Used Surface Profilometer for sale (6,943)

Condition: new, Surface Shields SC300XL 200 pcs Shoe Covers. Djdpfxjvxvlzs Ac Nskh Please check out our other listings as well.

Year of construction: 1998, condition: good (used), CHEVALIER FSG 1640 AD SURFACE GRINDING MACHINE Dedpfeirfpgsx Ac Njkh MAKE CHEVALIER, MADE IN TAIWAN MODEL FSG-1640 AD YEAR 1998 TABLE SIZE 1000 x 400 mm GRINDING WHEEL SIZE 445 mm TRAVERSES 400 x 1000 mm MAX HEIGHT FROM TABLE TO SPINDLE CENTRE 445.0 mm TOTAL POWER REQUIRMENT 7.4 kW PLUS AUTOMATIC DOWN FEED WHEEL-MOUNTED WHEEL DRESSER SYSTEM HYDRAULIC MOVEMENT COOLANT SYSTEM 400.0 x 1000.0 mm ELECTRO MAGNETIC CHUCK MACHINE MANUALS

Condition: reconditioned (used), Year of construction: 1990, operating hours: 10 h, functionality: fully functional, machine/vehicle number: S3370, type of input current: three-phase, CM M1500 Shot Blasting Machine CM S 3370 Maximum product dimensions: - Maximum product height: 1500 mm (measured under the hook) - Maximum diameter: Ø 1200 mm - Maximum weight: 700 kg - Equipped with 2x load-bearing hooks - 3x Turbine Ø 330 mm, 6-blade configuration - 3x Turbine: 1450 / 950 RPM – 5.7 kW / 4.1 kW Dahlander motors - Hook movement manual - Automated hook feed into the machine - Automated door operation - Fully overhauled CM shot blasting installation Mechanical and electrical systems have been completely refurbished to specification: Mechanical: - Motors & drives completely disassembled, fitted with new bearings and new seals - Blast cabin fully overhauled (sheet metal and doors), cabin prepared for manganese steel armor plates (hook brackets provided); cabin comes standard with original rubber lining, manganese steel armor as an optional extra - All augers replaced and fitted with HARDOX auger flights Dsdpfx Acoxqzmkj Nokh - All auger bearings replaced - Abrasive media elevator fitted with new elevator belt, return wheels & bearings - All chain drives & sprockets replaced - Hook feed system to machine modernized - Hook drive system completely overhauled - Compressed air supply replaced - Pneumatic cylinders & valves renewed/overhauled - 3x turbines fitted with new wear parts and new turbine wheels Ø 330 mm Electrical: - Machine fitted with 3x Turbine Ø 330 mm with dual-speed control (2-speed motors) - Siemens electric motors preventively rewound & tested, fitted with new bearings - Electrical control system completely replaced by SIEMENS S7-1200 PLC & control panel - Electrical control panel completely renewed with new relays, fully compliant with 2023 standards - Fitted with 3x SKF servo-controlled abrasive dosing systems. Abrasive supply is infinitely adjustable via the control panel for effortless switching within the two-speed blasting process - Equipped with Pilz safety equipment for turbines and moving parts, including emergency stop circuits The machine is fully operational and available for immediate sale. The machine can be fully tested at our facility in Soerendonk (test runs without abrasive media). 1-year warranty on the machine (excluding wear parts) when sold within the Netherlands.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: Inv.119140, total length: 26,000 mm, total width: 9,000 mm, Equipment: cabin, lighting, 1 used painting line, featuring circulating conveyor belt, manual spray booth for sample coating, automatic spray booth equipped with robot and workpiece rotary holder, reverse osmosis system for DI water, paint preparation, and exhaust air treatment system. The system operates two shifts in serial production. Manual loading and unloading onto a conveyor belt; otherwise fully automatic. 18.7.25: Update: Dkedpfx Acjwqg Iis Njh Dismantling is to be carried out from September 2025 on-site in Lohr by the buyer. The buyer is responsible for all costs related to dismantling, packaging, collection, and transport to their own facility (FCA terms). The area must be vacated no later than mid-January 2026 for installation of new production machines. For further details, see attached handout/flyer. Due to the significant effort required for dismantling, early and thorough planning with the disassembly company is essential, as is prompt contact or a visit to the site. Additional information is provided in the attached handout. --- 1 used painting line, with circulating conveyor, manual paint booth for samples, automatic paint booth with robot and workpiece rotary fixture, reverse osmosis system for DI-water, paint preparation, exhaust air treatment. Info in English, French, Spanish available upon request. --- Please indicate your offer price. Sale only within the EU, Switzerland, Turkey, and United Kingdom. Dismantling to be performed by the buyer. --- No packaging; all warranty rights are excluded. Should you wish to dismantle the system yourselves, please indicate this in your offer. We do not guarantee the accuracy of technical data, completeness of accessories and tools, or compliance with all safety and environmental regulations as per accident prevention guidelines.

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: AB00022255, working height: 250 mm, table length: 520 mm, table width: 900 mm, feed roller diameter: 67 mm, blade shaft diameter: 120 mm, TECHNICAL DETAILS Table dimensions: 520 x 900 mm Working height: max. 250 mm Working height: min. 3 mm Tersa cutterhead: 520 mm with 4 knives Cutterhead diameter: 120 mm Feed roller diameter: 67 mm Feed speed: 5 / 8 / 12 / 18 m/min MACHINE DETAILS Main motor power: 9 kW Dsdoydc Ecspfx Ac Nokh Weight: 1,058 kg EQUIPMENT Pneumatic table adjustment Electronic thickness table height adjustment via positioning control Tilting fence including auxiliary fence for strips

Condition: used, total height: 2,700 mm, total width: 2,000 mm, total length: 4,500 mm, Empty weight: 12.000 kg - Documentation available: No - CE certificate present: No - Drive system: Conventional - Table width [mm]: 1000 Dksdpfjw A Ngljx Ac Njh - Magnet width [mm]: 1000 - Options: Digital readout - └ Type of digital readout: Newall 2-A - Control: Conventional - Transport dimensions: 4500mm x 2000mm x 2700mm (l x w x h) - Transport weight [kg]: 12000kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren

Condition: used, total height: 1,780 mm, total length: 2,720 mm, total width: 1,910 mm, Empty weight: 2.500 kg Price: On request - Documentation available: No - CE certificate present: No - X-axis travel [mm]: 750 - Z-axis travel [mm]: 340 - Table width [mm]: 600 - Table depth [mm]: 300 - Max. grinding wheel diameter [mm]: 355 - Max. spindle speed [rpm]: 1500 - Options: Digital readout - Transport dimensions: 2725mm x 1910mm x 1780mm (l x w x h) - Transport weight [kg]: 2500kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Dkedpfjwniacox Ac Njh Bram van Summeren

Condition: used, Year of construction: 1986, total height: 1,900 mm, total length: 2,300 mm, total width: 2,200 mm, Empty weight: 2.000 kg - Year: 1986 - Documentation available: No - CE certificate present: No - Serial number: 86721 - Drive system: Conventional - Power [kW]: 1.5 - X-axis travel [mm]: 700 Dsdpew E If Eefx Ac Nskh - Y-axis travel [mm]: 400 - Z-axis travel [mm]: 400 - Table width [mm]: 900 - Table depth [mm]: 350 - Magnet width [mm]: 350 - Magnet depth [mm]: 700 - Max. grinding wheel diameter [mm]: 250 - Motor power: 1.5kW - Transport dimensions: 2300mm x 2200mm x 1900mm (l x w x h) - Transport weight [kg]: 2000kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, total height: 2,000 mm, total length: 1,900 mm, total width: 1,700 mm, Empty weight: 1.500 kg Price: On request - Documentation available: No - CE certificate present: No - Serial number: 12389 - Drive system: Conventional - X-axis travel [mm]: 670 - Y-axis travel [mm]: 250 - Z-axis travel [mm]: 400 - Table width [mm]: 800 - Table depth [mm]: 200 - Magnet width [mm]: 630 - Magnet depth [mm]: 200 - Max. grinding wheel diameter [mm]: 240 - Transport dimensions: 1900mm x 1700mm x 2000mm (l x w x h) - Transport weight [kg]: 1500kg - Transport packages [pcs.]: 1 Dksdpfxewh Npko Ac Njh Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, total height: 1,620 mm, total length: 1,750 mm, total width: 1,400 mm, Empty weight: 2.500 kg - Documentation available: No - CE certificate present: No - Drive system: Conventional Djdpoyh Amljfx Ac Nskh - Number of axes [pcs]: 3 - X-axis travel [mm]: 500 - Y-axis travel [mm]: 230 - Z-axis travel [mm]: 330 - Table width [mm]: 720 - Table depth [mm]: 200 - Magnet width [mm]: 460 - Magnet depth [mm]: 180 - Options: External cooling - Transport dimensions: 1750mm x 1400mm x 1620mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: reconditioned (used), Year of construction: 1970, functionality: fully functional, Table size 800 x 200 mm Dksdpfx Acjw R Dnxo Neh Magnet table 600 x 200 mm Grinding capacity 630 x 200 mm Max grinding high 320 mm Dia of grinding wheel max:250 mm Spindle speed 2750 rpm Power required 3,6 kW Weight 2200 kgs Dimensions L x W x H =: 1900 x 1500 x 2000 mm Dimensions of coolant tank L x W x H = 400 x 300 x 500 mm

Condition: like new (used), Year of construction: 2018, operating hours: 200 h, functionality: fully functional, Table dimensions 405 x 815 mm Magnetic table 400 x 800 mm Table travel length/cross 830 / 450 mm Distance between spindle center and table surface 580 mm Grinding wheel dimensions 350 x 40 x 127 mm Motor power 4.0 kW Weight 3400 kgs Equipment, Accessories - Siemens PLC controller with touch screen - 2-axis digital readout system - Hardened and ground bed guides - Automatic infeed - Hydraulic oil tank cooler - Electric magnetic table with demagnetization Dkedpfx Aoxlcmnjc Njh - Flange-mounted grinding wheel - Built-in diamond dressing unit - Grinding wheel balancing stand - Balancing mandrel - Coolant system - Halogen lamp - Machine feet - Magnetic chip separator - Machine manuals The machine is in original condition and barely used (approx. 100-200 hours). No defects. It is being sold due to company closing.

Condition: ready for operation (used), additional equipment features: yes, Besturing: Siemens Sinumerik 840 C Siemens-aandrijving: 6SN1145-1BA00-OCAO Worklength with magnetic table: 1230 mm Worklenth without magnetic table: 1260 mm Grindingwidth: 600 mm Longitudinal travel X-axis (autom.): 1260 mm Cross-travel Y-axis (autom.): 630 mm Dedpfxexuwxws Ac Nekh Travel Z-axis (autom.): 477 mm Dimensions of the table: 1215 x 500 mm Distance between table -- spindlecentre: 680 mm Max dia grindingstone: 406 x 50 x 127 mm Spindlespeeds: rpm Motorpower: 22 kW Cooling system: yes

Condition: good (used), Code: 0292 Brand: SCM MINIMAX Model: FORMULA F1 - CE Standard Surface planer for planing wood materials, plastics, composite materials and various - CE Standard Technical data: Working width mm 410 Table length mm 2610 N° 4 knives Dkedpjyhp S Rofx Ac Neh Shaft diameter mm 120 Shaft rotation speed rpm 5000 Guide tilting from 90° to 45° Max stock removal mm 8 Motor power Hp 5,5 Table height from ground mm 845 Suction hood diameter mm 120 Overall dimensions mm 2610 x 900 x 1070 h Weight kg 575

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 04374, grinding length: 1,000 mm, grinding width: 700 mm, grinding wheel diameter: 406 mm, table load: 1,000 kg, controller model: SIEMENS SINUMERIK 840 D, TECHNICAL DETAILS Grinding length: 1,000 mm Grinding width: 700 mm Travel X-axis: 1,120 mm Travel Y-axis: 690 mm Travel Z-axis: 635 mm Maximum workpiece weight on table: 1,000 kg Table length: 1,200 mm Table width: 500 mm Maximum grinding height above table: 650 mm Grinding wheel diameter: 406 mm Grinding wheel width: 100 mm Grinding wheel bore: 152 mm Grinding wheel speed (fixed): 1,400 rpm Maximum table speed: 40 m/min Max. automatic cross-feed (infinitely variable): 2 m/min Max. automatic vertical feed: 2 m/min MACHINE DETAILS Control: SIEMENS SINUMERIK 840 D Connection: 50 Hz 3x 400 Volt Grinding spindle motor: 11 kW Total power requirement: 31 kW Dimensions & Weight Dimensions (L x W x H): 4,750 x 3,485 x 2,680 mm Machine weight: approx. 7,800 kg EQUIPMENT Coolant system Paper filter unit Electro-magnetic chuck (1,000 x 500 mm) Dkedjyhnv Uopfx Ac Noh Set of grinding wheels Lamp

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, machine/vehicle number: 318 BG 75, grinding length: 800 mm, grinding width: 300 mm, grinding wheel diameter: 250 mm, controller model: CNC QUICK (SIEMENS 805, PLC), number of axes: 2, TECHNICAL DETAILS Grinding length: 800 mm Maximum grinding width: 300 mm Grinding wheel diameter: 250 mm Axes: 2 Table length: 800 mm Table width: 300 mm Maximum distance between table and spindle center: 600 mm Maximum width: 70 mm Width: 50 mm Bore: 51 mm Table speed: from 2 m/min to 35 m/min Creep feed: from 2 m/min to 1,000 m/min Automatic cross feed: from 1 mm/min to 10,000 mm/min Automatic vertical feed up to: 10,000 mm/min MACHINE DETAILS Control: CNC QUICK (SIEMENS 805, PLC) Connection: 50 Hz 3x 400 V Grinding spindle motor: 6.6 kW Total power requirement: 22 kVA Dkedpfoyhnlpjx Ac Neh Machine weight: 4,500 kg EQUIPMENT Coolant system Paper filter unit Coolant/fume extraction unit Coolant temperature stabilization Electro-magnetic chuck length: 800 mm Electro-magnetic chuck width: 300 mm Dressing unit TAG Profile dressing unit TAD Electronic balancing device Lamp Complete splash guard cabin RS 232-C, V 24 interface

Condition: ready for operation (used), Strahlmaschine cold jet dry Ice pellet blasting - Décapage a la glace seche - Reinigung mit Trockeneis - Limpiezacon hielo seco - Droog ijs parel straal installatie Aircompressor Altas Copco GR 200 * 20 bar - 200kW - 23 m³/min - 328 working hours Dryer Delair PDH 03114 (Hagoort Produktiemij) * 960 Nm³/h - 25 Bar - 75°C Cleanblast 290 Alpheus CleanBlast integrated pelletizer/blasting system creates small, uniform pellets of dry ice and feeds them into a pressurized air delivery system for cleaning in a variety of industrial applications. The motor system makes pellets on demand, eliminating ice loss due to sublimation, and features an advanced exchanger system that Dkodsyhiccjpfx Ac Njh maximizes the conversion of CO2 from a liquid to solid. The system is capable of transporting pellets in-plant via closed gaseous conveyance system, which eliminates the need for dry ice containers, and is available in several configurations for versatility in dry ice pellet production and blast cleaning power. * Dry Ice production: 4,5 kg/min * 2.75 - 20.70 bar * speed of the dry ice pellets can be controlled by panel * controllable discharge pressure * 10HP - 33 kW * dimensions: 1650 x 965 x 1380 mm * weight: 910 kg Tank Alteco GM 27976 * 3000 Liter - Min -10°C Max 50°C - 20.5bar V.R.V. Tank for CO² * 10530 liters - 23 bar - Temp: -60°C

Condition: new, Year of construction: 2018, Working width: 410 mm Cutterhead: reversible knives Number of knives: 4 Jointer table length: 2000 mm Jointer fence angle adjustable: yes Jointer tables fold up: manual Maximum thicknessing capacity: 240 mm Thicknessing table height adjustment: handwheel Display for planing thickness: mechanical counter Feed speed: 6/12 m/min Infeed roller: steel Outfeed roller: steel Table rollers: no Motor power: 3 kW Dsdpfx Aceyhgh Ns Nskh Motor brake: yes, automatic Extraction port: 160 mm Machine length: 2300 mm Machine width: 1100 mm Weight: 450 kg

Condition: used, Year of construction: 1993, working width: 500 mm cutter head: Tersa number of blades: 4 surface table length: 2800 mm table adjustment: lever read out table height: scala sourface fence adjustable: yes motor power: 5,5 kW machine length: 2800 mm machine width : 1000mm Dedpfxeyhgiaj Ac Nskh weight: 900 kg

Condition: used, Working width: 500 mm Knives: Reversible knives Z4 Motor: 5.5 kW Djdpfxjx Ilq Rs Ac Njkh Kölle jointer planer model AH 50, or simply a jointer for smoothing and levelling (jointing) wood. Includes adjustable angle fence.

Condition: used, Working width: 500 mm Cutter system: Strip planer knives Z4 Dedex Eykgepfx Ac Njkh Surface planer or simply planer for smoothing and levelling (surfacing) of wood. Includes adjustable angle fence, safety devices, and accessories.

Condition: used, Working width: 450 mm Working height: 100 mm (jointing) Dkjdpfx Acsvnu H Aj Nsh Kölle planing machine type HA 51, also referred to as a jointer for smoothing and levelling (jointing) timber, including Hemag jointing unit.

Condition: used, Working width: 600 mm Cutter system: Strip planer knives Z2 Kölle jointer planer, or simply surface planer, for smoothing and leveling (jointing) timber. Includes adjustable angle fence and accessories. Dkjdpfx Ajud Uxfoc Noh

Condition: like new (used), Year of construction: 2019, Horizontal surface grinder in almost new condition with few operating hours! Operating hours: see image PC control Okamoto Travel X-axis: 600 mm Travel Y-axis: 22.5 - 497 mm Travel Z-axis: 400 mm Speed range rpm: 1-2800 (stepless) Rapid traverse mm/min: 4000 Main drive kW: 7.5 Maximum table load in kg: 1000 Dedpjyhdquofx Ac Nokh Accessories: - Electro-permanent magnetic clamping plate: 400 x 600 P13 mm, height 80 mm (make Wagner) - 2 grinding wheel flanges - Table dresser - Automatic straight dresser, spindle box mounted - Automatic compensation of the wheel dressing amount - Automatic central lubrication - Ball screw in the Y and Z axes with AC servo motor and measuring system - Coolant system with belt filter system grinding length 600 mm grinding width 400 mm workpiece height 400 mm weight of the machine approx. 4,5 t dimensions of the machine approx. 3400 x 2647 x 2203 mm

Condition: good (used), Year of construction: 2001, Machine-Details: Stock-No. 1022-2276 Type of machine Surface Grinding Machine - Vertical Make REFORM Type AR 42 Typ 19 CNC Year of manufacture 2001 Type of control CNC Storage location Monheim (Germany) Country of origin Germany Delivery time Immediately Freight basis Ex warehouse, loaded on truck Technical details: grinding length 4200 mm Dsdpsyhcxqsfx Ac Nskh grinding width 1300 mm workpiece height 550 mm Control SIEMENS 840 D magnetic clamping plate 4200 x 1300 mm segment head diameter 1400 mm grinding motor turning speeds up to 320 U/min. grinding motor 306 kW weight of the machine ca. 50,0 t Additional information: Segment dimensions: 120/106 x 41 x 250 mm Number of segments: 1 set = 26 pieces Grinding motor feed: 0.5 - 35 m/min, infinitely variable Grinding motor feed: - in steps: 0.002 - 1 mm continuous: up to 5 mm/min. infinitely variable Equipment: * CNC-control SIEMENS Sinumerik 840 D * Automatic hydr. swivelling of the grinding motor from hollow to cross grinding * NC-controlled adjustment of the Marposs measuring head by means of precision support. - new grinding dimensions can be entered into the control, whereby the the grinding head automatically adjusts to the corresponding height. * Dresser with adjustment axis in the machine bed * Coolant system * Electro-magnetic table * Switch cabinet * Oil mist extraction * Documentation Dimensions (length x width x height) Bed: 11800x2200x1400 mm, weight 27500 kg Grinding head: 3000 x 2500 x 3100 mm, estimated weight 14 t 2 x Oil mist extraction: 1200 x 800 x 2000 mm each Control panel: 1200 x 800 x 400 mm Small control cabinet: 1400 x 1400 x 800 mm 2 x gears each 1200 x 800 x 500 mm Control cabinet: 1600 x 800 x 2000 mm Control cabinet: 3400 x 600 x 2400 mm