Used Drilling centers for sale (9)

Condition: used, Rise and Fall Table: 22 x 30 Daylight between table top and spindle: 28″ Daylight between base and spindle:46″ Spindle Taper: No. 3 morse Spindle Speeds: 100 to 1500 rpm Cgslq Stjwga A Se H Hst Spindle Feeds: 0.005 to 0.010 inches per rev Spindle Travel: 7″ Complete with coolant and lovo light. Dimensions: L to R 5ft – Front to Back 3ft – Height 8ft Weight: Approx 1.25 tons

Condition: used, Year of construction: 2008, Used CMA drilling center Type: TRD 40 CN 9000 Cgjlq St Hswc Ndwj Hjt Table length: 9000 mm Maximum capacity: 40 mm Automatic tool changer Year of manufacture: 2008

Condition: used, Year of construction: 2008, Technical details: bore capacity in steel (diameter): 100 mm max. pitch circle: 7000 mm number of spindles: 2 bore spindle turning speed range: 1 - 3000 U/min high speed spindle taper ISO: 50 bore slide stroke: 900 mm feed speeds: 1 - 6000 mm/min max. workpiece weight: 18000 kg total power requirement: 125 kW dimensions of the machine ca.: 13 x 11 x 5,1 m with CNC SIEMENS 840 D Workpiece clamping up to dia. 7000 mm The machine is equipped with 2 drilling spindle supports and through spindle coolant (50 bar)both supports can drill simultaneously. Spindle taper SK 50, 2 stages 1 -600 rpm 1650 Nm and 1 - 3000 rpm. 300 Nm Chip conveyor and coolant device Celq St Hsvb Drhe Hogt *

Condition: ready for operation (used), For sale is the Weyrach CNC drilling center with a Siemens Sinumerik 805 control system. The machine is in working order. The machine has been inspected and tested for functionality (see service report). Drive and control components are available upon request from Allemdninger and can also be repaired and replaced if necessary. Colq Ssuphy Iot H Hsgt Weight approx. 5-6 tons Machining area approx. 800 x 5000 mm Machine dimensions: approx. 6500 x 1400 x 2500 mm Sold without warranty, ex works, duty unpaid. SPECIAL PRICE €5,550 plus VAT

Condition: good (used), Year of construction: 2017, operating hours: 4,000 h, Functionality: fully functional, travel distance X-axis: 7,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, drill diameter: 40 mm, Erlo TH40 drilling tapping center in very good condition Machine can be seen under power untill february 12 Capacity drilling 40 mm Capacity tapping M24 Spindle speed range 40 - 4000 Spindle taper ISO40 Cgjlq Stjvwdbzs H Hot X-Axis Movement 7000 mm Y-Axis Movement 600 mm Z-Axis Movement 500 mm Distance spindle table 130-730 mm Controller Mitsubishi M700V/M70v Series Toolchanger 16 pieces Chip conveyor Coolant equipment Measurements width 3813 mm Measurements depth 12593 mm Measurements height 3081 mm Machine weight 10000 kg

Condition: new, Year of construction: 2024, travel distance Y-axis: 600 mm, travel distance Z-axis: 450 mm, - Simple graphic programming, including GoTo function in manual mode - Machining lengths from 3000 - 16500mm, depending on version - Free programming in DIN/ISO (G commands) - 2-axis interpolation for X/Y-axis, including arcs - 3-axis linear interpolation (X/Y/Z) - 3-axis interpolation (X/Y/Z) for helical milling and thread milling - Rapid traverse X-axis = 30 m/min., Y-axis = 25 m/min. Main spindle BT 40 - 5 bearings, diameter 110/60 mm (3x angular contact ball bearings 7212, 2x deep groove ball bearings 6212) - Suitable for both high axial and radial loads = drilling and milling Colqsrb Afao St H Hsgt - Maximum tool length : 290 mm - Maximum tool diameter : 88 mm Guide X-axis - 2 pieces 45 mm linear guides with 2 full ball bearing carriages each X-axis drive - helical precision rack, travel 3,000 to 16,500 mm Y-axis guide - 2 35 mm linear guides, each with 2 fully spherical carriages Y-axis drive - Ball screw diameter 25 mm, travel 600 mm Z-axis guide - 2 35 mm linear guides, each with 2 fully spherical carriages Z-axis drive - Ball screw diameter 32 mm, travel 450 mm Standard version Automatic tool changer with 10 positions, mounted in the machine column

Year of construction: 2000, Condition: good (used), Weight: 4600 kg Dimensions LBH: 4350 x 1070 x 2690 mm Saw blade dimensions: 8250 x 54 x 1.6 mm Fright basis: EXW with disassembling Price: on demand The 2000 Kaltenbach KBS 1001 DG band saw is a semi-automatic, high-performance band saw for cutting and drilling profiles. The Kaltenbach band saw has a two-metal saw blade M42 measuring 8250 mm x 54 mm x 1.6 mm. The motor of the saw is frequency controlled and has a driving power of 7.5 kW. The cutting speed is continuously adjustable between 16 - 100 m / min. -Working height is 450 mm, working width 1000mm. -drill diameter:10- 40 mm -material dimension max: 1000mmx450mm -material dimension min:65mmx65mm -3 drilling axes, one vertical and one horizontal Celq Stshkhume H Hogt -drill feed rate of 20-200mm/min -5 tool changer position per axis with an iso 40 tool holder The machine can transmit data in different ways: 1. The operator is programmed directly on the control panel. 2. The data is entered into the job preparation via computer and then imported as a CSV file. Data transfer takes place via a floppy disk or network. 3. Data are entered using CAD programs. DSTV data is imported via a floppy disk or network.

Condition: used, TECHNICAL DETAILS * Spindle speeds : 200-20000 [rpm] * Travel : 38 [mm] Colq St Hjuhab Hj Hogt - Distance table/spindle axis : 89 [mm] - Table dimensions : 182 x 300 [mm] - Machine height : 342 [mm] EQUIPMENT - Collets set

Condition: used, TECHNICAL DETAILS Cgolq Ssuhabyjt H Hot - dimensions : 1350 x 1050 x 850 [mm] - weight : 145 [kg]