Used Gallmac Wmw 115 for sale (459)

Condition: used, Manufacturer: WMW Type: DLZ630III5000 Centerdistance: 5000mm Turningdiameter above bed: 700mm Spindle-height: 350mm Spindle-hole: 70mm Motorpower: 15,5kW Spindle-speed: 28-1120rpm - Drive system: Conventional Ibedpfx Afswnhx Reiec - Power [kW]: 15.5 - Centre height [mm]: 350 - Swing over bed [mm]: 700 - Distance between centres [mm]: 5000 - Spindle bore [mm]: 70 - Min. spindle speed [rpm]: 28 - Max. spindle speed [rpm]: 1120 - Documentation available: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: ready for operation (used), Type: Ti 1800 Isdpfx Ajxpgklefiebc Turning table 1800 x 2000 mm Cap on Table: 15.000 kg 360° turnable cross displacement: 1250 mm 6 kW T-slot width: 28 mm T-slot distance: 160 mm Length: 3700 mm Width: 2100 mm Weight: 7600 kg Dia / Dimensions: 1800 x 2000 mm

Year of construction: 1965, condition: good (used), Radial drilling machine BR 56 x 1600 Year built: approx. 1965 (estimate) Ibjdpfx Asd R Sh Rjfisc equipped with coolant device and drilling table as special accessories Technical data: see data sheet as appendix

Condition: used, Year of construction: 2001, Technical details: pressure: 250 t throat: 360 mm Ibsdpfxjxna Uzo Afisc distance table/ram: 800 mm max. ram stroke: 500 mm ram speed - reverse: 390 mm/sec. ram speed - forward: 450 mm/sec. hydraulic-pressure: 280 bar connected load: 43 kW work speed: 11....50 mm/s operating pressure: 20 MPa total power requirement: 20,5 kW weight of the machine ca.: 17 t dimension machine xH: 3,9 x 1,9 x 4,0 m

Condition: good (used), Reamer, twist drill, drill -Twist drills: different sizes on request -different manufacturers -Price: Ø 10 - 30 mm 0.50 EUR/mm (drill Ø 20 mm = 10 EUR net) -Price: Ø 31 - 45 mm 1 EUR/mm (drill Ø 35 mm = 35 EUR net) -Price: Ø 46 - 80 mm 1.60 EUR/mm (drill Ø 50 mm = 80 EUR net) Ijdpsv H D N Rjfx Afiebc -Two-cutter -Diameter: 10-80mm -different lengths -Recordings: MK1 - MK6 -Type: HSS

Condition: good (used), machine/vehicle number: 98260075, one used profile steel shear WMW Punching capacity 420kN(42Tons) throat of the punch 320mm Isdpfx Afsb Ilbfeisbc flat steel shear shears 100x18mm bar shear shears solid material round/square 36/30mm Further technical data on request.

Condition: used, Price: On request Drilling machine, horizontal boring machine  Model: Conventional Ibodpfxownhi Ae Afijc Manufacturer: WMW Union Type: BFT 90/3-2 Including rotating table Including digital readout Including multiple belongings X-Z travel: 1600x1000 Y-travel (up-down): 1050mm W-travel: 710mm Spindlemotor: 11kW Spindle diameter: 90mm Spindlespeed: 8-1600 rpm Table: 1000x1120mm Machine-weight: 9000kg - Documentation available: No - Serial number: 90/3-2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: ready for operation (used), Type: Ti 1800 Turning table 1800 x 2000 mm Cap on Table: 15.000 kg Ibsdpfx Ajxpgkrefioc 360° turnable cross displacement: 1250 mm Rotary table dimensions: 1800 x 2000 mm Max weight on table: 15 000 kg

Condition: good (used), Heckert CWK 400 Year of construction 1995 Control Siemens 840 Travel X/Y/Z 650/650/680 mm Spindle speed up to 10,000 rpm HSK 40 Ijdpfxjru H T Ie Afiebc Tool changer Rotary table 400 x 500 mm, chip conveyor Weight 12.5 tons.

Condition: used, VERTICAL MILLING HEAD Accessory for a Fritz Heckert FSS 400 milling machine Weight: 285 kg Ibsdpfjv U I Slsx Afisc Dimensions (LxWxH): 550 x 500 x 550 mm Swivels 90° to the right / left Clamping surface: 500 x 400 mm Taper: SK 45 Flange diameter: D = 260 mm Mounting: 4 holes, diameter D = 17.5 mm *

Condition: good (used), Bench drill, pillar drill, column drill, column drill -Manufacturer: WMW Heckert, bench drilling machine type BT 2 -Clamping table: 340 x 280 mm -Travel: 350 mm -Spindle holder: MK2 -Projection: 215 mm -Speeds: 355/710/1400/2800 rpm -Column: diameter 93 mm -Spindle stroke: 100 mm / depth stop with fine adjustment Ibodpfjxm Rziex Afijc -Motor: VEM 0.8/1.0 kW with brake -Voltage: 380 V -Number: 2x drill available -Price: per piece -Dimensions: 550/480/H1270 mm -Weight:157 kg/piece

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 14023, travel distance X-axis: 1,140 mm, travel distance Y-axis: 910 mm, travel distance Z-axis: 875 mm, rapid traverse X-axis: 60 m/min, torque: 1,000 Nm, controller manufacturer: Siemens, controller model: 840 D, spindle speed (min.): 6,000 rpm, coolant supply: 60 bar, distance table center to spindle nose: 240 mm, Equipment: chip conveyor, documentation/manual, Siemens 840 D with network connection Renishaw OMP2 measuring probe SK50 DIN 69871 - pull stud DIN 69872 6000 rpm, 2 gear stages, max. torque 1000 Nm 80-position tool chain Ibodpfx Afsv Npm Hoisc 2 pallets 800x800 M16 hole pattern High-pressure coolant through spindle 50 bar Knoll paper belt filter and chip conveyor Year of manufacture Dec. 1999 (max. 1-shift operation)

Condition: ready for operation (used), Year of construction: 1965, Immediately available ex site: Hydraulic C-frame press WMW Zeulenroda Type PYE 160 S Year of manufacture: 1965 Completely overhauled in 2006 Ijdsxn Rx Dopfx Afiebc Press force: 160 t Table: 900 x 620 mm Distance table – ram: 800 mm Ram stroke: 500 mm Ram down (rapid traverse): 200 mm/s Ram up: 125 mm/s Drive: 17.5 kW Weight: 8.5 t Price: EUR 4,000—plus VAT, ex site

Condition: ready for operation (used), Year of construction: 1961, Manufacturer: WMW NILES lathe DLZ 630 Condition: used Turning diameter over bed: 630 mm Ibjdpfx Afedwfdfjisc Feed: quer: 0,018-1,25 mm/U Hollow: 70 mm Centre height: 290 mm Spindle speed: 22,5 – 1120 / 18 step U/min Turning length: 2000 mm Total power requirement: 15,0 kW Turning diameter over bed: 630 mm Weight of the machine ca.: 4,2 t Transport dimensions lxwxh: 4,5×1,35×1,5 m Turning diameter over slide: 340 mm If you need more information. We are here to help! Please contact us via the contact form or call us Your ad has been automatically translated. Translation errors are possible.

Condition: good (used), div. face plates from 400 mm - 800 mm Ibodpfxeipidhs Afijc

Condition: used, Technical details: table length: 400 mm table width: 225 mm Iedpfjwb D H Djx Afisbc width:: 400 depth: 225 mm height: 300 mm dimension L-W-H: 400 x 225 x 300 mm weight: ca. 34 / Winkel kg 2 pieces available (price per piece) with slotted holes Material made of cast steel Surface finished *

Condition: good (used), Bench drill, pillar drill, column drill, column drill -Manufacturer: WMW Heckert, bench drilling machine type BT 12/1 with base frame -Clamping table: 340 x 280 mm -Travel: 370 mm Ibodoir E Snopfx Afioc -Spindle holder: MK2 -Projection: 215 mm -Speeds: 224/450/900/1800 rpm -Column: diameter 92 mm -Spindle stroke: 100 mm / depth stop with fine adjustment -Motor: VEB 0.4/0.7 kW with brake -Voltage: 380 V -Dimensions: 620/480/H1710 mm -Total weight: approx. 182 kg

Condition: used, Parallel Lathe WMW NILES type DLZ 500 IV L 1000 Between points: 1000 mm Maxi Ø on bench: 500 mm Maxi Ø over saddle: 300 mm Spindle diameter: Ø 50 mm Spindle speed: from 28 to 1400 RPM 3-jaws chuck Ø 200 mm Threadings: Metric + Whitworth Tailstock CM4 Auto Feeds transverse + longitudinal + rapid Lubricant pump Voltage: 380 V Dimensions (L x W x H): 3000 x 1400 x 1500 mm Ijdjxnpf Nspfx Afiobc Weight: approx 2,5 T

Condition: good (used), Year of construction: 1987, number of straightening rollers: 13, working width: 2,000 mm, sheet thickness (max.): 10 mm, overall weight: 32,000 kg, straightening roller diameter: 145 mm, max. sheet width / max. sheet width: 2000 mm max. sheet thickness / max. sheet thickness( St 50): 10 mm min. sheethickness Blechdicke / min. sheet thickness: 3 mm Iodpfx Aoxnmd Asfiobc Anzahl der Richtwalzen / number of straightening rollers: 13 Walzen / rollers Richtwalzendurchmesser / diameter of straihgtening rollers: 145 mm Richtgeschwindigkeit / speed of straightening: 16 m / min Bale length / convexity length of rollers: 2330 mm Mittenabstand der Richtwalzen / distance b/n rollers centers: 150 mm Stützwaldermesser / diameter of bottom rollers: 290 mm Anzahl der Stützwalzen / number of bottom rollers 21/24 Anzahl der Abstützungen( oben/unten): 3 /3 Hubgeschwindigkeit der Traverse / speed of adjustm. of traverse: 0,71 mm / sec Hubweg der Traverse / way of traverse: -18 mm to +42 mm max. Schwenkung der unteren Traverse / max. swivel of lower traverse: 8 mm Hauptantriebsmotor / power of main motor: 30 kW Gewicht der Maschine / weight of the machine: 32 t

Condition: used, Technical details: length: 1020 mm width: 810 mm height: 625 mm weight of the machine approx.: 1070 kg Drill cube material made of cast steel. Ijdpfx Afjv Dduneisbc Surface with strong drill inclusions. T-slots according to DIN 650 - Vertical clamping surface: LxD: 1020 x 625mm - Horizontal clamping surface: LxW: 1020 x 810mm *

Condition: good (used), Year of construction: 1969, number of straightening rollers: 7, working width: 2,500 mm, sheet thickness (max.): 39 mm, max. sheet width: 2500 mm Convexity length of rollers: 2700 mm max. sheet thickness (St 50): 32 mm max. sheet thickness (St 34): 39 mm min. sheet thickness (St 50): 8 mm number of straightening rollers: 7 rollers number of driven straightening rollers: 5 rollers diameter of straightening rollers: 290 mm diameter of input/output straightening rollers: 345 mm number of support rollers: 13 Ibjdpfsxnll Eox Afioc diameter of support rollers: 288 mm stroke of upper beam: 120 mm Straightening speed: 16 m / min Rated power of main drive: 90 kW Total load: 138 kW

Condition: used, Technical details: Ijdpfx Aeu Nki Tefiobc Length: 1000 mm width: 630 mm height: 40 mm height over floor: 680 mm weight of the machine approx.: ca.250 kg space requirements of the machine approx.: L:1,0xB:0,63xH:0,68 m Measurement and Controlling Plate material made of special cast with steel supplement surface scraped & surface-gauged 3 single column made of cast iron with steel ball inserts and adjustment thread *

Condition: good (used), Year of construction: 1976, number of straightening rollers: 11, working width: 2,500 mm, sheet thickness (max.): 16 mm, overall weight: 46,000 kg, max. sheet width / max. sheet width: 2500 mm max. sheet thickness / max. sheet thickness (St 50): 16 mm min. sheet thickness Blechdicke / min. sheet thickness: 6 mm Anzahl der Richtwalzen /number of straightening rollers: 11 Walzen / rollers Richtwalzendurchmesser/diameter ofstraightening rollers: 180 mm Richtgeschwindigkeit / speed of straightening: 10 - 16 - 20 m / min Throughput speed: 10 m/min Hauptantriebsmotor / power of main motor: 75 kW Ijdpfxexnlkuo Afiobc Gewicht der Maschine / weight of the machine: 46 t

Condition: good (used), Year of construction: 1982, number of straightening rollers: 13, working width: 2,000 mm, sheet thickness (max.): 10 mm, overall weight: 32,000 kg, straightening roller diameter: 145 mm, Year of construction / YOM: 1982/2024 Sheet width: 2000 mm Sheet thickness - max.: 10 mm Sheet thickness - min.: 3 mm Number of straightening rollers: 13 rollers Straightening roller diameter: 145 mm Ibjdpfjxnliqox Afioc Straightening speed: 16 m/min Bundle length: 2330 mm Center distance between straightening rollers: 150 mm Support roller diameter: 290 mm Main drive motor: 30 kW Weight: 32 t Additional information: - Number of support rollers: 21/24 - Number of supports (top/bottom): 3 /3 - Traverse lift speed: 0.71 mm/sec - Traverse lift stroke: -18 mm to +42 mm - Max. tilting of lower traverse: 8 mm

Condition: good (used), Year of construction: 1994, throat depth: 360 mm, pressing force: 250 t, table width: 630 mm, table length: 1,250 mm, Pressure: 250 t Throat depth: 360 mm Table size: 1250 x 630 mm Table diameter: 250 mm Ram clamping surface: 850 x 450 mm Installation height: 800 mm Piston stroke: up to 500 mm Piston diameter: 400/360 mm Ibodpfxexnkg Us Afijc Ram speed downward: 200 mm/sec Ram speed upward: 110 mm/sec Total power requirement: 20.5 kW Machine weight approx.: 8 t