bore capacity in steel (diameter) 32 mm
arm length max. 1005 mm
workpiece height max. 500 mm
bore depth 200 mm
thread cutting attachment ja
spindle taper MK 3
feed 0,08; 0,12; 0,2; 0,25 m/min
surface area 1140 x 390 mm
swiveling of the radial arm 360 °
turning speed range 100 - 1400 U/min
boring chuck Schnellspannfutter 0-13
total power requirement 2,2 kW
weight of the machine ca. 1,4 t
dimensions of the machine ca. 1590 x 1420 x 1980 mm
distance between spindle cent...
bore capacity in steel (diameter) 32 mm
arm length 800 mm
table surface area 930 x 650 mm
spindle taper MK 5
spindle turning speed range 33 - 1500 U/min
drilling feeds 0,08 - 1,5 mm/U
crossrail adjustment vertical max. 550 mm
weight of the machine ca. 2,6 t
Accessories: machine vice, coolant
- thread cutting attachment -
Hydraulic drilling machine DELTECO type 257
Spindle: Ø 90 mm
Spindle exit: 160 mm
Table size: 1300 x 600 mm
Maxi distance spindle nose/table in high position: 750 mm
Mini distance spindle nose/table in low position: 400 mm
Drilling taping founction
Possibility of working at the back (see photo)
Maxi position at the back: 1400 mm
Equipped with 1 cube: L 600 x X 420 x H 300 mm
Voltage: 380 V
Width: 1400 mm
bore capacity in steel (diameter): 32 mm
arm length: 850/350 mm
cantilever adjustment vertical: 800 mm
spindle taper MT: 3
drill head horizontal traverse: 500 mm
spindle stroke: 125 mm
distance drilling head - clamping area: 0 - 880 mm
number of spindle speeds: 56 - 1400 / 8 step U/min
feed: 0,063 - 0,63 mm/U / 6 step mm/U
total power requirement: 2,2 kW
weight of the machine ca.: 1,53 t
dimension machine xH: 2,5 x 0,65 x 2,0 m
- Drill head 360° rotatable via radial scal...
INVEMA Radial Drilling Machine
Please Note: The above information has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!
Radial drilling machine make STANKOIMPORT type 2 K 52-1
Make # 176
drilling capacity in steel 25 mm
min./max. throat 300 / 800 mm
Boom adjustment vertical 625 mm
8 spindle speeds 63 - 1600 rpm
spindle mounting MK 2
workpiece height 1000 mm
quill stroke 250 mm
feeds 0,125 - 0,2 - 0,315 mm/rev
column diameter 180 mm
Clamping surface of the base plate 900 x 630 mm
distance table-UK-spindle 125 / 1000 mm
total power requirement 1,5 kW
external dimensions LxWxH: 1760 x 915 ...
KOLB radial drilling machine MK 20
with coolant device (cannot be tested)
drill holder MK 3, right-left run, table swivelling, with vice
Machine is sold as seen.
Transport costs are borne by the buyer. Loading by existing forklift
used radial drilling machine CASER F35/1000 in very good condition
drilling power: 2.5 kW
spindle speed 47,5 - 2120 rpm.
spindle diameter 65 mm
clamping surface 740x550 mm
Spindle feed automatic and manual
Tool holder MK4
drilling spindle stroke 250 mm
Dimension WxDxH: 181x86x217-287 cm
Weight 2500 kg
Portable Radial drilling machine on bed COLLET type BUV 1600
Spindle speed: 18 speeds from 14 to 710 RPM
Drilling Ø 50 mm
Arm travel: 800 mm
Column travel on bed1600 mm
Maxi height column travel:1000 mm
Spindle travel: 300 mm
Year of construction: 1976
Swivel head + arm (see photos)
Horizontally + vertically swivel head
Auto advance spindle exit
Voltage: 380 V
Dimensions (L x W x H): 3600 x 1300 x 2900 mm
Weight: approx 5 T
DESCRIPTION Radial drilling machine
Make MAS Kovosvit
Type VO 32
Machine No 1094
Year of manufacture 1990
drilling capacity in steel 60 32 mm
Drilling capacity in cast iron 45 mm
Thread cutting in steel 60 M 20
Thread cutting in cast iron M 24
Spindle mounting 4 MK
Distance spindle nose / base plate: max / min 1040 / 270 mm
Projection: max / min 1000 / 250 mm
Vertical movement of the cantilever 520 mm
Spindle stroke 250 mm
Spindle speeds in 12 steps 90 - 4500 rpm Feed rat...
The radial drilling machine is currently undergoing a general overhaul and modernization in our factory.
After the completed general overhaul and modernization, the machine meets all standards and has all the technical parameters of a comparable brand-new machine.
Max. Radius of the bore steel/cast iron (mm) - 75 / 85 mm
Max. Thread of the bore steel/cast iron - M56 / M68
Max distance between spindle and table - 2000 mm
Min. distance between spindle and table - 390 mm
Carlton radial drilling machine offered.
Stroke (x-travel): 800 mm
Speed: 15-1500 RPM
Bed: 1095 x 1350 mm
Diameter spindle: 80 mm
Included documentation and coolant pump
Dimensions: 300x115x310 cm LxWxH
Weight: ca 5500 KG
For more information call us or send an e-mail.
Radial drilling machines
drilling capacity 32 mm
throat 320 - 820 mm
spindle mounting MK 4
for drilling, reaming and thread cutting work
machine frame made of high-quality, fine-grained grey cast iron and heavily ribbed, therefore extremely low-vibration
precisely ground gear wheels for long service life and low-noise operation
clear arrangement of the electrical and mechanical switching elements on the headstock of the machine for easy operation
Height adjustment of the arm is motorized
High-speed radial drilling machines
Model: HKS 34 MG
Year of construction: 1988 - workshop checked, new painted,
RAL9016 traffic white / RAL7016 anthracite grey
Machine no.: 34 1235
- Coolant system
- Thread cutting device
- Clamping plate (670 x 500 mm) with T-slots (18 mm)
mounted at the rear of the machine stand
- Operating instructions
-used, as seen-
Radial drill press in good condition.
With motorized boom (Up / Down)
Morse taper 4
Travel on the boom: 725 mm.
Travel on spindle: 270 mm.
32 - 2500 rpm.
0.06 - 0.8 mm / rpm feed rate.
Spindle diameter: Ø65 mm.
Max height between table and spindle: 995 mm.
Total dimensions: 180 x 85 cm.
Height: 248 cm. (Transport height: 228 cm)
Radial drilling machines
Drilling capacity 40 mm
Tapping capacity, steel M 30
table clamping surface 1.200x505 mm
powerful machine, suitable for drilling, tapping, countersinking and boring
optimum clamping and machining possibilities due to large traverse paths and a large number of different machining stations
extremely stable construction ensures high accuracy and reliability
fast and precise positioning of the tool: the hydraulic clamping is released at the push of a button - the head can be...
-Drilling capacity in steel 28 mm
-Thread cutting device
-Spindle mount MT 3
-Drilling spindle stroke 160 mm
-Table dimensions 750 x 500 mm
-Projection up to approx. 620 mm
-Vertical stroke of the arms 600 mm
-Column diameter 250 mm
-Spindle speeds in 12 power levels 80-2800 RPM
-3 feeds 0.1 + 0.15 + 0.25 mm/U - spindle drive 400 V / 5,5 kW
-Coolant system - space requirement approx. B 1100 x 1550 - 2150 x T H 950 mm - weight 1200 kg
The Machineseeker Trust Seal gives buyers the opportunity to see, at a glance, whether they are dealing with a trustworthy seller.
What do we verify?
Check of trade licence or commercial register extract
Check the address of the dealer
Validation of Bank connection
Verification of accessibility to main phone number
Credit report may not contain negative criteria
Buyer complaints can lead to withdrawal of the seal
What does this mean for the seller?
After successful verification, we will include the seal in your advertisements on Machineseeker. In this way, you signal to every potential buyer the seriousness of your company, checked by an independent body. This creates buyer confidence and increases the probability of successfully selling machines. In addition, you have the option of including the Machineseeker Trust Seal on your homepage and in business letters.
Try our app for used machines now!
Machineseeker app for iPhone and Android.
All information, offers and prices on this website are subject to change and non-binding!
Designated trademarks belong to their respective holders.
Machineseeker Group GmbH Does not assume liability for the content of linked external websites.