Used Automatic Turning Lathe for sale (28,969)

Condition: good (used), Year of construction: 2003, functionality: fully functional, Machine-Details : Stock-No. 1022-2405 Type of machine Turning Automatic Lathe - swiss lathe Make CITIZEN Type L32 VII Year of manufacture 2003/2005 Type of control CNC Storage location Monheim (Germany) Country of origin Japan Delivery time Immediately Freight basis Ex warehouse, loaded on truck Technical details : working diameter max. 32 mm spindle passage 36 mm turning length 320 mm Control MITSUBISHI MELDAS 635LC travel max. (X1) 108 mm travel max. (Y1) 275 mm travel max. (Z1) 325 mm travel max. (X3) 238 mm travel max. (Z3) 410 mm main spindle speeds: 200 - 8000 U/min c-axis 0,001° deg. Subspindle spindle speeds 200 - 7000 U/min c-axis 0,001° deg. rapid traverse 20 m/min main drive 3,7 / 5,5 kW Subspindle motor 1,5 / 2,2 kW dimensions of machine 2,77 x 1,24 x 1,79 m weight of the machine ca. 2850 kg Additional information : CNC Swiss-Type Lathe First put into operation December 2005 The machine was used for a single shift and is in good condition with no maintenance backlog. Equipment: FMB Turbo 5-42/3200C bar loader, built 2004 High-pressure pump Many collet chucks for main spindle Various collets Drive unit for synchronously driven guide bush Synchronously driven guide bush Drive unit for transversely driven spindle on linear support Pick-up spindle Collet chuck for pick-up spindle Blow-out device for pick-up spindle Five fixed tool holders on the rear Workpiece removal device Coolant tank Central lubrication system Door lock Ejection device for workpieces with through holes Gkelhcdwsx A A R Ijvef Machine documentation The machine will be sold without tools and extraction system.

Year of construction: 2007, operating hours: 24,593 h, condition: used, machine/vehicle number: 5010481, Max. turning diameter: 340 mm, max. turning length: 750 mm, max. spindle speed: 4,000 rpm, chip conveyor, TX 8I control system, 12-position turret Golhcjx Akmqsdwvjkf

Condition: not inspected (used), Year of construction: 1989, We are offering the following as part of an insolvency sale: 2 x CNC lathes (1 x with sub-spindle, 1 x with lower turret), used + Bar feeder + Accessories 1. CNC lathe with sub-spindle Make: MIYANO Model: BNC 34-S Year: 1989 Control: Fanuc 0-T - HYDROBAR bar feeder - 2 x collet chucks - 1 x 3-jaw chuck 2. CNC lathe with 2 x turrets Make: MIYANO Model: JNC 45-T Year: 1989 Control: Fanuc 0-T - HYDROBAR bar feeder - 1 x collet chuck - 1 x 3-jaw chuck 3. Accessories - Approx. 65 x collets - Approx. 40 x jaw sets Gkjlsx Ed A Djhcdwvjf - Various tool holders + tools - Documentation The machines are untested, but they were in operation until decommissioning. Sale is ex-location; loading can be provided at extra cost.

Condition: excellent (used), Year of construction: 2018, Control Fanuc 32I-B, bar capacity 32mm, Gkslhcdsw Rct Hswvof maximum cutting diameter 32mm, maximum cutting length 310mm, maximum drilling diameter 13mm, maximum tapping capacity M12, milling speed 5,000rpm, spindle speed 7,000rpm, Sub spindle C axis 0.001 degree, FMB Turbo 3-36/3200 barfeed, number of controlled axis Z, ZB, X, XB, C1, C2, Y. swarf conveyor,

Condition: good (used), Star SR-20 Type 530G CNC Sliding Head Lathe with Fanuc Series 16-T Control & FMB 'Turbo 3-26/4200' Automatic Bar Feeder Gkolhex Ah R Hecdwvjf 7-Axis. Ø20mm Lathe Spindle Turning Capacity. Spindle Speeds Up To 8,000rpm. (3) Driven Heads. S/No. 010944. FMB 'Turbo 3-26/4200' Automatic Bar Feeder. Bar Capacity Ø3mm-26mm x 4,200mm Long. With: Coolant Tank. Parts Catcher. Cromar Chip & Swarf Conveyor. Mobile Tipping Swarf Bin. Assorted Collets. Power Supply 415 Volt 3-Phase. Weight of Lathe Approx 1,800kg.

Condition: used, Year of construction: 2011, bar material dia. 32 mm spindle passage 38 mm turning length 320 mm turning speeds 8000 U/min Gelhsw Ed Tfecdwvekf c-axis 0,001 ° Grad gripping station 32 turning length 150 mm turning speeds 8000 U/min c-axis 0,001 ° Grad number of tools 4+7+6+10 =27 number of milling stations 4+4 control Mitsubishi M70 Number of axles 5+2x C Achse 7 St. chip conveyor ja/yes LNS total power requirement 7,5/5,5 kW weight of the machine ca. 3300 kg dimensions of the machine ca. 2,5 x 1,2 x 1,82 plus FMB m swiss type machine Citizen A32-VIIPL,built 2011, with Barloader FMB Turbo 3-36, Excellent conditions. Main spinle motor and spindle bearing are new. Attachment: all comes with. It is the only one in the production.

Condition: not inspected (used), Year of construction: 2021, functionality: unexamined, Star SR-32J sliding head CNC lathes - 4 available - see descriptions below Star SR-32J sliding head CNC lathe Serial no: 3174 (09/2015) with Fanuc Series 32i-Model B control, Filtermist extraction, swarf conveyor and chip hopper Hydrajet GP20-2000 high pressure coolant system Serial no: 698 (07/2016) FMB Turbo 3-36/4200/A bar feed Serial no: 48-260915 / R:686664 (2008) Star SR-32J II type B sliding head CNC lathe Serial no: 0700 (12/2020) with Fanuc Series 32i-Model B CNC control, Filtermist extraction Hydrajet UB20-2000-6TF high pressure coolant system Serial no: 1461 (2021) FMB Turbo 3-36/4200/A bar feed Gelhcdwewxb Adovekf Serial no: 61-264515 / R:1824023 (2021) Star SR-32J II type A sliding head CNC lathe Serial no: 0714 (02/2021) with Fanuc Series 32i-Model B CNC control, Filtermist extraction, swarf conveyor and chip hopper Hydrajet UB20-2000-5F high pressure coolant system Serial no: 1490 (04/2021) FMB Turbo 3-36/4200/A bar feed Serial no: 61-264572 / R:1843360 (2021)

Condition: used, As-new CNC chuck lathe TAIKAN model HPT 08-380 Serial No. 2015122 Year of manufacture: 2017 CNC path control: SIEMENS Sinumerik 828 D Basic Maximum turning length without chuck: 350 mm Maximum turning length with chuck: approx. 300 mm Turning diameter (nominal): 250 mm Swing diameter over bed: 500 mm Travel of Z-axis: 385 mm Travel of X-axis: 200 mm Feed rate (X + Z): 1–8000 mm/sec. Rapid traverse (X): 30,000 mm/sec. Rapid traverse (Z): 36,000 mm/sec. Spindle speed, max.: 4500 rpm Spindle bore: 66 mm Draw tube bore: 50 mm Spindle nose: presumably A2-6 Workpiece weight incl. chuck: max. 200 kg Spindle drive motor power: 11 kW Power supply: 400 Volt, 50 Hz Gelhcowz Rifsdwvekf - Electronic handwheel - USB, LAN data interface + CF card - Drum turret with 12 tool stations - Hydraulic 3-jaw power chuck, Ø 215 mm - Infinitely variable spindle speed - Coolant unit - Chip conveyor with rear discharge + basic chip cart Machine footprint with chip conveyor: Length 2200 mm x Depth 2750 mm x Height 1700 mm Machine space requirement: Length 2200 mm x Depth 1750 mm x Height 1700 mm Chip conveyor dimensions: Length 2700 mm x Width 600 mm x Height 1400 mm Weight: 3.5 t Very good condition – as new Machine comes from a showroom and has only a few operating hours.

Condition: not inspected (used), Year of construction: 1989, We are offering the following as part of an insolvency sale: 2 x CNC lathes (1 x with sub-spindle, 1 x with lower turret), used + Bar feeder + Accessories 1. CNC lathe with sub-spindle Make: MIYANO Gkjlex Edz Tshcdwvjf Model: BNC 34-S Year: 1989 Control: Fanuc 0-T - HYDROBAR bar feeder - 2 x collet chucks - 1 x 3-jaw chuck 2. CNC lathe with 2 x turrets Make: MIYANO Model: JNC 45-T Year: 1989 Control: Fanuc 0-T - HYDROBAR bar feeder - 1 x collet chuck - 1 x 3-jaw chuck 3. Accessories - Approx. 65 x collets - Approx. 40 x jaw sets - Various tool holders + tools - Documentation The machines are untested, but they were in operation until decommissioning. Sale is ex-location; loading can be provided at extra cost.

Condition: used, Year of construction: 2019, Technical details: bar material dia.: 38 mm turning length: 350 mm turning speeds: 7.000 / 7.000 U/min number of tools: 30 (3 x 10) driven tools: ja / yes control: FANUC 31i-B5 rapid traverse: 30 m/min total power requirement: 10,5 kVA weight of the machine ca.: 6,5 t dimensions of the machine ca.: 2,50 x 1,45 x 1,75 plus Lademagazin m work piece power: 4 kW toolpiece turning speed range: 5.700 1/min Accerories Gkslhemu Rtuecdwvsf main spindle power 11 kW sub spindle power 7,5 kW CNC sliding headstock machine STAR ST 38, 3 turrets, 12 CNC Axis (X1/Z1/Y1/C1/X2/Z2/Y2/YA2/C2/X3/Z3/Y3, Fireextinguisher KRAFT und BAUER FB 703, partscatcher and conveyor belt (for long parts), LTA oilmist suction, chiller for oil, machining with oil as coolant, reading hours: approx. 14.500 hours "machine on", approx. 4.100 hours "machining" *

Condition: new, Year of construction: 2022, functionality: fully functional, TAKAMAZ CNC Compact loader FC60 Lathe with automatic loader unloader quickest loading system in the world Gkolom E I D Hjhcdwvsf loading time new part 2,8 sec. loading cap. till 60 mm diameter. loading lenght max 50 mm max weight 1 kg per side loading feed 120 m min include part turning for loading Fanuc Control full warranty 2 year Lathe spec. Spindle motor 7,5/5,5 kw turning diameter max 180 mm turning lenght 240 mm bar cap. 35 mm collet chuck 173E till 40 mm diameter spindle nose A2-5 spindle speed 4500 rpm tool pos 8 stations tool shank 20x20 mm boring holder 25 mm diameter rapid speed X/Z 18/24 meter machine dimension 1,36 x 1,37 meter height 1,7 meter weight 2,7 ton total power 14 KVA installation and training not included. ( price depend on loacation and on request)

Condition: used, Year of construction: 2006, bar material dia. 20 mm spindle passage 22 mm turning length 205 mm Gelhcdexukr Dswvokf Control Siemens Yaskawa turning speeds 500-10.000 U/min c-axis 0,001 ° gripping station 20 mm turning length 30 mm positive location each 0,001 ° Number of tools 10 fest / fix St. total power requirement 2,2/3,7 kW weight of the machine ca. 3,5 t dimensions of the machine ca. 2,6 x 1,2 x 1,8 +FMB m CNC sliding head lathe Star Ecas 20, built in 2006, with FMB minmag 18 loading magazine, in good condition, from the medical technology sector. Two machines of the same type and year of manufacture are available.

Condition: used, Year of construction: 2008, turning length: 300 mm, spindle speed (max.): 8,000 rpm, spindle speed (min.): 8,000 rpm, turning diameter: 32 mm, Machine in production. Equipped with: - Knoll high pressure pumps up to 60 bars - Collant cooling device - swarf coveyour - FMB bar feeder - live tools Gsloxwmidjhcdwvokf - 2x C axis We can load machine on your truck free of charge.

Condition: like new (used), Injector Model: BI 204 C Manufacturer: Inject star Stainless steel Gjlhexruinecdwvskf Power: 9kW Voltage: 3 x 400V/ 50Hz

Condition: excellent (used), Year of construction: 2007, turning diameter over bed 32 mm spindle passage 32 mm turning length 125 mm Control YASKAWA SIEMENS 840 DI V2 spindle turning speed range 7000 U/min workpiece length - max. 150 mm clamping diameter 32 mm feed 0 - 2000 mm/min weight of the machine ca. 5,7 t dimensions of the machine ca. 10,5 x 2 x 1,9 m The sliding headstock automatic lathe is in good condition and ready for immediate use. with tool holders and spare parts. Gkelhexq Hk Uscdwvsf >> Two identical STAR 32T sliding headstock lathes are available

Condition: used, Year of construction: 2012, Technical details: turning diameter over bed: 20 mm Gjlovivx Nehcdwvjkf spindle passage: 3-20 mm turning length: 250 mm control: FANUC 31 i-A main-spindle speed: 10.000 1/min subspindle speed: 10.000 1/min Main spindle capacity: 3,7 kW subspindle power: 2,2 kW number of tools: 35 weight of the machine ca.: 3,3 t dimensions of the machine ca.: 2,11 x 1,2 x 1,89 m CNC sliding headstock turning/milling centre with B-axis Control system: Fanuc 31i-A Machining length: max. 250 mm Number of controlled axes: 7 axes and max. 5 axes simultaneously B-axis: 0°-130° freely programmable Rod passage: Ø 3 mm to max. Ø 20 mm Drive power main spindle: 3.7 kW Drive power counter spindle: 2.2 kW Main spindle speed: 10,000 rpm Counter spindle speed: 10,000 rpm C-axis: Main and counter spindle Number of linear supports: 2 pieces Total number of tools: 35 pieces Dimensions (LxWxH) in mm: 2,110×1,200×1,885 Weight: 3,300 kg Conversion from long to short turning Deep hole drilling stations NAKANISHI high-speed spindle Rear slide with Y-axis Cross drilling rear side Chip conveyor Fire extinguishing system FMB bar loader Minimag 20, year 2012 Approx. 7.200 working hours *

Condition: good (used), Year of construction: 2001, movable headstock 10 axes Spindle speed 8,000 rpm C-axis TOOL CARRIER (X1-Y1 / X2-Y2) - 2 independent cross slides with 2x5 tools Gkjlhcdwsw Exk Ssvef - Drive unit 8,000 rpm for up to 4 driven tools on X2-Y2 FRONT UNIT (X3-Z3) - Cross slide with 4 positions SUB-SPINDLE (X4-Y4-Z4) - Speed 6,000 rpm - Slide with 3 independent axes SUB OPERATIONS - Holder with 7 positions (4 end and 3 cross) Workpiece feeder Coolant pump 20 bar KNOLL chip conveyor Bar feeder ROBOBAR 532, 3m bars

Condition: used, Year of construction: 1990, Technical details: spindle passage: 23 mm z-axis: 150 mm turning length: 150 mm stroke: x+z Achse / Axis/eje/eixo/os = 30 mm facing movement (x-axis): 30 mm longitudinal traverse (z-axis): 30 mm control: Num 760T spindle turning speed - continuous: U/min feed speed: x/y: 5 mm/min feed speed: z: 10 mm/min tool turret: 2 Stück/pcs mit je/each 6 tools operating pressure: max. 45 bar total power requirement: 8,0 kW weight of the machine ca.: 2,2 t dimension machine xH: 2,45x1,3x2,2 m dimensions of the bar loader L-W-H: 4,65x0,5x1,3 m techn. details: Gkslhceu Iwyvodwvef - bar clamping hydraulic -automatic workpiece discharge (via catch basket) - 2 turrets with each 6 tool tapers - coolant device - control NUM 760 (size: L:1,0xW0,8mxH:1,56m) Zubehör: - bar loader magazine make IEMCA type CS 112/31 accessories: -24 div. tool tapers - device tool Sylvac system ( size:L:0,58xW:0,5xH:0,43m) *

Condition: excellent (used), Year of construction: 2018, operating hours: 3,590 h, functionality: fully functional, spindle motor power: 15,000 W, turning length: 100 mm, turning diameter over cross slide: 51 mm, spindle speed (max.): 5,000 rpm, turning diameter: 51 mm, spindle bore: 51 mm, overall weight: 5,300 kg, rotational speed (max.): 5,000 rpm, type of input current: three-phase, bar passage: 51 mm, feed length X-axis: 165 mm, feed length Y-axis: 80 mm, feed length Z-axis: 590 mm, total width: 1,560 mm, total length: 2,840 mm, total height: 1,700 mm, feed rate X-axis: 20 m/min, feed rate Y-axis: 12 m/min, feed rate Z-axis: 20 m/min, bar diameter (max.): 51 mm, turning diameter over bed slide: 51 mm, turning diameter over top slide: 51 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 20 m/min, input voltage: 400 V, travel distance X-axis: 165 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 590 mm, power of the servo motor: 15,000 W, Equipment: documentation/manual, rotational speed infinitely variable, 2018 Citizen Miyano BNJ-51 CNC Automatic Lathe – Excellent Condition & Low Hours 2018 Citizen Miyano BNJ-51 Fixed Headstock CNC Automatic Lathe, complete with Iemca Kid 80 Barfeed and full tooling package. This high-precision twin-spindle lathe has only 3,590 cutting hours and comes from a clean, well-maintained production environment. Perfect for precision component manufacturing in medical, aerospace, and automotive industries. Machine Overview Make/Model: Citizen Miyano BNJ-51 Machine Type: Fixed Headstock Type CNC Automatic Lathe Year: 2018 Control System: Fanuc Series Oi-TF Cutting Hours: 3,590 hrs Condition: Excellent – low hours, production-ready Included Equipment & Features Iemca Kid 80 Barfeed Parts Conveyor Swarf Conveyor Parts Catcher Mirror Turning Capability Collet Chuck on Spindle 1 Collet Chuck on Spindle 2 6” 3-Jaw Hydraulic Chuck 8 x Driven Toolholders Full Set of Static Toolholders Technical Specifications Machining Capacities Max. Machining Length: 100 mm Standard Turning Diameter (Spindle 1): 51 mm Standard Turning Diameter (Spindle 2): 42 mm Chuck Size Spindle 1: 6" Chuck Size Spindle 2: 5" Number of Spindles: 2 Spindle Performance Spindle 1 Speed Range: 5,000 rpm Spindle 2 Speed Range: 5,000 rpm Draw Tube ID (Spindle 1): 52 mm Draw Tube ID (Spindle 2): 43 mm Spindle 1 Drive Motor: 15 kW Spindle 2 Drive Motor: 7.5 kW Turrets & Tooling Number of Turrets: 2 Turret 1: 12-Station (Driven Tool Capable) Turret 2: 8-Station (Driven Tool Capable) Square Tool Shank: 20 mm Drill Shank Diameter: 25 mm Driven Tool Speed – Turret 1: 6,000 rpm Driven Tool Speed – Turret 2: 3,000 rpm Driven Tool Motor (T1): 2.2 kW Driven Tool Motor (T2): 0.75 kW Axis Travels X1 Travel: 165 mm Z1 Travel: 246 mm Y1 Travel: 80 mm (+/- 40 mm) X2 Travel: 85 mm Z2 Travel: 590 mm Rapid Feeds (X1, Z1, X2, Z2): 20 m/min Rapid Feeds (Y1): 12 m/min Power & Electrical Power Capacity: 33 kVA Machine Dimensions (W x D x H): 2840 x 1560 x 1700 mm Machine Weight: 5,300 kg Golhcdextfqrowvokf Highlights Low Cutting Hours: Only 3,590 hrs of light use Full Barfeed & Chip Handling Package – ready for continuous production Twin Spindle / Twin Turret Configuration for maximum productivity Driven Tooling for milling, drilling, and complex part geometry Fanuc Oi-TF Control – industry standard reliability and precision Ideal for precision turned parts in small to medium batch runs Applications This machine is ideal for medical components, automotive fittings, aerospace connectors, hydraulic parts, and general precision turned parts. The combination of twin turrets, high-speed spindles, and driven tooling allows for efficient multi-axis machining with minimal setup time and high repeat accuracy. Condition & Availability The Citizen Miyano BNJ-51 is in excellent mechanical and cosmetic condition and available for immediate inspection or delivery. Citizen Miyano BNJ-51, Used Citizen CNC Lathe, Used Miyano Lathe Ireland, CNC Automatic Lathe for Sale, Citizen BNJ Lathe, Twin Spindle CNC Turning Center, Used CNC Machines Ireland, Fanuc CNC Lathe, Barfeed CNC Lathe, Used Precision Lathes, Citizen Miyano BNJ Series, CNC Turning Machines for Sale Europe, Fixed Headstock CNC Lathe

Condition: used, Year of construction: 1998, max. working diameter 20 mm max. working lenght 320 mm bore diameter 10 mm passage of spindle 24 mm Spindle speed 200 - 8.100 min -1 control MITSUBISHI Turning Automatic Lathe - swiss lathe | CITIZEN - M-20 equipped with bar feeder. Gkslhcdsvnwf Iowvof The machine is in very good condition. A machine video from the production plant will be shared on request. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: M20 | M 20

Condition: used, Year of construction: 2019, bar material dia. 32/38 mm spindle passage 44 mm turning length 320 mm turning speeds 200-8000 U/min c-axis 0,001 Grad gripping station 32/38 mm turning length 120 mm turning speeds 200-8000 U/min c-axis 0,001 0 number of tools 13 fix number of milling stations 4+5 driven control Mitsubishi Meldas Number of axles 5+2 St. total power requirement 7,5 kW weight of the machine ca. 2850 kg dimensions of the machine ca. 2,5 x 1,4 x 1,75 + Irco m CNC sliding headstock machine Citizen L32-1M8, built 01/2019 with barloader FMB turbo 3-36 equipped with swar- & coolant tank, fire distiguisher. ON/OFF 23.471h Running hours 21.495h GBL function (standard) LFV function: no Gjleuwv Tgehcdwvekf

Condition: used, Year of construction: 2001, Technical details: bar material dia.: 20 mm turning length: 205 mm turning speeds: 10.000 / 8.000 U/min Gkslhcdevivyaowvof number of tools: 19 driven tools: ja / yes control: FANUC 18i-T CNC sliding headstock machine, subspindle,7 axes (X/Z/Y/C1/X1/Z1(C2), Rod Ø max. 20 mm, Turning length max. 205 mm, Main spindle, max. speed 10,000 rpm, C-axis 0.001 degrees, Counter spindle with collet chuck, max. speed 8,000 rpm, C-axis, Tool holder for a total of 19 tools (linear tool holder, front attachment, rear machining), Parts conveyor belt, Standard guide bushing unit Loading magazine FMB turbo 3-26/3200 / A /, year 2001 Coolant used in the machine: oil. Extinguishing system Kraft & Bauer estimated hours: 50.000h "machine on" and 30.000h "spindle on" *

Condition: like new (used), Year of construction: 2019, operating hours: 1,256 h, functionality: fully functional, machine/vehicle number: HTS.XD.26.A1.0133, Machine Name - Dugard Hanwha Machine Model - XD26H S.N A1.0133 Y.OM 2019 Description - Fanuc i Series control Max Turning diameter 26mm 8000 RPM main and sub spindle Upto 20 tools can be used LNS Alpha 312 Barfeed Gkolhcdowxl Rljwvof

Condition: used, Year of construction: 2000, max. working diameter 20 mm max. working lenght 320 mm passage of spindle 24 mm Spindle speed 200 - 10.000 min -1 control MITSUBISHI Turning Automatic Lathe - swiss lathe | CITIZEN - M-20 equipped with bar feeder. Gslhcdjvnwfzswvekf The machine is in very good condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: M20 | M 20

Condition: used, Year of construction: 2003, Technical details: bar material dia.: 13 mm turning length: 205 mm turning speeds: 12.000 / 12.000 U/min number of tools: 29 driven tools: ja / yes 19 control: FANUC 16 iT total power requirement: 9 kVA Golhovivygscdwvekf weight of the machine ca.: 1,7 t dimensions of the machine ca.: 2,7 x 1,4 x 1,7 m CNC sliding headstock machine, subspindle,Year 2003 (0450) FANUC 16i-T control with 9 axes, 9 axes (X / C1 / Y / E / B / A / X / c2), Main spindle, speed max. 12,000 rpm, C-axis, Counter spindle with collet, speed max. 12,000 rpm, C-axis, 4-fold tool holder 3 transverse drilling apparatuses Revolver with 8 stations various additional tool holders, quills, Extinguishing system Kraft and Bauer High pressure system SF-Systeme Büchele /SHD 150/ 150bar / 2 x 40 um /3 valves, Parts conveyor belt Manuals Operation/Programming/Electrical/Spare Parts Operating tool machine Up to 29 turning tools and up to 19 attachments possible 9.0KVA Tank capacity 170L Loading magazine FMB Turbo 2-16 /3200/A / from Ø2- Ø20 mm / Machine coolant use: Oil Dimensions machine: approx. 2700 x 1400 x 1700 [mm]. Weight machine: approx. 1700 [kg] Dimensions of loading magazine: approx. 4300 x 600 x 1800 [mm]. Weight of loading magazine: approx. 700 [kg]. Dimensions of peripheral HD system: approx. 1500 x 500 x 1000 [mm] Weight of HD system peripherals: approx. 250 [kg] Dimensions peripherals & accessories: approx. 1200 x 800 x 1000 [mm] Weight of peripherals & accessories: approx. 200 [kg] Dimensions of peripherals & accessories: approx. 1200 x 800 x 1000 [mm] Weight of peripherals & accessories: approx. 200 [kg] *