Used Flywheel for sale (150)

Condition: excellent (used), 1 flywheel 1260 mm Ø, weight approx. 500 kg Ijdpfowb A Sfox Aqueic 1 flywheel, 1320 mm in diameter x 220 mm wide, approx. 40 mm ring thickness

Condition: used, mileage: 490,431 km, power: 110 kW (149.56 HP), first registration: 11/2019, fuel type: diesel, tire size: 215/60R17, axle configuration: 4x2, wheelbase: 3,400 mm, fuel: diesel, color: yellow, driver cabin: day cab, gearing type: automatic, emission class: euro6, number of seats: 2, total length: 5,500 mm, total width: 1,900 mm, total height: 2,250 mm, loading space length: 2,700 mm, loading space width: 1,520 mm, loading space height: 160 mm, Year of construction: 2019, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, navigation system, power mirror, seat heater, traction control, trailer coupling, = Additional Options and Equipment = Iiedpfsy Iriaex Aqusc - Heated mirrors - LED lamp - Manual - Radio/Cassette - Rearview camera - Seat cover = Notes = Configuration: 4x2, Payload: 806 kg, Kerb weight: 1,994 kg, Gross weight: 2,800 kg, Unbraked towing capacity: 750 kg, Braked central axle towing capacity: 2,500 kg, Tow bar, Cabin type: Single cab, Cruise control, Air conditioning, Number of airbags: 2, Rear wiper, Parking sensors: front and rear, Electric windows, Electric mirrors, Radio/Cassette, GPS navigation, Color: Yellow, Heated mirrors, Rearview camera, Lighting type: LED lamp, Seat heating, Bluetooth, Engine power: 110 kW (148 hp), Fuel: Diesel, Euro: 6, Drive technology: Timing belt, Transmission: Automatic, Power steering, ABS, ASR, Starter battery, Body type: Extended, Side doors: 1, Side window: 1, Rear closure: Tail lift, Central locking, Number of seats: 2, Seat configuration: 1+1, Seat upholstery: Seat cover, Seat adjustment: Manual, AC automatic EURO6 inverter mass flywheel/gearbox carplay, Spare wheel, Spare wheel tread: 6%, Tire type: All-season tires = Further Information = General Information Number of doors: 1 Registration number: VBZ-87-R Axle Configuration Tire size: 215/60R17 Brakes: Disc brakes Suspension: Coil spring suspension Axle 1: Tire tread left: 3 mm; Tire tread right: 3 mm Axle 2: Tire tread left: 4 mm; Tire tread right: 4 mm Weights Unladen weight: 1,994 kg Payload: 806 kg Gross vehicle weight: 2,800 kg Functional Loading platform height: 60,152 cm Maintenance APK (Roadworthiness Test): Valid until 11/2026 Condition General condition: Average Technical condition: Average Optical condition: Average Damages: None Number of keys: 3 Financial Information Lease price: €138 per month (van, 72 months); Please ask for further information and conditions = Company Information = Kleyn Trucks is one of the world's largest independent dealers of used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractor units, and trailers. Our range includes all European makes, years of manufacture, and price categories. Why buy from Kleyn Trucks? Simple! • Large, rapidly changing inventory • Recognizable quality • Good prices • Professional business conduct • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration plates arranged quickly • Expert technical services • Security of “recognizable quality” • And more.... Please visit our website for special offers and the complete stock list: Leasing via Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and send a request via our website. Ask directly about our European warranty package.

Condition: good (used), Adast Maxima MS 58S Guillotine The machine is fully operational, in excellent technical and visual condition. It has just been serviced. The set includes a spare knife, cutting stick, paper stacker, and tools. Technical specifications: Working width: 580mm Stack height: 85mm Iodpfx Aqszdatdjujic Power supply: 380V Weight: 450kg All key components are made of cast iron, including a flywheel and adjustable pressure force – this is a professional production guillotine in a compact design. Electronic approach controller, cutting line, and safety guards.

Condition: used, Year of construction: 1970, machine/vehicle number: P5063870, functionality: not functional, power: 4.05 kW (5.51 HP), input voltage: 380 V, type of input current: three-phase, pressing force: 75 t, table width: 800 mm, table length: 620 mm, table height: 740 mm, throat depth: 300 mm, distance table to ram: 450 mm, total length: 2,000 mm, total width: 1,200 mm, total height: 2,700 mm, overall weight: 4,475 kg, year of last overhaul: 2026, punching force: 75 t, compressed air connection: 8 bar, control cabinet height: 1,300 mm, control cabinet length: 350 mm, control cabinet width: 500 mm, DGUV certified until: 05/2027, drop-through hole in table: 250 mm, height adjustment type: mechanical, installation height: 450 mm, mount diameter: 40 mm, ram adjustment: 80 mm, ram bore: 40 mm, stroke adjustment: 140 mm, Stroke adjustment 16-140mm Mechanical safety guard Flywheel drive with reversible idler gear Overall height with raised safety guard approx. 4100mm Additional clamping plate 790x610mm with insert diameter 250x120mm Spring-loaded base Iisdeyv Havjpfx Aqusc

Condition: used, Year of construction: 2014, machine/vehicle number: 42, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, total height: 2,550 mm, total length: 5,500 mm, total width: 2,200 mm, overall weight: 2,600 kg, saw band length: 5,900 mm, saw band width: 13 mm, We offer a used, fully operational CNC 020 industrial bandsaw with automatic feeder, designed for high-precision cutting of wood or composite materials. The machine features CNC control and automatic feed in X, Y, and C axes, allowing fast, accurate, and repeatable cuts up to 2000 mm in length. Technical data: CNC Cutting Length: 0 – 2000 mm Cutting Height: 0 – 160 mm Cutting Angle: +90° / -90° Cutting Depth: 100 mm Saw band: 5900 x 13 mm Flywheel Diameter: 900 mm Flywheel Upper Adjustment Range: 0 – 80 mm Flywheel Speed: 750 rpm Iedpjxm S E Ajfx Aqusic Saw Speed: 2000 m/min Flywheel Motor self-braking 15 HP Forward Movement Speed X-axis: 0 – 70 m/min Return Speed X-axis: 70 m/min Forward Movement Speed Y-axis: 0 – 20 m/min Return Speed Y-axis: 20 m/min Pneumatic Pressure: 6 BAR X-axis Motor Torque: 12 Nm Y-axis / Y2-axis Motor Torque 4.3 Nm B-axis / C-axis Motor Torque 1.1 Nm Z-axis Motor Torque: 4.3 Nm Overall Dimensions 5000 x 2200 x 2550 mm Weight CNC 020 2600 kg Additional Information: We have 4 identical machines available, all from similar years of manufacture, in good condition. Ideal for production lines requiring multiple synchronized units or for spare parts standardization.

Condition: ready for operation (used), Year of construction: 2016, stroke length: 250 mm, overall weight: 58,000 kg, Mechanical stamping press manufactured in 2016. This AIDA 315/2MR/LD/TE3 features a press capacity of 315 tons and a stroke length of 250 mm. It includes a maximum die size of 2,250 × 750 mm and a maximum die weight on slide of 10,200 kg. If you are looking to get high-quality stamping capabilities, consider the AIDA 315/2MR/LD/TE3 machine we have for sale. Contact us for further details. • Main technical data: • Press capacity: 315 ton • Rated press force: 3,150 kN • Rated capacity point: 12.7 mm above BDC • Normal crankshaft stop position: TDC • Stroke length: 250 mm • Slide adjustment: 160 mm • Shut height: 700 mm • Slide speed: 15–40 strokes/min • Maximum flywheel speed: 628.5 rpm • Maximum clutch engagements: 24/min • Stopping time: 0.386 s • Safety distance: 618 mm • Die and working area: • Maximum die size: 2,250 × 750 mm • Maximum die weight on slide: 10,200 kg • Machine structure: • Frame design: double upright (straight-side) frame • Drive system: double connecting rod (double pitman) • Slide guidance: guided slide • Motion type: mechanical crank press Iiodjzcpwispfx Aquoc • Slide movement: vertical reciprocating motion • Main axis movement: rotary crankshaft drive • Ram/slide adjustment: motorized • Cushion system: • Type: integrated drawing cushion • Maximum cushion force: 3,450 daN at 0.6 MPa • Auxiliary systems: • Counterbalance cylinders: yes (counterbalance force 102 kN at 6 bar) • Clutch & brake system: pneumatic • Lubrication system: centralized automatic lubrication • Safety system: integrated • Operator protection: included • Automation ready: yes • Performance and safety highlights: • High-rigidity double-upright frame construction • Double-pitman drive for improved slide parallelism and load distribution • Pneumatic clutch-brake for reliable operation and fast stopping • Integrated safety and operator protection systems • Designed for integration with automatic feeding and transfer systems • Auxiliary systems: • Counterbalance cylinders: yes (counterbalance force 102 kN at 6 bar) (Included) • Clutch & brake system: pneumatic (Included) • Lubrication system: centralized automatic lubrication (Included) • Drawing cushion: integrated (Included) • Safety system: integrated (Included) • Operator protection: yes (Included) • Automation ready: yes (Included) • Other optional equipment: Not included Technical Specification Stamping Force 3150 Kn

Condition: ready for operation (used), Year of construction: 2018, stroke length: 250 mm, overall weight: 58,000 kg, Mechanical stamping press manufactured in 2018. This AIDA 315/2MR/LD/TE 3 features a press capacity of 315 tons and a stroke length of 250 mm. It has a maximum die size of 2,250 × 750 mm and can accommodate a maximum die weight of 10,200 kg. If you are looking to get high-quality stamping capabilities, consider the AIDA 315/2MR/LD/TE 3 machine we have for sale. Contact us for further details regarding this machine. • Press capacity: 315 ton • Rated capacity: 3,150 kN • Rated capacity point: 12.7 mm above BDC • Stroke length: 250 mm • Slide adjustment: 160 mm • Shut height: 700 mm • Maximum die size: 2,250 × 750 mm • Maximum die weight: 10,200 kg • Flywheel speed: 628.5 rpm • Operating speed: 15–40 spm • Maximum clutch engagements: 24 per min • Stopping time: 0.386 s • Safety distance: 618 mm • Cushion force: 3,450 daN @ 0.6 MPa • Counterbalance force: 102 kN @ 6 bar • Frame type: Double upright, double-crank • Clutch/brake system: Pneumatic • Lubrication system: Centralized automatic • Slide guiding: Precision guided Iiedpfxozcptwo Aqusc • Drawing cushion: Integrated • Counterbalance cylinders: Yes • Safety system: Integrated • Operator protection: Yes • Automation ready: Yes • Drawing cushion: Integrated (Included) • Counterbalance cylinders: Yes (Included) • Safety system: Integrated (Included) • Operator protection: Yes (Included) • Automation ready: Yes (Included) • Other optional equipment: Not included Technical Specification Stamping Force 3150 Kn

Condition: ready for operation (used), Year of construction: 2013, stroke length: 250 mm, overall weight: 58,000 kg, Mechanical stamping press manufactured in 2013. This AIDA 315/2MR/LD/TE 3 features a press capacity of 315 tons and a stroke length of 250 mm. It is designed for high-precision stamping operations with a robust double-upright frame and integrated drawing cushion. If you are looking to get high-quality stamping capabilities, consider the AIDA 315/2MR/LD/TE 3 machine we have for sale. Contact us for further details regarding this machine. • Main technical data: • Press capacity: 315 Ton • Rated press force: 3,150 kN • Rated capacity point: 12.7 mm above Bottom Dead Center (BDC) • Normal crankshaft stop position: Top Dead Center (TDC) • Stroke length: 250 mm • Slide adjustment: 160 mm • Shut height: 700 mm • Slide speed: 15–40 strokes/min • Maximum flywheel speed: 628.5 rpm • Maximum clutch engagements: 24 engagements/min • Stopping time: 0.386 s • Safety distance: 618 mm • Die and working area: • Maximum die size: 2,250 × 750 mm • Maximum die weight on slide: 10,200 kg • Machine structure: • Frame design: Double upright (straight-side) frame • Drive system: Double connecting rod (double pitman) • Slide guidance: Guided slide • Motion type: Mechanical crank press • Slide movement: Vertical reciprocating motion • Main axis movement: Rotary crankshaft drive • Ram adjustment: Motorized slide adjustment • Cushion system: • Type: Integrated drawing cushion • Maximum cushion force: 3,450 daN at 0.6 MPa • Systems and safety: • Counterbalance cylinders: Yes • Counterbalance force: 102 kN at 6 bar • Clutch & brake system: Pneumatic • Lubrication system: Centralized automatic lubrication • Safety system: Integrated • Operator protection: Included • Automation ready: Yes Iedpfx Aozcppxjqueic • Performance and safety notes: • High-rigidity double-upright frame construction • Double-pitman drive for improved slide parallelism and load distribution • Pneumatic clutch-brake for reliable operation and fast stopping • Designed for integration with automatic feeding and transfer systems • Auxiliary systems: • Counterbalance cylinders: yes (counterbalance force 102 kN at 6 bar) (Included) • Clutch & brake system: pneumatic (Included) • Lubrication system: centralized automatic lubrication (Included) • Drawing cushion: integrated (Included) • Safety system: integrated (Included) • Operator protection: yes (Included) • Automation ready: yes (Included) • Other optional equipment: Not included Technical Specification Stamping Force 3150 Kn

Condition: new, Used MACC SPECIAL 411 CSO Gravity descent bandsaw New CE The basic characteristics of the machine (rigidity of the blade support, flywheel sizing, band guides, band tensioning) have been carefully studied to avoid the yielding of the band, increase its duration, improve linearity and cutting time. - Sawing machine with cut by falling arc regulated by a hydraulic circuit, manual bar feeding and vice closing, manual head return. - Vertical rotation on pivot with adjustable conical bearings without backlash - Band control with two-speed motor and special reducer with bronze gear and hardened and ground worm screw - Appropriately sized flywheels - Sturdy belt guides made of watertight bearings and adjustable widia plates - Tensioning of the band obtained by means of an electromechanical device with blade rotation microswitch control - Vice with rapid approach device - Accident prevention safety device on the flywheel cover, on the control knob and on the blade - Hydraulic cylinder for controlled descent - Cutting thickness 1,2 mm - Cutting range 45° left 60° right - Adjustable stop for cuts of the same size - 24 V low voltage system - 0.06 kW electric pump for belt cooling Iijdpfx Aqsficb Touec - Pedestal with drawer for chips collection and extractable tank for the cooling liquid - Machine predisposed

Condition: new, Semi-automatic band sawing machine for cutting solid bars and profiles of medium and large dimensions with high efficiency and excellent cutting precision. The robust structure gives the machine the necessary rigidity and precision to the cutting unit. Belt control with inverter driven motor and special gearbox with bronze gear and hardened and ground worm screw. Suitably dimensioned flywheels Sturdy ribbon guides made with watertight invitation bearings and adjustable widia plates Belt tension obtained by means of an electromechanical device with microswitch blade rotation control. Iijdpfx Aqsfh R Tuouoc Accident prevention safety device on the fly cover cover and on the blade Cutting thickness 1.5 mm Cutting range 60°sx 60°dx Brush belt cleaning device Hydraulic power unit motor 0,37 kW 0.09 kW electric pump for belt refrigeration Clamp jaw height 250 mm Jaw length 200 mm Worktop height 760 mm Machine weight 1250 kg 12260 N

Condition: new, Semi-automatic band sawing machine for cutting solid bars and profiles of medium size with high efficiency and excellent cutting precision. The robust structure gives the machine the necessary rigidity and precision to the cutting unit. Belt drive with two-speed motor and special gearbox with bronze gear and hardened and ground worm screw. Suitably dimensioned flywheels Sturdy ribbon guides made with watertight invitation bearings and adjustable widia plates Belt tension obtained by means of an electromechanical device with microswitch blade rotation control Accident prevention safety device on the flywheel cover cover and on the blade Cutting thickness 1.5 mm Cutting range 60°sx 60°dx Adjustable stop for cuts of the same size Brush belt cleaning device Iisdjfibd Tepfx Aquec Hydraulic power unit motor 0,37 kW 0.09 kW electric pump for belt refrigeration Jaw height 200 mm Clamp jaw length 185 mm Worktop height 760 mm Machine weight 820 kg

Condition: new, Used MACC 320 MS Semi-automatic sawing machine Good New " CE " Data sheet attached. Ready for delivery unless sold The basic characteristics of the machine (stiffness of the blade support, flywheel sizing, belt guides, belt tensioning) have been carefully studied to avoid the belt yielding, increase the duration, improve the linearity and the cutting time. Vertical rotation on pivot with adjustable conical bearings without backlash. Belt drive with two-speed motor and special reducer with bronze gear and hardened and ground worm screw. Appropriately sized flywheels. Sturdy belt guides with watertight bearings and adjustable widia plates. Tensioning of the band obtained by means of an electromechanical device with blade rotation microswitch control. Accident prevention safety device on the flywheel cover, on the control knob and on the blade. Cutting thickness 1,2 mm Cutting range from 0 to 60° right Adjustable stop for cuts of the same size Iisdpsfibfaefx Aquec 0.06 kW electric pump for belt cooling Operation: start of the cutting cycle by start button, the machine: 1. closes the vice and drives the band motor 2. lowers the arc for cutting 3. the bow returns to the starting position 4. stops the band motor 5. opens the vice Possibility of manual cutting ACCESSORIES ON REQUEST : SINGLE-PHASE motor 69 m/1′ Speed variator from

Condition: new, The SPECIAL 411 MS MACC is a semi-automatic band sawing machine for the cutting of solid bars and profiles of small dimensions, with high efficiency and excellent precision. The robust structure gives the machine the necessary rigidity and precision to the cutting unit. The belt drive is equipped with a two-speed motor and the special gearbox complete with gear is in bronze with the worm screw hardened and ground. The flywheels are suitably sized and the belt guides are sturdy and made with watertight invitation bearings and adjustable widia plates. The electromechanical microswitch control can be used to tension the belt with the rotation of the blade. Equipped with an accident prevention safety device on the flywheel cover and on the blade, the machine is completed by a swivel table to support the material and the vice with the rapid approach device. Functioning. Start the cutting cycle using the start button, the machine: 1. closes the vice and drives the belt motor 2. make the arch descend for the cut 3. the bow returns to the starting position 4. stop the belt motor 5. open the vice Possibility of manual cutting Cutting speed (m/min) 38-77 Cutting thickness (mm) 1.2 Cutting range From 45 sx 60° dx Stop for cuts of the same size Adjustable Electropump for belt cooling 0.06 kW Iodpfx Aefh R Tysqueic

Condition: new, NEW No.1 available for immediate delivery CE Warranty The MACC SPECIAL 335 MS is a semi-automatic band saw for the cutting of solid bars and profiles of small dimensions, with high efficiency and excellent precision. The robust structure gives the machine the necessary rigidity and precision to the cutting group. The belt drive is equipped with a two-speed motor and a special reducer complete with bronze gear with hardened and ground worm screw. The flywheels are suitably sized and the belt guides are sturdy and made with watertight bearings and adjustable carbide plates. By means of the electromechanical microswitch control it is possible to tension the band with the rotation of the blade. Equipped with an accident-prevention safety device on the flywheel cover and on the blade, the machine is completed by a rotating table for resting the material and a vice with a rapid approach device. Operation. The machine: 1. closes the vice and activates the band motor 2. makes the arc descend for cutting 3. the arc returns to the starting position 4. stops the band motor 5. opens the vice Manual cutting possibility Cutting speed (m/min) 38-77 Cutting thickness (mm) 1,2 Cutting range From 45 sx 60 dx Stop for cuts of the same size Adjustable Electric pump for cooling the band 0,06 kW Cutting capacity at 0°. Iijdpfx Aeg S Ui Aequjc

Condition: new, Good brand new No. 1 available for immediate delivery! Warranty " CE " Iedpfx Aqjfibfgsujic Made in Italy Cutting capacity : 0° = round tube mm 230 - square mm 220 - rectangle mm 170 x 300 45° = round tube mm 200 - square mm 180 - rectangle mm 180 x 230 60° = tubular round mm 130 - square mm 120 - rectangle mm 110 x 130 TECHNICAL DATA AND STANDARD EQUIPMENT: Vertical rotation on pivot with adjustable conical bearings without backlash. Belt drive with two-speed motor and special reducer with bronze gear and hardened and ground worm screw. Appropriately sized flywheels. Sturdy belt guides with watertight bearings and adjustable widia plates. Tensioning of the band obtained by means of an electromechanical device with blade rotation microswitch control. Vice with rapid locking device Safety device on the flywheel cover, on the control knob and on the blade. Cutting thickness 1,2 mm Cutting range from 0 to 60° right Adjustable stop for cuts of the same size Low voltage system 24 V 0.06 kW electric pump for belt cooling The basic characteristics of the machine (rigidity of the blade support, flywheel sizing, belt guides, belt tensioning) have been carefully studied in order to avoid belt yielding, increase its life, improve linearity and cutting time.

Condition: refurbished (used), Year of construction: 2002, Sawmill ARTIGLIO Year - 2002 - ( Refurbished in 2023 ) Technical Details : - Flywheel - 1300 mm - Flywheel band - 168 mm - Max. blade length - 8860 mm - Three - Phase 400V 50hz Motors - Primary motor power - 55,8 kW - Blade tension motor - 0,55 kW - Pushing blade guidemotor - 1,5 kW - Flywheel inclination motor - 0,12 kW - Hydraulick brake unit motor - 1,5 kW - Central Crowing Iijdpev Ny Nxjfx Aqusc Equioment Consists : - 3 Log clamping pressure - Fixed hooks - Mobile knockers with 3 fixed positions - Hydraulicl log turner - El . divider with 50 works programs - Transversal vice movement with two speed motor 1,8 - 8 mt./min. - Hydrostaic advancement with steel cable towing - Comand pult - Automatic centralized rubrication - Pantograph for cable

Condition: new, Year of construction: 2026, Holzkraft HBS precision wood band saws for the craftsman Top quality, workmanship and price-performance ratio Particularly quiet and precise running thanks to a torsion-free machine housing Large-dimensioned gray cast iron saw table made from one piece, with a precisely ground and polished surface. Quick saw band tensioning via eccentric lever on the back of the machine Standard with two speeds Ijdpfx Aqjvk Sdkeujic Precise 3 roller saw band guides, standard at the top and bottom from HBS 351 Quick cutting height adjustment via rotary knob and rack with millimeter scale Smooth-running aluminum parallel stop with eccentric quick clamp and magnifying glass Standard miter angle stop, adjustable by 60 degrees on both sides Aluminum parallel stop with eccentric quick clamp Technical data: Work table dimensions: 495*356 mm Cutting speed: 650/400 m/min Flywheel diameter: 356 mm Max. cutting height: 200 mm Max. cutting width with stop: 321 mm Saw band length: 2562 mm Precision guide 3 rollers: top/bottom Saw table inclination: -10 degrees, + 45 degrees Motor power: 550 watts/230 volts Weight: 80 kg Dimensions in mm: 610*445*1753 Extraction nozzle diameter: 100 mm Location: from stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Schneider compressor UNM 510-10-90 D A714000 Mobile piston compressor with horizontal tank Standard with all safety fittings and electrical connection cable with plug and Condor pressure switch Air receiver equipped with safety valve, receiver pressure gauge and condensate drain valve. Welded rear handle improves loading and transportability Fully automatic operation due to pressure switch with start-up relief, motor protection and on/off switch With upscale equipment for universal use With V-belt drive, 2 cylinders in series arrangement for particularly smooth running and 400 V three-phase motor with external motor protection Low compressor speed - thus protecting the compressor components, lowering the noise level and reducing vibrations Large fan flywheel for optimal cooling Including filter pressure reducer for regulated compressed air, cleaned from condensate, dirt and oil With 2 m rubber-coated supply line and air outlet via quick coupling Supply line with phase inverter 10 years warranty on tank against rusting through Technical specifications Pressure 10 bar Suction capacity 510 l/min Filling capacity 390 l/min Speed 1240 min-1 Reservoir volume 90 l Weight 80 kg Noise level 97 dB(A) Dimensions (WxDxH) 1070x495x895 mm Iiedpfx Aebyhvrsquoc Drive power 3,0 kW Voltage 400 V Location: ex stock Bitburg subject to prior sale

Condition: new, Year of construction: 2026, Holzkraft band saw HBS 533 S. Heavy professional design with high dead weight for maximum running smoothness especially smooth and precise running thanks to torsion-free machine housing large dimensioned cast iron saw table in one piece, tiltable from 0° to +20° with ground and polished surface patented table tilting device with hand wheel and toothed rack saw band quick clamping ceramic saw band roller guide large cast iron parallel fence fast and precise cutting height adjustment via handwheel and toothed rack with millimetre scale safety switch for automatic shut-off when opening the door large cast iron parallel fence standard with angle stop flywheels made of grey cast iron with special coating on the running surfaces Inspection window for checking the saw blade running Professional saw table guide the heavy, massive saw table made of grey table is easily and comfortably adjusted by a handwheel rack and pinion guide system the inclination is steplessly adjustable from 0° to +20°. Patented working table dimensions 750 x 530 mm cutting speed 1400 m/min. flywheel Ø 530 mm max. cutting height 350 mm max. cutting width with fence 465 mm Iijdpfxsb S Uzks Aquec max. cutting width without fence 510 mm band saw blade length 4190 mm precision guide top / bottom saw table inclination 0° - +45° motor power 400 V/50 Hz/P2 4,0 kW Weight 305 kg Dimensions 1000 x 720 x 2040 Suction port diameter 2 x 100 mm Location: ex stock Bitburg

Condition: new, Year of construction: 2026, Holzkraft HBS precision wood band saws for the craftsman Top quality, workmanship and price-performance ratio Particularly quiet and precise running thanks to a torsion-free machine housing Large-dimensioned gray cast iron saw table made from one piece, with a precisely ground and polished surface. Quick saw band tensioning via eccentric lever on the back of the machine Standard with two speeds Precise 3 roller saw band guides, standard at the top and bottom from HBS 351 Quick cutting height adjustment via rotary knob and rack with millimeter scale Smooth-running aluminum parallel stop with eccentric quick clamp and magnifying glass Standard miter angle stop, adjustable by 60 degrees on both sides Aluminum parallel stop with eccentric quick clamp Technical data: Work table dimensions: 610 * 431 mm Cutting speed: 900/450 m/min Flywheel diameter: 430 mm Max. cutting height: 270 mm Max. cutting width with stop: 370 mm without stop: 410 mm Saw band length: 3345 mm Precision guide 3 rollers: top/bottom Saw table inclination: -10 degrees, + 45 degrees Motor power: 1550 watts/400 volts Weight: 130 kg Dimensions in mm: 680*512*2048 Extraction nozzle diameter: 2*100 mm Ijdpjvk Sd Dsfx Aquoic Location: from stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2026, Holzkraft band saw HBS 633 S (IE3) In a heavy professional version with a saw blade quick-clamping system for professional users Article number: 5150063 DESCRIPTION Heavy professional version with a high weight for maximum smooth running Particularly smooth and precise running thanks to the torsion-free machine housing Large-dimensioned gray cast iron saw table made from one piece, swivels from 0° to +45° with a ground and polished surface Patented table tilting device with handwheel and rack Saw blade quick clamping Iiedpfx Ajvk Sfbsquec Precision saw blade roller guide Fast and precise cutting height adjustment via handwheel and rack with millimeter scale Safety switch for automatic shutdown when the door is opened Large cast parallel stop With angle stop as standard Table tilt via rack and handwheel TECHNICAL DATA Dimensions and weights Length (product) approx. 1190mm Width/depth (product) approx. 820mm Height (product) approx. 2063mm Weight (net) approx. 377.7kg Extraction connection Extraction nozzle diameter 2 x 120mm Work table(s) Work table length 830mm Work table width 600mm Work table height 830mm Work table inclination 0 – 45° Explanation of work table inclination For safety reasons, a holding device/stop must be installed from 20° to prevent the wood from slipping! Electrical data Connection voltage 400V Mains frequency 50Hz Output power 4.1kW Cutting ranges Cutting height max. 90° 400mm Cutting width max. with stop 570mm Cutting width max. without stop 610mm Saw blade Saw blade speed(s) 1615m/min Flywheel diameter 630mm Saw blade length 4600mm Saw blade guide Precision guide top and bottom Location: from stock 54634 Bitburg - available immediately -

Condition: used, mileage: 807,313 km, power: 368 kW (500.34 HP), first registration: 03/2019, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 03/2026, brakes: retarder, color: green, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 3,800 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), had accident, navigation system, parking heater, soot filter, The vehicle has engine problems and is not roadworthy. The engine runs! * MAN Media Truck Advanced radio 12V * Navigation preparation * MAN-Tronic on-board computer * Multifunction steering wheel * Automatic climate control * Electric windows * Central locking with remote control * Cab / comfort features * Air-suspended cab * XXL cab with Nordic insulation * Comfort driver's seat, air-suspended, heated and ventilated * Comfort passenger seat, air-suspended and heated * Lumbar support and shoulder adjustment * Comfort quality seat covers * Ambient lighting * Tinted door and side windows * Sunblind for driver's door side window * Additional air heater Eberspächer D4S * Auxiliary air-conditioning system * Additional high beam and fog lights with cornering lights * Sound system * Exterior and wide-angle mirrors electrically adjustable and heated * Kerb mirror right electrically adjustable and heated * Cab power sockets 12V and 24V * Chrome-plated bumper trim Isdpfxjynrf Ho Aqueic * Rockinger 400 G 150 A trailer coupling * Work lights * Rear axle differential lock * Air horns * Flame-start system * Controlled rocker lever brake EVBec * Power take-off, flywheel side * Trailing axle NOL-08, steered and liftable * Front axle VOK-09, cranked * Sun visor, exterior * Wheelbase 4,800 mm * Permissible gross weight 26.0 t * Combi tank 400 l diesel + 60 l AdBlue * Axle configuration 6x2 * Engine 12.4 l diesel, 368 kW, EURO 6 * Transmission 16-speed ZF 16 S * Electronic brake system MAN Brakematic * Anti-slip control (ASR) * Leaf/air suspension --- Vehicle number: 11711 --- Subject to errors and prior sale --- Advertising and various markings have been digitally removed. We are happy to assist you with all the formalities involved in purchasing a vehicle. Simply let us know your wishes and suggestions and we will take care of them. Among other services, we can offer the following for an additional charge: * Trade-in of your old vehicle * TÜV/SP inspection * Complete export handling * Financing brokerage * Application for export number plates * Transport of vehicles * Vehicle registration * Recovery and vehicle transport – YOUR VTS TEAM

Condition: used, mileage: 388,111 km, power: 235 kW (319.51 HP), first registration: 04/2009, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro4, total width: 2,550 mm, total height: 3,630 mm, Equipment: ABS, air conditioning, Tel.: Call (Contact · Phone · Mobile · WhatsApp) Special equipment: Exhaust pipe routed high on the right, exterior mirrors and wide-angle mirrors electrically adjustable and heated, wide-angle mirror with electric maneuvering aid, battery disconnect switch (mechanical), electric and heated curb mirror on the right, CB radio roof antenna, rear axle differential lock, cab: electro-hydraulic tilting system, cab: with 2 rear wall windows (tinted), cab: with air suspension, comfort driver’s seat air-suspended and heated with lumbar support, alternator 28 V / 110 A, heavy-duty anti-roll stabilization, automatic climate control, heated air dryer, middle seat, steered and liftable trailing axle NOL-08, PTO at flywheel side, rotating beacon (2), external sun visor, cab socket 12V and 24V, control module for external data exchange, kingpin front axle VOK-09, additional high beam/fog lights with cornering light Further equipment: Axle configuration: 6x2, approach/front mirror, trailer socket 24V / 7-pin, ABS trailer socket, anti-slip control (ASR), audio system: MAN basic line radio (radio/CD), battery 175 Ah, onboard computer MAN-Tronic, electronic brake system MAN Brakematic, EURO 4 engine, cab: M (medium length), suspension: leaf/air, electric window lifters, cold start aid, tinted windscreen, 16-speed transmission - type: ZF 16 S, manual roof hatch, body/chassis: chassis, tipping lever – EVB brake, heated fuel filter, fuel tank: 400 L, raised air intake, air compressor 1-cylinder 360 cc, engine 10.5 L – 235 kW diesel, spare wheel carrier behind rear axle, disc brakes rear axle, disc brakes front axle, side guards, rear tinted side windows, sunshade roller blind for windscreen, spray suppression, stabilizer on one rear axle, front axle stabilizer, TGS, tinted door windows, underride guard rear, underride guard front, viscous fan, central locking, permissible total weight 26.0 t * VIN: WMA18SZZ29W130224 * Spring suspension front, air suspension rear * Refuse collection vehicle type: 211-2230 * Refuse collection vehicle year of manufacture: 2009 * First registration: 04-2009 Ijdpowzq Nrjfx Aqusic * Net price * All information without guarantee

Condition: used, mileage: 299,999 km, power: 110 kW (149.56 HP), fuel type: diesel, gearing type: automatic, overall weight: 3,000 kg, first registration: 12/2015, emission class: euro6, color: silver, number of seats: 8, Year of construction: 2015, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Well-maintained Volkswagen T6 Multivan Automatic, single owner, with full service history Net sale price: €15,900 Engine replaced at 182,000 km (invoice for €13,578 available) Timing belt, including water pump and tensioners, replaced at 287,000 km Flywheel replaced Inspection carried out, including transmission oil change, brake fluid, etc... Invoice for €4,290 available Last oil service at 294,577 km The vehicle had one previous owner (single owner) Rotatable seats, camping table, foldable bench seat converts into a bed, and much more. For additional features/special equipment see below: For inquiries: Christian Hirsch Please no emails – due to time constraints, emails can only be answered sporadically. Thank you for your understanding! Opening hours and further information: Viewing and purchase possible without appointment: Mon - Thu: 9:00 to 16:00 Fri: 9:00 - 13:00 Sat: 9:00 - 12:00 Address: Tabakried 11 84076 Pfeffenhausen For questions: Christian Hirsch Please try calling multiple times, as we are often with customers. Special equipment: - 2nd battery - Dashboard with additional console - BlueMotion Technology version - Mounting rails for roof rack - Electrical interface for external use (CAN data bus) with connection terminal - Driver assistance system: parking sensors front and rear - Luggage compartment divider / separating net - Luggage compartment cover / roller blind - Climatic air conditioning (cab), 2nd evaporator + additional heater (cargo/passenger compartment) - Metallic paint - Wheel trims - Mud flaps front and rear - Rotatable seats in loading/passenger compartment, 1st row, 2 swivel seats - Rear privacy glass Additional equipment: - Sliding door rail cover - Passenger airbag deactivatable - Driver/passenger airbags - Audio system Composition Audio (radio, SD card interface, MP3 playback) - Exterior mirrors aspherical, left - Exterior mirrors electrically adjustable and heated - Exterior mirror convex, right - Exterior mirrors and external door handles in black - Carpet flooring in cab - Plastic flooring in cargo/passenger compartment - Camping table - Dual-tone horn - Driver assistance: brake assist (HBA) - Multi-collision brake - Fixed windows in the cargo/passenger area, front and rear left and right - Tinted laminated windscreen - Two folding remote keys - A-pillar grab handles - Lockable glove compartment - Tailgate with window - Heated rear window with wiper - Step lighting in passenger/cargo compartment - Interior filter: pollen filter - Dimming interior mirror - Bodywork: Bus - Child safety locks on sliding doors - Fuel tank: 70 liters - Height-adjustable steering column - Bluetooth phone interface - Engine 2.0 litre - 110 kW TDI - Non-smoker package - Wheelbase 3,000 mm - Tire repair kit - Tire pressure monitoring display - Low-emission as per Euro 6 emission standard - Sliding door right side, cargo/passenger compartment - SCR system (AdBlue technology) - Side/curtain airbags, front - Upholstery: fabric - Comfort passenger seat in cab - Height-adjustable driver and passenger seat in cab - Comfort driver's seat in cab - Lumbar supports for driver and passenger in cab - 3-seater bench seat, 2nd row, rear compartment - Sun visors with mirrors - Steel rims 6.5x16 Iisdpey Rg Upofx Aquec - Engine start/stop system - 12V socket in cab - Bumpers

Condition: used, mileage: 20,319 km, power: 346 kW (470.43 HP), first registration: 12/2022, fuel type: diesel, overall weight: 27,500 kg, axle configuration: 3 axles, next inspection (TÜV): 03/2027, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), No on-board electronics. Construction site package, trailer package, anti-rollaway lock, EBS, LED lighting, gearbox function Idle Speed Driving, MAN TipMatic Efficiency driving program, differential locks on driven rear axle, 2 beacon lights on cab roof, preparation for 2 cameras, ASR (traction control), emergency brake assist, MAN Media System Advanced with 7'' navigation, MAN Advanced Sound System, navigation maps for Europe and Russia, RIO Box, smartphone integration, RINGFEDER type RF40/G 150B, tipper body 4,900 mm x 2,380 mm, Meiller type D316, 800 mm high side walls on tipper body, single-piece, swinging side walls, 1,000 mm high front wall, 800 mm high rear wall, swinging rear wall with automatic locking, 150 mm discharge chute, axial pump tipper hydraulics Meiller type 265/401 mounted on the flywheel side PTO with selectable clutch, PTO speed-dependent, trailer tipper hydraulics. Iiodpjl Eznujfx Aquec