Used center lathes 300-399mm turning diameter over bed for sale (212)

Condition: used, turning diameter over cross slide: 230 mm, turning diameter over bed slide: 380 mm, center height: 190 mm, center width: 1,270 mm, Center Lathe Manufacturer: Strojimport, Type TK 380 x 1500 Technical Specifications Manufacturer: Strojimport Type: TK 380 x 1500 Year of Construction: Unknown Control: Conventional Center Distance: 1270 mm Turning Diameter over Bed: 380 mm Gjdpfxjwgch Do Ag Dsuk Turning Diameter over slide 230 mm Center height 190 mm Spindle speed 45 – 2000 rpm Bed width / length / height 300 / 2120 / 305 mm Spindle bore 52 mm Dimensions: L 2.70 x W 1.00 x H 1.60 m Machine weight: 1200 kg Equipment - 3-axis digital readout - 3-jaw chuck with internal and external chucking - 2 live centers - 1 fixed center - 4 quick-change tool holders - 1 steady rest - 1 drill chuck - Machine feet All information is subject to change. A live demonstration is available at any time in our showroom.

Condition: reconditioned (used), Year of construction: 1989, Universal lead and spindle lathe Guodpfx Agog R S Rce Djk Make: WEILER Model: Condor B Year of manufacture: 1989 - overhauled newly painted RAL 7035 light gray Mach. No.: 1401 with guarantee Accessories: - 3-A digital display FAGOR Innova 30i T, new - Chuck protection hood with electrical fuse, new - Quick-change tool holder base body size B - Bed stop - Coolant device - Chip back wall - Operating instructions -used, as seen -

Condition: good (used), Tovaglieri parallel lathe Used, from school provenance. Very good condition. Godpfx Ajkt U E Iog Douk Height of centers : mm 180. Distance between centers : mm 700. Bar passage : mm 45 Supplied accessories No. 4 available except sold

Condition: new, Year of construction: 2025, 0390 mm 240 mm 1250 mm 190 mm 54 mm 5,5 kW Guodpowp Trlefx Ag Dsk

Condition: good (used), Used COLCHESTER MASTER 3250 center lathe and feed spindle lathe center height 170mm center distance: 650mm spindle bore: 42mm Infinitely variable speed from 15-3250 rpm 1 x SCHUNK wedge bar lathe chuck Ø160mm 1 x MULTIFIX steel holder size B with 4 inserts Machine light, chuck protection electrically fused, Godpfouqkf Nsx Ag Douk machine shoes 1 x rotating center point, 1 x rotating center point with pressure indicator 1 x drill chuck with tapered arbor The machine is located at our premises in 71334 Waiblingen-Beinstein and is available immediately. An inspection of the machine is possible by arrangement.

Condition: excellent (used), Year of construction: 2009, - Digital display. - Accessories available. Tips Height 170 mm Tip width 650 mm turning diameter over the bed 350 mm over the cross slide 196 mm in the offset 535 mm Width in front of the front plate 165 mm Spindle Spindle bore 42 mm Spindle nose D1-4" Camlock Morse taper in bushing no. 3 MT Spindle speeds 3 speed ranges 0 - 3250 rpm Main motor 7.5 kW (10 HP) Bed Slide guide width 318 mm Guide type V-shaped and flat Cross slide Width and length 180 - 850 mm Travel 250 mm Top slide Width 90 mm Travel 130 mm Tool holder 20 x 20 mm Quick-action tool lock Dickson No. 2 Guodpfx Astr Ud Ssg Dok Tailstock Diameter of quill (nominal value) 63 mm Travel 145 mm Morse taper no. 4 M.T. Offset ±12 mm Lead screw Diameter 32 mm Thread 6 mm pitch or 4 T.P.I. Thread Metric Pitch 0.2 - 14 mm (51) Inch thread T.P.I. 2 -56 (56) Module thread pitches 0.2 - 3.5 (20) Diametrical pitch (D.P.) 8 - 56 (20) Feed rate Metric (R10 series) 0.018 - 1.2 mm/rev Inch (R10 series) 0.0007 - 0.048"/rev Face feed = approx. half of the longitudinal values Machine height Floor to spindle center 1070 mm Total length 1250 mm Machine 2500 mm Total width 1100 mm Height over all 1300 mm Cooling pump Type AQ 3MG Headstock oil pump Type Interlube three-phase 27662-131 Weight 1250 mm between tips approx. 1450 kg

Condition: good (used), HBX 360 Distance between centers (mm) 750 Center height (mm) 180 Diameter admitted above the bed (mm) 360 Diameter admitted above the transverse slide (mm) 180 Spindle bore (mm) 37 Maximum stroke of the transverse slide (mm) 180 Width of the transverse slide (mm) 160 Sleeve stroke (mm) 150 Diameter of the tailstock sleeve (mm) 46 Bed width (mm) 335 Small carriage stroke (mm) 110 Small carriage width (mm) 110 Turret type quick change Spindle taper type Morse taper of the tailstock MT5 Spindle speed (rpm) 50 to 3000 Spindle variator yes (hydraulic) Spindle motor power (Kw) 4.5 Transverse working feed range (m/min) 0.0125 to 5.6 Longitudinal rapid feed range (m/min) 56 to 112 Threading Gedpfx Aevlwzdjg Djuk Yes

Condition: reconditioned (used), Year of construction: 1990, Universal lead and feed spindle lathe Make: WEILER Model: Praktikum 160 B Year of manufacture: 1990 - overhauled newly painted RAL 7035 light gray Mach. no.: 90-160-2054 Center height: 160 mm Center width: 650 mm geometric acceptance with test report Accessories: - 3-axis digital display FAGOR Innova 30i T - covered lead and feed spindle - braked drive motor - coolant system - electrically secured chuck protection hood - quick-change tool holder size A - simple bed stop - chip back wall Gedpfx Ashy Tdyjg Deuk - operating instructions with guarantee used as seen The machine is technically corresponding to the state of the year it was built.

Condition: excellent (used), Year of construction: 2000, Dreh-Øüber Bett 320 mm Gsdpfotv Iibox Ag Deuk Dreh-Øüber Support 185 mm turning length 1000 mm Spindelbohrungs -Ø/ Aufnahme 32 mm mm spindle turning speed range (12) 85 - 2000 U/min feeds - longitudinal 0,006 - 1,77 mm/min feeds - cross 0,003 - 0,888 mm/min thread - mm pitch 0,1 - 28 mm thread - module 0,1 - 1,75 mm thread - inch 2,5 - 75 inch. voltage 400 V / 50 Hz power capacity 2,2 kW weight of the machine ca. 0.8 t dimensions of the machine ca. 1,8 x 0,8 x 1,4 m Quick-change toolholder with 5 cassettes, fixed steady, 3-jaw chuck Ø 200 mm, coolant device,

Condition: new, Year of construction: 2024, 0350 mm 196 mm 0650 mm 170 mm Gusdpfx Aswp Tpksg Dok 42 mm 7,5 kW

Condition: new, Intern VC plus Gjdpfjhw N Ntsx Ag Djuk The new dimension in the field of conventional precision lathes. High-quality, energy-efficient, precise and universally applicable in production, training and further education. It convinces through: future-oriented technology highest accuracy durability user-friendly ergonomics smallest footprint and extensive accessories. The consistent and innovative further development of the practice-proven Praktikant series is the economical and intelligent solution for your daily applications. Technical data: WORKING RANGE Center height 160 mm Swing over bed 320 mm Swing over cross slide 190 mm Center width 650 mm ROTATING SPINDLE spindle head DIN 55027/DIN ISO 702-3 size 5 spindle bore 43 mm Spindle diameter in front bearing 70 mm MAIN DRIVE drive power 60 %/100 % ED - / 8 kW speed range 25 - 5.000 min-1 Number of speeds stepless FEED RANGE Number stepless longitudinal 0.01 - 6 mm/rev plane 0.003 - 2 mm/rev THREAD CUTTING RANGE Metric thread 0.1 - 20 mm REITSTOCK quill diameter 40 mm quill stroke 85 mm Inner taper DIN 228 MK 3 ACCEPTANCE ACCURACY DIN 8605 Equipped with WEILER WTS 15 VC plus screen display - Large, clear 15" touch screen, rotatable and tiltable, resolution 1366 x 768 - Change of operating screens via swiping movements - Operating functions can be called up via App Manager - Control panels can be freely configured,

Condition: excellent (used), - Steel holder Multifix "B - Quick release collet device center height 150 mm center width 630 mm spindle bore 40 mm speed (stepless) 55 - 3000 rpm feed rate 0,05 - 0,35 mm/rev inner taper spindle / tailstock MK 5 / MK 3 turning diameter over cross slide 177 mm turning diameter over bed 340 mm power 4.45 kW dimension 1730 x 970 x 1300 mm Gedpfxehmkh Ts Ag Dsuk Weight 1250 kg

Condition: good (used), functionality: fully functional, turning diameter over cross slide: 190 mm, spindle bore: 32 mm, turning diameter: 320 mm, center height: 160 mm, turning length: 650 mm, three-jaw chuck diameter: 160 mm, For sale here is a lathe from Voest Alpine in good condition! See pictures Manufacturer: Voest Alpine Model: DA-160 Centre height: approx. 160 mm Centre width: approx. 650 mm Turning diameter over bed: approx. 320 mm Turning diameter over cross slide: approx. 190 mm Spindle bore: approx. 32 mm Three-jaw chuck diameter: approx. 160 mm Tailstock holder: MK3 Accessories included: Four-jaw chuck Ø 160 mm, Gsdpfxjwq Ehbs Ag Douk 6x steel holders, 4x pairs of turning jaws External dimensions of machine: approx. 150x90x180 cm (LxWxH) The machine can be inspected and tested at our premises. Loading option: with stapler or crane Shipping costs on request (by postcode) You will receive an invoice with VAT shown. Inspection / collection is possible by arrangement in 42855 Remscheid. Sale ex location 42855 Remscheid, free loaded. Errors in technical data and prior sale reserved.

Condition: refurbished (used), Year of construction: 2007, Universal lead and feed spindle lathe Make: WEILER Model: Primus VC Gujdpfx Ajv D Ip Njg Dok Year of manufacture: 2007 - overhauled newly painted RAL 7035 light gray Mach. no.: CK17 Center height: 140 mm Center width: 500 mm Spindle bore: 40 mm with guarantee geometric acceptance with test report Accessories: - 3-A digital display SIEMENS - Chuck protection hood with electrical protection - Drive motor braked - Quick-change tool holder base body size A - Bed stop - Covered lead and feed spindle - Chip rear wall - Pull-out chip tray - Operating instructions - Used, as seen -

Condition: used, Year of construction: 1986, turning diameter over bed:320 mm turning diameter over slide rest:198 mm turning length:650 mm total power requirement:2,2 kW Gjdpfeufud Dox Ag Djuk weight of the machine ca.:650 kg dimensions of the machine ca.:1700x1000x1700 mm :3 - Achsen - Digitalanzeige :Ø 40 mm :96 - 2500 U/min :A 2 - 5 :0,007 - 0,63 mm/U :metrisch 0,25 - 8 mm,Zoll 80 - 2 Gg/",Diametral - Pitch Gewinde 200 - 5 Dp,Modul 0,2 - 4 :MK 3 3-jaw chuck:160 mm mm :Typ B

Condition: new, Year of construction: 2025, 0330 mm 210 mm 0635 mm 167 mm 40 mm Gujdpfxswp Tfxs Ag Dok 2,2 kW

Condition: excellent (used), Lead and tension spindle lathe spindle bore 76 mm Center height 220 mm turning length 3.00 m Gsdpfxsva Ef Te Ag Deuk Multifix steel holder with 5 cassettes Coolant device Operating instructions

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: 844 12 64, turning diameter over cross slide: 215 mm, spindle bore: 40 mm, turning diameter: 380 mm, center height: 190 mm, center width: 1,250 mm, quill stroke: 120 mm, total length: 3,020 mm, total width: 950 mm, total height: 1,500 mm, spindle speed (max.): 2,800 rpm, spindle speed (min.): 14 rpm, overall weight: 1,850 kg, quill mount: MK 3, workpiece weight (max.): 300 kg, Trade show lathe, available from stock. After Trens filed for bankruptcy, we made an effort and had TOS and later Trens lathes completely overhauled. All machines were disassembled down to the last screw. Guedpfx Asv Hzqxeg Dek Here is a run-through of a general overhaul at our company: 1. Machine cleaning, disassembly of the individual machine components 2. Grinding: bed, slide, cross support, spindle, tailstock quill 3. Grinding + scraping of the upper support guideways, replacement: trapezoidal screw with nut and V-ledge 4. Scraping of the guide surfaces: spindle, slide, cross support, and tailstock to geometric positions according to the accuracy report 5. Replacement: screw with nut, V-ledge, and Multifix base body for the cross support (including 2 turning tool cartridges) 6. Complete disassembly and replacement of the necessary spare parts in the lock case, threaded housing, headstock, gear box, tailstock, cross support, and upper support 7. Installation, replacement if necessary, of racks, repair of the lead screw and feed screw 8. Complete bearing replacement in all machine assemblies 9. Complete replacement of machine plates 10. Priming of the machine, sealing, sanding, polyurethane topcoat, and painting of the machine accessories - white RAL 9003, anthracite RAL 7016 11. New control cabinet with electrical components, replacement: main motor, rapid traverse motor, hydraulic pump, cabling, and LED lighting of the work area 12. Preparation of the accuracy report and the electrical test report 13. Inspection and machine acceptance at the factory All refurbished machines have a CE certificate and a 12-month warranty. CE version: - Chuck guard with limit switch - Front chip guard mounted on slide - Rear chip guard - Lead screw and feed screw covers - Brakes after emergency stop within 2 seconds Special accessories (used): - Three-jaw lathe chuck Ø 190 mm - Four-jaw lathe chuck Ø 190 mm - Three-jaw lathe chuck Ø 240 mm - Four-jaw faceplate Ø 320 mm - Support center for bed slide - Various chuck jaws (10 pieces) - Collet set Ø 2 - 25 mm with collet chuck + drawbar - Special collet set (10 pieces) with collet chuck - 4-way tool holder

Condition: reconditioned (used), Year of construction: 1974, Universal lead and spindle lathe Make: WEILER Model: Commodor Year of manufacture: 1974 - overhauled newly painted RAL 7035 light gray Mach. no.: 0068 Center height: 180 mm Center width: 1000 mm Spindle bore: 56 mm with guarantee geometric acceptance with test report Guedpomgaddsfx Ag Dek Accessories: - 3-axis digital display FAGOR Innova 30i-T new - Chuck protection hood with electrical protection - Quick-change tool holder size B - simple bed stop - Coolant device - Operating instructions - used, as seen -

Condition: used, Year of construction: 1986, turning diameter over bed:335 mm turning diameter over slide rest:165 mm turning length:635 mm total power requirement:2,2 kW Gujdpeufud Refx Ag Dek :3 - Achsen - Digitalanzeige :Ø 40 mm :30 - 2500 U/min :D1-4 Camlock 4-jaw-chuck diameter:200 mm 3-jaw chuck:200 mm mm :MK 3 weight of the machine ca.:860 kg dimensions of the machine ca.:1700x1000x1700 mm digital readout:Heidenhain Machine is in good condition. Accesssories like tool holders etc come with the machine

Condition: new, Year of construction: 2024, 0390 mm 240 mm 1000 mm 190 mm 54 mm Godpfx Agowp Td Us Deuk 5,5 kW

Condition: new, Precision master lathe and traction spindle lathe Make: GDW Model: LZ 280 VS comfortline Condition: new machine with infinitely variable speed control and infinitely variable feed control to the highest safety standard tip height: 165 mm Centre distance: 670 mm Spindle bore: 43 mm standard equipped with: The basic price already includes the latest display generation "comfortline", which contains many innovations and simplicity: - 9'' TFT colour screen - Technology memory for 99 tools - Oriented spindle stop via teach-in button - Input of constant speed or constant cutting speed (V = c) - Speed limitation selectable - Error and status display in plain text - Feed rate and thread pitch input by means of image-supported masks - Thread cutting therefore does not require any Change wheels more exchanged or even be purchased in addition to all the usual to be able to cut threads! is still included in the standard: - LED machine light, integrated in machine casing - Quick-change tool holder size A with turning tool holder Gusdpfx Aocunqgsg Djk - Leadscrew disconnection with key - Braking device for main drive - Feed protection hood movable with limit switch monitoring - Spaeneschutz rear wall removable - Spray guard cover movable - Spa tub can be pulled out - Single bed stop (fixed stop lengthwise) - centralized lubrication - Reducing sleeve for main spindle internal taper ME 50/MK 3 - Protective flange for spindle

Condition: new, Year of construction: 2025, 0330 mm Gujdpjwp Tbmjfx Ag Dek 210 mm 0635 mm 167 mm 40 mm 2,2 kW spindle turning speed - stepless 30-3000 U/min

Condition: new, Center lathe and feed spindle lathe Make: ROMI Model: T240 x 1000 Condition: New machine Guedpsb Suakefx Ag Djk centre height: 220 mm Center width: 1.000 mm standard equipped with: - 3-axis digital display FAGOR Innova 30i-T - cooling device - Bed stop for automatic switch-off - Quick change tool holder base body size B - Instruction manual

Condition: new, Precision master lathe and draw spindle lathe Make: GDW Model: LZ 280 VS-G basicline Condition: new machine with infinitely variable feed control to the highest safety standard Centre height: 165 mm Centre distance: 670 mm Spindle bore: 43 mm standard equipped with: GDW control panel with feed potentiometer - Display of the travel direction - Display of spindle speeds - Teach-in for traverse path during thread cutting - Input of feed and thread pitches - Thread pitches Metric, inch, module, DP GDW 3-axis positioning display - 6" TFT colour display - Radius / diameter display - Tool memory for 100 tools - Changeover mm / inch - Axle coupling Z / Zo - cone calculation - pocket calculators - Graphical input help - USB port - Automatic standby mode is still included in the standard: Gjdpjfbmlijfx Ag Djuk - LED machine light, integrated in machine casing - Quick-change tool holder size A with turning tool holder - Lead screw disconnection with key - Braking device for main drive - chuck guard movable with limit switch monitoring - Removable chip guard rear panel - Spray guard cover movable - chip tray can be pulled out - Single bed stop (fixed stop lengthwise) - centralized lubrication - Reducing sleeve for main spindle internal taper ME 50/MK 3 - Protective flange for spindle head DIN 55027-5 - 2 fixed centering points DIN 806-MK 3 - Set of operating tools with tool bag, set of keys, oil press - 5 Spare shear pins - 2 Operating instructions