Used machining centers (vertical) X-axis travel 1200-1699mm for sale (210)

Condition: used, Year of construction: 2000, travel distance X-axis: 1,250 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 750 mm, controller model: Fanuc 16i-M, spindle speed (max.): 4,000 rpm, TECHNICAL DETAILS X-axis travel: 1,250 mm Y-axis travel: 700 mm Cjdpfx Ago Agfr Eorohd Z-axis travel: 750 mm Distance from spindle nose to table: 100–850 mm Rapid traverse rate X/Y/Z: 15 m/min Spindle speed: 4,000 rpm Spindle power: 26 kW Spindle interface: ISO 50 / DIN Number of pallets: 2 Table size: 650 × 1,400 mm Table load: max. 1,500 kg Magazine type: Chain magazine Number of tool positions: 41 Tool diameter: max. 120 mm Tool diameter with free adjacent positions: max. 200 mm Tool length: max. 400 mm Tool weight: max. 20 kg MACHINE DETAILS High-pressure coolant pressure: 30 bar CNC control: Fanuc 16i-M Dimensions & Weight Machine weight: 16,750 kg Overall dimensions: 7,135 × 5,300 × 3,426 mm EQUIPMENT Gear change Chip conveyor

Condition: excellent (used), Year of construction: 2008, operating hours: 2,483 h, functionality: fully functional, machine/vehicle number: 8015, travel distance X-axis: 1,200 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain iTNC 530, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 1,200 mm Travel range, Y-axis: 600 mm Travel range, Z-axis: 600 mm Rapid traverse rate X/Y: 30 m/min Rapid traverse rate Z: 24 m/min Table size: 1,300 × 600 mm Spindle speed: 50–12,000 rpm Spindle power: 21 / 15 kW Tool holder: BT40 Spindle drive: direct drive Tool positions: 40 Tool change time: approx. 4 s Tool changer: dual gripper MACHINE DETAILS Coolant pressure: 20 bar Chjdpe Aggibofx Agrsd CNC control: Heidenhain iTNC 530 Screen diagonal: 15 inches Operating voltage: 400 V Connected power: 25 kVA Mains frequency: 50/60 Hz Number of phases: 3 Machine weight: approx. 7,500 kg Operating hours Spindle hours: 2,483 h Machine operating hours: 14,198 h Control operating hours: 65,193 h EQUIPMENT Automatic tool changer with dual gripper Internal cooling through the spindle (IKZ), Form A High-pressure coolant system Additional coolant tank Two switchable filter cartridges Chip conveyor parallel to the X-axis Three-color signal light (red/yellow/green) Fully enclosed work area Work area lighting Machine documentation Toolbox Alignment screws and washers CE specification

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, travel distance X-axis: 1,660 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, controller model: Mazatrol M+, spindle speed (max.): 7,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 1,660 mm Travel range, Y-axis: 510 mm Travel range, Z-axis: 510 mm Table dimensions: 2,000 × 510 mm Table load capacity: max. 1,000 kg Spindle speed: 7,000 rpm Tool holder: SK 40 Tool magazine: 48 tool positions Cedpfs Ah H Ihjx Agrohd MACHINE DETAILS CNC control: Mazatrol M+ Machine weight: approx. 7,500 kg EQUIPMENT Chip conveyor: MAYFRAN 4th axis with rotary indexing table: Rotamatik RM 100

Condition: used, Year of construction: 2013, Doosan DNM650 Vertical Machining Centre (2013), Traverses X Y Z: 1300 x 650 x 510mm, Table 1200 x 540mm, Spindle Speed 12,000rpm, BT40 Spindle Taper, Spindle Motor 17kW, FANUC Oi Control, 30 Station ATC, Low Volt light, Through Spindle Coolant. S/No. MV0011-000877, Machine Weight: 8500kg. Country of Origin: Korea Cedpfxo Ah E S Hj Agrshd Location: This lot is located in Leicester, UK. A charge of £250 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Condition: ready for operation (used), Year of construction: 2011, travel distance X-axis: 1,525 mm, travel distance Y-axis: 762 mm, travel distance Z-axis: 625 mm, overall weight: 13,500 kg, spindle speed (max.): 12,000 rpm, number of axes: 3, This 3-axis DOOSAN Mynx 7500 was manufactured in 2011. It features an impressive X-axis travel of 1,525 mm, Y-axis travel of 762 mm, and Z-axis travel of 625 mm. The machine is equipped with a spindle speed of 12,000 rpm and a tool changer capacity of 30 stations. If you are looking to get high-quality machining capabilities, consider the DOOSAN Mynx 7500 vertical machining centre we have for sale. Contact us for further details. - Control Unit: DOOSAN-FANUC i Series - Tool Changer Capacity: 30 stations - Through-Spindle Coolant (TSC): 20 bar - External Coolant: Yes - Measuring Probe: Renishaw probe - Operating Hours - Cutting Time: 40,592 h - Operating Hours - Cycle Time: 2,760 h - Operating Hours - Part Count: 277 - Power Supply: AC 200/220V, 3 Phase, PE, 50/60 Hz - Rated Power: 38.35 kVA - Full Load Current: 137.34 A - Interrupting Capacity: 5 kA - Short Circuit Capacity: 10 kA - Total Machine Weight: 13,500 kg Cjdpfx Ae Ah Exdegrshd Technical Specification Taper Size SK 40

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, travel distance X-axis: 1,500 mm, travel distance Y-axis: 670 mm, travel distance Z-axis: 625 mm, controller manufacturer: HEIDENHAIN, controller model: TNC-620, workpiece weight (max.): 1,300 kg, total height: 3,100 mm, total length: 4,400 mm, total width: 2,450 mm, table width: 670 mm, table length: 1,600 mm, overall weight: 9,000 kg, spindle speed (min.): 80 rpm, spindle speed (max.): 12,000 rpm, coolant supply: 20 bar, distance table center to spindle nose: 775 mm, spindle nose: ISO 40, number of slots in tool magazine: 40, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, Used 3-axis vertical machining center with Heidenhain TNC-620 CNC Cjdpfx Age Afpq Rsrjhd

Condition: good (used), Year of construction: 2008, functionality: fully functional, Quaser MV 154 PL, Year of manufacture: 2008, Control system: Heidenhain iTNC 530, Travel range X/Y/Z: 1000/530/560 mm, Tool changer: 30-position, Chodpfx Ae Aawnyjgrod SK 40, Air blow-through spindle, Internal cooling system (IKZ): 20 bar, Chip conveyor, 3D measuring probe, Thermal compensation, Temperature-controlled oil cooling system, Spindle replaced in 2021.

Condition: like new (used), Year of construction: 2024, operating hours: 660 h, functionality: fully functional, overall weight: 8,255 kg, HAAS VF-6SS Vertical Machining Center – 2024 Chodpfx Agozrhrcersd 2024 HAAS VF-6SS Vertical Machining Center in excellent condition, purchased new in 2024 and with very low operating hours. The machine has been used only for a specific production project and remains in outstanding mechanical and cosmetic condition. Equipment HAAS HRT310 Rotary Table (4th Axis) HTS9 Tailstock WIPS – Wireless Intuitive Probing System Through Spindle Coolant (21 bar) Through Tool Air Blast (TAB) High Speed Machining (HSM) 12,000 rpm Direct Drive Spindle 22.4 kW Spindle Motor Haas Next Generation Control Ethernet & USB Automatic Lubrication The machine can be inspected under power in Portugal. Immediately available.

Condition: ready for operation (used), Year of construction: 2024, operating hours: 54 h, travel distance X-axis: 1,630 mm, travel distance Y-axis: 762 mm, travel distance Z-axis: 650 mm, controller manufacturer: FANUC, controller model: i-Series, total height: 3,170 mm, total width: 3,850 mm, table width: 1,630 mm, table length: 760 mm, table load: 1,500 kg, overall weight: 13,500 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 28,000 W, number of slots in tool magazine: 30, tool weight: 8,000 g, product length (max.): 3,480 mm, number of axes: 3, This 3-axis DOOSAN DNM 750 II was manufactured in 2023. It features a generous X-axis travel of 1,630 mm, Y-axis travel of 762 mm, and Z-axis travel of 650 mm. The machine has a maximum table load capacity of 1,500 kg and a spindle speed range of up to 12,000 rpm. If you are looking to get high-quality machining capabilities, consider the DOOSAN DNM 750 II vertical machining centre we have for sale. Contact us for further details. Codpfx As Ahpqmjgrehd - Manufacturer: DN SOLUTIONS- Model: DNM 750 II- Year of Manufacture / Build Date: 12/2023- CNC Control: FANUC i-Series (Fanuc F0i Touch with Manual Guide / EZ Guide and Fanuc HMI)- Screen Size: 15" Touch Screen- Operating Hours:* Control On (STRG EIN): 299 h 5 min* Operating Time / Run Time: 53 h 54 min 14 s* Machining Time: 40 h 15 min 28 s* Cycle Time: 0 h 0 m 0 s- Travel X-Axis: 1,630 mm- Travel Y-Axis: 762 mm- Travel Z-Axis: 650 mm- Table Size: 1,630 x 760 mm- Table Surface: T-slots (5 - 125 x 18H8)- Max. Workpiece Dimensions / Height: 725 mm- Max. Table Load Capacity: 1,500 kg- Distance Spindle Nose to Table Surface: 150 - 800 mm- Rapid Traverse (X / Y / Z): 30 / 30 / 24 m/min- Max. Cutting Feedrate: 12,000 mm/min- Acceleration / Deceleration Time (X / Y / Z): 150 / 160 / 150 ms- Axis Drive Motor Power (X / Y / Z): 4 / 4 / 4 kW- Ball Screw Diameter x Lead (X / Y / Z): 45 x 12 mm / 45 x 12 mm / 45 x 10 mm- Positioning Accuracy (X / Y / Z): 0.014 mm / 0.008 mm / 0.008 mm- Repeatability (X / Y / Z): 0.007 mm / 0.005 mm / 0.005 mm- Spindle Speed Range: Up to 12,000 rpm- Spindle Drive Type: Direct Connection (Type 2)- Spindle Motor Power (Continuous / S3 25%): 11 kW / 28 kW- Spindle Base Speed: 1,500 rpm- Max. Spindle Torque: 159.3 Nm (S3 15%)- Spindle Clamping Force: 7.35 kN- Tool Holder Taper: SK40 (converted to SK40 per order confirmation DIN 69871 / ISO 7388-3; convertible to BT40 / BBT40)- Spindle Cooling Tank Capacity: 40 L (Cooling capacity 1.56 kW at 50 Hz / 1.76 kW at 60 Hz)- Tool Storage Capacity: 30 tool stations- Tool Selection Type: Memory Random- Max. Tool Diameter (Continuous): 80 mm- Max. Tool Diameter (Adjacent Pots Empty): 125 mm- Max. Tool Length: 300 mm- Max. Tool Weight: 8 kg- Max. Tool Moment: 5.88 Nm- Tool-to-Tool Time: 1.6 s (50 Hz) / 1.3 s (60 Hz)- Chip-to-Chip Time: 4.0 s (50 Hz) / 3.7 s (60 Hz)- Through-Spindle Coolant (TSC / IKZ): Middle pressure, 4.0 kW pump, 20 bar, 25 µm cyclone filter- External Flood Coolant: 1.8 kW pump, 7 bar, 30 L/min- Coolant Flush Pump (Inside Flushing): 1.1 kW, max. 0.75 MPa (50 Hz), 20 L/min- Coolant Tank Capacity: 520 L- Coolant Gun: Included (with separate pump 0.6 kW)- Air Gun: Included- Spindle Compressed Air Blow: Compressed air outlet above spindle for chuck/fixture cleaning- Oil Skimmer: Belt type- Mist Collector / Oil Mist Extraction: Dormatec AF-30P (0.75 kW, 29 m³/min capacity, 200 mm inlet, H13 filter, 99.

Condition: used, Year of construction: 2008, functionality: fully functional, Equipment: chip conveyor, documentation/manual, Wele Awea Machining Center Type AA1165 Fanuc Series 18i-MB CNC Year 2008 Chip Conveyor ✅ Chsdpsz N Tf Iefx Agred Documentation ✅ Video Available ✅ Inspection Possible ✅

Condition: like new (used), Year of construction: 2019, operating hours: 2,557 h, functionality: fully functional, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, feed rate X-axis: 25 m/min, feed rate Y-axis: 25 m/min, feed rate Z-axis: 25 m/min, controller manufacturer: HAAS, controller model: CNC Control, total height: 3,096 mm, total length: 3,832 mm, total width: 3,402 mm, table width: 473 mm, table length: 1,321 mm, table load: 1,500 kg, overall weight: 6,500 kg, spindle speed (max.): 8,000 rpm, operating hours of spindle: 2,557 h, spindle nose: BT40, number of spindles: 1, number of slots in tool magazine: 20, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, The machine is in excellent condition and has only 2557 spindle hours, and it is very well-equipped! Chodez Nfiropfx Agrsd This HAAS VF-4 is equipped with: - Chip conveyor - Renishaw OTS tool probe - Renishaw (HAAS 40-2) 3D probe - Programmable coolant nozzle - Mechanical preparation for a 4th axis - Approx. 25 tool holders incl. tools - Machine vise - Coolant gun - 3 Renishaw probe styli - Coolant tank - Original documentation.

Condition: used, Year of construction: 2014, Technical specifications • Control system: Fanuc 0i-MD • Travel distances (axes): Cede Af Ndfspfx Agrjhd • X-axis: 1,400 mm • Y-axis: 800 mm (4 guide rails) • Z-axis: 700 mm • Spindle: • Power: 22 kW • Speed: 10,000 rpm • Tool taper: BT40 • Table size: 1,650 x 800 mm • Tool changer: 24 tools • Prepared for 4th axis • Chip conveyor • Handwheel Guides: Hardened, precision-ground, and Turcite-B coated four-surface rectangular guides (boxways) for heavy-duty machining.

Condition: good (used), Year of construction: 2007, X 1,200 Y 800 Z 510mm, table 500mm diam. HSK 63, 20.000Rpm, cooling through spindle 20 bar, ATC 40 pos, Heidenhain TNC 530, weight 16.100kg Csdpfxj Abw Sno Agrjhd

Condition: ready for operation (used), Year of construction: 2019, travel distance X-axis: 1,250 mm, spindle speed (max.): 10,000 rpm, number of axes: 3, This 3-axis WEMAS VZ 1250 was manufactured in 2019. It features a robust tool changer with approximately 24–30 stations and comes fully functional and freshly serviced. The machine includes vises, an external tool cabinet with an extensive set of tool holders, collets, and milling/drilling tooling. If you are looking to get high-quality machining capabilities, consider the WEMAS VZ 1250 vertical machining centre we have for sale. Contact us for further details. Chedo Agvhajpfx Agrjd - Power: 35 kVA - Voltage: 400 V - Phases: 3 + PE - Weight: 7900 kg - Tool Changer: Disc/drum type tool magazine (approx. 24–30 stations) - Included Equipment / Accessories: Machine vises (including HOLEX vise mounted on table), external tool cabinet with extensive set of tool holders, collets, and milling/drilling tooling

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, controller manufacturer: FANUC, controller model: FANUC 0i-MF Plus, total height: 3,030 mm, total length: 3,240 mm, total width: 2,550 mm, table width: 600 mm, table length: 1,200 mm, table load: 500 kg, overall weight: 6,990 kg, spindle speed (min.): 80 rpm, spindle speed (max.): 12,000 rpm, distance table center to spindle nose: 710 mm, spindle motor power: 15 W, spindle nose: DIN 40, number of spindles: 1, number of slots in tool magazine: 30, tool length: 280 mm, tool diameter: 76 mm, tool weight: 7 g, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Used 3-axis vertical machining center with FANUC CNC Codpfxoz Smdws Agrohd

Condition: used, Year of construction: 2016, operating hours: 48,000 h, functionality: fully functional, spindle motor power: 22,400 W, number of spindles: 1, number of slots in tool magazine: 24, Equipment: chip conveyor, We are offering this used Haas VF-4SS vertical machining center, manufactured in 2016. It operated for 10 years in a two-shift system (approximately 48,000 hours) and was exclusively used for dry machining of castings. The machine is powered and ready for inspection. Inspection is possible in 08543 Pöhl / Helmsgrün. Up to 8 identical VF4SS machines are available for sale, and matching dust extraction systems are also available. Model: VF-4SS Serial number: 1123904 Software version: M18.24B Csdpfx Agsz R Rf Asrshd Link date: 14.04.2015 12:47:41 Rotary firmware version: 19 Floppy version: FV 6 14.011 Video version: VV 41 Mocon #1 version: 17.28 Monitor version: 2.02 FPGA version: 1.15B Mocon #2 version: SKBIF version: 49 (SKBIF-2 MODE) RJH type: C Operating time: 4829:52:51 h:mm:ss Number of tool changes: 648213 Power-on cycles: 729 If you have any questions or require further information, please feel free to send us a message or call us.

Condition: good (used), Year of construction: 2002, functionality: fully functional, total height: 2,900 mm, total length: 5,000 mm, total width: 3,000 mm, table width: 850 mm, table length: 1,250 mm, overall weight: 8,000 kg, spindle motor power: 15,000 W, number of spindles: 1, type of input current: AC, Equipment: chip conveyor, documentation/manual, We are offering a machining center from the manufacturer Ibarmia with a controlled 4th axis/rotary table. The machine is in good condition and can be inspected and tested in our facilities while powered on. Manufacturer: Ibarmia Type: ZV25/L16000 Year of manufacture: 2002 Control: GE Fanuc Series 18i-M Technical data: Travel distances X-Y-Z: 1600x410x410 mm Travel distance B-axis: 360*0.001° Rapid traverse X: 40 m/min Rapid traverse Y-Z: 60 m/min Main spindle: Spindle speed: 15,000 rpm Main spindle power: ISO-SK-40 Tool changer: Number of positions: 24 Machining area: Table dimensions: 850x1250 mm Internal coolant supply (IKZ) Machine dimensions: 5000x3000x2900 mm Weight: 8,000 kg Csdoz Ia U Eepfx Agrshd

Condition: ready for operation (used), Year of construction: 2000, operating hours: 8,896 h, functionality: fully functional, travel distance X-axis: 1,200 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 500 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, controller manufacturer: Heidenhain, controller model: TNC430, workpiece weight (max.): 1,000 kg, total height: 3,050 mm, total length: 4,000 mm, total width: 2,850 mm, table width: 800 mm, table length: 800 mm, table load: 1,000 kg, rotary table diameter: 800 mm, overall weight: 14,000 kg, spindle speed (max.): 15,000 rpm, operating hours of spindle: 8,896 h, coolant supply: 40 bar, spindle motor power: 15,000 W, spindle nose: HSK-A63, number of spindles: 1, number of slots in tool magazine: 30, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, The machine comes from a die-making company and has therefore not been used for many hours and has undergone relatively light machining in recent years. Due to an upgrade of the machine park, the machine is no longer needed but is still in full working order and can be inspected in our workshop while it is running. Additional options & accessories: - Chip conveyor - IKZ (internal cooling through the spindle) - 15,000 rpm HSK-A63 spindle - Heidenhain 3D probe - Electronic handwheel Cjdpfo Af Ndxox Agrehd - Rotoclear - Electrical compensation for thermal expansion - BLUM laser measuring system - Coolant nozzle in the cabinet Weight & dimensions: approx. 14,000 kg 4.0 x 2.85 x 3.05 m (L x W x H)

Condition: used, Year of construction: 2003, travel distance X-axis: 1,600 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 900 mm, controller manufacturer: Heidenhain, controller model: iTNC 530, overall weight: 18,500 kg, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 30, Machining Center - Vertical Manufacturer: MIKRON Model: VCE 1600 PRO Year of manufacture: 2003 Control system: Heidenhain iTNC 530 Technical specifications: X-axis: 1,600 mm Y-axis: 900 mm Z-axis: 900 mm Spindle speed: 10,000 rpm Number of tool stations: 30 Machine weight: approx. 18,500 kg Condition: Used Technical features & accessories: - 2 rear-mounted chip conveyors, integrated into the machine Chjds Ahrm Dspfx Agrjd - Oil cooler - Coolant filtration system Accessories, tools, and clamping devices shown are included in the scope of delivery only if explicitly stated in the additional information. Subject to changes and errors in the technical data and specifications; prior sale reserved!

Condition: ready for operation (used), Year of construction: 2015, operating hours: 3,343 h, travel distance X-axis: 1,626 mm, travel distance Y-axis: 1,016 mm, travel distance Z-axis: 762 mm, controller manufacturer: HAAS, total height: 3,282 mm, total width: 4,039 mm, table width: 914 mm, table length: 1,626 mm, table load: 1,814 kg, overall weight: 11,250 kg, spindle speed (max.): 8,100 rpm, spindle motor power: 22,400 W, number of slots in tool magazine: 40, tool weight: 5,400 g, product length (max.): 4,827 mm, number of axes: 3, This 3-axis Haas VF-8 vertical machining centre was manufactured in 2015. It features an impressive X-axis travel of 1626 mm, Y-axis travel of 1016 mm, and Z-axis travel of 762 mm. The machine includes a robust table size of 1626 x 914 mm and a maximum table load of 1814 kg. If you are looking to get high-quality machining capabilities, consider the Haas VF-8 vertical machining centre we have for sale. Contact us for further details. • CNC control • Haas CNC control, Classic generation • 15-inch colour LCD • USB port • Program memory: 1 MB • Remote jog handle with colour display • Axis travels and feed rates • Spindle nose to table distance: 102–864 mm • Rapid traverse (X/Y/Z): 15.2 m/min • Maximum cutting feed rate: 12.7 m/min • Worktable • Table dimensions: 1626 × 914 mm • Max evenly distributed table load: 1814 kgSpindle • Spindle taper: 40 taper • Maximum spindle speed: 8,100 rpm • Spindle power: 15 kW • Two-speed gearbox • Spindle cooling system • Spindle taper air blast • Rigid tapping Chjdpfx Agj Adz Iljred • Tool changer • Side-mounted tool changer: 40 positions • Coolant and chip removal • Through-spindle coolant: 20 bar, 22 L/min • ACF additional coolant filtration system: 25 µm • Programmable coolant nozzle position • Coolant system with pull-out coolant tank • Screw-type chip auger • Probing and machining options • WIPS-R wireless workpiece and tool probing system • Tool length and radius measurement • Workpiece measurement and setting cycles • PMDS probe interface, internal power supply and wiring • Spindle orientation, coordinate rotation and macros • VQC Visual Quick Code conversational programming • HSM High-Speed Machining with look-ahead for machining complex contours using three-axis interpolation • 4AXD fourth-axis preparation, including connections and wiring. Rotary table not included • APC-READY automatic pallet changer preparation, including eight additional functions, macro support and wiring. Pallet changer not specified as included Additional equipment • Ball screw thermal compensation • Fully enclosed machining area with sliding front doors and hinged side windows • Program memory lock • Compressed-air connection • EPFDM early power failure detection module • Automatic central lubrication • Machine lighting • CABCOOL CNC control cabinet cooling unit Technical Specification Taper Size ISO 40 Through-spindle Coolant Yes

Condition: good (used), Year of construction: 2007, operating hours: 9,000 h, functionality: fully functional, total length: 3,200 mm, overall weight: 10,000 kg, The machine is fully functional and available immediately. Chsdpfxs Abbg Ns Agrsd

Condition: ready for operation (used), Year of construction: 2007, operating hours: 14,136 h, travel distance X-axis: 1,300 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 800 mm, controller manufacturer: BOSCH, controller model: Rexroth, table load: 400 kg, spindle speed (max.): 15,000 rpm, spindle motor power: 16,000 W, number of axes: 4, This 4-axis Matec MATEC 30 HV/K was manufactured in 2007, featuring a robust vertical machining center design. It includes a Bosch Rexroth control, a standard spindle with a speed range of 20-15,000 rpm, and a maximum torque of 100 Nm. The machine offers a tool changer with a capacity of 36 tools and a machine table that supports up to 400 kg. If you are looking to get high-quality milling capabilities consider the Matec MATEC 30 HV/K machine we have for sale. Contact us for more information. Machine Benefits Qualitative Machine Benefits • The machine was manufactured in 2007 but was retrofitted in 2016 Technical Machine Benefits Csdjx D Ix Topfx Agrohd • Hard disk: 26 gb • Integrated network card • Max. Torque: 100 nm (40% ed) • Temperature-controlled liquid cooling • Work area: fully encapsulated with roof, bellows (steel slats) • Installation: height-adjustable set-up elements • Matec hv 30 was overhauled in 2016 by manufacturer matec maschinenbau Extra Information Cooling & Accessories Coolant: High-pressure Coolant Supply (20 bar, optional 40 bar) Paper Belt Filter (30 µm fineness) Tank Volume: 450 l Chip Conveyor: Integrated Scraper Conveyor Oil Mist Extraction: Electrostatic Filter (1000 m³/h) Measuring & Safety Technology Direct Measuring System: Linear encoder in all axes 3D Measuring Probe: Radio transmission to the control system Tool Monitoring: Laser-supported Tool Breakage Monitoring Tool Length Measurement (software) Optional Spindle (HSK 63-A): Higher Power: 30 kW / 190 Nm Drilling Capacity (steel): up to 60 mm Milling Capacity: approx. 500 cm³/min Technical Specification Taper Size HSK 63

Condition: used, TECHNICAL DETAILS - Number of axes : 3 MILLING SPINDLE - Tool holder type : BT40 - Spindle power : 12.5 [kW] - Spindle speeds : 15000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 1600 / 1200 / 700 [mm] - Rapid traverses rates (X/Y/Z) : 30 / 30 / 30 [m/min] - Cutting feed rates (X/Y/Z) : 20 / 20 / 20 [m/min] TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 40 Chsdpfxs Ahkz Rj Agred TABLE - Table dimensions : 1800 x 1300 [mm] - Maximum weight upon table : 4000 [kg] - Distance table / spindle nose (min./max.) : 900 [mm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 50 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 5.340 x 3.710 [mm] - Machine height : 4.060 [mm] - Machine weight : 18870 [kg] EQUIPMENT - CNC : Heidenhain TNC 640 - Interface : Ethernet / RS232 / USB / PCMCIA - Interactive programming - Electronic handwheel - Linear scales - Rigid tapping - Coolant tank * with high-pressure pump : 20 [bars] * with paper filtering unit - Coolant through spindle - Chips conveyor - Spindle cooling unit - Tool probe : Heidenhain TT160 - Workpiece probe : Heidenhain TS460 - Electric transformer

Condition: ready for operation (used), Year of construction: 2023, travel distance X-axis: 1,524 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 635 mm, controller manufacturer: HAAS, spindle speed (max.): 7,500 rpm, spindle motor power: 22,400 W, number of axes: 3, This 3-axis HAAS VF-5/50XT was manufactured in 2023. It features an impressive X-axis travel of 1,524 mm, Y-axis travel of 660 mm, and Z-axis travel of 635 mm. The machine includes a robust table size of 1,575 × 584 mm and a maximum table load of 1,814 kg. If you are looking to get high-quality machining capabilities, consider the HAAS VF-5/50XT vertical machining centre we have for sale. Contact us for further details. - Table Dimensions: 1,575 × 584 mm- Maximum Table Load: 1,814 kg- Spindle Taper: CT 50 / BT 50- Tool Changer Capacity: 30+1 pockets- Rapid Traverse (X/Y/Z): 18 m/min- Coolant Tank Capacity: 360 L- Machine Weight: approx. 7,371 kg- Transport Dimensions (L × W × H): approx. 4,270 × 2,600 × 3,180 mm- Supply Voltage: 440 V - Phase: 3-Phase - Frequency: 50/60 Hz- Full Load Current: 55 A- Maximum Load Current: 50 A- Wiring Diagram Number: 96 / 0284- CE Marked: Yes Chode Ahxvaepfx Agred

Condition: used, Year of construction: 2000, functionality: limited functionality, travel distance X-axis: 1,500 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 450 mm, total height: 2,100 mm, total length: 3,500 mm, total width: 2,200 mm, table load: 700 kg, overall weight: 5,000 kg, spindle speed (max.): 3,000 rpm, distance table to spindle center: 600 mm, input voltage: 380 V, type of input current: three-phase, distance stand to spindle center: 450 mm, distance table to quill: 450 mm, grinding spindle motor power: 20 W, grinding spindle speed: 3,000 rpm, LGB brand surface grinder, machine with few hours of use, price plus VAT. I have other machines for the metalworking industry; please contact me. Codpfxsz Eac Rj Agrjhd