Deep hole drilling machine

TBT M 500-6-1200

Year of construction: 2021, condition: new, type: gas-fired with central recuperator max. temperature: 1300°C max. furnace output: approx. 700 kg/h clear door opening (w x h): 600 x 400 mm Ihodpfx Aheg E S Ino Net number of burners: 6 number of control areas: 3 heating capacity: 720 kW el. total connected load: approx. 15 kVA PLC: Siemens S7

Condition: excellent (used), Desktop Metal 3D Printer Complete System Here we offer you Desktop Metal 3D printer complete system. Desktop Metal 3D printer studio system Complete system: 3D printer + debinding machine + sintering furnace Desktop Metal The three-part solution includes 3D printer, debinder and furnace Manufacturer Desktop Metal Model Desktop Metal Studio System Operating condition Used (Good) Year of manufacture 2019 Desktop Metal Studio System Includes: 1.1 Desktop Metal Studio 3D Printer Bound Metal Deposition (BMD) Technology. Features: Printed materials metal Technology FDM Use Industry Other features Office X-stroke 30 cm (12 in) Y-stroke 20 cm (8 in) Z-stroke 20 cm (8 in) Iedpfx Aok Hz Nqsh Neht Description: Unlike laser-based systems that selectively melt metal powders, the printer extrudes bonded metal rods - similar to an FDM printer. This eliminates the safety requirements often associated with metal 3D printing, and it enables new features such as the use of closed-cell fills for lightweight strengths. 1.2 Desktop Metal Studio debinder (delamination machine) fully automatic debinding Cleaning tank: 17.4 L (in process) / 22.5 L (stock) Description: The debinder prepares green parts for sintering by dissolving the primary binder. With a low emission design, it requires no external ventilation and is safe for an office environment. Automatic liquid distillation and recycling means no need to refill between cycles. 1.3 Desktop Metal Studio Sintering Furnace hybrid technology (microwaves & conventional heating elements) Installation space 305x205x205mm Carbon housing Gas supply: 2 x 900 L gas cylinders Heating power: 20 kW Features: Function Sinter Configuration Chamber Heat source gas Other features High temperature, automatic Maximum temperature 1,400 °C (2,552 °F) Description: Fully automated and sized to fit through an office door, the furnace delivers industrial-grade sintering in an office-friendly package. Built-in temperature profiles matched to each design and material provide uniform heating and cooling without the residual stresses associated with laser-based systems. Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: used, Year of construction: 2008, Article: Vertical turning and grinding centre Manufacturer: EMAG Type: VSC 250 DS Yob: 2008 Control: SIEMENS 840D Grinding spindle speed: 30,000 rpm Rotation spindle speed: 3,000 rpm Tool places turret: 12 Cooler for spindle and machine bed cooling Cooling lubricant - lifting station (no independent cooling lubricant supply) Chip conveyor Parts handling Air through the spindle Two clamping circuits through the spindle (air and oil) Unfortunately, the grinding spindle is defective. However, this can be overhauled in a spindle factory. Otherwise the machine is in a very good condition and fully functional. Please, contact us for getting more information and pictures on mail(at) or * Iodpfx Ahjia Rtdo Njht

Condition: used, Year of construction: 2008, Used Combiblock Sidel SBO 20 Universal 36000 bph The Used Sidel SBO 20 Universal Combiblock 36000 bph is an integrated bottling system, combining a blower and a filler/capper in a single unit. This machine is designed for the production of PET bottles, with a production capacity of up to 36,000 bottles per hour. The Sidel SBO 20 Universal blower features 20 cavities, allowing efficient and continuous production. The system includes a preform feeder with a hopper and a preform unscrambler, ensuring a constant flow of material in the production process. The Europa WM 60 filler/capper is integrated into the Combi block, optimizing space and reducing transfer times between the blowing and filling stages. This compact design improves operational efficiency and minimizes the risk of contamination. The system has been used for bottling natural mineral water in 0.5-liter formats, with a 26.6 mm Alaska-type neck customization. The machine pitch is 113 mm, adapting to specific production needs. Iodpfx Asvgu D Ssh Noht Currently, the machine is in storage, ready to be installed and put into operation in a new production facility. A complete inspection is recommended before start-up to ensure optimal performance. The required power supply is 400 V at 50 Hz, standard in many industrial plants. The immediate availability of the Combi system represents an opportunity for companies looking to quickly increase their production capacity.   Advantages of the Combi system over a traditional system The Combi system, like the Used Sidel SBO 20 Universal Combiblock 36000 bph, offers numerous advantages over traditional systems, which use separate machines for blowing, filling, and capping. Firstly, the compact design drastically reduces the space occupied in the plant, allowing companies to optimize available space and, in many cases, reduce infrastructure costs. Moreover, the Combi system eliminates the need for intermediate conveyors and accumulation zones between stages. This layout simplification reduces maintenance costs, lowers the risk of jams or breakdowns along the production flow, and improves the overall line efficiency. The absence of intermediate steps also reduces the possibility of contamination, a priority especially in the food and beverage sector. The integrated process between blowing, filling, and capping shortens production times as the operations proceed continuously and without interruptions. This contributes to increasing the overall line speed and hourly production capacity. Higher efficiency translates not only into increased productivity but also into a significant reduction in energy consumption and operating costs. Additionally, the Combi system requires fewer personnel for line management and supervision, as a single control unit allows all operations to be monitored from a centralized interface. This simplifies operational procedures and makes quality control easier throughout the process.

Condition: good (used), max. wheel diameter 180 mm gear width 58 mm max. module 4 min. module 0,5 strokes per minute 200 - 710 total power requirement 3 kW weight of the machine ca. 3 t Very good condition, change gears,... Iedpeuayw Ssfx Ah Njht Year of construction: Approx. 1964

Condition: excellent (used), max. wheel diameter 300 / 400 mm gear width 76 mm max. module 6 min. module 0,5 Control BWO CNC 921 adjustment of stroke position 94 mm/Hub stroke 82 mm no. of strokes 75 - 1000 Hub/min number of teeth 5 - 200 taper of shaper cutter SK 45 table diameter 400 mm total power requirement 50 kW weight of the machine ca. 7,5 t dimensions of the machine ca. 5,0 x 3,8 x 3,4 m Iodpfsuwwlqox Ah Noht Machine in top condition.

Condition: used, Year of construction: 2014, max. turning diameter 160 mm max. turning height 150 mm max. workpiece diameter 100 mm max. workpiece height 150 mm max. turning speeds 6.000 U/min travel -x axis 700 mm travel -z axis 375 mm Ijdeqvd Iqspfx Ah Nsht c-axis 360 ° control FANUC Vertical Turning Machine | EMAG - VL2 equipped with a workpiece conveyor belt. The machine is in very good condition. Please note that the technical details were added from comparable machines. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VL-2 | VL 2

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, 🚨 FOR SALE: 2x Kardex XP500 Machines – Top Condition! 🚨 For sale for removal. We are building a new warehouse and do not require these units. In good condition, recently serviced, well maintained throughout the time we have owned them. Price is per unit, negotiable. Shelves can be easily reconfigured to accommodate different product types / sizes. Bins can be sold with machines if desired. Machines are currently configured for dual tray presentation. Also includes 10-bay Kardex SortBench. Details: Model: Kardex XP500 Quantity Available: 2 units Condition: Well-maintained and fully operational Key Features: High-density storage to maximize space utilization Fast and reliable picking system for enhanced productivity Built for heavy-duty industrial applications Ergonomic design to improve workplace safety Energy-efficient operation Iedpfevuvbzjx Ah Nsht Why Kardex XP500? These machines are perfect for businesses looking to improve efficiency, save floor space, and boost order-picking accuracy. Location: The units are currently stored in Wanganui, New Zealand.

Condition: used, Year of construction: 2016, cutting diameter 430 mm saw band length 6830 mm cutting range 430 x 430 mm control Siemens Simatic HMI cutting speed 80 m/min Iodpfx Aexb Edzeh Noht height of material-table 700 mm dimensions of the machine ca. 5,36 x 6,83 x 2,41 m total power requirement 25 kW weight of the machine ca. 4920 kg Equipment/accessories: - Infinitely variable cutting feed rate - Pump capacity 75 l/min - Roller conveyor - Chip conveyor - Technical documentation

Condition: like new (used), Year of construction: 2017, max. wheel diameter 100 mm gear width 26 mm max. module 31 min. module 0,1 Control Siemens 840 D SL Number of working hours 9598 h total power requirement 45 kW weight of the machine ca. 7 t dimensions of the machine ca. 4x3x2,5 m Gleason 100S gear shaping machine for the production of internally and externally toothed cylindrical gears and other cylindrical workpiece circumference regularly occurring profiles and moulds as well as for the production of profiles using the single part process. Technical data: Nominal workpiece diameter 100 mm Largest circumferential diameter 150 mm Machine nominal module approx. 3 mm (Guide value depending on the respective machining task.) Shaping spindle stroke speed range 0 - 3,000 1/min Stroke position adjustment range (manual) 20 mm Largest toothing width 26 mm Smallest pitch height of the hydrostatic inclined guide 400 mm Smallest/largest distance between tool axis - 20/+ 180 mm and workpiece axis Isdpfxov Ehbbe Ah Neht Stand inclination range (manual) - 1/+ 11° Tool holder (manual clamping) HSK-D63 (hollow shank taper according to DIN 69063) Weight of the machine approx. 7,000 kg with robot cell