Used Jig boring machines for sale (23)

Condition: used, Year of construction: 1991, spindle diameter 95 mm x-travel 650 mm distance between columns 750 mm Iswdcpu Control TNC 426 / 430 total power requirement 5 kW weight of the machine ca. 5 t dimensions of the machine ca. 4,5 x 3 x 3 m No. 5265 CNC coordinate boring machine SIP - Hauser MP 44 Working area: 650 x 450 x 500 + 160 Drive: 5 kW Control: TNC 426 / 430 Table 730 x 630 mm Electronic handwheel documentation Spindle SK 40 Speed range approx. 25 - 4,000 min-1 RETROFIT with TNC 426/430 in 2004 3600 switch-on hours / 900 program hours Space requirement approx. 4.5 x 3 x 3 m Transport dimensions approx. 4 loading meters / height 2.60 m Weight approx. 4.5-5 tons

Condition: good (used), spindle diameter 105 mm x 600 mm-TRAVEL y-travel 400 mm spindle throat 475 mm Udrast7Kh2 Spindle speed - infinitely variable 70-2000 U / min table surface 800 x 400 mm Automatic spindle movement weight of the machine approximately 2.5 t

Condition: used, Year of construction: 1976, Technical data: Tool holder: MK 4 Drilling capacity: 40 mm Speed range: 56 - 1250 1/min Spindle stroke: 240 mm Feed rates: 0.06 - 0.84 mm/rev Table size: 1040 x 380 mm Projection: 360 mm Column diameter: 240 mm Motor power: 6.5 kW Connection: 400 V Weight, approx.: 2300 kg Dimensions (WxDxH), approx.: 1260 x 1806 x 2820 mm Features: - Feed device Cn39Zu883K - Drilling depth stop - Coolant foot - Emergency stop button

Condition: used, Double column coordinate boring machine CNC Manufacturer: Mikromat WMW Type: CBKoZ 1400x2240/2 Control: Siemens 840D (installation ca.1997) Space requirement: 7000 x 6500 x 5300 mm (LxWxH) Weight: 22.500 kg Dpr3F2 incl. - illustrated tool holders - extensive documentation. See attachments for further data. The machine can be tested / demonstrated under power on site. Freight basis: Ex site, without dismantling The buyer must dismantle and load the machine himself. A 10to. Overhead crane is available with which the machine was assembled at the time. Further assistance and the use of a forklift truck may be possible by arrangement. All information without guarantee. Subject to prior sale. The object of purchase is sold under exclusion of any warranty. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of obligations by the seller or for any injury to life, limb or health.

Condition: good (used), Year of construction: 2006, CNC Double Column Coordinate Boring and Milling Machine with independent NC Controlled Deep Hole Drilling Unit Kolb KBN G 120 Year of manufacture 1984 / Retrofitted with Heidenhain TNC 426 in 2006 Table size 2200 x 3240 mm Table load max. 14 t Table longitudinal travel X 3000 mm Main spindle cross travel Y 2180 mm Deep hole drilling support cross travel A - 2000 mm Spindle vertical travel Z 500 mm Distance between the columns 2750 mm; Spindle to table 100 - 1300 mm; Spindle diameter 224 mm Spindle drive motor rating 46 KW Spindle speeds 14 - 1400 rpm Spindle taper ISO 50 Drilling in steel ST60 : 100 mm diameter; Boring to 300 mm; Threading to M 125 x 3; Milling capacity 730 cm³/min.; Second support for Deep Hole Drilling Spindle speeds for BTA and ELB boring 315 - 3150 rpm G0Xee227 High pressure cutting oil delivery to spindle Chip- and oil collection and separation via Centrifuge. Very good condition Proposal number V(B)-5234

Condition: good (used), Year of construction: 1992, Machine/vehicle number: 972-051, Offer 24324 Technical data: - max. workpiece diameter round 80 mm - max. workpiece diameter square 60 mm Ci2Zguzcnm - Spindle stroke 80 mm - Spindle with adjustable bearing - Clamping unit with self-centering vice - Spindle drive 400 V / 1.8 kW - Space requirement approx. W 1700 x H 1350 x D 650 mm - Weight approx. 600 kg

Condition: used, Year of construction: 2000, spindle diameter - mm x-travel 1250 mm y-travel 630 mm Control Heidenhain TNC 426 / 430 total power requirement 48 kW Cyc8Txknmk weight of the machine ca. 12 t dimensions of the machine ca. ca. 5 x 6 x 4 m m CNC jig boring machine / vertical machining centre overhauled in 2000 Spindle ISO 50, speed range 30-3000 min-1 max. torque 522 Nm feeds 3-2000 mm, rapid traverse 10 m/min max. distance spindle nose - table surface 725 mm Projection spindle centre - stand 800 mm. Space requirement approx. 5 x 5 m, Weight approx. 12 tonnes The machine was completely overhauled and modernised in 2000 with digital drives and drives and Heidenhain control Fixed table 1200 x 710 36-fold tool changer, coolant system, the pictured magnetic clamping table is not included in the scope of delivery ! - Working area: 1250 x 630 x 560 Drive: 44 kW Control: Heidenhain TNC 426 PB

Condition: used, Year of construction: 1999, x-travel 2000 mm y-travel 1000 mm z-travel 800 mm Control Fanuc 18 M total power requirement kW Dpgx0X weight of the machine ca. t dimensions of the machine ca. m

Condition: like new (used), Year of construction: 2016, Functionality: fully functional, Travel distance X-axis: 6,000 mm, Travel distance Y-axis: 300 mm, Travel distance Z-axis: 300 mm, Spindle speed (max.): 3,000 rpm, Total height: 2,750 mm, Total length: 7,150 mm, Total width: 1,903 mm, Tool mount: 3 mm, Bomar drilling rig Mounting MK3 6000x300 mm Max 28 mm drill Threaded shank M16 Weight 2800 KG Year of construction 2016 Cd89Hxqpzu

Condition: used, Year of construction: 2007, x-travel 6.000 mm y-travel 650 mm z-travel 400 mm spindle diameter MAS-403-BT40 bore capacity in steel (diameter) 32.0 mm thread cutting attachment 20 M turning speeds 50 - 3.000 U/min table: 6000 x 600 mm table height 920 mm Control OMRON CNC distance spindle /table 260 - 660 mm table load 1000 kg/m total power requirement 8.9 kW weight of the machine ca. 5250 kg. dimensions of the machine ca. 7500 x 2200 x 2200 mm Furnishing : - Welded monoblock steel frame with high rigidity - Modular table made of cast iron with four T18 grooves - 8.4" color touchscreen CNC control - The machine moves via linear guides along all axes - is driven by servo motors (programmable). Dpc0W9 - Spindle rotation driven by servo motor (programmable) - Spindle BT40 with automatic clamping - External coolant system: pump and tank - automatic tool calibrator CNC OMRON color touch screen control: - Memory up to 999 programs - Programming of coordinates via 3 different menus: * Single hole (random pattern) * Hole grid (single or multi-line) * Flange * 50 programmable zero points - CNC control of all axes (X,Y,Z) - Axis (Z): * Different speeds & workflows programmable * Plate drilling cycle * Drilling cycle for profiles * Thermal drilling cycle * small milling cycle (linear and interpolated X/Y) - Programming ISO standard * Special accessories included: - 4x NEW CMA pneumatic vice * for clamping small, narrow parts as well as large, long parts. * Quick adjustment for the wingspan * Jaw width .. 100 mm * Clamping range (span)..590/600 mm * Support height base/step jaw .. 38/124 mm * Machine link: mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008- 912404

Condition: good (used), Year of construction: 1966, Control: Heidenhain TNC 360 (1992) Table size: 1000 x 1000 mm Table size with front extension: 1345 x 1000 mm Table load max.: 2000 kg Distance spindle centre to column min/max.: 270 ~ 1270 mm Distance spindle nose to table min/max.: 0 – 1100 mm Distance between the upright columns: 1855 mm Table longitudinal travel : 1400 mm Boring ram carriage cross travel: 900 mm Crossrail vertical travel: 850 mm Boring spindle travel: 370 mm Spindle motor rating: 6 KW Spindle speed range: 30 – 1500 rpm Boring spindle diameter: 82 mm Spindle taper: MK 5 Borer diameter: 2 – 70 mm B0Seh Boring tool diameter: 17 - 450 mm Boring diameter in solid ST 60: 45 mm Boring diameter in solid Cast iron: 70 mm Equipped with: Tooling; Accessories Machine overhauled and retrofitted in 1992 !

Condition: used, Manual and hydraulic table movement, for sale due to disuse Dpdj3T

Condition: used, Machine/vehicle number: 52 / 519, spindle diameter:90 mm x-travel:700 mm distance between columns:900 mm size of table:770 x 900 mm x-Travel:700 mm y-travel:500 mm Inkryjp z-travel:1100 mm feed range - table:15 - 280 mm/min rapid traverse Z-axis:530 m/min spindle bore diameter / taper:MT4 (Morse) mm spindle bore diameter:max. 230 mm spindle stroke - max.:170 mm spindle speeds low range:10 U/min spindle speed high range:2000 U/min vertical feeds of spindle head::0.02 - 0,2 mm/r feed steps:6 Main spindle capacity:3 kW total power requirement:4,2 kW weight of the machine ca.:4 t dimensions of the machine ca.:1,9 x 2,2 x 2,4 m Hauser (SIP) High Precision Co-ordinated Jig Boring Machine, Model - M5 Douple Column Design Boring machine Large table (900 x 770 mm) for bulky Objects. All Axis are equipped with Fine Dial for High Presion Boring. A Complete Accesseries and tools are Avilable with the machine ( Drill Bits, Drill Chucks, Multiple Boring heads, Boring Inserts and Bits, Small and large rotary index table for small and big loads).

Condition: used, Year of construction: 1996, spindle diameter 60 mm x-travel max. 1000 - min. 100 mm y-travel max. 1000 - min. 100 mm bore capacity in steel max. 40 mm thread capacity max. M24 Thickness max. 60 - min. 5 mm spindle turning speed - stepless einstellbar 1 - 1.000 U/min feed stepless einstellbar, Eilgang 1 - mm/min feed stepless einstellbar, Arbeitsgang mm/min feed power 16 KN tool taper SK 40 spindle stroke 600 mm positioning speed in allen Achsen 1 - 10.00 mm/min Cojb2Wmv positioning accuracy auf 300 mm = +/- 0,01 mm table load max. 500 kg work height max. 1000 mm weight of the machine ca. 4,8 t dimensions of the machine ca. 3,5 x 3,3 x 3,1 m Control Bosch CNC plate drilling system HMB PBM1000/60 - W12 for drilling head plates and Base plates in steel construction with tool changer (12x) Number of drilling spindles: 1 pc. Operating Voltage: 220/380V Frequency: 50 Hz Total connection value: 22 kVA

Condition: used, >> Condition very good! >> Speed: 45 - 4000 rpm. >> Fehlmann cross table: 380 x 750 mm >> XYZ: 420/300/500 mm >> Motorized height adjustment of the drilling head Htw8Pwlc8

Condition: good (used), Jig Boring Machine WMW BKoE 450 x 800 Travel X: 560 mm Travel Y: 400 mm Travel Z: 470 mm Spindle: Ø 90 mm Cone: CM4 Spindle exit: 150 mm Spindle speed: from 50 to 1600 RPM Table size: 450 x 800 mm Maxi loading capacity on table: 400 kg Scale3 axes HEIDENHAIN Automatic descent Voltage: 380 V Width with ends table: 2900 mm / without ends table: 1500 mm Depth:2500 mm Total height: 2600 mm 7Dwfi92Fhf Weight: 4,5 T

Condition: good (used), Good working Coordinate drilling machine Hgoyclrj

Condition: excellent (used), Henri Hauser M5 DR jig boring machine spindle diameter 90 mm x-travel 700 mm y-travel 500 mm Drilling capacity in steel 40 mm spindle mounting MK 4 drilling spindle stroke 170 mm number of spindle revolutions 2 infinitely variable 10-2000 rpm Boring diameter max. 230 mm Table dimension - longitudinal 900 mm Table dimension - crosswise 770 mm Dyjd3Mt Vertical travel of cross beam 630 mm Drilling spindle 6 pieces from/to 0.02-0..20 rpm Clearance between uprights 900 mm Passage between spindle and table 815 Spindle motor 4.0 HP Total power requirement 380 V Machine weight approx. 3.9 t Complete factory closure, large selection of storage platforms, pallet racks, shelf racks, paternosters. High-quality industrial machines, lathes, grinding machines, hand machines Further articles - new and used - you will find in our shop! International shipping costs on request!

Year of construction: 1975, Condition: used, spindle diameter 135 mm x-travel 1400 mm y-travel 1000 mm total power requirement kW weight of the machine ca. t dimensions of the machine ca. m B8Iiw283 Mechanically maintained. Very good condition. New digital display. Accessories: Swivel table PI-5 Rotary table PD-800 Tools Raised stand! Adjustment travel axis Z: 300 mm Max. table load: 2000 kg Spindle cone: MK 4 Clamping surface table: 1570 x 1024 mm Maximum spindle speed: 2000 rpm. Free passage column: 1600 mm

Year of construction: 2023, Condition: new, Efficient drilling and milling in the trade. We would be pleased to present our CNC controlled drilling machine KBA 40 to you in our company and invite you to be advised. Bufzeenrd0 We look forward to hearing from you.

Condition: like new (used), CNC vertical jig boring machine WMW MIKROMAT Travel X: 1120 mm Travel Y: 710 mm Spindle travel Z: 315 mm Travel W: 630 mm Numerical Command: CNC NUM 1060 Spindle: Ø 125 mm Cone: SA40 Rotation: from 36 to 2240 RPM Table size: 1400 x 900 mm Distance between colums: 1080 mm Bbgktihm Maxi distance spindle nose/table: from 0 to 900 mm max Maxi eligible load on table: 1000 kg max Separate electrical panel Machine renewed in 2000 with CN NUM1060 Voltage: 380 V Dimensions (L x W x H): 4000 x 2460 x 3030 mm Weight: approx. 9 T

Condition: used, spindle diameter 135 mm x-travel 1000 mm distance between columns 1000 mm Control total power requirement kW weight of the machine ca. t dimensions of the machine ca. m - Complete dismantling of the machines - Scraping of all slideways - Preparation for repainting ( RAL colour to be determined by the customer ) Cxaiycsvxc - Replacement of all damaged parts - Complete disassembly of the drilling head and replacement of all bearings - Complete disassembly of the work spindle and greasing of the spindle bearings - Installation of new CNC control ( customer can choose between Fanuc , Heidenhain or Siemens ) - Installation of new motors ( X , Y , Z axis and spindle motor ) - Installation of new Heidenhain scales - New control cabinet according to EU standards - Complete new wiring of the machine - Measuring of the geometry according to the original test protocol - Measuring of the axes by laser. Table adjustment axis X 1000 mm Drilling slide adjustment axis Y 700 mm Spindle adjustment axis Z 300 mm Spindle cone: ISO 45 spindle speed: 3000 rpm Table clamping surface: 1100 x 842 mm Free passage between the columns: 1100 mm Permissible table load: 1500 kG Year of construction: 1990 - 2002

Condition: excellent (used), Year of construction: 1987, Functionality: fully functional, Travel distance X-axis: 1,500 mm, Travel distance Y-axis: 1,000 mm, Travel distance Z-axis: 300 mm, Table length: 1,600 mm, Table width: 1,240 mm, Feed length W-axis: 900 mm, Coordinate boring machine SIP MP740 with Heidenhain iTNC426M retrofitted and overhauled 2000 Bvippmls7Y TECHNICAL DATA Table size 1600 x 1240 mm Travel X,Y,Z 1500 x 1000 x 300 mm Tool holder ISO45