Used bench drills with a drilling capacity over 17mm for sale (51)

Condition: good (used), Year of construction: 1986, machine/vehicle number: 5123, Offer 26251 Technical data: Drilling capacity in steel ST 60: 32 mm Drilling diameter in steel ST 60: 40 mm Long spindle, MK 3 Drilling spindle speeds, stepless: 160 - 2250 rpm Hedpfx Asz Df Shjf Seu Drilling spindle stroke: 120 mm Overhang: 293 mm Column diameter: 115 mm Machined base plate with T-slots: 400 x 400 mm Max. distance from base plate to spindle: 600 mm Emergency stop button Electric foot switch Space required: approx. W 450 x H 1250 x D 900 mm Weight: approx. 250 kg Quick-change drill chuck Table stand

Condition: like new (used), Year of construction: 2011, machine/vehicle number: MA10110002, functionality: fully functional, SPECIFICATION Drilling capacity in mild steel 18mm Motor 0.45kW 415 volt Spindle 2MT Drive Belt, stepped pulleys Spindle speeds rpm 50Hz 400-700-1200-2100-3600 Spindle travel 75mm Throat depth 185mm Column diameter 70mm Table -working surface 250 x 164mm Table – slots width & centres 13 x 125mm Hodpfezmuntex Af Seu Base – overall 240 x 360mm Max. distance chuck to table 330mm Overall height 865mm Overall width 280mm Overall depth 600mm Approx. Nett weight 77Kg Machine equipped with Chuck guard Table adjustment by rack Drill chuck

Condition: used, Year of construction: 1975, Technical details: bore capacity in steel (diameter): 32 mm throat: 230 mm bore stroke: 160 mm Hedpfsvc Aytox Af Sou spindle taper MT: 3 feed - manual: Handhebel mm revolution per minute: 100...2000 U/min headstock adjustment: 180° Grad headstock traverse: in Höhe/height/altura 350 mm clamping surface area: 1020x615 mm height over floor: 860 mm column diameter: 102 mm total power requirement: ca. 1,2 kW weight of the machine ca.: 0,5 t space requirements approx. LxWxH: L:1,2xB:0,77xH:2,26 m equipped: - toothed drill chuck up to 16mm Machine on sale as is, without test run. i.D. *

Condition: used, bore capacity in steel (diameter) 23 mm throat 220 mm bore stroke 120 mm Hsdpfx Afsyfwunj Sju Number of revolutions 25 - 3.200 U/min distance Spindlenose and center of table 275 mm table surface area 300 x 355 mm T-slots 3x T - slots distance 120 mm column diameter 110 mm weight of the machine ca. ca. 120 kg dimensions of the machine ca. 0,8 x 1,0 x 1,9 m Table Drilling Machine IXION - BT 23 ST - incl. base cabinet

Condition: ready for operation (used), H. Hartkämper Coordinate Drilling Machine Hjdpfx Aoztc A Eof Sju -Drive: 400 V three-phase -Drilling capacity in steel: approx. 16–20 mm -Spindle mount: MK2 / drill chuck B16 -Speed range: approx. 250–3,000 rpm (multi-stage) -Quill stroke: approx. 80–100 mm -Table size: approx. 1,300 × 600 mm -Travel in X: approx. 350–450 mm -Travel in Y: approx. 180–250 mm -Base: integrated steel frame with storage compartments Dimensions: L x W x H 1.4 x 0.9 x 1.5 meters / Weight 350 kg Errors and omissions excepted.

Condition: used, total width: 800 mm, total length: 1,250 mm, total height: 1,600 mm, Empty weight: 150 kg Tapping machine, drilling and tapping - Documentation available: No - CE certificate present: No - Serial number: 132832 - Drive system: Conventional - Power [kW]: 0.55 - Table length [mm]: 290 - Table width [mm]: 225 - Min. spindle speed [rpm]: 320 - Max. spindle speed [rpm]: 1600 Hodpfx Afozry H Sj Sju - Transport dimensions: 1250mm x 800mm x 1600mm (l x w x h) - Transport weight [kg]: 150kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Storage location: 3110 Manufacturer: MAXION Year of manufacture: 2006 Machine number: 186477 Type / Model: BT18STP Drilling capacity: 30 mm Threading capacity: M25 Spindle mount: MK 2 Speed range: 120 to 2,160 rpm, continuously variable Overhang: 230 mm Vertical adjustment: 300 mm Table: 600 x 600 mm Clamping area: 300 x 330 mm Stroke: 120 mm Distance table - spindle nose: 40 to 310 mm Vertical adjustment: 270 mm Total power consumption: 1.3 kW Accessories / Equipment: Belt adjustment Condition: good Footprint: 800 x 800 mm Weight: 160 kg Dimensions with table: 600 x 600 x 1,200 mm Hjdpfx Aozcuypsf Seu

Condition: used, Year of construction: 1984, machine/vehicle number: 84043, Order No. 20218 Technical Specifications: - Drilling capacity in wood: 40 mm - Drilling capacity in steel: 18 mm - Drill spindle mount: MT 2 - Spindle stroke: 120 mm - Drill spindle speeds continuously adjustable in steps: 60 - 2840 rpm - Max. distance between table and drill spindle: 600 mm - Boom/unit tiltable left and right by 45° each Hjdpfewf Iqnox Af Sou - Boom/unit pivotable left and right - Table size: 450 x 450 mm - Drive: 400 V / 0.33 / 0.55 kW - Space required: approx. W 500 x H 1870 x D 1200 mm - Weight: approx. 150 kg

Condition: used, Technical details: bore capacity in steel (diameter): 2-20 mm throat: 210 mm bore stroke: 100 mm Distance spindle/table max.: 450 mm range of revolution per miute: I : 450-1800 + II: 900-3550 / 4step U/min spindle taper MT: 2 table surface area: 340x280 mm total power requirement: 1,1 kW machine weight ab.: 165 kg transport dimensions LxWxH: 0,6 x 0,5 x 1,28 m Hodpjzgaiijfx Af Sou Robust industrial drilling machine manufactured in the former East Germany by the "Fritz Heckert" Machine Tool Combine. Equipped with a 1.1 kW motor, 380 V three-phase power supply, and a machine weight of approximately 165 kg. Precision machine suitable for drilling, countersinking, and light reaming operations. Solid cast-iron construction, ideal for toolmaking, workshops, maintenance departments, and training facilities. *

Condition: good (used), Year of construction: 1983, machine/vehicle number: 7346, Offer 24016 Technical data: - Drilling capacity 22 mm - Drill spindle holder MK 2 - Drill spindle stroke 100 mm - 4 drill spindle speeds 355 - 710 - 1400 - 2800 rpm - throat depth 210 mm - Machine table 480 x 420 mm Hodpfxsrwmbge Af Ssu - min. /max. distance drill spindle / table approx. 190 / 340 mm - Drive 400 V / 1.1 kW - Space requirement approx. W 450 x H 1200 x D 700 mm - Weight approx. 170 kg

Condition: good (used), Year of construction: 1980, machine/vehicle number: 334, Offer 19194 Technical data: - Drilling capacity 22 mm - Drill spindle holder MK 2 - Drill spindle stroke 100 mm - 4 drill spindle speeds 355 - 710 - 1400 - 2800 rpm - Right - left rotation - Projection 210 mm - Machine table 480 x 420 mm - Distance machined base plate / drill spindle 190 / 340 mm - Drive 400 V / 0.8 / 1.0 kW - Space requirement W 450 x H 1200 x D 700 mm - Weight approx. 170 kg Hedpferwl Nnex Af Ssu

Condition: good (used), Year of construction: 1983, machine/vehicle number: 5763, Offer 24590 Technical data: - Drilling capacity 22 mm - Drill spindle mount MK 2 - Drill spindle stroke 100 mm - 4 drill spindle speeds 355 – 710 – 1400 - 2800 rpm - Throat depth 210 mm Hjdpevxg Ruefx Af Seu - Machine table 480 x 420 mm - Min. / max. distance drill spindle / table approx. 190 / 340 mm - Drive 400 V / 1.1 kW - Space requirement approx. W 450 x H 1200 x D 700 mm - Weight approx. 170 kg

Condition: used, Year of construction: 2014, throat 180 mm quill stroke 80 mm continious capacity 20 spindle taper MK 2 table-size 280 x 245 mm Hsdpfxsxbtrgo Af Sju height of the machine ca. 1000 m column diameter 73 mm distance spindle /table max. 425 mm dimensions ca. 615 x 330 x 1015 mm weight ca. 60 kg incl. vice HM Müller HT100P

Condition: good (used), Year of construction: 2002, machine/vehicle number: 025137, Offer 24190 Technical specifications: - Drilling capacity: 25 mm - Drill spindle taper: MK 3 - Drill spindle stroke: 140 mm - 8 spindle speeds: 100 - 2900 rpm - Min./max. distance spindle/table: 110 / 405 mm Hsdpfxewyl H Ne Af Seu - Work light - Quick-action drill chuck - Coolant device - Machine vice - Machine base - Drive: 400 V / 0.75 kW - Required space (W x H x D): 400 x 1250 x 600 mm - Weight approx.: 200 kg

Condition: used, From business closure: Genko ATB 20 Speed range 30-2800 rpm Right & left rotation MK2 taper Quill stroke 65 mm Max. throat 530 mm Max. distance between spindle and table 610 mm 380 volt Albrecht quick-action chuck 0-10 mm Tilting drill head Table clamping surface 400x660 mm Weight approx. 200 kg Hsdpfx Aeyhy Rzof Seu

Year of construction: 1985, condition: good (used), Offer 22428 Technical data: - Drilling capacity in steel ST 60: 18 mm - Drill spindle mounting: MK 2 - Drill spindle stroke: 120 mm - 10 drill spindle speeds: 90 - 1450 rpm - Overhang: 280 mm - Table with 2 T-slots: 350 x 400 mm - Max. distance table - drill spindle: 410 mm - Drilling machine with height adjustment via rack and pinion with hand crank - Lighting - Drive: 400 V / 1.5 kW - Table base - Space requirement: approx. W 500 x H 2000 x D 850 mm - Weight: approx. 350 kg - Includes: Hsdpfx Afsimbmcj Sju - Machine vise - Quick-change drill chuck - 10 pcs. HSS drill bits 8 - 20 mm

Condition: good (used), Threading machine, bench drill, pillar drill Hjdpfx Asyvfzwof Sju Manufacturer: Hagen

Condition: good (used), Bench drill, stand drill, pillar drill, pillar drill -Manufacturer: Flott, bench drill type M2 ST -Clamping table: 260 x 200 mm -Travel: 310 mm -Spindle holder: MK2 with drill chuck 3-16 mm -Projection: 240 mm -Speeds: 400 - 3500 rpm -Pillar: diameter 82 mm -Spindle stroke: 100 mm, depth stroke with fine adjustment -Motor power: 0.75 kW -Voltage: 400V -Dimensions: 750/340/H1100 mm -Weight: 135 kg Hsdpfemzkg Rox Af Sju

Condition: new, 18 mm M 12 M 14 MK 2 225-4.300 U/min. spindle stroke 80 mm throat 190 mm column diameter 65 mm 300x240 mm 2 x 12 x 80 mm 75/357 mm 300x240 mm 2 x 12 x 80 mm 437/437 mm Hedpezz Aihsfx Af Sju feed von Hand Handkurbel total power requirement 0,37/0,55 kW Machine height 840 mm

Year of construction: 1990, condition: good (used), machine/vehicle number: 0125749, Technical data: - Drilling capacity approx. 30 mm Hsdpfx Aed Ingfsf Sju - Drill spindle mount MK 3 - Drill spindle speeds in 2 stages, stepless 80 - 1400 rpm - Table surface 390 x 420 mm - Drilling unit height-adjustable by hand crank - Min. / max. distance table / drill spindle 220 / 580 mm - Drill spindle stroke 150 mm - Drill spindle overhang 280 mm - Drive 400 V / 1.3 / 2.3 kW - Space requirement approx. W 480 x H 880 - H 1200 x D 1050 mm - Weight approx. 250 kg - Table base with storage space W 600 x H 910 x D 800 mm - Weight 200 kg

Condition: ready for operation (used), Ixion BT 23 FST Pillar Drilling Machine / Drill Press Speed range: 120 - 1080 rpm / 240 - 2160 rpm Spindle taper: MT 3 Quill stroke: 120 mm Drilling capacity (steel): 23 mm Throat depth: 260 mm Hsdpeyybpgjfx Af Seu Dimensions: approx. 1000 mm x 1000 mm x 1950 mm Weight: approx. 430 kg You are welcome to arrange an on-site inspection. We can organize affordable shipping for you! You will receive a proper invoice. For international customers, we can also provide a net (tax-free) invoice, provided a valid VAT ID is supplied. Subject to prior sale. Visit our shop and check out our other listings. Company names and trademarks mentioned are property of their respective owners and are used only for identification and description of the products. Deviations from technical specifications as well as errors in the item description may occur and are subject to change.

Condition: excellent (used), Drilling capacity -20 mm Spindle taper FEHLMANN Spindle speeds 50-6300 rpm Throat 276 mm Cross table 530 x 255 mm Digital read-out Hjdpsuy Sazjfx Af Sju Accessories MARCELS MASCHINEN CH

Condition: used, machine/vehicle number: 242350148, -WT 106- Hodslf Evcepfx Af Sou Offered here is a table drilling machine of the company Flott of the type TB23L. The table drilling machine stands on a special lifting table (no original lifting table). Technical data: - 6-fold speed adjustment (manual via belt pulley). - MK2 receptacle

Condition: excellent (used), Working travels 450 x 260 x 560 mm Spindle stroke 120 mm cross table 770 x 320 mm Drilling capacity 25 mm Hjdpfx Afetpgcns Sju Spindle speeds 55 - 9200 Rpm With DRO With Threading attachement Misc accessories MARCELS MASCHINEN CH

Condition: excellent (used), incl. rollable table 380 VAC Drilling capacity in steel: max. approx. Ø 18 mm Hedpfxeryn Sbs Af Ssu Spindle speed 1-stage: 240 / 420 / 675 / 1100 / 1900 rpm Spindle speed 2-stage: 480 / 840 / 1350 / 2200 / 3800 rpm Projection: 215 mm Tool holder: MK 2 Quill stroke: 90 mm Table clamping surface: 220 x 285 mm Cross table travel X / Y: 160 x 180 mm Power requirement: 0.72 kW Weight: approx. 85 kg Dimensions W x D x H: approx. 800 x 900 x 1740 mm