Condition: used, Vacuubrand Type: MV 10C EX VARIO VACUUBRAND VARIO chemical diaphragm pump Technical data: Max. pumping capacity 50 Hz 8.1 m³/h Ultimate vacuum 2 mbar / 1.5 torr Ultimate vacuum with gas ballast 10 mbar / 7.5 torr Number of cylinders 8 Number of stages 4 Vacuum gauge / controller type without controller Ambient temperature, lower limit, operation, in °C 10°C Ambient temperature, upper limit, operation, in °C 40°C Ambient temperature, lower limit, storage, in °C -10°C Ambient temperature, upper limit, storage, in °C 60°C Max. outlet pressure absolute in bar 1.1 bar Suction-side connection small flange KF DN 25 Pressure-side connection small flange KF DN 16 Rated power in kW 0.5 kW Minimum speed VARIO in min-1 30 min-1 Maximum speed in min-1 1500 min-1 Rated speed in min-1 1500 min-1 IP protection class according to IEC 60529 IP 54 Dimension L in mm 560 mm Dimension W in mm 457 mm Dimension H in mm 410 mm Weight in kg 61 kg Noise (sound pressure level) in dBA at 50 Hz or 1500 rpm/62% (VARIO)/1500 rpm (VARIO-SP)/12500 rpm (VACUU·PURE®) 42 dBA EX approval pumping chamber (pumped gases): II 2G Ex h IIC T3 Gb X, outdoor area with inert gas purging: II 2G Ex h IIB T4 Gb X, outdoor area without inert gas purging: II 3G Ex h IIB T4 Gc X, motor: II 2G Ex db IIB T4 Gb NRTL certification No Nominal voltage range 1 (in V) 230 V Mains frequency voltage range 1 (in Hz / DC) 50 Hz Weight 61 kg Dodpfx Aozgci Sjiiekw Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Year of construction: 2015, machine/vehicle number: MB536013A, functionality: fully functional, power: 28 kW (38.07 HP), input voltage: 400 V, input current: 54 A, input frequency: 50 Hz, overall weight: 2,800 kg, We are offering this used COSTA MD5CC 1350 belt grinding machine, manufactured in 2015. Model: MD5CC 1350 Djdpfxjzlcipe Aiijkw Serial number: MB536013A Voltage: 400 V Frequency: 50 Hz Power: 28 kW Current: 54 A Year of manufacture: 2015 Total weight: 2800 kg If you have any questions or require further information, please do not hesitate to contact us.

Condition: as good as new (ex-display), Year of construction: 2020, operating hours: 200 h, functionality: fully functional, workpiece weight (max.): 150 kg, grinding length: 500 mm, grinding wheel diameter: 455 mm, grinding diameter: 300 mm, workpiece weight between centers: 150,000 g, type of input current: three-phase, workpiece diameter between centers: 500 mm, grinding wheel width: 75 mm, spindle speed (max.): 500 rpm, spindle speed (min.): 10 rpm, grinding spindle motor power: 7,500 W, overall weight: 4,600 kg, Demonstration CNC cylindrical grinding machine with automation setup Brand OKAMOTO Model OGM-350 P NCIII Year of manufacture 2020 Control: Fanuc Oi Model D Operating hours: approx. 200 hours Technical specifications Maximum swing diameter: 320 mm Maximum distance between centers: 500 mm Maximum workpiece diameter to be ground: 300 mm Maximum workpiece weight between centers: 150 kg Maximum workpiece weight: flange + chuck + workpiece: 40 kg Dkodpfx Aiozn U S Ieiew Grinding wheel: Diameter x width x bore: 455 x 75 x 127 mm Wheel speed: Continuously variable Circumferential speed: 45 m/sec Grinding headstock (x-axis) Maximum travel: 300 Swivel angle: Non-swivel Workpiece table (z-axis) Travel: 870 mm Swivel angle: 0 – 10° Workhead Fixed/Live Center Design MK 4 Taper Chuck Spindle Bore Diameter 20 mm Spindle Speed ​​10 – 500 rpm Swivel Angle: Non-Swivel Tailstock Tailstock Type: Manual Fine Taper Adjustment Quill Travel 30 mm MK 4 Taper Chuck Drive Power Grinding Wheel Drive 5.5 kW Total Power 20 kVA Dimensions/Weight Length x Width x Height approx. 3400 x 2330 x 1950 mm Machine Weight approx. 4,600 kg Standard Equipment: 2 Carbide Centers Full FANUC Keyboard with Radius Compensation for Creating ISO Programs Workshop Programming: Graphic Software for Grinding and Dressing Cycles with Teach-in Function GAP Eliminator Shoulder Positioning Constant Table coolant flush 3 color LED lamp Documentation Leveling screws and support plates Operating tool set Accessories Automation preparation Automatic door Automation interface Grinding wheel guard fully open when door is open Miscellaneous Signal lamp Tailstock with electric quill retraction 1 flange 1 grinding wheel Options upon request: Paper belt filter on request Clamping devices on request Commissioning and training on request (Commissioning by Okamoto is required for warranty purposes) Transport on request

Condition: good (used), Year of construction: 2015, functionality: fully functional, Vollmer sharpening machine for band saws, robust design. Blade width up to 360 mm. 2 switchable tooth profiles. Dkedpfxoz Ad R No Aiiew Grinding wheel: CBN, 250 mm diameter, or ceramic grinding wheels.

Condition: excellent (used), Year of construction: 1971, Tos cylindrical grinding machine Complete with all accessories. Dodpez N Snzsfx Aiijkw

Condition: excellent (used), Year of construction: 2018, Walter Trowal CF 200 Useful volume of the working container: 125 l Filling quantity of ceramic grinding media: 200 kg Filling quantity of grinding media: 150 kg Dksdpfoz N Ti Hjx Aiiew Max. drive power: 4 kW Speed: 1,000 – 1,500 rpm Static fundamental load: 9,600 N Dynamic fundamental load: 14,700 N

Condition: excellent (used), Year of construction: 1986, 2 x conventional Thread grinders Buderus-Lindner GUS-B Max. working diameter: 250mm Max. working length: 700mm Year of manufacture: 1986 2 x dressers Many change gears Djdjz Tfrnopfx Aiiskw Grinding wheels Additional flanges Many other accessories

Condition: used, machine/vehicle number: 91-7529, with machine light Dkjdpfjz Nhmajx Aiisw

Condition: used, Year of construction: 2006, machine/vehicle number: 65126, Grinding area: 630x350 mm, grinding wheel diameter: 350 mm, magnetic clamping plate, size: 600x300 mm, with coolant system, fleece filter system and automatic depth feed. Dsdez Nhqxepfx Aiijkw

Condition: used, machine/vehicle number: 62220966, Max. grinding wheel diameter: approx. 250 mm, grinding area: 350x150 mm, with magnetic clamping plate, machine light, and coolant system. Dsdpez Nhr Njfx Aiijkw

Condition: good (used), Year of construction: 2000, functionality: fully functional, Grinding length 650 mm, grinding width 300 mm Table longitudinal travel, X-axis, max. 840 mm Table transverse travel, Z-axis, max. 310 mm Max. distance between table and spindle center 600 mm Automatic vertical feed 0.001–0.099 mm Rapid traverse for vertical movement Including: Electromagnetic clamping plate 600x250 mm Coolant system with fleece filter Dksdpfxs Aa Agze Aiijw Grinding mist extraction system with separator LTA

Condition: reconditioned (used), Grinding wheel dimensions (od x id x width): 610 x 355 x 304.8 mm Min/max diameter to be ground: 2 / 150 mm Regulating wheel speed steps: infinite Min/max regulating wheel speed (rpm): 10 / 225 rpm Dressing (auto/manual): Automatic - CNC Lubrication (auto/manual): Automatic Control type (CNC/manual): CNC CNC brand: FANUC CNC model: Oi TD Plunge (auto/manual): Automatic Regulating wheel dimensions (od x id x width): Ø350 x Ø203.2 x 355 mm Maximum plunge grinding length: 355 mm Coolant motor power: 0.70 kW Grinding wheel head motor power: 37 kW Total power: 45 kW Dkjdeydqfwspfx Aiiow Voltage: 220/380V Length: 1,165 mm Width: 3,398 mm Height: 1,700 mm Weight: 14,000 kg Accessories: Inline loader, Coolant filter, Supporting rulers

Condition: used, Year of manufacture: 1994 Colour: Grey Empty weight: 2.000 kg - Year: 1994 - Serial number: 8139 - Drive system: Conventional - Power [kW]: 7.1 - Number of axes [pcs]: 3 - X-axis travel [mm]: 600 - Y-axis travel [mm]: 350 - Z-axis travel [mm]: 600 - Table width [mm]: 1500 - Table depth [mm]: 400 - Magnet width [mm]: 600 - Magnet depth [mm]: 300 - Max. grinding wheel diameter [mm]: 300 - Max. grinding wheel thickness [mm]: 50 - Main spindle power [kW]: 4.5 - Max. spindle speed [rpm]: 1750 - Transport weight [kg]: 2000kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Dkjdpfsyvf Tgex Aiijw Lukas van Rossum

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, grinding length: 350 mm, grinding width: 160 mm, type of input current: three-phase, overall weight: 740 kg, rotational speed (max.): 2,900 rpm, power: 1 kW (1.36 HP), input voltage: 200 V, disc diameter: 250 mm, Equipment: documentation/manual, Manufacturer Mitsui MGG CO.LTD Type: MSG-200M Year of manufacture:1991-4 Maximum grinding width: 160 mm Maximum grinding length: 350 mm Maximum table length movement: 360 mm Djdpfewvf Hbjx Aiiokw Maximum table length movement: 200 mm Table movement per handwheel revolution: 3 mm /revolution Grinding spindle speed: spindle: 2900 rpm 50 Hz Standard grinding wheel diameter: 200 mm Grinding wheel width: 25 mm Grinding wheel speed: 2900 rpm 50 Hz Grinding wheel bore diameter: 31.75 mm Electrical power: 2 HP 1 kW 4P 200V 3 phase Weight, approx. 740 kg

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, power: 1.5 kW (2.04 HP), input voltage: 200 V, Mitsui precision grinder, surface grinder manufacturer Mitsui MGG CO.LTD type: MSG-250H2 year of manufacture:1990-6 Table width: 200mm Table length: 480mm Table longitudinal movement, maximum: 520mm Table lateral movement, maximum 250 mm Dsdpfx Aiswviarsijkw Table movement: 5-20m/min Forward-backward feed: Per revolution: 6 mm Per scale: 0.02 mm Lateral feed: Per revolution: 6 mm Per scale: 0.01mm Grinding spindle speed: 2900 rpm 50 Hz Table total length: 1385x285 mm Magnetic table: 300x130x100 mm Coolant unit, Maximum height from table surface to center of grinding wheel axis: 400 mm Grinding wheel diameter, standard: 205mm Grinding wheel width: 20mm Wheel spindle speed: 2900 rpm 50Hz Grinding wheel bore diameter: 31.75mm Electrical power: 2 HP 1.5 KW 4P 200V 3 phase Weight, approx.: 1105 kg

Condition: good (used), Year of construction: 1997, Rollomatic CNC 600 X Tool Grinding Machine TECHNICAL DATA X-axis: 228 mm Y-axis: 177 mm Z-axis: 52 mm A-axis: -15 to 90° B-axis: -110 to 40° Dkjdpswf Nn Iefx Aiisw C-axis: 360° Resolution: 0.0001 mm Rapid traverse: 12 m/min Grinding spindle angle: 105° Power: 4.1 kW Speed: 2000 – 7200 rpm Max. grinding wheel diameter: 150 mm Dimensions: 2060 x 2032 x 1880 mm Weight: 3500 kg SCOPE OF OFFER Among other things: (list not exhaustive): Rollomatic CNC tool grinding machine, year of manufacture: 1997 Rollomatic Pick and Place Robot Exact scope of supply as per photo gallery No liability is assumed for the accuracy, completeness, or timeliness of the information provided.

Condition: used, Table size: 800 x 350 mm Grinding wheel: 380 x 50 mm Grinding wheel dressing device, paper filter system Dsdpfx Aj Aa Dtisiiokw

Condition: excellent (used), Year of construction: 1982, KLINGELNBERG SNC 30 GRINDER Brand: Klingelnberg Model: SNC 30 Type: Industrial grinder Year: 1982 Serial number: 3837 FEATURES: – Complete machine – Hydraulic unit and filtration system included – Heavy-duty industrial installation Djdpjy S Akpefx Aiiokw – Precision machine – Equipment visible in the photos

Condition: used, Grinding spindle drive: 0.5HP, drive: Vibration-damped electric motor, power transmission: Endless woven flat belt, grinding carriage oscillation rate: 55 or 109 strokes/min, continuously adjustable oscillation stroke: 0-3⅛in, max. oscillation stroke: 79.375mm, pantograph ratio: 50:1, profile reduction: Factor 50, lateral clearance angle: ±10°, front clearance angle: 0-35°, an on-site inspection is possible. Dodpfx Ae Adt Hgoiiekw

Year of construction: 1989, condition: used, Max. grinding length: 600mm, max. grinding width: 400mm, max. working height with new/worn grinding wheel: 550/650mm, max. workpiece weight: 300kg, clamping surface: 1020x300mm, number of T-slots: 1, T-slot width: 10mm, max. height above floor level: 1005mm, dimensions: 3140x2900x2140mm, weight: 2.9t, with electromagnetic chuck: 600x300mm and coolant system. An on-site inspection is possible. Dksdpfx Aij Adt Hysiew

Year of construction: 1959, condition: used, Operating voltage: 380V, connected load: 3.05kW, weight: 1.1t, an on-site inspection is possible. Dkodpfx Aie Aalnzjisw

Condition: used, Year of construction: 1995, Surface grinding machine Manufacturer: Jung Type: JA 500 CNC-C Year of manufacture: 1995 Overhauled in: 2003 Dksdswp E Rgjpfx Aiiew Grinding length: 500 mm Grinding width: 200 mm Maximum workpiece height: 250 mm Table dimensions X/Y: 600 mm / 200 mm Grinding wheel diameter: 225 mm Grinding wheel width: 25 mm Grinding wheel bore: 51 mm Rotational speed: 4,200 rpm Machine weight: approx. 2,500 kg 31126ä

Condition: refurbished (used), functionality: fully functional, type of input current: three-phase, rotational speed (max.): 1,750 rpm, rotational speed (min.): 1,450 rpm, Equipment: type plate available, Refurbished Landert motor Manufacturer: Landert Motoren AG Bülach Type 132S-RFA4A, 1450/1750 rpm, 400V, 50/60 Hz, 5.5 kW (Worm gear drive) Nameplate present Price negotiable Our asking price is €1,150.00 net ex works, plus packaging costs. Dsdpfsw Rn Hxox Aiiskw All technical specifications are subject to printing errors and inaccuracies. Sale exclusively to countries within the EU.

Condition: good (used), Professional SUHNER Rotofix workshop grinder equipped with a flexible working shaft. Robust industrial design intended for grinding, polishing, and metalworking. Device from the renowned SUHNER brand – manufactured in Germany/Switzerland. Technical condition: the device is fully functional. Visual condition: see photos – normal signs of use. Important: The grinder has cracks in the housing, visible in the photos. Additionally, one of the legs/mounting elements has been repaired previously. This does not affect the normal operation of the device – the equipment is functional and ready to use. Technical data: Manufacturer: SUHNER Model: Rotofix Motor: DKM 2 Power: 0.5 kW Power supply: 220/380V Rotational speed: 2800 rpm Frequency: 50 Hz cos φ 0.8 Protection class: IP41 Insulation class: E Included: SUHNER Rotofix grinder, flexible shaft, working end visible in the photos. Ideal for: metalworking workshop, polishing, grinding, metalworking, Dedjz Sm Ehspfx Aiijkw industrial and manufacturing tasks.

Condition: excellent (used), For sale: a professional milling cutter and drill sharpener, model PP U3. In very good condition, the device is complete and ready for use. The set includes: • a set of grinding wheels • an adjustable angle vise • a workshop lamp on a flexible arm • wrenches and fastening elements Dkedpez Slf Tefx Aiijw Parameters: • for sharpening cylindrical and spiral shank milling cutters • for sharpening stepped and cylindrical drills • linear speed of the wheel up to 35 meters per second • maximum noise level of 66 decibels • device weight: 41 kg A robust and stable design, ideal for precise tool machining. A reliable solution for toolrooms, CNC workshops, and machine shops.