Manufacturer Ixion
Model BS 23 AVSTG
year of manufacture 1991
Machine No. 144574
Fgdlxxgl
Technical data:
automatic feed 0,1/0,16/0,25
Thread cutting function
pole-switchable motor
Speed adjustment infinitely variable 80-1400 rpm
Work light
Throat 260mm
Pinol stroke 120mm
Recording MK 3
Quick acting chuck Albrecht 3-16mm
table clamping surface 400x270mm
height of the machine 1800mm
Drilling capacity in steel 25 mm
Drilling capacity in GG 35 mm
Drilling spindle holder MK 3
Speed range, 2 steps + infinitely variable 207 - 1450 rpm
spindle throat 310 mm
Su0ofc
spindle stroke 160 mm
table size 450 x 500 mm
feed rate 0,1 / 0,2 / 0,3 mm/rev
motor power 0,85 / 1,5 KW
dimensions L x W x H 700 x 1000 x 2200 mm
Machine weight approx. 450 kg
Accessories / special features:
- Automatic feeds with cross-handle control
- R-L-run
- Stepless speed adjustment
- Pole-changing motor for sing...
box column gear box drilling machine make STANKO type 2 H 118
Make #43358
Technical data:
drilling capacity steel 22 mm
Spindle holder MK 2
Table size 360 x 320 mm
Drill head and table height adjustable
6 feeds 0,1 - 0,56
9 Spindle speeds 180 - 2800 rpm
Engine power 1,5 kW
External dimensions L x W x H 500 x 700 x 2000 mm
Weight approx. 350 kg
with
- Coolant device
- right + left run
Bncro2quqf
- automatic feed
used, in good condition
Lg. no. 21037
Technical data:
- Drilling capacity in steel ST 60 30 mm
- Thread cutting device
- Drilling spindle holder MK 3
- 8 drilling spindle speeds 75 - 3100 rpm
- drilling spindle stroke 160 mm
- 4 feeds 0,1 - 0,3 m/rev
- throat 300 mm
- column diameter 115 mm
- drilling unit + table height adjustable
- with hand crank via toothed rack
Pa8gt
- table dimensions 540 x 340 mm
- machined foot plate with T-slots
- max. distance spindle - table / foot plate 800 / 1200 mm
- space requ...
Gear column drilling machine make WMW VEB Saalfeld type BS 25B
machine. # 9587/59
technical data:
drilling capacity in steel - dia. 4 - 32 mm
Thread cutting ST 60 / Alu up to M 20 / M 32
spindle adaptor MK 3
throat 280 mm
drilling stroke 150 mm
4 spindle speeds 125 - 710 rpm.
4 feeds 0.10 / 0.16 / 0.25
table size with trough 570 x 475 mm
table size clamping surface 450 x 355 mm
Drive power 3 kW
Weight 700 kg
outer dimensions 900 x 570 x 2400 mm
with
- automatic feeds
- tapping with compensating ...
Box column drill
Magnum TB E 5014
Infinitely variable speed
400 - 4500 / min
230 - 240 V - 50-60 Hz
Max in steel D14 mm
Bnmx0t7k
With stand
Without stand 380
Column drilling machine CORDIA type S-30
Masch. No. 625530 built in about 1978
Drilling capacity 30 mm
Spindle mount MT 3 - short sleeve
Throat depth 300 mm
Pinolhub 120 mm
Table size 500 x 450 mm
Column diameter 120 mm
Bc9vc7pzkp
Spindle speed 90-1450 RPM 9 levels
Motor power max. 2,2 kW
Power supply 380 v, 50 Hz
-Pole-reversible main engine with 3-speed
-3 reduction stages
-Table height adjustment via hand crank
-Clamping surface on the machine foot
Dimensions L x W x H 700 x 500 x 2100 mm
Wei...
Column drilling machine Corfia S 23 G
drilling capacity 23 mm
Thread cutting device M 16
Speed 420 - 1450 rpm
Vi2uvdm
9
1. pillar drilling machine, manufacturer: WEBO, type: VARIA 40, own weight: approx. 1.100 kg, operating voltage: 380 V
Y3ttbdt9
Column drilling machine Fabr.GILLARDON Type: GR 40 VE Bj.1999
with 2 step motor and stepless speed.
Bustgmzwpz
Drilling capacity in steel max : 40mm
Drilling stroke max:200mm
Spindle adaptor : MK4
Spindle speed : 60 -1600 rpm
3 Automatic feeds : 0.1 / 0.16 / 0.25 mm/min
Table size:630mmX530mm Clamping area :400mmX500mm
Column diameter : 130mm
Space requirement : L1100mm W600mm H2000mm
Machine is in very good condition .
OFFER 21231
Technical data:
- Drilling capacity in steel ST 60 23 mm
- Drilling spindle holder MK 2
- drilling spindle stroke 100 mm
Bwmdjhuhwd
- drilling spindle speed infinitely variable 125 - 4000 rpm
- right and left rotation
- throat 240 mm
- max distance table - drilling spindle 800 mm
- max distance foot plate - drill spindle 1250 mm
- Table with 2 T-slots 400 x 320 mm
- Height adjustable via toothed rack with hand crank
- Drive 400 V / 0,75 kW
- Space requirement approx. W ...
Power: 1,1kW
Drilling capacity steel / continuous drilling capacity: 30mm / 25mm diameter
Speed range: 120 - 1810 rpm
Speed steps: 9
Spindle mounting: MK-4
Drilling stroke: 120 mm
Burjfxaocz
spindle throat: 254 mm
table size: 475 mm x 425mm
Drilling table lateral tilting / rotating: 45° left / 360°.
column diameter: 80 mm
Quick chuck: 1 - 16 mm
Weight: 132 kg
Column drilling machine blood HARDT type 4BA
Engine No. 9123 built circa 1968
Drilling power 40 mm
Spindle cone MK 4 - long sleeve
Throat depth 290 mm
Pinolhub 200 mm
Table size ø 500 mm
Column diameter 155 mm
Spindle speed 112-1120 RPM 6 levels
Feed rate 0.08 - 0.12 - 0.24 mm / U 3 levels
Motor output 1,5 kW
Power supply 380 v, 50 Hz
-6 speed 3 gears and two switchable during transmission levels =
Bc9z0kfdkl
-Clamping surface in the tool's base 400 x 400 mm
-Table height adjustment with hand cr...
Motor pole-changing S6
Bwj2tby07r
0.7kW/670U/min./400V.
1.3/kW1400U/min./400V.
Speeds - Stepless 200 - 3600 rpm.
Drilling capacity St60 - 25mm
Spindle mounting MK2.
Spindle stroke - 80mm.
Column diameter - 90mm.
Throat - 210mm.
Table size 300 x 420 mm.
Weight - 220kg.
Tool holder: MK 4
Drilling capacity: 40 mm
Tapping capacity: M 24
Speed range, infinitely variable: 100 - 1800 rpm
spindle stroke: 160 mm
feeds: 0,1 / 0,2 / 0,3 / 0,4 mm/rev
table size: 615 x 480 mm
throat depth: 300 mm
column diameter: 140 mm
motor power: 1,4 / 2,2 kW
Connection: 400 V / 16 A
Weight, approx.: 530 kg
Dimensions LxWxH approx.: 620 x 1100 x 1870 mm
Equipment:
- Machined base with T-slots
- Stepless speed adjustment
- Machine lamp
- Feeding device
- Coolant foot with pump
- Thread ...
throat depth: 350drilling diameter: 40/45
Bv8irqlkm
Offer 21203
Technical data:
- Drilling capacity in steel ST 60 30 mm
- Drilling spindle adaptor MK 3
- 4 feeds 0.1 - 0.16 - 0.25 - 0.4 mm/rev.
- 6 drilling spindle speeds 85 - 1500 rpm
- drilling spindle stroke 250 mm
- throat 350 mm
- table with 3 T-slots height adjustable 500 x 500 mm
- table can be tilted left + right
Vulahi
- max. distance table - drilling spindle 500 mm
- max. distance machined base plate - drilling spindle 1050 mm
- column diameter 160 mm
- illumination
- dr...
Power: 0,75kW / 400V
Drilling capacity steel / continuous drilling capacity: 25mm / 20mm diameter
Speed range: 200 - 2440 rpm
Speed steps: 12
Spindle mount: MK-3
Drilling stroke: 95 mm
spindle throat: 209 mm
table size: 308 mm x 308mm
Drilling table lateral tilting / rotating: 45° left / 360°.
column diameter: 80 mm
Burjgtt883
Quick chuck: 1 - 16 mm
Weight: 116 kg
Column drilling machine ZMM METALIK type nK 203
make no. 7000 year of construction 1978
drilling capacity: 32 mm
spindle cone: MK 3 - long quill
throat 280 mm
pinol stroke 160 mm
table size 345 x 320 mm
column diameter approx. 130 mm
spindle speed: 95 - 2000 rpm. 12 steps
feed rate: 0,08 - 0,16 - 0,32 mm/rev 3 steps
Mains connection: 380 Volt 50 Hz
Motor power: 0,7 and 1,1 kW pole-changing
- Spindle speed via 2 gear stages, 2 motor speeds and 3 V-belt stages
- drilling spindle with right and lef...
Main drive motor [kW] 1.5/400V/980rpm.
Maximum bore diameter in steel [mm] 25
Maximum bore diameter in cast iron 200 HB [mm] 30
Morse taper in spindle 3
Hole extension (maximum drilling depth) [mm] 140
Bwj2ql8iji
Number of spindle speed ranges 9
Spindeldrehzahlbereich [U/min] 160,230,270,300,441,410,825,942,1342
Hydraulic feed of the spindle (stepless)
Table size [mm] 420
Column diameter [mm] 110
Distance of spindle axis from column [mm] 320
Net weight [kg] 300
Drilling capacity, Ø: 40 mm
Drilling capacity, depth: 175 mm
Speeds: 65 - 1200 rpm
Spindle mounting: MK4
spindle throat: 345 mm
drive: 1,6/2,2 kW
Remark:
Bv7tqsmk78
automatic feed,
thread cutting device,
infinitely variable speed control,
drill chuck,
quick-action drill chuck with mounting
Weight: 560 kg
3 pieces pillar drilling machine FLOTT SB 23 L
380 volt
1,1 kW
year of manufacture 1982
good condition from school use
Bv879r8bmo
therefore differentially taxed - i.e. sales tax not provable
Price PER Piece
Offer 21205
Technical data:
- Drilling capacity in steel St 60 32 mm
- Drilling capacity in steel St 60 40 mm
- Drilling spindle mounting MK 3
- Drilling spindle speed AZ-gear infinitely variable
- in 2 speed ranges 70 - 1200 rpm
- right - left rotation
- Drilling spindle stroke 120 mm
- throat 290 mm
- column diameter 145 mm
Bwj2vxtnr0
- table with 2 T-slots 360 x 320 mm
- distance table-drilling spindle min / max 35 / 640 mm
- distance drilling spindle 1150 mm
- drive 400 V / 0,...
Power: 0,75kW
Oxf7z
Speed range: 280 - 2600 rpm
Speed steps: stepless
Spindle mounting: MK-3
Drilling stroke: approx. 80 mm
Spindle throat: approx. 220 mm
Weight: 100 kg
Column drilling machine ALZMETALL type from 60 S
Masch. No. 228 built in 1987
Drilling capacity in steel 65 mm
Drilling capacity in cast iron 75 mm
Bdnlrr20vw
Spindle mount Mt 5 - short sleeve
Throat depth 400 mm
Pinolhub 240 mm
Table size 730 x 540 mm
Column diameter 260 mm
40-1200 RPM infinitely variable spindle speed
Motor power 5 and 7.5 kW pole-shift bar
Power supply 400 Volt, 50 Hz
-automatic feed in 5 levels of 0.1 0,14-0,2 0.28 0.4 mm / Rev
-Transmission level for high torque at low spee...
Motor pole-changing S1
1.0kW/690U/min./400V.
1.6/kW1370U/min./400V.
Speeds - Stepless 225 - 4300 rpm.
Drilling capacity St60 - 30mm; Cast iron - 35mm.
Spindle mount MK3.
Spindle stroke - 140mm.
Column diameter - 115mm.
Throat - 295mm.
I0slwhbpe
Table size 400 x 300 mm.
Weight - 300kg.
COLUMN DRILLING MACHINE IBERDRILL BC-50 VE
TECHNICAL DATA - STANDARD
max. drilling capacity for steel (St 60) at continuous power S1 Ø 50 mm
max. drilling capacity for grey cast iron (GG 20) at continuous power S1 Ø 60 mm
Max. tapping capacity for steel (St 60) at continuous output S1 M 42
max. tapping capacity for grey cast iron (GG 20) at continuous output S1 M 50
tool holder in spindle MK 4
max. spindle stroke (drilling depth) 200 mm
motor power spindle 4 kW
Drive 3-speed gearbox and V-belt
S...
column drilling machine make WEBO type B 20
Make # 149/41
Technical data:
drilling capacity 20 mm
8 spindle speeds 125 - 1400 rpm.
Spindle mount MK 2
Projection 255 mm
spindle stroke 190 mm
Table size 450 x 360 mm
with 2 T-slots 14 mm
Drive power 1.3/ 1.1 kW
Dimensions 1000 x 600 x 1900 mm
Dwwpcy
Weight approx. 400 kg
with
- Foot switch
- Table height adjustable 400 mm
- head height adjustable approx. 250 mm
used, in good and functional condition
Column drilling machine
Fab. Alzmetall Typ. AX 3 SV
very good condition, year 2003
Technical data:
Make: Alzmetall
Type: AX 3 SV
Year of manufacture: 2003
Drilling capacity in St 60: 40 mm
Thread cutting in St 60: M 24
Thread cutting in GG 20: M 30
Short spindle: MK 3
spindle speed - infinitely variable: 80-1125 rpm
spindle stroke: 120 mm
throat depth: 293 mm
column diameter: 115 mm
machine table - usable support 515x360 mm
distance spindle / table min./max. 117/701 mm
T-slots number - width - d...
Column drilling machine ALZMETALL type AB4/SV
Spindle: CM4
Spindle exit: 150 mm
Spindle speed: from 80 to 710 RPM
Table size: 720 x 560 mm
Table travel: X = 400 mm / Y = 250 mm
Maxi height base/spindle nose: 1200 mm
Throat depth: 350 mm
With variable speed belt
Auto advances:
Fz2agah
3 speeds 0,009 mm/R-0,16 mm/R-0,28 mm/R
Rotary table around the column
With 1 cross table L 810 mm x W 320 mm
Lubricant pump
Voltage: 380 V
Width: 1100 mm
Depth: 1300 mm
Total height: 2000 mm
Weight: 850 kg
Column drilling machine WEBO type Gradua 50
Built in about 1980
Drilling capacity 50 mm
Spindle cone MK 5 - long sleeve
Throat depth 360 mm
Pinolhub 240 mm
Table size 560 x 560 mm
Column diameter 240 mm
Spindle speed 40-900 RPM 8 levels
Cf3pmpkq
Feed 0.12 - 0.19 - 0.26 - 0.4 - 0.5 - 0.76 1.10 - 1.70 mm / U 8 levels
Motor power 4 / 5,5 kW pole changing bar
Power supply 380 v, 50 Hz
-Spindle speed through the 2-speed motor and gear unit 4
-Motor speed level I and II for clockwise and counterclockw...
Offer 20359
Technical data:
- drilling capacity
Bvogakkcoa
- in steel 18 mm
- in aluminium 20 mm
- Drilling spindle holder MK 2
- drilling depth 90 mm
- projection spindle / column 215 mm
- drilling spindle speed infinitely variable 400 - 3600 rpm
- drive 400 V / 0,9 kW
- height adjustable drilling table 160 x 310 mm
- distance drilling spindle / table approx. 950 mm
- distance drilling spindle / base plate approx. 1350 mm
- Cross table make KNUTH 240 x 140 mm
- space requirement ...
COLUMN DRILLING MACHINE IBERDRILL BZ 40
TECHNICAL DATA - STANDARD
max. drilling capacity for steel (St 60) at continuous power S1 Ø 40 mm
max. drilling capacity for grey cast iron (GG 20) at continuous output S1 Ø 45 mm
max. tapping capacity for steel (St 60) at continuous power S1 M 33
max. tapping capacity for grey cast iron (GG 20) at continuous output S1 M 39
tool holder in spindle MK 4
max. spindle stroke (drilling depth) 180 mm
motor power spindle 4,12 kW
Drive V-belt
Speed adjustment step...
pillar drilling machine make BERNARDO type GB 40 Vario
Year of manufacture 2008
technical data:
drilling capacity in St 40 mm
drilling capacity in Gg 45 mm
Thread cutting M 32
spindle sleeve holder MK 4
Spindle speeds 60 - 2600 rpm.
4 automatic feeds 0,1 - 0,4 mm/rev.
throat 340 mm
quill stroke 190 mm
C7otcnr
column diameter 140 mm
table size 540 x 440 mm
drive power 2,0 kW
dimensions approx. 700 x 950 x 2340 mm
weight approx. 495 kg
with
- automatic feed
- motorized table adjustment
- cooling d...
Column drilling machine Fabr.ALZMETALL Type:AX3S Bj.1979
with 2 step motor speed control infinitely variable .
Spindle admission MK3
Drill hole in steel 30mm
Drilling stroke: 120mm
Clamping table: 400mmX400mm height adjustable
Motor stage 1: from 250-1125rpm
Motor stage 2 from 500-2250rpm
Motor speed:1425/2875rpm Motor power :1/1,3KW
Dgmtnop
Overall dimensions:LXBXH 400mmX600mmX1750mm
Weight.Approx.200kg.
Machine in good condition.
Drilling capacity in steel 30 mm
Drilling capacity in GG 40 mm
Pcxcj
Drilling spindle holder MK 4
table diameter 560 mm
speed range, 2 steps 65 - 1160 rpm
spindle throat 340 mm
feed rate 0,1 / 0,2 / 0,3 mm/rev
motor power 1,2 / 2 KW
dimensions L x W x H 560 x 1000 x 2350 mm
Machine weight approx. 550 kg
Accessories / special features:
- Automatic feeds
- Pole-changing motor for single + double speed
- Table rotatable, height adjustable
Siegfried Volz Machine Tools
Rüschebrinkstr. 151-153
D - 4...
pillar drilling machine ELHA type 35 V
year of manufacture approx. 1985
drilling capacity Ø 35 mm in steel
Ø 40 mm in cast iron
spindle mounting MK 4
throat 350 mm
pinol stroke 180 mm
table size 600 x 550 mm
column diameter 165 mm
distance table - spindle nose max. 720 mm
distance foot clamping surface - spindle nose 1240 mm
spindle speed 60 - 1070 rpm infinitely variable
feed rate 0,05 - 3,5 mm/rev infinitely variable
motor power 1,5 and 2,2 kW pole-changing
Mains connection 380 Volt, 50 Hz...
Drilling capacity in steel (ST 60): 40 mm
Tapping capacity steel E335 (St 60): M 24
Cast iron EN-GJL-200 (GG20): M 30
Short spindle: MK 3
spindle stroke: 120 mm
throat depth: 293 mm
column diameter: 115 mm
machine table, usable support: 514 x 360 mm
T-slots, number x width x distance: 2 x 14 x 224 mm
G0kpb8tew
distance spindle-table min./max.: 117/701 mm
feed: manual
Machine height without options: approx. 1840 mm
net weight: approx. 270 kg
Drive: stepless
spindle speed rpm: 160-2250
COLUMN DRILLING MACHINE IBERDRILL AZ 40
TECHNICAL DATA - STANDARD
max. drilling capacity for steel (St 60) at continuous power S1 Ø 40 mm
max. drilling capacity for grey cast iron (GG 20) at continuous output S1 Ø 45 mm
max. tapping capacity for steel (St 60) at continuous output S1 M 33
max. tapping capacity for grey cast iron (GG 20) at continuous output S1 M 39
tool holder in spindle MK 4
max. spindle stroke (drilling depth) 180 mm
motor power spindle 4,12 kW
Drive V-belt
Speed adjustment ste...
Pillar drilling machine make WEBO type GRADUA 50
technical data:
max. drilling capacity steel 50 mm
spindle stroke 240 mm
throat 390 mm
8 spindle speeds 80-1800 rpm
Pvk3ha
3 automatic feeds 0,03-0,4 mm/rev.
spindle mounting MK 4
table size 400 x 550 mm
dimensions approx. 1200 x 730 x 2600 mm
used, in good condition
Pillar drill Fabr.IBARMIA type: 40-CA
Drilling capacity in steel. 40 mm.
Spindle retainer: MK4
Spindeldrehzahle: 71-1344U/min
Baer2v2get
Feeds: 0,1/0,2/0, 3mm / min
Stroke: 210 mm
Table: 500mmX500mm turning u.Schwenkbar.
Drilling performance: steel 60, 22 mm / M18
Adjustment drilling head & table each 300 mm
Speed (stepless) 37-3600 RPM
Spindle diameter 65 mm
Overhang 300 mm
Table surface 800x390 mm
Bpbcmr7okf
Spindle feed 0.02-0.04-0.1-0.12-0.25-0.6 mm/U
Taper in spindle ACIERA attachment bracket
Stroke quill 120 mm
Dimension (WxDxH) 80x105x175 cm
Weight 900 kg
Accessories:
1 pc. drill chuck 1-13 mm
1 pc. adapter sleeve SK30/MT1
1 pc. adapter sleeve SK30/MT2
1 pc. manual in German
Column drilling machine FLOTT type M5 ST
Machine. No. 48 330 018 Year of construction 2002
continuous drilling capacity drilling machine 35 mm
continuous drilling capacity multi-spindle drilling head 14 mm
spindle receptacle MK 4 - short sleeve
Spindle adaptor multi-spindle drilling head Adjusting sleeve Ø 16 mm
Btuuguxgb8
throat 300 mm
Pinol stroke 160 mm
table size 590 x 450 mm
column diameter 125 mm
spindle speed 45 - 3200 rpm infinitely variable
motor power 1,5 and 3,0 kW
Mains connection 40...
Drill labelled steel E335 (St 60): 30 mm
Tapping
Steel E335 (St 60): M 16
Gast EN-GJL-200 (GG20): M 20
Short spindle: MK 3
Spindle hub: 140 mm
Exoffload: 293 mm
Saeculin diameter: 115 mm
Machine table, usable edition: 514 x 360 mm
T-grooves, number x width x distance: 2 x 14 x 224 mm
Distance spindle table min./max. 132/724 mm
Foram: Hand
Machine hoea with no options about: 1770 mm
3oo0zgbuj
Net weight approx: 260 kg
Propulsion: Crecess
Engine: 750/1500 U/min 750...
PILLAR DRILLING MACHINE IBERDRILL AZ 34
TECHNICAL DATA - STANDARD
max. drilling capacity for steel (St 60) at continuous power S1 Ø 34 mm
max. drilling capacity for grey cast iron (GG 20) at continuous output S1 Ø 40 mm
max. tapping capacity for steel (St 60) at continuous output S1 M 27
max. tapping capacity for grey cast iron (GG 20) at continuous output S1 M 33
tool holder in spindle MK 4
max. spindle stroke (drilling depth) 150 mm
motor power spindle 3 kW
Drive V-belt
Speed adjustment steple...
Column drilling machine
Make Ixion
type BS 23 AV
Bt7h80fzth
MK 3
throat 260 mm
table size 500 x 360 mm
10 speeds from 120 - 2160 rpm.
automatic feed : 0,1 - 0,16 - 0,25 mm/per revolution
space requirement :
height 1800 mm
width 770 mm
depth 500 mm
ALZMETALL column drilling machine AB 40/SV Manufacturer: AlzmetallTyp: AB 40 SVCondition: NEUBbohrleistung Stahl 40 mm Bohrleistung Guss 46 mm Bohrvermögen Stahl 50 mmGewindeschneiden Stahl M 30 Gewindeeschneiden Guss M 36 Kurzspindel MK 4 Ausladung 300 mm Machine table 615 x 430 mm T-slots 2 x 14 x 224 mm Distance spindle table 147/688 mm Column diameter 145 mm Spindle stroke 160 mm Feeds 0.1-0.2-0.3-0.4 mm/U Machine height 1865 mm Net weight approx.450 kg Drive infinitely variable Motor 750 / ...
pillar drilling machine make FLOTT type SB 16
machine # 251600092, year of construction 1992
technical data:
H2m3kxt
drilling capacity 16 mm
spindle mounting MK 2
6 spindle speeds 430-680-1120-1800-
2800-4500 rpm.
quill stroke 100 mm
table size 220 x 320 mm
throat 250 mm
drive power 0,75 kW
column diameter 100 mm
dimensions approx. 400 x 700 x 1800 mm
weight approx. 144 kg
used, in good condition
Hessisch Lichtenau, Germany