Used upright drilling machines for sale (60)

Condition: used, Column Drilling Machine CINCINNATI PTC 20 Spindle CM3 Njdpozg Hynefx Alnscu Spindle exit: 150 mm Spindle speed: from 100 to 3800 RPM Rotating table Table size: 430 x 430 mm Throat depth: 280 mm Spindle motor: 1,5 kW Drilling/taping function Voltage: 380 V Width: 600 mm Depth: 1100 mm Total height: 1900 mm Weight: approx 400 KG

Condition: good (used), Column Drilling Machine ALZMETALL AB3 ESV Spindle: CM3 Rotation: 1 range 220 -800 RPM + 1 range 800-2900 RPM Table size: Length 615 mm x Width 470 mm Spindle travel: 160 mm Throat depth: 280 mm Speed adjustment by belt drive Rotative table at 360° Automatic Descent 3 speeds: 0,006 - 0,12 - 0,18 mm/min. Lubricant pump Voltage: 380 V Width: 800 mm Depth: 1300 mm Nsdpfezg Hyhsx Alnscu Total height: 1900 mm Weight: approx 800 kg

Condition: used, Year of construction: 1982, Column Drilling Machine GSP type 205 R Ncsdpfxjzg Hybo Alnsu Spindle: Ø 100 mm Cone CM4 Spindle exit: Ø 300 mm Rotation: from 12 to 1800 RPM Table size: 800 x 400 mm Year of construction: 1982 Maxi distance spindle nose/tablein low position: 700 mm Mini distance spindle nose/table: 250 mm Throat depth: 400 mm Cross-table 1150 x 400 mm Drilling/tapping function Automatic spindle advance The manual descent of the spindle is hard (works perfectly in automatic advance) Manual raising/lowering of the table Voltage: 380 V Width: 1300 mm Depth: 1700 mm Total height: 2700 mm Weight: approx 1,5 T

Condition: used, Year of construction: 1997, Workbench Column Drilling Machine CINCINNATI PE 32 Nsdpszg Hx Rsfx Alnecu Year of construction: 1997 Spindle: CM3 Spindle exit: 150 mm Spindle speed: from 100 to 3800 RPM Table travel X: 290 mm / Travel Y: 150 mm Speed variator by belt variator Maxi height base/spindle nose: 500 mm Mini height base/spindle nose: 260 mm Throat depth: 300 mm Spindle sleeve diameter: Ø 80 mm Equipped with one cross table dimensions: L 430 x W 240 mm Voltage: 380 V Width: 900 mm Depth: 1100 mm Total height on base: 2000 mm Weight: approx 400 kg

Condition: used, Workbench Column Drilling Machine FLOTT type 16 STG/R2 Ncsdpfx Aozg Hx Delnou Spindle: CM2 Spindle exit: 100 mm Spindle speed: from 80 to 2000 RPM Table size: Length 340 mm x Width 280 mm Maxi distance spindle nose/table (lower table): 400 mm Throat depth: 240 mm 2 speed motor 2,2 kW Drilling/tapping function Adjustment by belt variator Electronic RPM speed not working Voltage: 380 V Width: 500 mm Depth800 mm Total height: 1100 mm Weight: approx 150 kg

Condition: excellent (used), bore capacity in steel (diameter) 35 / 45 mm Nodpfx Aezd Hgpolnjcu throat 330 mm bore stroke 200 mm morse taper MK 4 table diameter 600 mm spindle turning speed - stepless 80 - 1800 U/min table adjustment - upper 450 mm spindle stroke 400 mm total power requirement 2,5 kW weight of the machine ca. 1,4 t dimensions of the machine ca. 2,5 x 1,2 x 0,8 m automatic feed.

Condition: new, spindle mount: MK 4, total width: 1,020 mm, total length: 610 mm, total height: 2,450 mm, table width: 600 mm, table length: 600 mm, overall weight: 820 kg, clearance between the columns: 375 mm, mount diameter: 50 mm, quill stroke: 230 mm, Column Drill Maximum drilling capacity Ø 50 mm Spindle holder MK 4 Spindle speed min. 54 rpm Spindle speed max. 2.090 rpm Stroke of the drill pinole 230 mm Distance column to drilling center line 375 mm Drilling table size 600 x 600 mm Length 610 mm Njdpfxjzdq Tmj Alnecu Depth 1020 mm Height 2450 mm Weight 820 kg If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: new, spindle mount: MK 4, total width: 930 mm, total length: 560 mm, total height: 2,220 mm, table width: 560 mm, table length: 560 mm, overall weight: 465 kg, clearance between the columns: 350 mm, mount diameter: 40 mm, quill stroke: 180 mm, spindle speed (max.): 1,450 rpm, spindle speed (min.): 50 rpm, Column Drill Maximum drilling capacity Ø 40 mm Spindle holder MK 4 Spindle speed min. 50 rpm Spindle speed max. 1.450 rpm Stroke of the drill pinole 180 mm Distance column to drilling center line 350 mm Drilling table size 560 x 560 mm Length 560 mm Depth 930 mm Height 2220 mm Weight 465 kg Ncodpfezdq S Nex Alnju If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: new, spindle mount: MK 4, total width: 930 mm, total length: 560 mm, total height: 2,220 mm, table width: 560 mm, table length: 560 mm, overall weight: 465 kg, drilling capacity: 40 mm, quill stroke: 180 mm, Equipment: type plate available, Maximum drilling capacity Ø 40 mm Spindle holder MK-4 Spindle speed min. 50 rpm Spindle speed max. 1.450 rpm Stroke of the drill pinole 180 mm Distance column to drilling center line 350 mm Drilling table size 560 x 560 mm Length 560 mm Depth 930 mm Ncedpfxozdq Sve Alnsu Height 2220 mm Weight 465 kg If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, bore capacity in steel (diameter) 60 mm throat 400 mm total power requirement 4,4 kW weight of the machine ca. 1,7 t Nodswftt Iepfx Alnjcu

Condition: used, Year of construction: 1986, bore capacity in steel (diameter) 32 mm throat 290 mm bore stroke 180 mm total power requirement 1,9 kW Nedpfew En D Ijx Alnocu Description to follow!

Condition: used, functionality: fully functional, power: 3.68 kW (5.00 HP), input voltage: 380 V, type of input current: three-phase, Microcut Vertical Turret Milling Machine – 5HP Microcut vertical turret milling machine manufactured by Buffalo Machinery Co. Ltd, Taiwan. Heavy duty industrial machine fitted with power feeds, coolant system and machine vice. Model: 5VK type with 5HP motor and 380V 3 phase supply. Suitable for precision engineering, fabrication, maintenance workshops, toolrooms and general machining work. Features include: Vertical turret milling head Large T-slot table Power feed controls 5HP motor 380V 3 phase Machine vice included Coolant tray and lubrication system Variable speed head Heavy cast iron industrial construction Machine is in good used workshop condition with normal cosmetic wear from industrial use. It is complete and operational. Ideal for engineering shops, maintenance departments and production work. Ncjdpfsy R Ebnsx Alneu Loading available on site. Transport can be arranged. Viewing welcome. Open to sensible offers.

Condition: ready for operation (used), functionality: fully functional, input voltage: 380 V, type of input current: three-phase, spindle mount: MK 4, drilling depth: 150 mm, height adjustment type: mechanical, actuation type: electric, rotational speed (max.): 2,400 rpm, rotational speed (min.): 100 rpm, total width: 660 mm, total length: 750 mm, total height: 2,050 mm, table width: 660 mm, table length: 560 mm, 3-phase 380V, 2-speed motor is running smoothly! Geared head with 8 spindle speeds. Gears operate in oil. Spindle RPM adjustable from 100 to 2300. Power feed with 4 feed rates. MT4 spindle mount. Albrecht 1-13mm MT3 drill chuck included. MT3 to MT4 adapter sleeve included. Tool ejector. Ncodpjzfqz Tefx Alnou Emergency stop switch. Runs in both left and right directions. Table dimensions: 660x560mm Maximum drilling depth: 150mm Drilling depth is adjustable. Head and table are height-adjustable. Good overall condition! Made in Sweden. Overall dimensions: 75x66x205cm Contact us for shipping options! €2,500.00

Condition: new, Year of construction: 2026, CORMAK ZS-40B Industrial Pillar Drill The CORMAK ZS-40B is a technologically advanced industrial pillar drilling machine designed for intensive metalworking applications in workshops and production facilities. Equipped with a precision oil-bath gearbox, automatic vertical feed, and tapping functionality, the CORMAK ZS-40B metal drill press delivers reliability, efficiency, and outstanding drilling and threading performance. Key Advantages Automatic vertical feed – three feed rates (0.12, 0.18, and 0.25 mm/rev) allow optimal adjustment of cutting parameters to suit different materials. Tapping function with automatic spindle reversal – enables efficient internal thread cutting up to M32 without operator intervention. Oil-bath gearbox with hardened and ground gears – ensures smooth, quiet operation and long service life of the drive system. Rigid 115 mm diameter column – minimizes deflection and vibration, resulting in higher machining accuracy. Large rotating worktable with height adjustment – allows machining of large and irregularly shaped workpieces. Integrated cooling system as standard – improves drilling quality, extends tool life, and reduces the risk of overheating. Construction and Technology The CORMAK ZS-40B industrial drill press is engineered for continuous operation in demanding production environments. At its core is a mechanically driven gearbox lubricated in an oil bath, providing stable and reliable power transmission. The MT4 spindle taper accommodates a wide range of drilling and tapping tools, while the high rigidity of the spindle head and column assembly ensures precise hole machining. A transparent plexiglass chuck guard enhances operator safety while maintaining full visibility of the machining area. Precision and Productivity The automatic feed system enables repetitive drilling operations without operator fatigue, significantly improving productivity in serial production. The spindle speed range from 95 to 1600 rpm, combined with six gearbox speeds, allows precise adjustment of machining parameters to match the material and tooling requirements. A precision handwheel with depth scale provides accurate control over drilling depth. Applications The CORMAK ZS-40B drill press with tapping function is an ideal solution for: Manufacturing and assembly plants Mechanical and metalworking workshops Maintenance departments Tool rooms and training centers Standard Equipment 16 mm drill chuck MT4 arbor Ncjdjridv Sjpfx Alneu MT3 and MT2 reducing sleeves Drift key for arbor removal Worktable with mounting T-slots Handwheel with depth scale for drilling depth control Cooling system with pump Plexiglass spindle guard Handwheel with graduated scale Technical Specifications Parameter Value Maximum drilling capacity 40 mm Maximum tapping capacity M32 Spindle taper MT4 Column diameter 115 mm Distance from spindle axis to column 260 mm Maximum spindle-to-table distance 754 mm Maximum spindle-to-base distance 1270 mm Spindle speed range 95–1600 rpm Number of speeds 6 Automatic feed rates 0.12 / 0.18 / 0.25 mm/rev Worktable dimensions 354 × 575 mm Overall height 2120 mm Motor power 1.1 kW (S1) / 1.6 kW (S6) Power supply 400 V / 50 Hz Weight 410 kg

Condition: used, functionality: fully functional, The ALZMETALL AX 2/S is the more compact sister machine to the ALZSTAR series. It is a professional, extremely precise bench or pillar drill (depending on the base), primarily used in precision engineering, training workshops, laboratories, and demanding workshops. While the ALZSTAR 30/S is designed for "rough" work with a drilling diameter of up to 30 mm, the AX 2/S focuses on compactness and maneuverability for smaller drilling diameters, without compromising the typical Alzmetall stability. Technical data at a glance Feature | Value / Specification ----- | ----- Drilling capacity (in steel St 60) | 23 mm Thread cutting (optional) | max. M 14 (steel) / M 16 (cast iron) Spindle mount | MK 2 (short spindle) Spindle stroke (Z-axis) | 100 mm Overhang | 250 mm Column diameter | 90 mm Machine table (support) | 370 x 300 mm Feed | Manual Motor power | 0.6 / 0.95 kW Spindle speed (stepless) | Variant 1: 125 – 2,400 rpm | Variant 2: 225 – 4,300 rpm Machine weight | approx. 180 kg (net machine weight) Nedpfjzdy Rzsx Alnecu Key features & equipment details Mechanically stepless drive: As with the larger sister model, the speed is adjusted steplessly and conveniently during operation via a mechanical control wheel (variator). Digital display: The spindle speed is displayed digitally on a clearly visible display on the head of the machine as standard. Compact size: With a net weight of approximately 180 kg, it is significantly lighter than the ALZSTAR 30/S (approx. 260 kg) and can still be transported or moved relatively easily if required. Safety features: A lockable main switch with motor protection, a locking emergency stop button, and the electrically protected spindle guard are also standard features. Note: Sold without warranty or guarantee. We assume no liability for the operational functionality of the machine. The sale is made excluding any liability for material defects, to the extent permitted by law.

Condition: new, Year of construction: 2026, CORMAK ZS-40HS Pillar Drill The CORMAK ZS-40HS is an advanced pillar drilling machine for metalworking, designed for intensive industrial use. Featuring a hardened gear transmission system, large drilling capacity, and tapping capability up to M32, this model is a reliable solution for manufacturing plants, metalworking shops, and maintenance departments. Key Advantages Large drilling capacity – up to 40 mm – suitable for machining a wide range of materials and thicknesses. Tapping function with automatic spindle reversal – enables fast and efficient thread cutting up to M32. Precision oil-bath gearbox – 6 spindle speeds provide optimal speed adjustment (95–1600 rpm) for various machining operations. Rotating head with height adjustment – increases flexibility and allows drilling at different angles. Rigid 115 mm diameter column – ensures excellent stability even under maximum load. Large worktable with height adjustment and vise mounting capability – facilitates machining of large workpieces. Construction and Technology The CORMAK ZS-40HS industrial drill press is built with heavy-duty cast iron components and a reinforced 115 mm diameter column, ensuring maximum rigidity and vibration reduction. The transmission system is based on hardened, precision-ground gears, providing exceptional durability and reliable power transmission. The 120 mm spindle travel and MT4 spindle taper allow the use of a wide range of drill bits and tapping tools. Precision and Performance The CORMAK ZS-40HS metalworking pillar drill offers high drilling accuracy and repeatability thanks to its mechanical gearbox and precision handwheel with depth scale. Flexible adjustment of both the drilling head and worktable height allows the machine setup to be tailored to specific machining requirements. The powerful motor (1.1 kW continuous duty S1, 1.6 kW intermittent duty S6) ensures efficient operation even when drilling large diameters. Applications The CORMAK ZS-40HS column drilling machine is designed for industrial applications, particularly in: Manufacturing and processing plants Metalworking workshops Maintenance departments Tool rooms Technical schools and training centers Standard Equipment 16 mm drill chuck MT4 arbor MT3 and MT2 reducing sleeves Drift key for arbor removal Worktable with mounting T-slots Handwheel with depth scale for drilling depth control Technical Specifications Parameter Value Maximum drilling capacity 40 mm Maximum tapping capacity M32 Spindle taper MT4 Spindle travel 120 mm Column diameter 115 mm Spindle speed range 95–1600 rpm Number of speeds 6 Worktable dimensions 575 × 354 mm Base dimensions 385 × 330 mm Motor power S1: 1.1 kW / S6: 1.6 kW Power supply 400 V / 50 Hz Nedpfxsriduxs Alnscu Overall height 2100 mm Weight 350 kg

Condition: good (used), PK Dacice drilling machine Ncedpfx Alemw Uffsneu Type: VS20A Bed: 355 x 280 mm Speed max: 2800 RPM Spindle: 40 mm Coolant pump Machine height: 197 cm

Year of construction: 1992, condition: excellent (used), machine/vehicle number: 238828, Available: Immediately Nedpfx Aepr Uvrjlnocu

Condition: good (used), functionality: fully functional, type of input current: three-phase, spindle mount: MK 1, rotational speed (max.): 1,800 rpm, throat depth: 200 mm, table width: 320 mm, table length: 250 mm, mount diameter: 80 mm, stroke length: 70 mm, Equipment: lighting, type plate available, Drilling machine, drilling machine, stand drilling machine, column drilling machine Ncsdpfxowzaqxs Alneu -Manufacturer: Webo, G6 column drilling machine -Motor: 0.75kW 380v 50 Hz morse MK-1 chuck max drill size: M6 -Gearbox: with flat belt coolant pump automatic-manual operation spindle speed per minute -Table size: 320 x 250 mm -Spindle stroke: 70 mm -Reach: 200 mm -Column Ø: 80 mm -Dimensions: 450/600/H1800 mm -Weight: ca 190 kg

Condition: ready for operation (used), A used, but well-maintained SB 25 pillar drill is for sale, as shown in the pictures. Ncodpfxjit Rfbj Alnou

Condition: used, Technical details: bore capacity in steel (diameter): 40 mm throat: 360 mm bore stroke: 280 mm Ncedpfxswid Uwj Alnou spindle taper MT: MK 5 spindle speed:: 32 - 1400 U/min feed: 0,11-1,73 mm/U connected load: 6 kW Distance spindle/table max.: 750 mm table clamping surface:: 780+650 mm drill table adjustment: verical 800 mm column diameter: Größe: 230 x 950 mm dimension machine xH: 1,1 x 0,8 x 2,8 m weight of the machine ca.: 1,5 kg for thread cutting clockwise and counter clockwise operation *

Condition: used, functionality: fully functional, spindle mount: MK 2, quill stroke: 120 mm, Column drilling machine Gillardon, drilling machine in good used condition Manufacturer: Maschinenfabrik Wilhelm Gillardon II, Bretten i. Baden According to the information on the attached plate, the drilling machine is powered by a motor from VEM Elektromotorenwerke Thurm. Electric motor Three-phase asynchronous motor, type KPER 80 K 4 VEM Motors Thurm GmbH D, Zwickau 3 speed ranges via belt drive. Pinole stroke approx. 120 mm, drilling spindle with Morse taper 2, weight approx. 150 kg / approx. 1380 RPM MK2 drilling column Power consumption 0.75 kW - mains connection 380 volts, 50 Hz. An inspection while the machine is running is possible after prior appointment. Price negotiable Our asking price is €390,-- net ex works, plus packaging costs. Nsdpfeh N Svlex Alnocu All technical data is subject to printing errors and inaccuracies. Sale exclusively to countries within the EU.

Condition: good (used), functionality: fully functional, spindle mount: MK 3, rotational speed (max.): 1,450 rpm, rotational speed (min.): 55 rpm, table width: 600 mm, table length: 470 mm, For sale is an Alzmetall column drill press in good used condition, as shown in the photos. Technical specifications: • Manufacturer: Alzmetall • Model: AB3-ESV • Speed: approx. 55–1,450 rpm Njdpjy Uxhiofx Alnscu • Spindle stroke: approx. 180 mm • Feed rates: 0.1/0.2/0.3 mm/rev • Table dimensions: approx. 600x470 mm • T-slot width: approx. 14 mm • Year of manufacture: 1977 • Condition: Used, in working order Shipping costs via freight forwarder: approx. €190 International buyers are welcome! You will receive an invoice with VAT shown. Viewing/pickup is possible by appointment in 42855 Remscheid. Sale from location 42855 Remscheid, loaded ex works. Subject to errors in technical data and prior sale.

Condition: used, Year of construction: 1970, taper MK 4 feeds: ja Ncjdpfx Aexzu Dqjlnju weight of the machine ca. 1,5 t

Condition: good (used), machine/vehicle number: M4137-1280, functionality: fully functional, rotational speed (max.): 960 rpm, For sale is a Snow TA-3-S tapping machine. The item is in good condition. Two units available. Technical data: Manufacturer: Snow Manufacturing Model: TA-3-S Serial number: M4137-1280 Motor power: 0.55 kW Speed: 960 rpm Voltage: 380 Volt Frequency/phase: 50 Hz / 3 phase Control voltage: 110 Volt Transport and loading can be organized Europe-wide for an additional fee, upon request. Prices are subject to VAT. Viewing by appointment possible. Please contact us—our team will be happy to assist you. Trade-in or exchange possible! Nsdpfoy Hihkox Alnocu Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Gjbn N Ay Dowza Dxogoil Do you need a high-quality yet affordable metalworking machine for your production? Or are you looking to sell yours? For further info or contact options, please visit our website.