Used spindle moulders / table mills for sale (146)

Condition: used, Year of construction: 1994, Motor 6 / 7.5 kW Worktable: 1200 x 730 mm + extensions Worktable height: 920 mm Spindle tilt: -10° + 45° Max. spindle projection above table: 175 mm Spindle speeds: 3250/6500-5000/10000 rpm Max. tool diameter: 250 mm Weight: approx. 950 kg Storage location: Nattheim Hodpfsw Enw Iex Adaeh

Condition: used, Year of construction: 2019, incl. 4-roller feed unit Felder Variofeed 4 (3-18 m/min.) electronically controlled height and angle adjustment milling spindle D=30 mm Centrex access protection for milling milling fence max. cutter diameter 250 mm infinitely variable fine adjustment of the take-off side +35/-10 mm with digital display complete fence position-controlled adjustable milling fence can be folded up and down milling fence rails 550 mm ALU anodized with safety rulers quick clamping of the milling fence extension frame 1270 mm with emergency stop EURO run-in protection 5.5 kW motor with variable speed control speed range: 1500 - 10000 rpm speed range: 8000 - 15000 rpm HG spindle control panel at eye level with x-motion control table size: 1160 x 770 mm table opening: 320 mm swing-away device for feed unit on F 900 incl. extension for feed unit Hedpfx Adsxta Dyeash Location: Supplier

Condition: used, Year of construction: 1996, Incl. 3-roller feed, control panel on top, table extensions, pull-out support, tilting from -5° to +45°. Location: supplier Hjdpfjyfp N Rsx Adaoh

Condition: excellent (used), CATALOG NUMBER 7855 Technical specifications: - Spindle diameter: 40mm - Spindle working height: 160mm - Interchangeable spindle - Spindle locking Hodjx Ifbvepfx Adash - Height adjustable up/down - Original cast iron fence with full adjustment - 4 spindle speed settings + forward/reverse: 3000, 4500, 6000, 9000 rpm - Table dimensions: 1520x1000mm - Extendable table support - With side carriage for tenoning - Carriage with height adjustment - Electric brake - 3-roller power feed - Number of speeds: 4 - Forward/reverse rotation - Power feed motor: 0.65 kW - Main machine motor: 5.9 kW - Extraction port diameter: 3x120mm - Overall dimensions (L/W/H): 2030x1250x1400mm - Weight: 1100kg ADVANTAGES – Made in Poland – Top-mounted control panel – With side carriage for tenoning – 3-roller power feed – DTR technical documentation included – Not repainted – Used spindle moulder, in very good condition Net price: 16,900 PLN Net price: 4,020 EUR Net price calculated at 4.2 PLN/EUR exchange rate (Price may change in case of major exchange rate fluctuations)

Condition: used, Year of construction: 2001, spindle tilting: Ja -25 bis +45° height adjustment: elektrisch tilting adjustment: elektrisch read out tilting: digital read out spindle height: digital read out fence: Siko Zähler spindle diameter: 30 mm speeds: 1.500/3.000/4.000/4.500/5.000/6.000/8.000/9.000/10.000 U / min Hjdpfxewx Nnbs Adajh motor power: 7,5 kW motor brake: Ja, automatisch feeder: Wegoma 4 Rollen suction connection: 2 x 120mm machine length: 1900mm machine depth: 1400mm weight: 1000 kg

Condition: used, Year of construction: 1979, Spindle tiltable: No Height adjustment: Handwheel Cutter jaw adjustment: Manual Height indicator: Scale Fence indicator: Scale Spindle diameter: 30 mm Speeds: 3000, 4500, 6000, 9000, speed display defective Hsdpfx Asyffx Uedajh Motor power: 5 / 6 kW Motor brake: Yes, manual Extraction connection: 120 mm Machine length: 2500 mm Machine depth: 900 mm Weight: 800 kg

Condition: used, Year of construction: 2001, - Year: 2001 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 8756 - Main motor power [kW]: 7.5 - Table length [mm]: 2500 - Table width [mm]: 500 - Max. tool diameter milling head [mm]: 160 - Max. tool diameter pen cover [mm]: 160 - Motor braked: Yes - Feeding device present: Yes - Brand: Mec4v - Type: Mec4v - Number of wheels [pcs]: 3 - Number of speeds: 2 - Guide present: Yes - Brand: Aigner - Options: Tenoning hood - Spindle speed: Manual - Min. spindle speed [rpm]: 3000 - Max. spindle speed [rpm]: 10000 - Spindle speed control: Incremental Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Hjdpfx Aowwa Hrjdaoh Yorick Diebels

Condition: repair required (used), Year of construction: 1987, functionality: limited functionality, Table milling machine with 2 milling spindles Table size: 1,500 x 800 mm Extendable rail on the table, length 2,500 mm Rail extendable up to approx. 640 mm from table front edge 2 extension pieces for the rail, each L = 850 mm Spindle diameter: 30 mm Usable spindle length approx. 140 mm Spindle 1 height-adjustable with mechanical digital display Spindle 2 height- and side-adjustable, with mechanical digital displays Max. tool diameter approx. 180 mm Distance between spindles approx. 550 mm Hedpeycq Ayjfx Adajh Milling spindle locking mechanical via lever 2 motors, each 4.5 / 5.5 kW Motors with pole-changing function Forward/reverse operation 6 spindle speeds: 3000/4000/5000/6000/8000/10000 rpm Pneumatic milling spindle braking 2 extraction ports, diameter 120 mm Connection data: 400 V, 50 Hz, 3 Ph, N Additional notes: + Spindles heat up during operation. Therefore, likely necessary to replace bearings (not included in price) + Table insert rings for milling spindles are missing.

Condition: good (used), Year of construction: 1980, Table dimensions 1.100 x 760 mm Hsdjxzuwwepfx Adash Motor output 4,7 kW Spindle diameter 30 mm reus 3.000/4.500/6.000/9.000 U/min

Condition: refurbished (used), Year of construction: 2025, Dear customers, we are currently offering, upon request/order, a refurbished table router, type FZ0 by F. Zimmermann. Here are the machine's technical specifications: Worktable: 590 x 420 mm Rotary movement: 360° Tilting: 2x90° Spindle power: 0.25 kW Speed: 22,000 rpm Tool holder: collet chuck with clamping nut Ø 8 mm - CE marking Hjdpoxlzg Hsfx Adajh - Vernier stop - Plexiglas milling guard - Original base cabinet (optional) Dimensions: 1,100 x 1,180 x 1,760 mm Weight: 120 kg The machine has been repainted in RAL 7035 light grey, drives have been cleaned, inspected, and equipped with a new belt. With the machine, you will also receive an angle table and a set of milling tools – in other words, a complete setup! VAT is itemized separately on the invoice. Shipping available at an additional charge. Current delivery time: 6 weeks If you have any questions, please feel free to contact us!

Condition: good (used), functionality: fully functional, Spindle moulder, Type F - Year of manufacture: 1977 - 3, 4, 5, 6, 8, 10,000 rpm - Forward/reverse rotation Hodpfxex E Dcto Adajh - Spindle diameter: 30 mm - Clamping length: 140 mm - Wooden fence with fine adjustment, rotatable - Table size: 1200 x 800 mm - Weight: 700 kg - Equipped with Holz Her 3-roller power feed - MARGIN TAXED (differential taxation)

Condition: used, Year of construction: 1981, Distance between centers: 1300 mm Copy length: 1250 mm Machine center height: 250 mm Center height above support: 160 mm Slide feed speed: 3 m/min Weight: 630 kg Speeds: 500-1000-1500-3000-2100-4200 rpm Hydraulic Storage location: Nattheim Hedpfx Adjvvkt Ijaoh

Condition: used, Year of construction: 1973, Storage location: Nattheim Hsdpovvkt Uefx Adaoh

Condition: used, Year of construction: 1991, Eye-level control panel, Aigner integral stop including feed with sliding carriage (without stop ruler), milling stop with digital display and swivel mechanism Storage location: Nattheim Hodpfov Ai N Ujx Adash

Condition: used, Swiveling aggregate, chain width 10 mm Storage location: Nattheim Hodpfx Adjvvku Eoajh

Condition: excellent (used), Year of construction: 1983, Used machine M.Nr. V130296 Year of manufacture: 1983 Motor data: 380 V - 50 Hz - 13 A Rigid 30 mm spindle Height adjustment via handwheel Forward/reverse operation Extraction ports: 1 x 140 mm - 1 x 100 mm Max. cutter: 250 mm diameter - Max. slotting tool: 400 mm diameter Speed: 3000/4500/6000/9000 rpm Table length: 1200 mm Table dimensions: 900 mm x 280 mm Weight approx.: 950 kg Haffner 3-roller feed Top milling fence with fine adjustment External dimensions W/D/H approx.: 1250/1200/1400 mm Location: ex stock 54634 Bitburg - immediately available - Hodpfx Aeyb T T Ejdaoh

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, For sale: FORMAT-4 Profil 45 Z spindle moulder with x-motion control, year of manufacture 2017. The machine is in excellent condition, as it has seen very little use. Equipment / Features: Model: FORMAT-4 Profil 45 Z Version: Spindle moulder with x-motion control Year: 2017 Precision and robust industrial design Suitable for professional use Hsdpsyfgbdefx Adajh Condition: Very good condition Technically flawless Hardly any signs of use If you have any questions or require further information, please send us a message or call us.

Condition: used, Year of construction: 2006, total height: 1,800 mm, total width: 1,250 mm, total length: 2,650 mm, Spindle moulder, milling machine Casadei F222L Spindle diameter: 50mm Tiltable 45 degrees. Serial number: 06T3001 Weight: 891 kg 10 KW 400 V Including Maggi feeder - Year: 2006 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 06T3001 - Main motor power [kW]: 10 - Spindle diameter [mm]: 50 - Tiltable spindle: Manual - └ Max. tiltability [°]: 45 - Transport dimensions: 2650mm x 1250mm x 1800mm (l x w x h) Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Hodpfxownhybs Adash Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), Year of construction: 1994, functionality: fully functional, Forward/reverse operation, 3–1,000 rpm, brake motor with Haffner 3-roller feed, 8 speeds, good condition. Transport available at additional cost! Hedpfeybv A Aox Adaeh

Condition: excellent (used), SCM TF130 Class Spindle Moulder Long tables with extension Hedpfx Aoydvtyedash Table length: 253 cm Spindle diameter: 30 mm 5.5 kW motor with brake Left/right spindle rotation 5 spindle speeds Spindle lock Machine is in very good condition.

Condition: used, machine/vehicle number: 41355, AIGNER Integral Fence 650/650 Used Machine No. 41355 Article Number: JA_G260101 Hedpfxsydvkfo Adash Condition / Work Carried Out • Item cleaned • Functionally tested • Age-related and usage-related signs of wear • Available from stock Note on used equipment: • Prices are ex-works (unless otherwise stated!), ex our location in Ottendorf-Okrilla, Germany – loaded free of charge! (unless otherwise stated) • Subject to prior sale! • You will receive an invoice with VAT shown separately. • All items are sold as inspected, without any warranty claims. Buyers are welcome to inspect the items on site. • Our general terms and conditions apply. • Special agreements are possible only in written form. • Any items shown in the background are not included in the scope of delivery. • Saw blades are for illustration purposes only and are not included in delivery. Shipping Options: • We will gladly provide you with a transport quote. • Collection from our site in Ottendorf-Okrilla, by appointment, free of charge. (Assembly and commissioning for demonstration purposes can be arranged at extra cost.) • Delivery may be partially disassembled. • Optionally, our trained service staff can assemble the machine at your location and provide a brief introduction. Travel and service time will be charged extra.

Condition: used, Year of construction: 1993, Used machine Year of manufacture: 1993 Equipment and technical data: - Fixed milling spindle; newly fitted bearings - with table extension and extendable frame support 2500 mm - Motor 5.5 kW - Speeds 3000/4500/6000/8000/10000 rpm - Milling fence with 2 adjustment options: - complete fence - rear take-off jaws - Extraction hoods: 2 x 120 mm - Automatic motor brake - Right/left rotation Hsdpfxow I Uinj Adajh - with Haffner power feed with 4 rollers Weight approx. 700 kg Availability: by arrangement Location: Flörsheim

Condition: good (used), Year of construction: 1990, functionality: fully functional, Control panel at top, electric spindle lift, 30 mm spindle, electric tilting 45°, 6 speeds, motor power 7 kW, cast iron fence jaws, large table 2500 mm, Haffner 4-roller feed with 8 speeds, dimensions 2500 x 1100 x 1680 mm, weight 1000 kg, good condition Price ex location. Hsdjyaq U Depfx Adash Transport available at additional cost!

Condition: used, Year of construction: 2015, Stationary spindle moulder Table size: 1945 x 575 mm Max. spindle projection above table: 130 mm Usable spindle length: 100 mm Max. retractable tool diameter: 180 mm Spindle arbor diameter: 30 mm Spindle speeds: 3,500/7,000/10,000 rpm Motor power: 5 kW Weight: approx. 240 kg Extraction port diameter: 2x 120 mm Location: Nattheim Hjdpfxoyapvtj Adash

Condition: ready for operation (used), Year of construction: 1998, Spindle moulder T150 with feeder – €5,500 Spindle moulder T130 with feeder – €3,500 Spindle moulder SAC with feeder – €2,500 Hsdex Av Aqspfx Adaoh Set of 20 cutter tools – €2,000