Used Drilling Frame for sale (13,462)

Condition: excellent (used), Year of construction: 1998, Hofmann HT 200 U frame dowel and elongated hole drilling machine with adjustable angle. Special drilling machine for staircase construction, window construction and universal applications through pneumatic height adjustment. Angled dowel drilling and picket drilling can be easily performed using the rotating drilling unit. Motor with pole change, two speeds Motor power 1.5 / 1.8 kW, 1400 / 2800 rpm Motor start with a practical handle switch Precision chuck with two inserts, 16 mm and M10 thread Table size approx. 1100 x 240 mm Linear laser for precise positioning of the workpiece Drilling unit can be rotated 65 degrees to the left and right Pneumatic adjustment of the machining height, dowel drilling on two levels without retooling The desired drilling heights can be set for each drilling level using a handwheel and digital counter; switching then takes place pneumatically from the front Cross adjustment approx. 320 mm, stepless or in a 12 mm grid Drilling stroke approx. 200 mm 2 pneumatic workpiece clamps, can be positioned at the front and rear of the table Dedeyfta Tspfx Al Aewc 2 swiveling workpiece supports 2 side stops, can also be used as a front support Undercarriage Dust extraction connection 80 mm 4 used but good drills 9, 12, 16, 19 mm Few paint spots have been touched up, very good condition, see original photos. A used swiveling elongated hole drilling machine in this condition is rarely available. CE marking Operating manual Dimensions approx. 1200 x 1200 x 1200 mm (L x W x H), weight 310 kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration and are stored in our warehouse, see "other offers from this supplier".

Condition: like new (used), Year of construction: 2025, GANNOMAT "JUNIOR 323" FRAME DOWEL AND SLOT MORTISING MACHINE Complete in standard configuration as per price list 01/22/D with: - Precision collet chuck for ER 40 collets Ø 3–26 mm, including collets Ø 10 / 13 / 16 / 20 - Motor 1.5 kW, 2800 rpm - Positioning via digital counter - Pneumatic 2-level positioning adjustment (0–100 mm) - Max. drilling depth: 150 mm - Precision indexing rail with 12 mm pitch, featuring: - Center detent and lateral adjustment 320 mm - 2 pneumatic safety clamping cylinders - Complete fence system consisting of: • 1 center stop and 1 stop for oversized frames • 1 round stop bar approx. 850 mm long (can be mirrored from left to right) • 2 flip stops - Tiltable slot mortising device with 2 program cams (400V, 3Ph, 50Hz, 1.5kW) - Extraction hood Ø 80 mm, dust-tested - Central mitre stop 45° - Pair of auxiliary workpiece supports, pivotable (left and right) Dwjdpfx Alexdttij Aec - Drill head holder - 3-spindle drilling head, 32 mm pitch (can be rotated 90°) - Chassis with 4 wheels for easy machine movement Availability: Short-term – immediately –

Condition: used, Year of construction: 1993, Used machine Year of manufacture: 1993 Features and technical data: 2-jaw drill chuck up to 20 mm shank diameter Pneumatic positioning adjustment on 2 levels 0-100 mm Max. drilling depth: 150 mm Precision indexing rail 12 mm Center locking and cross adjustment 2 pneumatic safety clamping cylinders Motor 1.5 kW Speed: 2800 rpm Long hole drilling device, lowerable, with 2 program cams Machine weight approx. 310 kg Machine dimensions (W x D x H): 1100 x 1100 x 1500 mm (without stop) Dwodpfxjw I Uy To Al Asc Availability: short-term Location: Röllbach

Condition: used, Year of construction: 1990, functionality: fully functional, machine/vehicle number: 254002, type of input current: three-phase, overall weight: 130 kg, input voltage: 380 V, number of spindles: 8, input frequency: 50 Hz, Schleicher frame dowel hole drilling machine DBH 600, Drilling motor 1.5 kW, 380 Volt, 50 Hz, Drilling stroke 0 - 130 mm, Special drilling gear with 3 rows and 8 spindles, 1 clamping cylinder, Dwodpez Nkutefx Al Aec Special stop system for window frames and window mullions Weight approximately 130 kg as is, at the Seevetal location, excluding transport, EXW (Ex Works), subject to prior sale.

Condition: used, Year of construction: 2008, machine/vehicle number: 30655, overall weight: 5,500 kg, total length: 2,540 mm, total width: 2,290 mm, total height: 2,340 mm, FICEP P51 - CNC PUNCHING & DRILLING MACHINE FOR FLAT BAR AND PLATES | YEAR 2008 | 800 KN The Ficep P51 is a CNC-controlled punching and drilling machine for automated hole processing of flat bar and plates. Punching and drilling run in a single pass with automatic material feed - saving marking, re-clamping and handling on parts with many holes. CONDITION & HANDOVER Used machine from stock, year 2008, serial number 30655. - Condition and function are confirmed during the viewing or upon request. - Viewing possible by arrangement (no demonstration under power). - Service and reconditioning before handover by arrangement. FUNCTION & APPLICATION A hydraulic punching unit and an integrated drilling unit process the workpiece in one pass. A carriage with hydraulic, self-adjusting grippers and ball screw drive positions the material under CNC control (Ficep MINOSSE). Processes: punching, drilling, marking, countersinking and tapping. Typical applications: structural steelwork and connection technology as well as the fabrication of beams, brackets and frame structures with a high share of holes. TECHNICAL DATA - Manufacturer: Ficep | Model: P51 | Year: 2008 | Serial number: 30655 - Machine type: CNC punching and drilling machine - Punching force: 800 kN (approx. 80 t) | Punching units: 1 - Max. punching diameter: 46 mm | Material thickness (punching): 3-25 mm - Drilling units: 1 | Spindle power: 7.5 kW | Max. drilling diameter: 28 mm - Plate width: 100-500 mm | Plate length: from 100 mm, not limited by design thanks to roller conveyors - Workpiece weight: up to 100 kg (standard) / up to 250 kg (reduced positioning) - Travel: X 1,000 mm | Y 500 mm | Positioning speed: 20 m/min - Carriage drive: ball screw | Clamping: hydraulic grippers Dedpfoz Nyvyex Al Aewc - Control: Ficep MINOSSE CNC - Frame: one-piece steel C-frame with integrated hydraulic unit, electrics, pneumatics and CNC unit - Machine dimensions (L x W x H): approx. 2,540 x 2,290 x 2,340 mm | Machine weight: approx. 5,500 kg SCOPE OF DELIVERY - 1 x Ficep P51 main machine (one-piece steel C-frame) - 1 x punching unit (800 kN) - 1 x drilling unit (7.5 kW) - 1 x carriage with hydraulic grippers and ball screw drive - 1 x Ficep MINOSSE CNC control unit - 1 x hydraulic unit (integrated in the machine frame) - 1 x safety light curtain LOGISTICS & LOCATION Location: Ulft (Netherlands), close to the German border. Dismantling, transport, installation and commissioning can be carried out by ASM by arrangement - individually calculated upon request. ABOUT ASM Arendsen Steel Machinery (ASM) specializes in reconditioned Ficep structural-steel machinery - from sawing and drilling lines and profile drilling machines to plasma cutting systems. Further Ficep machines on request. CONTACT / INQUIRY Arrange a viewing | Price on request | Request a callback. Sale exclusively to commercial customers (B2B).

Condition: good (used), Code: 0318 Brand: BIESSE Model: F 39 E - CE Standard Electronic multiple boring machine with 39 spindles for furniture, carpentry, custom-made furnishings, panels, kitchens, bathroom furniture, doors,window frames, and various - CE Standard Suitable for horizontal and vertical drilling, any intermediate drilling between 0 and 90° can be performed thanks to a gear motor and handwheel. Electronic control Technical data: Dwodpfx Ajy Tt Rpsl Aoc N° 39 spindles Spindle rotation speed 4000 rpm Center distance between spindles 32 mm Max drilling center distance 1216 mm Drilling depth 65 mm Drilling head motor power 2,3 + 2,3 Hp Air operating pressure 6 bar Installed electrical power 4,1 Kw Overall dimensions mm 1800 x 1140 x 1600 h Weight kg 700 MACHINE SOLD UNDER THE CONDITIONS IN WHICH IT IS FOUND NOT RECONDITIONED

Condition: used, Year of construction: 2024, DOWEL HOLE DRILLING MACHINE GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW, complete in standard design with: - Fully automatic electronic control with pulse operation via foot valve for clamping-drilling-releasing, electric intermittent operation. - Automatic retraction of the drilling unit after reaching the set drilling depth. - Automatic extension of the drilling hole depth when drilling on the end face. This eliminates the need to adjust the drilling hole depth from flat-face to end-face drilling (+10 mm, e.g. for a dowel length of 35 mm, drilling depth on the flat face 14 mm and drilling depth on the end face 24 mm). - 1 drilling bar with 21 spindles, pitch 32 mm, motor 1.5 kW (drilling feed 0-70 mm), incl. 21 quick-change chucks (Ganner system) for easy changing of the drill bits. - Easy pivoting of the drilling unit from 0° to 90°, supported by gas cylinders. - 1 clamping support movable in the Y-axis with 3 pneumatic clamping cylinders, for workpiece height up to max. 80 mm. Ideal stop system consisting of: - 1 stop rail 1800 mm for drilling shelves (aluminum profile 40x40 mm) with 3 stop blocks, with quick-change system, easily interchangeable from right to left stop side for drilling shelves in carcass structures in mirrored fashion, also suitable for row drilling in the 32 system. - Side stops and position settings, as well as the position of the drilling height above the support table, are adjusted by means of mechanical digital counters. - Side stops can be easily pivoted away, for the shortest possible conversion from carcass to frame and row drilling. - Clamping arms for the clamping support designed for row drilling positions up to max. 300 mm. - Ideal three-stage tool system. - 1 set of drill bits for dowels: - 5 carbide dowel drill bits, Ø 8x77 mm, right-hand - 4 carbide dowel drill bits, Ø 8x77 mm, left-hand Basic machine DOWEL HOLE DRILLING MACHINE GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW, complete in standard design with: - Fully automatic electronic control with pulse operation via foot valve for clamping-drilling-releasing, electric intermittent operation. - Automatic retraction of the drilling unit after reaching the set drilling depth. - Automatic extension of the drilling hole depth when drilling on the end face. This eliminates the need to adjust the drilling hole depth from flat-face to end-face drilling (+10 mm, e.g. for a dowel length of 35 mm, drilling depth on the flat face 14 mm and drilling depth on the end face 24 mm). - 1 drilling bar with 21 spindles, pitch 32 mm, motor 1.5 kW (drilling feed 0-70 mm), incl. 21 quick-change chucks (Ganner system) for easy changing of the drill bits. - Easy pivoting of the drilling unit from 0° to 90°, supported by gas cylinders. - 1 clamping support movable in the Y-axis with 3 pneumatic clamping cylinders, for workpiece height up to max. 80 mm. - Ideal stop system consisting of: - 1 stop rail 1800 mm for drilling shelves (aluminum profile 40x40 mm) with 3 stop blocks, with quick-change system, easily interchangeable from right to left stop side for drilling shelves in carcass structures in mirrored fashion, also suitable for row drilling in the 32 system. - Side stops and position settings, as well as the position of the drilling height above the support table, are adjusted by means of mechanical digital counters. - Side stops can be easily pivoted away, for the shortest possible conversion from carcass to frame and row drilling. - Clamping arms for the clamping support des Dodpfjxnlflex Al Aowc

Year of construction: 2003, condition: used, frame hydraulic press WEGOMA Workspace: width 3600 mm height 2500 mm the amount of lateral hydraulic cylinders 3 pieces top two pieces beam mechanically Move Dedpfecmat Usx Al Aewc Mechanical compression setting more photos an questions

Condition: used, machine/vehicle number: 008781, Position 1: Automated Warehouse IMA-CUTTING,EDIGING,DRILLING LINE Position 2: Beam panel saws with automatic warehouse IMA-CUTTING,EDIGING,DRILLING LINE Position 3: CNC machine centres with automatic warehouse IMA-CUTTING,EDIGING,DRILLING LINE Position 4: edge bander batch 1 IMA-CUTTING,EDIGING,DRILLING LINE Position 5: CNC for Flexible Drilling IMA-CUTTING,EDIGING,DRILLING LINE Dedpfsz Nx Hkox Al Aswc Position 6: Robot IMA-CUTTING,EDIGING,DRILLING LINE

Condition: excellent (used), Year of construction: 2008, operating hours: 2,000 h, functionality: fully functional, machine/vehicle number: 30762, spindle speed (max.): 3,000 rpm, type of input current: three-phase, total length: 10,000 mm, total height: 2,000 mm, total width: 5,000 mm, table length: 3,100 mm, drilling capacity: 40 mm, drilling depth: 130 mm, workpiece weight (max.): 7,500 kg, Manufacturer: Ficep Year of manufacture: 2008 Serial number: 30762 Technical specifications: Maximum workpiece width: 3,100 mm Minimum workpiece width: 400 mm Minimum workpiece length: 1,900 mm Maximum workpiece length: 6.4 m Maximum material thickness: 130 mm Maximum drilling diameter: Ø40 mm Dwjdpez Inhgefx Al Ajc Maximum workpiece weight: 7,500 kg Plasma source: Hypertherm HPR260 Spindle speed: 180–3,000 RPM Minimum workpiece size: 200 × 150 mm Equipment: Complete line with motorized roller conveyors for feeding and removing material Approximate feeding conveyor length: 8 m Approximate removal conveyor length: 5 m Includes a wide conveyor for removing metal scrap.

Condition: good (used), Year of construction: 2005, machine/vehicle number: PRJ035402, functionality: fully functional, spindle mount: MK 4, total width: 450 mm, total length: 720 mm, total height: 1,861 mm, table width: 370 mm, table length: 500 mm, overall weight: 510 kg, We offer this well-maintained ALZMETALL AB 40/SV pillar drilling machine, manufactured in 2005. Manufacturer: ALZMETALL Model: AB 40/SV Year of manufacture: 2005 Condition: good Serial number: PRJ035402 Drilling capacity in steel St60: D40 mm Drive: Continuously variable with a 2-speed gearbox Spindle speed: 70-4000 rpm Tool holder, short spindle: MK4 Overhang: 300 mm Dedpfx Aloz Nd Sls Aswc Column diameter: 145 mm Spindle stroke: 160 mm Feeds: 0.1/0.2/0.3/0.4 mm/rev Table clamping surface: 500 x 370 mm Max. table load: 160 kg Distance spindle-table min/max: 147/688 mm Distance spindle-base plate (top edge): 1162 mm Distance spindle-base plate (bottom edge): 1267 mm Base plate (unmachined): 720 x 450 mm Machine height: 1861 mm Weight approx.: 510 kg Space requirement approx. (L x W): 720 x 450 mm Technical data without guarantee. Errors and prior sale reserved.

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, input voltage: 400 V, total length: 14,000 mm, Equipment: documentation/manual, Alzmetall AB 26 drilling line with MKH CNC positioning and roller conveyors (2006) For sale: complete drilling line for profiles and strips, built around an Alzmetall AB 26 column drilling machine with an MKH CNC positioning system. The machine has been used in our production and is being sold due to workshop restructuring. Specifications: • Column drilling machine: Alzmetall AB 26, manufactured in 2006 • Digital display of spindle speed and drilling depth • Automatic spindle feed with depth adjustment • Coolant lubrication system • MKH CNC control with positioning carriage and gripper on guide rail • Pneumatic work piece clamping • Infeed and outfeed roller conveyors, total length approx. 14 m • Separate control cabinet with emergency stop and main switch • Connection values: 400V / compressed air 6-10 bar Condition: operational, can be demonstrated while running. Manual available. Dsdoz I Tahjpfx Al Aswc Location: Waalwijk, Netherlands Availability: immediate / by arrangement Dismantling and loading: [by arrangement / buyer arranges transport / we assist with loading] Price: € 9,000 excl. VAT Inspection by appointment is possible.

Condition: used, Year of construction: 2011, working width: 1,300 mm, workpiece height (max.): 50 mm, working length: 3,000 mm, TECHNICAL DETAILS Working area, X-axis: 3,000 mm Working area, Y-axis: 1,300 mm Maximum workpiece thickness: 50 mm Number of working areas: 2 Number of controlled axes: 3 Drilling units Number of drilling units: 4 Drilling unit 1: Top Vertical drilling spindles: 51 Horizontal drilling spindles in X-direction: 4 Drilling unit 2: Top Vertical drilling spindles: 51 Horizontal drilling spindles in X-direction: 4 Drilling unit 3: Bottom Horizontal drilling spindles in Y-direction: 42 Drilling unit 4: Bottom Horizontal drilling spindles in Y-direction: 42 Milling units Number of milling units: 2 Milling unit 1: Top Controlled axes: 3 Motor power: 6.6 kW Dedoz Ekggspfx Al Aowc Milling unit 2: Top Controlled axes: 3 Motor power: 6.6 kW Sawing units Number of sawing units: 2 Sawing unit 1: Top Design: Fixed unit for grooving in X-direction Maximum tool diameter: 125 mm Sawing unit 2: Top Design: Fixed unit for grooving in X-direction Maximum tool diameter: 125 mm EQUIPMENT Albatros machine programming software Collets for workpiece clamping The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 5446

Condition: used, Year of construction: 2007, Manufacturer IXION GmbH & Co. KG, Germany Model / Type TLF 1004 Machine type CNC deep drilling and milling machine Year 2007 Machine number 950-483 Axis Travels and Rotary Table X-axis travel 2,000 mm Y-axis travel 800 mm Z-axis travel 2,000 mm B-axis rotary table 360 degrees Dwsdpfxez Nyz Ns Al Aoc

Condition: ready for operation (used), Year of construction: 1985, Available for immediate pickup at our location: Radial drilling machine TOA Type TRD 1000 F Year of manufacture 1985 Outreach 1000 mm Installation height 800 mm Dwodpfx Aloz I Nkvs Asc Taper shank MK 4 Spindle speeds 50 – 1230 rpm Drive power 4 kW Rotary table Vise Weight 2 tons Price: EUR 1,750.00 plus VAT, ex works

Condition: excellent (used), Year of construction: 1987, functionality: fully functional, Drilling capacity in steel (diameter): 2-20 mm Overhang: 210 mm Dedpfxoz H T Dko Al Ajwc Drilling stroke: 100 mm Distance spindle/table max.: 450 mm Speed range: 355 – 710 – 1400 - 2800 rpm Spindle taper: MK2 Table clamping surface: 340x280 mm Total power requirement: 1.1 kW Machine weight approx.: 165 kg

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, Alzmetall pillar drilling machine AB 35 S MK 4 Spindle speeds: 130 - 3500, stepless with 2 gear stages Right and left rotation 3-step feed Original paint Dsdpfx Aljz I N Tqj Aswc Table: 620 x 470, no pre-drilled holes Overhang: 300 Column: 150 Drilling stroke: 180 Coolant system, quick-action drill chuck, emergency stop, tachometer – all in working order. Dimensions: H 1.97m, D 0.95m, W 0.62m Weight: approx. 600 kg Condition: original, runs smoothly and quietly, excellent runout. Free loading at D-88433 Schemmerhofen.

Condition: good (used), functionality: fully functional, Gillardon GB30 pillar drilling machine Speed range: 60-1600 rpm Spindle taper: MK3 Overhang: approx. 320 mm Drive power: 1.1/1.6 kW Column diameter: approx. Ø 130 mm Drill spindle stroke: approx. 175 mm Dwodpfx Alez Ngr Io Asc Table clamping surface: approx. Ø 500 mm with 14mm T-slots Table swivel range: approx. + / – 90 degrees Dimensions: 1000x500x1970mm Weight approx. 400 kg

Condition: used, Drilling / Milling machine OPTIMUM type OPTI F 40 E Travel X: 500 mm Travel Y: 200 mm Spindle: Ø 80 mm Cone CM3 Spindle exit: 120 mm Spindle speed: from 95 to 3200 RPM Table size: Length 730 mm x Width 210 mm Dsdpfx Aljz Nxw Ae Aewc 2 speeds motor Motor power: 1,5 Kw Straight head Cross table Manual Descent Equipped with: 1 rotary vice Voltage: 380 V Dimensions (L x W x H): 1200 x 900 x 1400 mm Weight: approx 350 KG

Condition: ready for operation (used), functionality: fully functional, ARBOGA UM 3008 / Drilling and Milling Machine -Spindle speeds / 8 stages / 105 - 3020 rpm -Gear / Gear head / Swiveling and tilting -Tool holder MK 3 -Drilling capacity / Steel max. 30mm -Drilling depth / Quill stroke approx. 130mm -Max. distance - Spindle / Table approx. 600mm -Cross table 585x245mm, adjustable via crank Dimensions: L x W x H 0.9 x 0.8 x 1.9 meters / Weight approx. 600 kg Dodpfxsz Hy Hrj Al Aewc Errors and omissions excepted.

Condition: used, Year of construction: 1998, Number of spindles in the hole row: 11 Number of horizontal spindles: 3 Dodpfx Aez I Ivdol Ajwc Pot-band drilling head: yes, Hettich Drill spacing: 32mm Power consumption: 2.2kW Drilling unit: swiveling

Condition: used, Radial Drilling Machine GSP type 49S22 Spindle: Ø 125 mm Cone: CM6 Spindle exit: 600 mm Spindle speed: from 17 to 1050 RPM Arm travel: 1800 mm Maxi height column travel: 1800 mm Dsdpjz Nxnhefx Al Aewc Column diameter: Ø 600 mm Total column height: 3000 mm Spindle speed: 11 kW Drilling/tapping function Mechanical locking of the column Hydraulic locking of the trolley Auto descent Delivered with one cube Cube dimensions: L 800 x W 560 x H 600 mm Table size: L 3300 x W 1400 x H 320 mm Voltage: 380 V Weight: 12 T

Year of construction: 1991, condition: excellent (used), functionality: fully functional, Möhringen high-performance band saw from a small sawmill. Frame width 750 x 710 mm. Stroke 500 mm. Speed 300 rpm. Hydraulic feed, continuously adjustable from 0 to 12 m/min. Hydraulic raising of the saw wheels with adjustable wheel pressure. Automatic adjustment of the saw frame overhang. Automatic electric central lubrication system. Full and idle pulleys. Reinforced steel flywheel. Dodpsz N Dd Uofx Al Ajwc Electromagnetic remote control. Saw mounting with sliding guides, saw gauges. Hydraulic saw tensioner. Electrical control cabinet and accessories. Professionally disassembled and loaded onto a truck for transport.

Condition: good (used), Year of construction: 1986, machine/vehicle number: 5122, Offer 26250 Dodpfez I Sd Sex Al Aswc Technical data: Drilling capacity in steel ST 60: 32 mm Drilling capacity in steel ST 60: 40 mm Long spindle, MK 3 Drilling spindle speeds, continuously variable: 160 - 2250 rpm Drilling spindle stroke: 120 mm Overhang: 293 mm Column diameter: 115 mm Machined base plate with T-slots: 400 x 400 mm Max. distance from base plate to spindle: 600 mm Emergency stop button Space requirement: approx. W 450 x H 1250 x D 900 mm Weight: approx. 250 kg Quick-change drill chuck Table stand

Condition: good (used), functionality: fully functional, spindle mount: MK 4, Drilling capacity: 40 mm, speeds: 60 - 1600 rpm, threading device, feeds. Dwjdpfx Alsz N Ex He Aoc