technology and wear; used machines are sold without warranty. The price shown does not include VAT Grit pipe grinder GR 75 belt sander offered. Dimensions: 140cm x 60cm x 100cm (LxWxH) 380v With various extra rollers Location: Hamont-Achel, Belgium Transport possible at extra cost Call or email for more information Also view our other advertisements We are also looking for industrial machines all year round. If you have redundant machines, email them to us with photos and information. Deb Hovily Nshzu Nokl The seller is not liable for typing or data transfer errors. The machine is in terms of appearance, technology and wear and tear in accordance with its age; used machines are sold without warranty. The price shown is exclusive of VAT Angeboten wird der Kornrohrschleifer GR 75 Bandschleifer. Dimensions: 140 cm x 60 cm x 100 cm (LxWxH). 380 V Mit diversen Zusatzrollen Standort: Hamont-Achel, Belgium Transport gegen Aufpreis möglich Für weitere Informationen rufen Sie an oder senden Sie eine E-Mail Sehen Sie sich auch unsere anderen Anzeigen an Wir sind auch das ganze Jahr über auf der Suche nach Industriemaschinen. Wenn Sie über redundante Maschinen verfügen, senden Sie uns diese per E-Mail mit Fotos und Informationen. Der Verkäufer haftet nicht für Tipp- oder Datenübertragungsfehler. Die Maschine ist optisch, technisch und gebrauchstechnisch ihrem Alter entsprechend; Gebrauchtmaschinen werden ohne Gewährleistung verkauft. Der angezeigte Preis versteht sich exklusive Mehrwertsteuer

Year of construction: 2001, Condition: ready for operation (used), General Data Measurements width 2850 mm Measurements depth 4100 mm Measurements height 2350 mm Control Unit Model NUM 1050 Additional Equipment Automatic gripper clamping Various accessories and clamping devices Complete documentation Machine dimensions 4.1m x 2.85m x 2.35m / Dimensions of Felsomat workpiece loader 1.60m x 1.50m x 2.1m This 6-axis SAACKE UWIID grinding machine was manufactured in 2001. It features a NUM 1050 control, Num MDLU2 drives, a 24-pocket grinding wheel changer, and a Felsomat 70-slot workpiece loader. Equipped with CNC steady rest, automatic gripper clamping, and NUMROTO plus 3.8.1o software, it's ideal for manufacturing and resharpening. For more information about this grinding machine, please reach out to us. Dksb Hhouz Hrbjzu Nsl Application Types Grinding

Condition: good (used), Tos Hostivar cylindrical grinding machine Type: 1U X-path: 900 mm bed: 900 x 140 mm Turning diameter bed: 260 mm Chuck diameter: 120 mm Diameter grinding stone max: 320 mm Deb Hhzuoq H Ap Nj Njkl Dimensions: 150x105x140 cm LxWxH