Cenventional Lathe

PADOVANI Labor 180 S

Condition: used, turning diameter over bed / mm turning diameter over slide rest / mm turning length / mm total power requirement / kW weight of the machine ca. / t required space / m Conventional lathe with copying attachment and extensive accessories Turning diameter over cross slide: 240 mm Spindle bore: 52 mm Turning diameter: 360 mm Center height: 180 mm Turning length: 1,000 mm Overall length: 2,200 mm Overall width: 750 mm Overall height: 1,400 mm Maximum spindle speed: Kjdpfov Rgzwjx Ah Nsdg 1,750 rpm Min. spindle speed: 60 rpm Total weight: 1,800 kg All technical specifications are subject to change without notice. Deviations may occur depending on the year of manufacture, model, or condition of the machine. We assume no liability for the accuracy or completeness of this information.

Condition: excellent (used), Control : D.Electron Z 32 Ksdpjd Sitkofx Ah Nsdg centre height 220 mm Centre distance 1000 mm turning Ø over bed 440 mm turning diameter over slide 245 mm Travel -Z axis 750 mm width of lathe bed 320 mm spindle mounting CL 6" spindle bore 62 mm spindle speeds 0 - 2000 rpm rapid traverse X/Z 7 m/min quill travel by hand 200 mm quill diameter 80 mm quill mounting MK 4

Condition: ready for operation (used), Weiler Commodor lathe with leadscrew and feed shaft for sale. Manufacturer: Weiler Type: Commodor Condition: used, good, still in production Scope of delivery: - Multifix B tool holder - Three-jaw chuck Kdodpfx Asxladwsh Nog

Condition: excellent (used), Year of construction: 1993, max. edge thickness coils 0.2 - 3 mm max. edge thickness solid strips15 mm feed speed 12/ 18 m/min glue plot heating time approx. 6 min autom. strip magazine coil magazine granulate heating pot flush trimming unit radius trimming unit operating panel extendable work piece support noice cancelation hood machine length 3800 mm Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. Kedjfbr S Repfx Ah Njdg • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: good (used), turning diameter over cross slide: 380 mm, spindle bore: 70 mm, turning diameter: 640 mm, turning diameter over bed slide: 900 mm, Characteristics: Length between points: 2.000mm Diameter admitted on bed: 640mm Diameter admitted on carriage: 380mm Diameter admitted on neckline: 900mm Shank pitch: 70mm Kedpfx Ahoudh Sls Njdg Includes: 400mm 3-jaw chuck 390mm 4 independent jaw chuck Open steady rest and closed steady rest Quick-change toolholder with 4 tool holders.

Year of construction: 2002, condition: good (used), Built in: 2002 Working hours: 10.688 thsd.h Size: max 365 x 305 mm min 105 x 115 mm Product thickness: max 15 mm min 6 mm Speed: max 9.000 c/h min 2.000 c/h Equipment: gathering chain & feeder • 10 station gathering track & chain • 10 automatic feeders Kdjdpfx Aod R Sansh Nsg • 1 cover folder feeder 1528 stitching unit • wire unwind device • stitch control • 2 stitching heads HK 75 three knife trimmer • three knife trimmer 1522 knives • 2 sets of knives

Condition: good (used), These VDI 50 driven tools listed are for a SAUTER tool changer and are in good condition and fully functional. They have been used on a GILDEMEISTER CTX 600 CNC lathe. 6 x driven tools, straight design, made by NACKE + WTO, VDI 50 for tool turret made by SAUTER: Item no.: XVI 24275 Kodjbql S Hopfx Ah Nodg 1 drilling/milling tool, straight design, manufacturer: NACKE, VDI 50 mm, similar to DIN 69880, no. 40.5040 / 80 96 / 027.1, collet Ø 25 mm, SAUTER drive B 20 x 17 DIN 5482 Price: € 545.00 plus VAT. VAT Item no.: XVI 24277 1 drilling milling tool, straight version, manufacturer: NACKE, VDI 50 mm, similar to DIN 69880, no. 40.5040 / 80 96 / 027.3, collet Ø 25 mm, SAUTER drive B 20 x 17 DIN 5482 Price: € 400.00 plus statutory VAT Item no.: XVI 2687 1 drilling milling tool, straight version, manufacturer: WTO, VDI 50 mm, similar to DIN 69880, collet Ø 32 mm, SAUTER drive B 20 x 17 DIN 5482 Price: € 650.00 plus statutory VAT VAT Item no.: XVI 2687 1 drilling and milling tool, straight design, manufacturer: WTO, VDI 50 mm, similar to DIN 69880, collet Ø 32 mm, SAUTER drive B 20 x 17 DIN 5482 Price: € 650.00 plus statutory VAT Item no.: XVI 2687 1 drilling and milling tool, straight design, manufacturer: WTO, VDI 50 mm, similar to DIN 69880, collet Ø 32 mm, SAUTER drive B 20 x 17 DIN 5482 Price: € 650.00 plus statutory VAT VAT Item no.: XVI 2687 1 drilling milling tool, straight design, manufacturer: WTO, VDI 50 mm, similar to DIN 69880, collet Ø 32 mm, SAUTER drive B 20 x 17 DIN 5482 Price: € 650.00 plus statutory VAT Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: used, Year of construction: 1959, turning diameter over bed 460 mm turning diameter over slide rest 280 mm Kdodpoxpi A Defx Ah Neg turning length 1000 mm centre height 230 mm 720 mm spindle bore 53 mm spindle turning speed range 28 - 1250 U/min total power requirement 4,0 kW weight of the machine ca. 1,8 t dimensions of the machine ca. 2,4 x 1,4 x 1,75 mm Lathes with: - Digital display - Quick-release tool post - 3-jaw chucks (200 mm and 160 mm) - Chip tray - Centering center

Condition: as good as new (ex-display), Year of construction: 2025, Center height 230 mm Center distance 1500 mm Swing diameter over bed 465 mm Swivel diameter over cross slide 270 mm Swivel diameter in the bed bridge 690 mm Bed bridge length 240 mm Spindle bore diameter 58 mm Spindle face CAMLOCK D1-6 Spindle bore taper Morse 6 Speed ​​range 25 – 2000 rpm (12 speeds) Tailstock taper Morse 4 Tailstock sleeve travel 128 mm Motor power 5.5 kW Machine weight 1720 kg Machine dimensions 2700 x 1080 x 1370 mm Accessories - 3 axis DRO - 3 jaw chuck - 4 jaw chuck - Faceplate - Tailstock - Cooling unit - 4-.fold toolholder - Splash guard - Chuck protection - Manual The lathe is in factory brand new condition. Showroom model. It is with 12 months of warranty in Hungary. Kdsdpfxexbzqqj Ah Njg

Condition: new, Year of construction: 2024, That’s a double-productive CNC laser machine. There's no magic, just two laser heads. It has a through table, allowing you to cut materials and rolls of fabric of any length. This model also has a waste collection container that will make the work much more pleasing. Kdsdjrzrg Dopfx Ah Neg Two laser heads function simultaneously at a minimum distance of 130 mm apart. Each has its own 100-120W laser tube, making it possible to work at fast rates. Wattsan 1610 works with wood, plywood, cardboard, paper, plexiglass, acrylic, plastic, rubber, leather, stone, etc. You can give our managers a call for additional details! Wattsan 1610 Duos ST characteristics Working area: 1600x1000 mm Laser power: 100-130 W Working table lowering depth: 40 mm Positioning precision: 0,03 mm Machine size: 1600 x 2200 x 670 mm + if it is on wheels 315 mm Packing size: 2300 x 1750 x 810 mm Weight: 457 kg Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our company you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.