Flat grindingmachine

Norton MGS 17A

Condition: good (used), Magnetic table 455 x 170 mm digital display water tank Honing device Hsdpfxstu Il To Aahop Wet sanding device

Condition: good (used), 1 used surface grinding machine Manufacturer: Jung Model: HF 50 Technical specifications: - Z-axis travel: 400mm - X-axis travel: 500mm - Y-axis travel: 200mm - Table length: 720mm - Maximum spindle speed: 4000rpm - Table width: 200mm - Minimum spindle speed: 1000rpm - Transport dimensions: 2300mm x 1500mm x 1700mm (L x W x H) - Transport weight: 2000kg Equipped with: - Digital readout - Diaform device Hodpfoxgbb Tsx Aahep

Year of construction: 1979, condition: good (used), Underfloor circular saw, crosscut saw, pull saw, miter saw, panel saw, table saw, aluminum circular saw, panel saw -Manufacturer: Martin, panel saw type T 70 with automatic feed Hedpfxjhfufgj Aahjp -Engine power: 11 kW -Speed: 1445 rpm -Saw blade: Ø 410 x 5 mm -max. Cutting height: 90° 140 mm / 45° 110 mm -Miter cut: up to 45° -Sliding table: 355 x 1500 mm -Dimensions total 2275/2010/H1400 mm -Weight: 1058 kg

Condition: used, Year of construction: 1980, grinding length 500 mm grinding width 200 mm workpiece height 290 mm Machine from the German Federal Institute of Physics and Metrology - geometrically revised - electrics tested, fully functional, relevant parts replaced - all wear parts replaced - colour light grey, colour condition good Equipment: - electro magnet 500x200mm - grinding spindle overhauled 2-axis display for Y and Z axes Automatic delivery for Y and Z axes Y-axis with zero shutdown Manual hand dresser Stepless speed for grinding wheel V-constant via disc wear Paper band filter system, used Max. height with 250 disc diameter 290mm max. grinding area 600x250mm max. load incl. magnet 100kg Warranty: 1 year on geometry and electronics, Germany-wide Hjdpewb Hygefx Aahsp Delivery: ex works Shipping time: immediately Payment: before pickup Acceptance at our premises Shipping according to your specifications

Condition: like new (used), functionality: fully functional, grinding length: 650 mm, grinding width: 300 mm, grinding wheel diameter: 160 mm, overall weight: 2,550 kg, power: 4 kW (5.44 HP), Brand: CCP - STANKOIMPORT Model: 3E711B Dimensions to grind: 650x300mm (X, Y) - 320mm (Z) Magnet table surface: 630x200mm Permissible table weight: 150kg Hedpfx Aaeqy H Dpshjp Distance spindle axis to table surface: 80 - 445mm Maximum stroke of the grinding head: 365mm Manual table travel: (700mm, 250mm) Table travel speed: 2 - 30 m/mm. Cross traverse speed: 0,01 - 1,5m/mm. Vertical feed rate graduation value: 0,002mm Vertical micro. graduation value: 0,0005mm Transversal feed graduation value: 0,5mm Micro. vertical feed graduation value: 0,001mm Transverse displacement one revolution of the nonius: 5mm Vertical displacement one turn of the vernier: 0.20mm Automatic table traverse feed longitudinal course: 0,2 - 30mm Automatic feed rate for grinding head: 0,002 - 0,08mm Grinding wheel dimensions: 250x76x40mm Minimum grinding wheel diameter: 160mm Spindle motor: 4kw Weight: 2550 kg.

Condition: good (used), Year of construction: 2007, travel distance X-axis: 1,060 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 635 mm, table width: 500 mm, table length: 1,200 mm, Spindle speed 10.000 Rpm Coolant tank with IKZ 20 bar Chip conveyor X - Travel: 1060mm Y - Travel: 510mm Z - Travel: 635mm Table Length: 1200mm Table Width: 500mm Feed rate X-Axis: 20000mm/min. Feed rate Y-Axis: 20000mm/min. Feed rate Z-Axis: 20000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle: 15kW Speeds / ranges: 10000Rpm ATC / revolver: 24 Coolant through spindle / Bar:20 Number of controlled axis: 3 Chip conveyor: Yes Coolantsystem: Yes Hedpfxsxdxhro Aahep Length: 2915mm Width: 2361mm Height: 2800mm Weight: 7000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, functionality: fully functional, machine/vehicle number: 7085, Used universal cylindrical grinding machine Manufacturer: WMW Model: SU 315 x 1000 mm Hedpfxowl A H De Aahep Equipped with internal grinding attachment Maximum workpiece diameter: 315 mm Maximum grinding length: 1000 mm Grinding spindle speed: 1340 rpm Workpiece speed: 22–500 rpm Longitudinal table travel: 5–1680 mm Table feed rate: 0.05–5 m/min Maximum workpiece weight: 300 kg Connected load: 12.5 kW Machine weight approx.: 5.8 t

Condition: used, grinding length 1000 mm grinding width 300 mm workpiece height 230 mm table surface area 1000 x 240 mm x-travel 1000 mm y-travel 270 mm z-travel 350 mm grinding wheel diameter 240 mm grinding spindle speed 2180 U/min table speed -stepless- 3 - 30 m/min total power requirement 4,5 kW weight of the machine ca. 2,8 t Hsdpfou Dn Txex Aahjp dimensions of machine L x W x H 2,36 x 1,37 x 2,0 m Accessories: magnetic plate 680 x 200 mm, grinding wheel with flange (ø 240 x 25 mm), wet grinding attachment

Condition: excellent (used), Year of construction: 1986, grinding length 800 mm grinding width 375 mm Hjdpjunt Iuofx Aahsp workpiece height 375 mm magnetic clamping plate, electical 900 x 300 mm spindle turning speed range 1500 - 3000 U/min table surface area 1550 x 370 mm table longitudinal travel 100 - 1000 mm max. workpiece weight 350 kg dimensions of grinding wheel 300 x 50 mm total power requirement 9 kW weight of the machine ca. 4,6 t dimensions of the machine ca. 4,0 x 2,3 x 2,6 m

Condition: good (used), Grindable, largest diameter: 200 mm Center distance: 450 mm Hjdpfxolz Nxwo Aahep Weight of the machine approx: 2, 2 t Machine dimensions: