Used Drives for sale (21,172)

Condition: new, ABB Drives SAFT 171 PAC Pulse Amplifier, serial no. according to photo, unused, 100% functional, scope of delivery according to photos Nsdpfx Asi D Tq Uof Eolh

Condition: used, Synchronous servomotor with holding brake and gearbox, geared motor, electric motor, angular geared motor Motor: Manufacturer: LUST LTI DRIVES Type: LSK-190-7-30-560 T1,P,KK,1R Order No.: 716090 Art. No.: 0970.8016 Machine type: Permanently excited synchronous servo motor DC link voltage of the controller Uzk: 560 VDC Rated power: 14.51 kw Rated speed: 3000 rpm Rated torque Mn: 46.2 Nm Standstill torque M0: 83.4 Nm Rated current In: 31.5 A Standstill current I0 / I0max: 54.9 / 219.6 A Pole pairs: 3 Shaft diameter: 32 mm Shaft length 50 mm - Shaft journal with key and keyway DIN 6885 / A10x8x50 - Option 1R Resolver 1-pole pair - Option KK Terminal box - Option T1 (DIN-PTC double base insulated) - Power connection 8-pin junction box - Resolver connection 12-pin junction box Holding brake: Manufacturer: LUST LTI DRIVES Type: NFH10-H/BA Order no.: 718690 Art. No: Nodpfx Afsf Dlzue Ejlh Rated voltage: 24 VDC Rated current: 4.5 A Rated power: 108 W Braking torque: 65 Nm Angular gearbox WESTFALIA Systemtechnik Hollow shaft output: internal Ø 65 mm Hollow shaft length: approx. 280 mm Gearbox output speed: max 450 rpm Speed gearbox input: max 4500 rpm. Transmission ratio: 10:1 - Shaft journals also ground on the outside - Gearbox can be mounted on two flange surfaces - Mounting hole on gearbox 180 x 180 mm / 180 x 230 mm Overall dimensions L x W x H: 1110 x 250 x 350 mm Total weight: 180 kg good condition

Condition: excellent (used), Year of construction: 2014, Gearboxes, spur gears, bevel gears, transmission gears, crane gears, hoist gears, grab lifting and closing gears -Manufacturer: PIV Drives, gearbox type D-315-22H -Translation: 34.726 :1 -Motor: without electric motor (can be supplied at extra cost) -Input- shaft: Ø 60 x 140 mm -Output hollow shaft: Ø 160 x 500 mm -Dimensions: 720/1300/H725 mm Nledpfxsvxq Nuj Af Esh -Weight: 1321 kg

Condition: used, power capacity 15 kW volt 380 V Nodjvttctepfx Af Eslh ampere 28 A weight of the machine ca. 84 kg

Condition: used, Synchronous servo motor with holding brake and gear, Geared motor, electric motor, angular gear motor Engine: Manufacturer: LUST LTI DRIVES Type: LSK-190-4-30-560 T1,P,KK,1R Order no.: 716090 Art. No.: 0970.8015 Machine type: Permanently excited synchronous servo motor DC link voltage of the controller Uzk: 560 VDC Nominal power: 12,13 kw Nominal speed: 3000 rpm Nominal torque Mn: 38,6 Nm Standstill torque M0: 61.5 Nm Rated current In: 26.6 A Standstill current I0 / I0max: 41 / 164 A Pole pairs: 3 shaft diameter: 32 mm Wavelength 50 mm - Shaft journal with keyway and keyway DIN 6885 / A10x8x50 - Option 1R Resolver 1 pole pair - Option KK Terminal box - Option T1 (DIN-PTC double basic insulation) - Power connection 8-pole junction box - Resolver connection 12-pole junction box Holding brake: Manufacturer: LUST LTI DRIVES Type: NFH10-H/BA Order no.: 717173 Art. No.: 228-00043 Nominal voltage: 24 VDC Rated current: 4.5 A Njdpof Dlzqsfx Af Eelh Nominal power: 108 W Braking torque: 160 Nm Angular gearboxes WESTFALIA Systemtechnik Shaft journal output: Ø 60 mm with feather key Shaft journal Length: approx. 120 mm Gearbox output speed: max 450 rpm. Gearbox input speed: max 4500 rpm. Transmission ratio: 10:1 - Gearbox can be mounted on two flange surfaces - Mounting hole on gear unit 180 x 180 mm / 180 x 230 mm - Transmission with 3-fold sprocket outer diameter: 147 mm, number of teeth: 17 Overall dimensions L x W x H: 1020 x 250 x 350 mm total weight: 175 kg sound condition 2 pieces available, price per piece [...]

Condition: used, Hydraulic Power Unit, Hydraulic Power Pack HYTORC Mobile hydraulic power unit for hydraulic torque wrenches, hydraulic drives Nodpfx Aexf Ux Ajf Eelh Type: JP 10.3 - 2T-PA Year of manufacture: approx. 2010 Operating pressure: max. 700 bar Delivery rate in low-pressure range: approx. 6 l/min Tank capacity: approx. 5 liters Motor power: 1.5 kW Power supply: 230 Volt, 50 Hz - Manual control - Hydraulic pressure adjustable manually via pressure control valve - Pressure gauge up to 1000 bar - Cable remote control - 2 high-pressure quick-release couplings (1x coupling, 1x plug) Type CEJN Series 115 Space requirements (L x W x H): 460 x 320 x 420 mm Net weight: 32 kg Good condition 3 units available, price per unit

Condition: used, B&R Acopos 1090 servo drive 8V1 removed from Engel robot ERC-6510-E - removed from running machine - fully functional Nsdpfx Aeiyzwwef Eelh manufacturer: B&R type: 8V1090 manufacturer no.: 8V1 spare part no.: Before purchasing, please check whether the Acopos you require also has an 12-pin green connector.  If the spare part is traded in as an exchange, a partial credit note will be issued after receipt of the defective part and inspection by the manufacturer. We reserve the right to refuse a credit note due to the condition or age of the returned part. The defective part must be in a repairable condition, the credit note will be issued after feedback from the manufacturer. Dition: gebraucht

Condition: new, ABB DC Drives DCT880-W03-01 Nodpfjuadi Sex Af Ejlh LARGE STOCK AVAILABLE

Condition: used, Motor spindle, milling spindle, motor spindle, AC spindle motor, electric motor, DC motor, servo motor, milling motor -Application: Milling/Drilling -Motor spindle: was tested on a robot -Operating hours: 4350 hours -Motor spindle: 55 kW -Servo inverter: Lenze Servo Drives 9400 -Recording: HSK32 -hydraulic tool clamping OTT Type: 95.102.779.0.2 V01 Nledpjdntf Hsfx Af Esh -Spindle cooling BKW type: WRK07/PC41 -Control cable -Dimensions of control cabinet: 1118/800/H2430 mm -Weight: 694 kg

Condition: excellent (used), Hydromotor for screw cylinder Injection unit size ES3550 Hägglunds Drives Type CA50 20 2 0 0 N 004 Nlodpfx Afsfnqago Ejh

Condition: used, HFA-L-440 S, fimotec-fischer, linear oscillating drives and fork light barrier Model: 08-6073-02 Type: HFA-L-440 S Nlsdpfx Aoutag Iof Esh Condition: Used

Condition: used, Transistor pulse inverter for three-phase feed drives with analog control, servo controller SIEMENS type Simodrive 610 6SC6101-3A-Z Fab. No.: A 822M103 Z = A30+A20+A18 Year of manufacture: 1989 The Simodrive 610 transistor pulse inverters have been developed to supply the 1FT5/1FS5 three-phase servo motors. The dynamic characteristics of these motors are to be used optimally. The pulse inverters can be used for a wide variety of tasks by equipping the power section accordingly. This flexibility is further increased by expansion modules for the power section. Supply voltage: 3 AC 50/60 Hz 165 Volt or DC 220 Volt (suitable transformer: 380/165 Volt 5kVA (not included in delivery) Output voltage: 3 UC 200 Volt Nodpfxsh D Syvo Af Eslh Efficiency: approx. 95 Number of feed axes: 4 Speed reference: +-10 volts Auxiliary voltage: 24 volts Relay contact for messages fault/ready for operation dimension WxHxD: 339 x 440 x 300 mm Weight: approx. 25 Kg The servo drive is still ready for operation in a Gildemeister GDM42. Further components from the Gildemeister you will find under stock numbers: 60343, 60347, 60348

Condition: used, B&R Acopos 1045 servo drive 8V1 removed from Engel robot ERC-6510-E - removed from running machine - fully functionalmanufacturer: B&R type: 8V1045 manufacturer no.: 8V1 spare part no.: Before purchasing, please check whether the Acopos you require also has a 12-pin green plug.  Nlsdpeiyzw Eofx Af Esh If the spare part is traded in as an exchange, a partial credit note will be issued after receipt of the defective part and inspection by the manufacturer. We reserve the right to refuse a credit note due to the condition or age of the returned part. The defective part must be in a repairable condition, the credit note will be issued after feedback from the manufacturer. Dition: gebraucht

Condition: used, Year of construction: 2000, functionality: fully functional, DC drives and excitation units - manufacturer Control Techniques, Great Britain - excitation unit 5 pcs FMX5 10-20A, DC converter 6 pcs MENTOR II - type M350GB14, functional. Nedpfjwmy Egex Af Eelh

Year of construction: 2018, condition: excellent (used), bestehend aus zwei Stück Zahnriemenachsen EGC-80-1300-BS-10P-KF-0H-ML-GK und vier Stück Linearführungsschienen HGR 20C 1705V9-10A00 mit HIWIM Linearblock HGW CCC 170 3W3-10200 Nledeg Ixumepfx Af Eoh Zwei Unimotore 075E3C300BACAA075140 mit Zwei EMERSON UNIDRIVE M 701-3200050A

Condition: refurbished (used), ABB SDS 100 servo drives SDS105-077A0-670V01-0070 3ADT211038R1200 SN 53.4kVA overhauled by the manufacturer Nsdpfed Iu Uwjx Af Eolh EPROM Input 670V DC Output 0-400V AC Very large selection of ABB Servo Drive. Our devices were all overhauled. See pictures. Devices are shipped regardless of the date of the overhaul. Please note that the colors on your screen may differ slightly from the original colors.

Condition: used, SANYO SANMOTION Servodrive for Y-axis- with firmware for the Y-axis - removed from Wittmann W721 Nledpfx Aot Sbfief Eoh - refurbished3 months warranty: This is provided exclusively by a manufacturer's inspection. The process is carried out by Complast ufacturer: SANYO type: QS1A03AA Dition: überholt

Condition: refurbished (used), ABB SDS 100 servo sürücüler Nljdpfx Afod Iu Ulo Esh SDS102-069A0-400V00-0000 3ADT211027R0001 46kW üretici tarafından elden geçirilmiş 670V DC çıkış Giriş 380-400V AC 39 kg Çok geniş ABB Servo Sürücü seçimi. Cihazlarımızın hepsi elden geçirildi. Resimlere bakınız. Cihazlar, elden geçirme tarihine bakılmaksızın gönderilir. Lütfen ekranınızdaki renklerin orijinal renklerden biraz farklı olabileceğini unutmayın.

Condition: used, B&R Acopos 1016 servo drive- removed from Remak RX43 - removed from running machine Nlsdpfx Ajrr Egajf Eoh - Fully functionalmanufacturer: B&R type: 1016 manufacturer no.: 8V1 Rev. H0Before purchasing, please check whether the Acopos you require also has an 18-pin grey connector. If the spare part is traded in as an exchange, a partial credit note will be issued after receipt of the defective part and inspection by the manufacturer. We reserve the right to refuse a credit note due to the condition or age of the returned part. The defective part must be in a repairable condition, the credit note will be issued after feedback from the manufacturer. Dition: gebraucht

Condition: refurbished (used), ABB SDS 1000 Servo Drives Nodpfxod Iu U Ho Af Eolh SDS101-021A0-670V01-0000 3ADT211003R0002 EPROM SN 13.2 kVA overhauled by the manufacturer Input 670V DC Output 0-360 V AC Very wide range of ABB Servo Drive our devices have all been overhauled. See pictures. Devices are shipped regardless of the date of the overhaul. Please note that the colors on your screen may differ slightly from the original colors.

Condition: used, B&R / 8V1 Acopos 1022 servo amplifier- refurbished - 3 months warranty: This is done exclusively by a manufacturer's inspection. The processing is carried out by Complast GmbH. - taken out of running machine - fully functionalmanufacturer: B&R type: 1022 manufacturer no.: 8V1Bitte achten Sie vor dem Kauf darauf, ob der von Ihnen benötigte Acopos ebenfalls einen 12-poligen grünen Stecker hat. If the spare part is traded in exchange, a partial credit note will be issued after receipt of the defective part and inspection by the manufacturer. We reserve the right to refuse a credit note due to the condition or age of the returned part. The defective part must be in a repairable condition, the credit note will be issued after feedback from the manufacturer. Nedpfxjp Rb Iaj Af Eolh Dition: überholt

Condition: like new (used), Year of construction: 2023, functionality: fully functional, power: 1.5 kW (2.04 HP), torque: 277 Nm, Nord drivesystems Sk 93672.1ABH-90LP/4 Nlodpfx Afowrm E Ro Eeh

Condition: good (used), Year of construction: 2020, Gear motor - Nord Drivesystems Nlodpfxjv Uh S Ee Af Eoh - 0.75kW - 4rpm - Type SK 9043.1VF-80LP/4 - 2020 -Weight 160kg - Price per 1 pc.

Year of construction: 2016, condition: as good as new (ex-display), 1.piece .heavy duty gearboxes Make: NORD DRIVESYSTEMS Type: SK9082.1/52 Njdpjh Igwhofx Af Eolh 1.piece Left version Shaft diameter 110 mm Shaft length 210 mm M/2 12000 Nm i123,13 Dimensions lying : Length 1200 mm width (with shaft 210 mm) 600 mm Height 600 mm Weight each : 620 Kg Like new Only test run. Can be mounted lying or standing

Year of construction: 2019, condition: good (used), Block Helical Inline Gearmotor Manufactur: NORD Drivesystems Model: SK 83 - 180MP/ 4 TF year of construction: 2019 fabrication-N°: 202621779-100 Power: 18,5 kW Output torque: 3882 Nm Base weight: apr. 440 Kg Data sheet available. Nledpslkd Emsfx Af Eeh The ad is being edited, more detailed specifications & Plant description will follow. Transport can be organized if required. Welcome to Oussman-Machinery Please feel free to contact us for any further information. We speak: english, german, arabic & french. Oussman-Machinery