Used eccentric presses single column over 100t for sale (131)

Condition: new, Year of construction: 2025, pressing force: 130 t, IMMEDIATELY AVAILABLE – (subject to prior sale) Hodpfxoxc Ugne Ag Dofr SANGIACOMO Brand new eccentric press with Siemens® PLC control Rated pressing force: 1,300 kN Table size: 1,200 x 700 mm Ram size: 750 x 540 mm Throat depth: 355 mm Shut height: 560 mm Stroke adjustment range: 16 to 200 mm Ram adjustment range: 100 mm Strokes – 55 strokes/min Drive power: 9.2 kW Dimensions approx. 2 x 1.7 m x height 3.4 m (with compensation cylinders) Weight: 10,000 kg Features: - Hydraulic overload protection - Motorized ram adjustment

Condition: used, overall weight: 11,800 kg, pressing force: 130 t, Eccentric press with pneumatic clutch Brand: Pressix Model: 130CNR6 Serial No.: 130/0/34/96 Weight: 11,800 kg Pressing force: 130 tonnes Strokes per minute: 60 Max. number of single strokes: 15 Stroke length (Min./Max.): 11 / 160 mm Slide adjustment: 110 mm High TDC adjustment: 430 mm Max. ejector stroke: 60 mm Hjdpsw N Sc Usfx Ag Djfr Table: 700x1200x78(h) mm Slide base dimensions: 550x800 mm Coupling diameter: 60 mm Throat depth: 340 mm Max. die dimensions: 550x80 mm Max. die head weight: 365 kg Includes pneumatic feeder.

Condition: refurbished (used), Year of construction: 2010, Technical main data of the PE 200 / 1400 C MA - new UVV (Accident Prevention Regulation) Nominal pressing force: 2,000 kN Stroke of ram, adjustable in steps: 21...220 mm Ram adjustment: 110 mm Throat depth: 420 mm Stroke rate in idle: 45 /min Continuously variable stroke rate: 25...80 /min Shut height (max. stroke bottom, adjustment top): 520 mm Table clamping surface (W x D): 1,400 x 800 mm Ram clamping surface (W x D): 1,000 x 600 mm Plunger bore in ram: 65 H7 Hfjdpfxjxb A Nzj Ag Der Main motor power: 15 kW Machine height approx.: 3,800 mm Machine weight: 15,900 kg - Press safety control by PILZ with plain text display PX 20 - Continuously variable stroke rate by ABB - Motorized ram adjustment - Main motor with reversing circuit - Hydraulic overload protection - Semi-automatic stroke adjustment - Foot switch, two-hand operation - Tie rods (removable if disturbing) - Additional clamping plate - Centering groove - Vibration damping feet

Condition: used, Single column eccentric press PELS - RICHTER type PEKR 125 Machine. No. 20684 Year of construction 1967 pressure force 125 ton. throat 430 mm table size 1100 x 750 mm ram area 890 x 650 mm table opening Ø 400 mm stroke adjustment 6 to 115 mm ram adjustment 100 mm installation height largest stroke top max. 450 mm Clamping spigot bore Ø 50 mm Stroke rate 60 strokes/min. Table height above floor 900 mm motor power 7,5 kW Mains connection 380 Volt, 50 Hz - Overload protection by crushing plate in ram - Compressed air clutch-brake combination DESCH - ram weight balancing cylinder - manual ram adjustment - two-hand operation - cam gear Hjdsfim Thopfx Ag Djfr - Grease central lubrication Vögele - stroke counter Space requirement L x W x H 2300 x 1450 x 3030 mm weight approx. 10 ton. good condition

Condition: good (used), Year of construction: 1984, Automatic Press Factory Warszawa-Włochy TYPE PXS 100 Eccentric Press, pressure 100 t Year of manufacture: 1984 Hodpfx Agjw Uaxzs Dofr

Condition: as good as new (ex-display), Year of construction: 2022, functionality: fully functional, throat depth: 350 mm, total height: 3,200 mm, table width: 1,100 mm, table length: 700 mm, stroke adjustment: 150 mm, total width: 1,860 mm, total length: 3,200 mm, overall weight: 8,000 kg, pressing force: 160 t, distance table to ram: 500 mm, year of last overhaul: 2025, Equipment: safety light barrier, GARNET C-FRAME ECCENTRIC PRESS MODEL: PE4-160 – SHOWROOM MACHINE DESCRIPTION: Frame constructed from welded and stabilized steel. The slide is made of welded steel, equipped with four guides and a base designed for oil collection. Transmission between the drive shaft and the eccentric shaft is via a gear reducer with ground gears; this system allows operation at high tonnage with relatively low nominal speeds. Hfsdpfx Asw S Huweg Dor Electropneumatic clutch-brake, equipped with dual-channel safety solenoid valve and cross-flow. The pneumatic system includes a compensation tank, filter-regulator-lubricator unit with control pressure switch, and safety valve. Centralized automatic lubrication with a progressive lubrication system. Electric panel with programmable PLC (Omron or Pilz) and electrical components by Siemens or Schneider. Operation by two-hand push button control and low-voltage electric foot pedal. Safety provided by photoelectric barriers and side guards with safety micro-switches for opening. Emergency stops. All components comply with CE regulations. FEATURES: • Welded steel structure with reinforced sections. • Four anti-friction sliding guides. • DIN-650 T-slots for tool clamping. • Dual operation: two-hand and foot pedal. • Piece counter system. • Programmable PLC. • Hydraulic overload release system for slide unlocking. • Two-cam rotary limiter. MODEL PE4 – 160 Nominal capacity tn 160 Strokes per minute 45 Nominal stroke height 6 mm Stroke adjustment 20-150 mm Max. closed die height 350 mm Table-slide opening 500 mm Slide adjustment 70 mm Table dimensions 700 x 1100 mm Slide dimensions 370 x 620 mm Table central bore diameter 280 mm Slide bore diameter 55 mm Throat depth 350 mm Main motor 11 kW Number of connecting rods 1 Number of guides 4 Safety light curtains yes Dual-body safety valve yes Pneumatic clutch yes Anti-vibration silent blocks yes Overall width (W1) 1800 mm Overall depth (D1) 1860 mm Height (H1) 3200 mm Approximate weight 8000 kg

Condition: new, Year of construction: 2025, drop-through hole in table: 220 mm, table width: 750 mm, table length: 1,000 mm, stroke adjustment: 140 mm, pressing force: 130 t, ram bore: 55 mm, punching force: 130 t, warranty duration: 24 months, Equipment: safety light barrier, STANDARD EQUIPMENT • Steel Construction Frame • Gear Unit Operating in Sealed Oil Bath • Four-Sided Bearing Alignment • Nodular Cast Iron Connecting Rod and Crank Bearings • Crankshaft and Drive Shafts Manufactured from 4140 Tempered Steel • Centralized Fully Automatic Grease Lubrication System • Pneumatic Clutch and Brake System • CE-Conformant Safety Standards Hodpfx Agovtyvgs Defr • Dual-Base Safety Valve • Manually Adjustable Stroke • Photocell Safety Light Curtain • PLC Control System • Touchscreen LCD Panel (for 150-300 ton models) • Dual-Hand Safety Pedal Control System • Mechanical Safety Fuse System • Hydraulic Safety Fuse System (for 200-300 ton models) • Emergency Reverse Motor Motion • Complies with Occupational Health and Safety Regulations • Anti-Vibration Mounts • CE Certified • Models Available from 20 Tons to 300 Tons • 24-Month Warranty • Country of Origin: Turkey TECHNICAL SPECIFICATIONS CECP 130 C-TYPE MONOBLOCK FRAME Capacity: 130 Ton Throat Depth: mm Table-to-Ram Distance: 475 mm Ram Adjustment: 80 mm Press Width: 1600 mm Press Depth: 2000 mm Press Height: 3000 mm Table Hole Diameter: 220 mm Table Dimensions: 750 x 1000 mm Die Tie Rod Hole Diameter: 55 mm Ram Face Dimensions: 350 x 550 mm Table Height from Floor: mm Stroke: 20 – 140 mm Strokes per Minute: 45 spm Motor Power: 7.5 kW Motor Speed: 1400 RPM Weight: 6,000 kg • As a manufacturer, technical specifications may be modified upon request.

Condition: good (used), Year of construction: 1974, pressing force: 100 t, Model: OB1 Pressing force: 100Tm Torque: 3500kg Hfedpfoudwr Ujx Ag Djr Plate thickness: 10mm Pusher slider: 5-159mm Distance between table and spindle/pusher: 530mm Max. spindle/pusher travel: 130mm Strokes per minute: 53

Condition: used, Year of construction: 1987, pressure 100 t throat 300 mm stroke 10-140 mm no. of strokes 60 Hub/min Hedpfxew E Nunj Ag Defr ram - range of adjustment 60 mm table surface area 800x500 mm ram surface 430x230 mm hole in the table Ø150 mm table height 860 mm tool hole in ram Ø 50 mm weight of the machine ca. 5,2 t

Condition: used, Single-column eccentric press WEINGARTEN type ARP 100 Machine no. No. 122481 Year of construction 1984 Pressure capacity 100 ton. throat 400 mm Table size 920 x 660 mm ram surface 700 x 450 mm Rear upright width 735 mm Stroke adjustment 20 - 160 mm Plunger adjustment 80 mm Installation height with 160 mm stroke max. 355 mm (without intermediate table top) Installation height with 20 mm stroke max. 425 mm (without intermediate table plate) Stroke rate 60 strokes/min. Table surface intermediate table top 920 x 610 mm Thickness of intermediate table top 90 mm Hole in intermediate table top Ø 210 / 180 mm Through-hole in machine table Ø 210 / 180 mm Table height above floor 800 mm (without intermediate table top) T-slot width in table and ram 22 mm Clamping pin bore 50 mm Motor power 11 kW Mains connection 400 Volt, 50 Hz - Hydraulic overload protection in ram - ORTLINGHAUS pneumatic clutch/brake combination - Electromotive ram adjustment with counter - Clamping pin bore with clamping piece Hfodpju Rwa Isfx Ag Dor - Front crankshaft support bearing - Gear reduction gears in closed oil bath gearbox - Two pneumatic tappet compensation cylinders - WOERNER automatic central grease lubrication - Lift release via electric foot switch or two-hand control panel - Electrical control cabinet permanently attached to the machine - Operating instructions and circuit diagram - UVV for manual insertion work Space requirement L x W x H 2200 x 1600 x 3250 mm Weight 8.3 tons Good condition

Condition: used, Pressure: 200 t Hfjdps Dvi Ujfx Ag Dsr Length of stroke: 40-180mm Strokes by minute: 32 Up table size: 630x500mm Down table size: 900x800mm Technical characteristics: AIR CLUTCH Power: 15 HP DIMENSIONS: Height: 3000 mms Width: 1000 mms Length: 2750 mms Weight: 14000kgr New electric system

Condition: good (used), Year of construction: 1977, Pressure 160 t Ram adjustment 75 mm Hedpevi Ikqsfx Ag Dofr Strokes/min. 30-90 Stroke adjustment 20-130 mm Power requirement 15 KW Electrical system 380 V

Condition: new, Year of construction: 2025, throat depth: 370 mm, table width: 700 mm, table length: 1,200 mm, pressing force: 300 t, power: 30 kW (40.79 HP), punching force: 300 t, warranty duration: 24 months, Equipment: safety light barrier, C TYPE ECCENTRIC PRESSES GENERAL FEATURES - Steel construction frame - Stress relief on the frame and welded parts by vibration - Table-to-table parallelism and perpendicularity tolerance in accordance with ISO and DIN standards - Pneumatic clutch and brake combination – OMPI-Italy - Ram supported by 4 guides - Parts such as ram, connecting rod, and slide block are made of cast steel, GS52 - High-strength one-piece crankshaft – 4140 - Bronze bushings in the connecting rod (Zr14) - Equipped with spare bolster table - Table-to-ram adjustment by ratchet gear (motorized for 150 tons and above) - Manual central lubrication - Pneumatic foot pedal with locking and time-controlled dual hand control - Electric counter - PLC application and touchscreen – DELTA - Electric switching components from SIEMENS-SCHNEIDER - CE application OPTIONAL - Finger protection light barriers – SICK, LEUZE - Safety PLC (controls entire electric system, valves, dual control, and pedal) – PILZ - Dual-coil safety valve – GPA, TOPAIR - Lockable limit switch and control panel Hodpow E Rkqjfx Ag Defr - Safety block - Protective guards in accordance with CE regulations TYPE C TYPE MONOBLOC FRAME Capacity 300 Ton Throat Depth 370 mm Table-to-Ram Distance 530 mm Slide-to-Table Distance 650 mm Distance Between Walls 470 mm Ram Adjustment 150 mm Approx. Press Width 2000 mm Approx. Press Depth 2700 mm Approx. Press Height 3200 mm Front Anchor Size 940 mm Side Anchor Size 1440 mm Table Hole Diameter 260 mm Table Size 700 / 1200 mm Die Mounting Hole Diameter 60 mm Ram Size 780 / 400 mm Table Height from Ground 810 mm Stroke Adjustment 20 / 200 mm Strokes per Minute 38 spm Motor Power 30 + 2.2 kW Motor Speed 1450 RPM Approximate Weight 13,200 kg

Condition: used, Year of construction: 1991, Pressure capacity 1,500 kN Hederm Nqmopfx Ag Defr Adjustable stroke 20 - 132 mm ram adjustment max. 90 mm Stroke rate 50 / 75 1/min. Further data and pictures on request used, the press is currently completely disassembled not functional and must be mechanically and electrically overhauled

Condition: good (used), Manufacturer: DIGÉP Tip: SD 100 Hfedsm Uc R Ajpfx Ag Der

Condition: used, Year of construction: 1976, pressure 100 t Hfjdpfx Agsugnpie Djr throat 315 mm stroke 8 - 112 mm table surface area 725 x 570 mm ram surface 410 x 315 mm ram adjustment 80 mm no. of strokes 55 / 82 Hub/min tool shank hole (depth x diameter) 85 x 50 mm dayligth 355 mm total power requirement 7,5 kW weight of the machine ca. 6 t dimensions of machine L x W x H 2,00 x 1,00 x 2,87 m

Condition: used, Pressure: 160t Stroke: 20-140mm Length of stroke: 50 Up table size: 600x330mm Down table size: 1000x700mm Power: 15kw Hsdpec Nt Aksfx Ag Defr Weight: 10.000kgr

Condition: good (used), Year of construction: 1977, functionality: fully functional, throat depth: 440 mm, ram adjustment: 110 mm, total height: 18,200 mm, table width: 800 mm, table length: 1,100 mm, total width: 24,000 mm, total length: 37,200 mm, overall weight: 12,600 kg, pressing force: 200 t, distance table to ram: 400 mm, power: 15 kW (20.39 HP), ram stroke: 40-180 mm Hfjdotu Hvwepfx Ag Djr incl. Helmerding feed, 400 mm x 4 mm Strokes: 40 + 60 1/min Distance table/ram - adjustment top/stroke bottom: 400 mm Table opening: 450 mm diameter

Condition: new, Year of construction: 2025, throat depth: 350 mm, drop-through hole in table: 250 mm, table width: 1,100 mm, table length: 700 mm, stroke adjustment: 190 mm, pressing force: 250 t, ram bore: 60 mm, power: 22 kW (29.91 HP), punching force: 250 t, warranty duration: 24 months, Equipment: safety light barrier, STANDARD HARDWARE Below are the technical specifications and general features for the 250-300 ton C-type eccentric press you inquired about. Hedpfovtyy Sox Ag Dsfr - Welded steel construction frame - Stress-relieved and welded components by means of vibration - Parallelism and rigidity tolerance between tables in compliance with ISO and DIN standards - Pneumatic clutch and brake combination - OMPI (Italy) - Components such as ram, connecting rod, worm gear, in steel casting GS52 - High-strength solid crankshaft – 4140 grade - Connecting rod lined with bronze (Zr14) - Spare bolster plate - Mechanical interlock safety device - Ratchet mechanism for bolster/table adjustment - Manual central lubrication system - Pneumatic pedal with lock and dual control, adjustable timing - Electric stroke counter - PLC integration and production line display – DELTA - Electrical switchgear components by SIEMENS and SCHNEIDER - CE conformity - Finger protection light curtains – SICK, LEUZE, KEYENCE - Safety PLC (oversees all electrical systems, valves, dual and pedal systems) – PILZ - Dual solenoid safety valve – GPA - Locked position switch and control panel - Mechanical safety wedge - CE-compliant protective enclosures TECHNICAL SPECIFICATIONS Type: C-TYPE MONOBLOCK FRAME Capacity: 250 Tons Throat Depth: 350 mm Table-to-Ram Distance: 520 mm Table-to-Guide Distance: 630 mm Frame Width: 520 mm Ram Adjustment: 150 mm Press Width: 2000 mm Press Depth: 2500 mm Press Height: 3100 mm Front Mounting Holes: 930 mm Side Mounting Holes: 1430 mm Table Bore Diameter: 250 mm Table Dimensions (W x L): 700 x 1100 mm Die Tie Rod Hole Diameter: 60 mm Ram Face (W x L): 670 x 380 mm Table Height from Floor: 810 mm Stroke: 20 - 160 mm Strokes per Minute: 40 spm Motor Power: 22 + 2.2 kW Motor Speed: 1450 RPM Weight: 12,000 kg *As a manufacturer, technical specifications are subject to change upon request. OPTIONAL EQUIPMENT (NOT INCLUDED IN PRICE) - 8-point slide adjustment & hydraulic safety system - Speed control - Automatic lubrication system

Condition: used, Year of construction: 1980, Pressure capacity 1,250 kN Adjustable stroke 20 - 140 mm Hfedpfx Aerm Ntpsg Dsr Stroke rate 70 1/min. Further data and pictures on request the press is currently not functional and must be mechanically and electrically overhauled

Condition: used, SCHULER TYPE 315-400 PRESSURE: 315t LENGTH OF STROKE: 30-160mm Hfodpfx Ajrgp N Hog Djr STROKES PER MIN: 36

Condition: good (used), Year of construction: 2002, functionality: fully functional, table width: 610 mm, table length: 850 mm, installation height: 300 mm, total width: 19,000 mm, total length: 19,000 mm, overall weight: 8,500 kg, pressing force: 120 t, power: 12 kW (16.32 HP), to visit under power Hedpsrwlxtefx Ag Djfr

Condition: good (used), Year of construction: 2001, Table 950x650 mm, ram 610x410 mm, stroke 0-140 mm Hfodoqgcaaepfx Ag Dor

Condition: good (used), Year of construction: 1977, functionality: fully functional, pressing force: 160 t, Weight approx. 11 t Hfjdpsvi Igxjfx Ag Der

Year of construction: 1965, condition: good (used), Table area 1,400 x 950 ram surface 1.000 x 600 Hsdpjpwgy Hjfx Ag Defr ram adjustment 135 mm Stroke 60 - 200, stroke /min. 24