Eccentric press

Gustav Wolff KP 120

Condition: good (used), Year of construction: 1998, functionality: fully functional, total length: 19,000 mm, total width: 19,000 mm, table width: 610 mm, overall weight: 8,500 kg, table length: 850 mm, power: 12 kW (16.32 HP), pressing force: 120 t, installation height: 300 mm, to visit under power Fsdperwlxaofx Ab Tsgk

Year of construction: 1990, condition: used, pressure 75 t throat 300 mm stroke 8 - 110 mm table surface area 750 x 600 mm ram adjustment 75 mm ram surface 430 x 230 mm hole in the table 250 x 150 mm tool hole in ram 40 mm no. of strokes 60 + 90 Hub/min weight of the machine ca. 4,4 t total power requirement 4,5 - 6,8 kW dimensions of the machine ca. 1,95 x 1,1 x 2,35 m distance table/ram Hub unten, Stöß. unten 19 mm distance table/ram Hub oben, Stöß. oben 380 mm Furnishing: - with hydraulic clutch-brake combination, with new hydraulics and oil cooler - with gear transmission in oil bath - fixed table prepared for the attachment of tool changing consoles - 2 roller bars in the table - mechanical overload in the ram The following work is carried out on the machine / partial overhaul: - Machine is completely disassembled, checked, seals changed, defective parts exchanged etc - Machine is repainted - new Balluff cam control - new hydraulic unit with oil cooler for the clutch - new Vogel central lubrication Fsdpfxod Nl E Us Ab Tsgk - new control cabinet with touch panel and ABB safety control - Current UVV test with braking time measurement

Condition: used, machine/vehicle number: 51568, pressure:100 t stroke:0-500 mm table surface area:800 x 650 mm ram surface:800 x 600 mm hole in the table:355 mm table height over floor:800 mm dayligth:1130 mm weight of the machine ca.:5,7 t throat:310 mm space requirements approx. LxWxH:1,2 x 2,0 x 3,67 m Fodpfecxxrrox Ab Togk

Condition: like new (used), Year of construction: 2012, operating hours: 23,252 h, travel distance X-axis: 735 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 560 mm, controller manufacturer: 3D-Control Siemens 840D, workpiece diameter (max.): 840 mm, workpiece weight (max.): 600 kg, total height: 2,897 mm, total length: 3,567 mm, total width: 2,615 mm, table width: 650 mm, table length: 650 mm, overall weight: 12,100 kg, spindle speed (min.): 18,000 rpm, tool length: 315 mm, tool weight: 8,000 g, Year of construction: 2012 CNC controller: 3D-Control Siemens 840D Axes X-axis travel mm: 735 Y-axis travel mm: 650 Z-axis travel mm: 560 C-axis degrees: 360º (0,001) A-axis degrees: ±120(0.001) Feed rates m/min: 40 Rapid traverse m/min: 40 Acceleration in the axes m/s2: 6 Fgedjxrr I Iepfx Ab Tjk Milling/turning table nc: Number of pallets: 1 Table dimensions mm: Ø650 Maximum workpiece size (D x H) mm: Ø840x500 Max. workpiece weight kg: 600 Spindle Spindle speed rpm: 18000 Spindle drive power kW: 13/9 (40%ED/cont) Cooling Cooling through the Spindle Center bar: 40 Tank capacity: 600 Tool system Tool holder: SK 40 Tool magazine slots: 30 Tool changer: Double Gripper With free neighboring places mm: 160 Max. Tool Length mm: 315 Max tool weight kg: 8 Chip-to-chip time s: 4.9 Equipment Electronic Handwheel Chip conveyor Rigid table with integrated rotary table Infrared probe Internal cooling lubricant supply Rinsing gun Paper band filter Machine running times Under power: 23252 Spindle Working: 6497 Basic machine dimensions / weight Length mm: 3567 Width mm: 2615 Height mm: 2897 Weight kg: 12100

Condition: good (used), Year of construction: 1989, total height: 6,450 mm, For sale Beche short-stroke die hammer KGH 4B. Machine weight 65 t Working capacity 40 kJ max. impact frequency 98 min max. usable number of blows 41 min max. bear stroke 790 mm Machine is disassembled Fodpfxjrt Uc Ee Ab Tjgk Technical data on request

Condition: used, Miter cold circular saw KALTENBACH type KKS 400 NA Machine. No. 101701 Year of construction 1983 saw blade diameter 400 mm cutting range at 90° round Ø 130 mm sawing range at 90° square 120 x 120 mm sawing range at 90° rectangle 305 x 20 mm Cutting range at 45° round Ø 130 mm Sawing area at 45° square 110 x 110 mm Cutting range at 45° rectangle 245 x 30 mm Clamping range of collet feed 30 to 140 mm Working height 1000 mm miter cut 0 - 180 feed path 600 mm Saw blade speed 10 + 20 m/min. 2 steps motor power 1,7 and 2,6 kW hydraulic motor 1,5 kW Mains connection 380 Volt, 50 Hz - Hydraulic material clamp feed with infeed roller conveyor left 1500 mm - Feed path via double feed up to 1200 mm (2x feed, then sawing) - Hydraulic material clamping with vertical clamping cylinder - miter cut - saw angle with manual adjustment - hydraulic feed control, cutting speed manually adjustable - 2 motor speeds for the saw blade speed - saw blade stroke steplessly adjustable Fsdpfx Aod N H A Neb Tegk - coolant unit with electric pump in the machine base - Hydraulic unit fixed to the basic machine - Parts counter with zero cut-off space requirement of the saw 2600 x 1200 x 1900 mm weight of the saw approx. 1400 kg good condition

Condition: excellent (used), Year of construction: 2018, Control: HEIDENHAIN iTNC530 Power-on hours: 11,204 h Spindle hours: 2,182 h Technical details: Travel (X/Y/Z): 600 / 560 / 510 mm Spindle: Max. speed: 12,000 rpm Drive power - main spindle: 13 / 9 kW Max. torque: 82 / 54 Nm Fodpfxjwm I Ebe Ab Tsgk Distance spindle nose to table: 120 - 630 mm Worktable: Table clamping surface: 900 x 560 mm Max. table load: 600 kg T-slots: 5 Working height: 850 mm Tool magazine: Number of tool positions: 30 Tool holder: SK 40 Max. tool diameter: 80 mm Max. tool diameter with adjacent pockets empty: 130 mm Max. tool length: 300 mm Max. tool weight: 8.0 kg Tool-to-tool change time: 2.4 sec Chip-to-chip time: 6.7 sec Feeds: Rapid traverse: 30 m/min Feed force: 5 kN Max. feed rate: 30,000 mm/min Total power requirement: 32 kVA Machine weight: approx. 5.0 t Space requirement: approx. 4.0 x 5.0 x 3.0 m The machine can be demonstrated under working conditions. Low operating hours! Price includes loading.

Condition: new, Year of construction: 2025, BODOR laser cutting systems in top quality at top prices. Fgjdpfx Abefbg Hbs Tek -Simple programming- with service and training, assembly and commissioning. -Machines with 3Kw to 30 Kw power Easy to operate and suitable for beginners as well as established companies.

Condition: good (used), Year of construction: 2008, 1 used vertical machining center Manufacturer: Deckel Maho Model: DMU 80 monoblock Year of manufacture: 2008 Control: ITNC 530 Technical specifications X travel: 980 mm Y travel: 630 mm Z travel: 630 mm Control: iTNC 530 Total power requirement: 10 / 15 kW Machine weight approx.: 9.5 t Space requirements approx.: 4*4*2.5 m Additional information Equipment: Electronic handwheel Fsdpfxjxa Euds Ab Togk Operation mode 4 Manual swivel milling head Motor spindle 12,000 rpm SK 40 / Clamping DIN 69872 32-tool magazine Fixed table 1250 x 700 mm Chip conveyor Coolant system

Year of construction: 1980, condition: used, pressure 80 t throat - mm stroke 50 mm table surface area 875 x 695 mm ram surface 350 x 355 mm ram adjustment 71 mm no. of strokes 30 - 90 Hub/min distance between columns 450 mm weight of the machine ca. 6,2 t dimensions of the machine ca. 2,0 x 2,1 x 3,2 m daylight (stroke down, ram adjustment above) 480 mm Fsdsdlcy Hepfx Ab Tsgk Further information: - the machine is currently being a partially overhauled - the machine was re-equipped with the following components: * separate control cabinet with touchscreen including cabling * new painting of the individual components in the dismantled state After the partial overhaul, the machine is safe for manual insertion open tool, a current UVV test is carried out before delivery and braking time measurement.