Pillar drilling machines 20-29mm bore capacity for sale
Your location was not identified (Edit)
bore capacity in steel (diameter) 25 mm
Bhf0aofbte
throat -- mm
bore stroke 120 mm
tool taper MK 3
no. of turning speeds 8
speeds 65 - 3.060 U/min
feed manuell / manual
table surface area 300 x 270 mm
Column-Diameter 100 mm
distance spindle center to column 250 mm
Motor output 0,82 / 1,2 kW
dimensions of the machine ca. 2,14 x 0,6 x 0,8 m
weight of the machine ca. 0,25 t
bore capacity in steel (diameter) 25,0 mm
bore spindles - Morse Taper MK 3
table: 500 x 400 mm
turning speeds 105 - 2.900 U/min
quill stroke 135 mm
feed: 0,10 - 0,15 - 0,30 mm
total power requirement 0,65 - 0,9 kW
weight 200 kg
Nln99
bore capacity in steel (diameter): 20 mm
throat: 200 mm
bore stroke: 100 mm
spindle taper MT: 2
column diameter: 80 mm
revolution per minute: 500-800-1250-2000 U/min
drill table: 340x280 mm
Bnssz3y8
table rotating: 360 °
table adjustment: 650 mm
total power requirement: 0,4 kW
machine weight approx.: 186 kg
space requirement of the machine approx.: 0,8,x0,5x1,8 m
bore capacity in steel (diameter) 32 mm
throat 250 mm
bore stroke 165 mm
Nlnjz
diameter of quill 76 mm
spindle taper MT 4 MK
table surface area 500 x 560 mm
column diameter 102 mm
turning speeds 120 - 1600 U/min
feeds 0,1-0,15-0,23-0,3 mm/U
distance spindle /table 838 mm
distance spindle/base plate 1100 mm
voltage 380 V / 50 Hz
total power requirement 2 PS
weight of the machine ca. 280 kg.
range L-W-H 0,9 x 0,6 x 2,1 mm
Column drilling machine with stepless speed control (PIV-gear,
automa...
Drilling capacity 25 mm in Steel
Tool taper MK 3
Spindlespeed 230 - 2.160 U/min
Omomv
Overhang 230 mm
Stroke 130 mm
Machineweight 252 kg
bore capacity in steel (diameter):30 mm
throat:330 mm
bore stroke:135 mm
voltage:380 V
taper MK:3
Speed:90 - 2000 U/min.
feed:0,1 - 0,3 m/min
workpiece height max.:600 mm
surface area:450 x 350 mm
Y7mcslory
transmission ratio:2
distance spindle nose and table:30 - 600 mm
column diameter:200 mm
coolant:vorhanden
weight:0,8 t
total power requirement:1,1 kW
dimensions of the machine ca.:0,70 x 1,05 x 2,2 m
Technical data:
- Drilling capacity in steel ST 60 28 mm
- Drilling capacity in steel ST 60 32 mm
- Drill spindle holder MK 3-long spindle
Puyv9y
- drill spindle stroke 140 mm
- Drilling spindle speeds infinitely variable 65 - 1750 rpm
- Throat 280 mm
- max distance table - drilling spindle 620 mm
- Table with 2 T-slots 350 x 320 mm
- Height adjustable via gear rack with crank handle
- Drive 400 V / 0.9 / 1.3 kW
- Space requirement approx. W 600 x H 1800 x D 700 mm
- Weight approx. ...
bore capacity in steel (diameter) 23,0 mm
throat 250 mm
bore stroke 95,0 mm
turning speeds 400 - 5.000 U/min
table-size 370 x 340 mm
column diameter 90 mm
engine output 0,64 kW
spindle taper MT 2 MK
weight - pallet system 120 kg
range L-W-H 0,5 x 0,76 x 1,68 m
Nwz2n
bore capacity in steel (diameter): 25 mm
throat: 310 mm
bore stroke: 220 mm
spindle turning speed - continuous: 40 - 1800 / 12 step U/min
spindle taper MT: 4
Distance spindle/table max.: max: 730 - min: 100 mm
feed: automatisch / 9 step mm/U
table clamping surface:: 450x580 mm
table-size: 550x660 mm
table adjustable: vertikal: 320 mm
table swivable approx.: nein
total power requirement: 6,6 kW
weight of the machine ca.: 652 kg
Bc8w3xlz7f
dimension machine xH: 1,1 x 0,7 x 2,3 m
- drilling capacit...
bore capacity in steel (diameter) 23 / 28 mm
throat 260 mm
Be02auhwjo
bore stroke 120 mm
tool taper MK 3
table-size 500 x 350 mm
column diameter 100 mm
total power requirement 1,3 kW
weight of the machine ca. 400 kg
dimensions of the machine ca. 800 x 600 x 1750 mm
bore capacity in steel (diameter):23 mm
throat:280 mm
bore stroke:220 mm
Speed:1420 U/min.
Y7m79xueu
feed:0,1 - 0,3 m/min
voltage:380 V
workpiece height max.:950 mm
surface area:500 x 500 mm
machined bearing plate::Ja
column diameter:140 mm
table swivable ca.:180°
total power requirement:1,1 kW
weight of the machine ca.:0,5 t
dimensions of the machine ca.:1,4 x 0,6 x 2,05 m
bore capacity in steel (diameter) 30 mm
throat 260 mm
bore stroke 125 mm
spindle taper MT 3
table-size 500 x 365 mm
spindle turning speed - stepless 80 - 3.200 U/min
voltage 400 V
total power requirement 0,8 / 1,5 kW
weight of the machine ca. 250 kg
Npqo9
dimensions of the machine ca. 0,65 x 0,75 x 1,85 m
- Serial-No.: 200896/A
- turning speeds stepless adjustable
- right / left
bore capacity in steel (diameter) 28,0 mm
threading 12 M
bore stroke 130 mm
B389k73s
throat 250 mm
table: 375 x 375 mm
morse taper 3 MK
turning speeds 75 - 3.200 U/min
total power requirement 1,1 / 1,5 kW
weight of the machine ca. 215 kg.
range L-W-H 450 x 600 x 2.020 mm
bore capacity in steel (diameter): 16 mm
throat: 275 mm
bore stroke: 160 mm
spindle turning speed - continuous: 150 - 2360 / 9 step U/min
spindle taper MT: 3
Distance spindle/table max.: max: 580 / min: 100 mm
feed: 0,10 - 0,16 - 0,25 - 0,40 mm/U
table clamping surface:: 300 x 400 mm
table adjustable: vertikal 360 mm
table swivable approx.: drehbar 360°
base plate surface area: 500 x 400 mm
total power requirement: 1,65 kW
Izez7k9
weight of the machine ca.: 652 kg
dimension machine xH: 1,0 x 0,6...
bore capacity in steel (diameter) 30 mm
throat 300 mm
bore stroke 150 mm
fuse protection -thermal 5 A
current capacity 380 V / 50 Hz
table surface area 300 x 400 mm
tool taper MK 3 0
turning speed range: 65-1150 U/min
total power requirement 0,9-1,3 kW
weight of the machine ca. 1,0 t
dimensions of the machine ca. 0,6x1,1x1,8 m
Biatvm7ry8
bore capacity in steel (diameter) 25 mm
throat 255 mm
bore stroke 135 mm
spindle turning speed range 8, von 105-2900 U/min
table-size 500 x 350 mm
column diameter 100 mm
spindle taper MK 3
W3ubo
total power requirement 0,65 / 0,9 kW
weight of the machine ca. 190 kg
dimensions of the machine ca. 0,5 x 0,5 x 1,7 m
Condition: unused
Electric 380 Volt
Drill chuck
Machine dealer with own stock of 2500 m².
bore capacity in steel (diameter) 28 mm
throat 200 mm
bore stroke 105 mm
Bgqhq98lwi
spindle taper MK 3
number of spindle speeds 12
spindle speed: 35 - 5600 Upm
column diameter 92 mm
table-size 340 x 360 mm
table rotating 360 °
total power requirement 1,5 kW
weight of the machine ca. ca. 170 kg
dimensions of the machine ca. ca. 750 x 500 x 1800 mm
Main drive motor [kW] 1,5/400V/980U/min.
Maximum drilling diameter in steel [mm] 25
Maximum bore diameter in cast iron 200 HB [mm] 30
Morse taper in spindle 3
Hole extension (maximum drilling depth) [mm] 140
Vtn9nm
Number of spindle speed ranges 9
Spindeldrehzahlbereich [U/min] 160,230,270,300,441,410,825,942,1342
Hydraulic feed of the spindle (stepless)
Table sizes [mm] 420
Column diameter [mm] 110
Distance of the spindle axis from the column [mm] 320
Net weight [kg] 300
Boring power 23,0 mm
Boring depth max. 140 mm
Center of spindle to wall or column 300 mm
Column diameter 125 mm
Size of table plate 410 x 380 mm
Motor output 1,5 KW
Speed 200 - 2000 U/min.
spindle taper MT 2 MK
voltage 380 V
weight of the machine ca. 470 kg
Dimensions (L/W/H) 500 x 700 x 1950 mm
Bjtoqm7q9x
bore capacity in steel (diameter): Ø 20 mm
throat: 265 mm
bore stroke: 140 mm
spindle turning speed - continuous: 95 - 2000 / 10 step U/min
spindle taper MT: 2
feed: 0,08 - 0,32 / 4 step mm/U
headstock adjustment: 200 + drehbar mm
distance - drill spindle & boring table-adjustable: min./max. 150/600 mm
table surface area: L:350 x B:300 mm
table swivable approx.: rechts/links 90° °
table rotating: 360 °
distance spindle/base plate: max.1000 mm
base plate surface area: L:450 x B:360 mm
total power...
bore capacity in steel (diameter):23 mm
throat:330 mm
bore stroke:120 mm
turning speeds:180 - 1600 U/min
surface area:760 x 360 mm
workpiece height max.:750 mm
voltage:380 V
Mey8l
total power requirement:2 x 0,9 kW
weight of the machine ca.:0,7 t
dimensions of the machine ca.:1,10 x 1,15 x 2,10 m
taper MK:2 x MK 1
column diameter:2 x 130 mm
bore capacity in steel (diameter) 28 mm
bore capacity in cast iron 30 mm
thread capacity in St60
throat 300 mm
bore stroke 110 mm
surface area 400 x 320 mm
spindle taper MT 3
spindle speeds 60 - 1400 U/mm
total power requirement 0,7/1,3 kW
weight of the machine ca. 0,34 t
dimensions of the machine ca. m
Mechanic: good
Optical condition: good
The machine can be viewed under current.
Bobcbi9cza
2937 140 2432
380 V, 50 Hz, cable and plug
Color green
* machined base plate
* stepless sp...
bore capacity in steel (diameter) 23 mm
throat 300 mm
bore stroke 150 mm
table-size 300 x 410 mm
spindle taper MK 2
total power requirement 1,4 kW
weight of the machine ca. ca. 315 kg
Bgqhrjprkj
dimensions of the machine ca. ca. 700 x 900 x 1900 mm
box column gear box drilling machine make STANKO type 2 H 118
Make #43358
Technical data:
drilling capacity steel 22 mm
Spindle holder MK 2
Table size 360 x 320 mm
Drill head and table height adjustable
6 feeds 0,1 - 0,56
9 Spindle speeds 180 - 2800 rpm
Engine power 1,5 kW
External dimensions L x W x H 500 x 700 x 2000 mm
Weight approx. 350 kg
with
- Coolant device
- right + left run
- automatic feed
used, in good condition
Bncro2quqf
Boring power 28,0 mm
bore capacity in cast iron 32,0 mm
Center of spindle to wall or column 300 mm
bore stroke 150 mm
Size of table plate 405 x 315 mm
Speed 150 - 3.000 U/min.
spindle taper MT 3 MK
voltage 380 V
Motor output 0,7 / 1,3 KW
weight of the machine ca. 325 kg
Gthejcqp3
range L-W-H 750 x 650 x 1900 mm
Tool holder: MK 3
drilling capacity: 25 mm
Spindle speeds: (8) 130 - 1,500 rpm
table size: 280 x 320 mm
Equipment:
Dvonxu
Machine light
Drilling depth display
Fine adjustment of drilling depth via countershaft gear
Fine feed via hand wheel
machined foot with T-slots
new toggle switch for pole change
new retaining spring
new cable
Column drill SERRMAC V 22 E
New " CE "
Electronic speed variator supplied
Turntable + vice mm 350 X 250
Drilling capacity on steel R50 mm ø 22
Tapping capacity on steel R50 mm M 14
CM2 spindle cone
Spindle stroke mm 90
Biguro3tye
Spindle sleeve diameter mm 52
Column diameter mm 98
Spindle centre column distance mm 201
PU transmission - Electronic variator (E)
Spindle speed rpm 270 ÷ 4.200
Motor power kW 0.75 / 220 V Single-phase
Dimensions (h x w x d) mm 1650x850x500
Weight Kg 170
Column drill,
...
Technical data:
- Drilling capacity in steel ST 60 25 mm
- Drilling spindle holder MK 3
- 8 drilling spindle speeds 100 - 2700 rpm
- drill spindle stroke 130 mm
- 4 feeds 0.1 - 0.3 m/rev
- Overhang 270 mm
- Column diameter 115 mm
- drilling unit + table height adjustable
Iotgmri9
-with crank handle over rack
- Table dimension 350 mm
- Drive 400 V / 0.8 / 1.1 kW
- Space requirement approx. W 800 x H 1850 x D 900 mm
- Weight approx. 250 kg
- column drill -second hand-
- BGU - SB 310
- max. drilling capacity: 30mm
- tool tapper: MK 3
- distance column - spindle: 280mm
- stroke: 220 mm
- spindle speeds 145 / 350 / 420 / 700 / 840/ 1000 / 1400 / 1475 / 2000 / 2950rpm
- dimension of table: 300 x 430 mm
- electrical power: 1,1 / 1,6kW
Gwb2hs
column drilling machine make BULMAK type PK 203
Technical data:
Drill diameter in steel 20 mm
max. drilling diameter in cast iron 35 mm
Spindle holder MK 3
spindle stroke 160 mm
12 spindle speeds 95 - 2000 rpm.
Bl9pyuqwim
3 automatic feed steps 0.08 / 0.16 / 0.32 mm/min
Table working surface 320 x 345 mm
Table height adjustable via gear rack
distance spindle axis - table 30 - 630 mm
Column diameter 130 mm
Drive power 0.7 / 1.1 kW
external dimensions 970 x 555 x 1922 mm
Weight approx. 470 kg
used...
bore capacity in steel (diameter) 28,0 mm
throat 295 mm
bore stroke 180 mm
spindle taper MK 3
turning speeds 130 - 1750 U/min
column diameter 115 mm
table: 305 x 400 mm
feed 0,15 mm/U
engine output 1,1 kW
weight 275 kg
Dxajla
range L-W-H 850 x 515 x 1990 mm
Erlo gear drill model TS 25/32, 8 speeds from 75 to 2100rpm, drilling capacity in steel 25mm in cast iron 32mm, distance from the column to the center of the drill 300mm, column diameter 125mm, 1.3 Kw motor, with coolant pump, drill in general in good condition
Blexqcxmlh
Standard equipment
- Thread cutting device
- Control panel with OLED display
- robust, high quality drill head hood
- LED lighting
- quickly adjustable and ergonomic drill depth stop
- infinitely variable speed control via rotary knob
- thermal overload protection
- Spindle stop
- Drill protection with electrical fuse
- Connection cable with CEE plug
- mechanical feed of the Z-axis
- incl. electromagnetic clutch for 3 feed speeds
- Drill cross with push button
- in thread cutting mode: right-lef...
1 x pillar drilling machine
Maxion
BS 25
Year of construction : ca.1990
Very nice machine from Laehrwerkstatt
Technical data:
Drill diameter max. 25 mm
(in steel)
spindle mount: MK 3
spindle speed: 80 - 1,400 rpm
(in 2 stages via motor and 5 stages each via pulleys)
table surface: 365 x 500 mm
Projection: 260 mm
maximum distance chuck to table: 640 mm
Accessories:
1 x drill chuck 2 - 16 mm
Eulpilfr3
1 x drill vice
1 x driving wedge
1 x coolant device
1 x operating instructions
The machine can b...
Spindle taper MT3
Ewi2hpyx0
Spindle speeds 25-2560 rpm
Quill stroke 150mm
Throath 220-610mm
Distance spindle - table max 530mm
Table size 700x540mm
at the side 880x700mm
MARCELS MASCHINEN CH
Column drilling machine make WMW Saalfeld type BS 25
Technical data:
drilling capacity 25 mm
Spindle mount MK 4
Throat 315 mm
Work surface 400 x 500 mm
drill spindle stroke 200 mm
9 Spindle speeds 63 - 1000 rpm
headstock adjustment 280 mm
9 Feed rates 0.08 - 1.25 mm/rev
Drive power 2,3 kW
Weight approx. 1000 kg
N73pt
external dimensions approx. 1000 x 700 x 2300 / 2700 mm
used, in good condition
Boring power 28,0 mm
bore capacity in cast iron 32,0 mm
Center of spindle to wall or column 295 mm
Column diameter 115 mm
bore stroke 120 mm
Size of table plate 305 x 305 mm
Blsdl20q87
Speed 125 - 3150 U/min.
spindle taper MT 2 MK
voltage 380 V
Motor output 0,75 KW
range L-W-H 600 x 850 x 1800 mm
weight of the machine ca. 225 kg
For sale is a used gear drilling machine
Make / Type STANKO 2H118
Machines No. 424600
Year of manufacture 1975
Drill Ø 22 mm in ST 37
Projection 200 mm
Table width 400 mm
Cmkn7dnd
Table length 350 mm
Sleeve travel maximum 250 mm
Speeds maximum 2800 rpm
Minimum speed 180 rpm
Maximum power 1,5 kW
TischᐸᐳSpindel max. distance 600 mm
maximum feed rate 0.5 mm/rev.
smallest feed 0,1 mm/rev.
Tool holder MK2
Weight 350 kg
Space requirement L * W * H 500 mm * 800 mm * 2000 mm
Description:
Bench and column drilling machine with belt drive
Easy to use security switch to IP 54 with undervoltage release and separate emergency stop pushbutton
400 Volt models with right/left rotation
Drilling depth stop
Precision machined table with diagonal T-slots
Height adjustment of the drilling table with rack and pinion
Drill table ± 45 ° tilt and 360 °
V-belt cover with safety switch
Aluminium die-cast tailstock lever from one piece with Softgrip-handles
Industrial motor
...
Duration / ALB ear power 25/30 mm
Thread cutting capacity Max M20
Spindle MK III
Drilling depth 125 mm
Throat depth 260 mm
Column diameter 110 mm
Usable surface [BxL] 420 x 340 mm
Speed display scale
Drilling depth indicator scale
Drilling depth stop with fine adjustment
Table height with rack and pinion
Motor three-phase 400 V pole changing bar 0.90/1.45 kW
Spindle speed with idle,
continuous 125-4000 1 / min
in 2 levels I: 125-2000 1 / min
II: 250-4000 1 / min
The levels change via belt apport...
Column drilling machine make TRAPANI Brevettat type MK 2
Technical data:
drilling capacity 20 mm
quill stroke 100 mm
Spindle holder MK 2
Bjwr9jlgnp
Column diameter 100 mm
Throat 250 mm
Table size 250 x 250 mm
5 spindle speeds 270 - 1900 rpm.
max. distance spindle / table 630 mm
max. distance base plate / spindle 1100 mm
Drive power 1 HP
external dimensions 500 x 800 x 1750 mm
Weight 180 kg
with
- Foot with T-slots
- Drill Chuck
- The machine can be operated with 380 V and also 220 V
(engine ga...
Column boring machine Fabr.BIMAK Typ:25 Bj.1986
Drilling power in steel: 25mm
Spindle intake: MK3
Spindle speeds: 135-1900U/min engine KW 0.75
Pino-dub: 110mm
With 3 levels of combined
Tense-up table: 300mmX300mm rotary bar and swivel bar
Screw back-to-width 95mm wingspan 85mm Verstell etc swivel bar
Prism up to 30mm swivel.
Vsqkdi
With fast drilling feed, exit wedge, NOT-AUS mushroom pressure button, lamp,
Machines Spindel LRuns Very Quiet.
Dimensions: Length 830mm width 580mm height 1710mm...
drilling capacity steel/GG: 23 mm
spindle taper: 2 MK
arm length: 300 mm
Naxbkfeu9
table size: 300 x 300 mm
spindle sleeve stroke: 100 mm
spindle turning speed range: 190 - 1500 rpm
engine: 380 V, 0,5/0,75 kW
space needed: 410 x 670 x 1950 mm
weight: 180 kg
DescriptionRobust bench and column drilling machine with automatic quill feed. Speed electronically adjustable Powerful brushless drive with particularly smooth running and high performance with almost constant torque over the entire speed range Best power transmission through aluminium pulleys in conjunction with toothed GATES quality V-belt High running smoothness thanks to ground multi-tooth driver True running accuracy guaranteed less than 0.015 mm measured in the drilling sleeve Separate em...
