Used Weiler 220 for sale (183)

Condition: used, L + Z Lathe WEILER Model Praktikant 800R Machine No. 3309 Year of manufacture: 1984 Centers distance: 800 mm Isdpfx Aoyg Rfiohvshw Swing over bed: 280 mm Swing over cross slide: 160 mm Center height over bed: 140 mm Center height over cross slide: 80 mm Spindle bore: 36 mm Feeds: longitudinal and cross Chuck mounting: Short taper DIN 55027 size 5, 4x M10 Tailstock taper: MT 3 Tailstock quill travel: 90 mm Spindle speed: 42 – 2000 rpm Drive power: 1 / 1.6 kW Electrical connection: 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and 8 gear steps - 3-jaw scroll chuck BILSING Ø 160 mm with 1 set of stepped jaws and 1 set of soft jaws - MULTIFIX quick-change toolpost size A with 3 exchangeable toolholders - Live center - Emergency stop - Folding chuck guard - Coolant system - Operating manual with electrical schematic - Very low operating hours Required space (L x W x H): 1900 x 700 x 1300 mm Weight: 600 kg Very good condition

Condition: good (used), Centre height: 125 mm Ijdpfx Aheyu R H Nsvohw Distance between centres: 800 mm Max. turning diameter over bed/over slide: 280/245 mm Spindle mount, thread according to DIN 800 Spindle bore: 24 mm Infinitely variable spindle speeds: 26 - 2000 rpm 36 longitudinal feeds: 0.019 - 0.528 mm Metric thread pitches: 0.25 - 6 mm 44 inch threads: 4 - 112 TPI Electrical connection: 380 V, 0.7/1.4 kW Required space: Approx. weight: 500 kg

Condition: used, Year of construction: 2024, controller manufacturer: Heidenhain, controller model: ND 7013, _____ Description: Year of manuf. : 2024 Control : Heidenhain ND 7013 Spindle bores : 71 mm Turning diam. : 345 mm Turning length : 1500 mm Technical data Center height :260 mm Swing diameter over bed :535 mm Swing diameter over facing slide :345 mm Center width :1.500 mm Spindle head :DIN 55027/DIN ISO 702-3 size 6 Spindle bore :71 mm Spindle diameter in front bearing :100 mm Drive power :7.5 kW Speed range :33 - 1,500 min-1 Metric thread :0.5 - 28 mm Quill diameter :65 mm Quill stroke :120 mm Internal taper :DIN 228 MK 4 Standard equipment :- Roller conveyor cover for leading and traction spindle :- Chip guard rear panel :- Chuck guard with limit switch monitoring :- Chip deflector :- Longitudinal stop with micrometer screw :- Change wheel door with limit switch monitoring :- Braking device for the main drive :- Starting clutch Iedpfjyu Iliox Ahvehw :- LED machine light in the chip guard rear panel :- Multi Suisse size B quick-change steel holder :- incl. 1 BD 25120 quick-change holder :- Coolant device incl. coolant pump 30 l/min. at 0.2 bar :- Tapered sleeve MK5 for the main spindle :- Fixed center point MK5 :- Central lubrication :- Tropical insulation up to max. 45° air temperature and max. 80% relative humidity :- Oil pusher press :- Set of operating keys :- Documentation Additional equipment :- Set of installation plates, 8 pieces :- Num. Position indicator mounted on : Support arm above headstock :- Packaging

Condition: used, L + Z Lathe VOEST ALPINE - WEILER Type DA 210 / 1 Machine No. 1-004/2581 Year of manufacture: 1984 Centre distance: 1000 mm Swing over bed: 420 mm Centre height over bed: 210 mm Swing over cross slide: 240 mm Centre height over cross slide: 120 mm Spindle bore: 52 mm Spindle speed: 33 - 1500 rpm, 12 steps Chuck flange: short taper DIN 55027 size 6, 4x M12 Tailstock taper: MT 4 Motor power: 5.5 kW Electrical connection: 380 Volt, 50 Hz - Spindle speeds via 12-step gearbox - 3-jaw scroll chuck AROWA Ø 200 mm (only one set of chuck jaws) - Multifix quick-change tool post, size B, with 3 tool holders - Automatic longitudinal and cross feed - Coolant system - Spindle brake - Emergency stop - Splash guard - Fixed steady rest Ø 160 mm - Machine lamp - Operating manual Space requirement (L x W x H): 2200 x 1200 x 1450 mm Weight: 1500 kg Ihodpfeyah Rvex Ahvew In very good condition

Condition: used, Year of construction: 2008, Weiler Primus VC Universal Lead and Feed Screw Lathe Condition: Used Year of manufacture: 2008 Technical Data Center height: 140 mm Distance between centers: 500 mm Spindle bore: 40 mm Bed width: 205 mm Spindle speed, stepless: 30 – 4000 rpm Motor power Main drive rated power: 4 kW Tailstock taper: DIN 228, MK 3 Quill stroke: 85 mm Dimensions Weight: approx. 800 kg Overall dimensions LxWxH: approx. 1400 mm x 935 mm x 1550 mm Ihodpfx Aeyuy D Rjhvew

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, Weiler Condor B universal lathe in excellent condition, ex-educational use, equipped with a new 3-axis digital readout and accessories. Original paintwork. Machine No. 96-2374 with CE certification. Ihodeyuyrujpfx Ahvjw Technical specifications: - Year of manufacture: 1996 - Machine number: 96-2374 - Centre height: 165 mm - Distance between centers: 750 mm - Spindle speeds: from 22 to 2800 rpm - Spindle bore: 40 mm - Spindle nose: DIN 55027-5 with bayonet lock - Tailstock: Morse Taper 3 - Feed rates: from 0.016 to 0.5 mm/rev - Thread cutting: metric, imperial, module, and diametral pitch - Metric thread pitch: from 0.18 to 28 mm - Weight: approx. 1100 kg - Switchable spindle brake - Required space: LxWxH 183 x 88 x 129 cm Accessories and equipment: - Rhom steel 3-jaw chuck - New collet set 5C 1-28 mm in 0.5 mm steps with new drawbar - New drill chuck 1-13 mm - Multifix toolpost with 4 steel holders - Bed stop - New live centre - Change gears - Faceplate - Coolant system - Chip guard - Spindle cover with emergency stop - German instruction manual

Condition: ready for operation (used), Year of construction: 1991, L & Z leadscrew lathe WEILER COMMODOR B - GS certification - Heidenhain 3-axis digital readout - Centre height 180 mm - Centre distance 1000 mm - Spindle bore 56 mm - Spindle speeds 15 - 2000 rpm - Automatic longitudinal / cross feeds - Thread cutting / Metric / Inch / Module / Diametral Pitch - Chuck guard - 2 x Emergency stop - Multifix quick-change system with holders - Three-jaw chuck - Chip guard at rear Ihsdpfx Asyvry Ushvew - Coolant system - Documentation included Dimensions (LxWxH): 2.3 x 1.2 x 1.7 meters / Weight 1600 kg Errors and omissions excepted.

Condition: ready for operation (used), Year of construction: 2003, Weiler E50 x 1000 precision lathe (2003) Manufacturer: Weiler Type: E50 x 1000 Year of manufacture: 2003 Condition: good, used, under power Operating hours: 43.000h Technical data see pictures. Included in delivery: - Original documentation - Rota S Plus 250-62 Ihjdpfeyucf Rsx Ahvsw - Bezel - Parat 4 compartment tool turret

Condition: good (used), Year of construction: 2012, functionality: fully functional, Weiler Praktikant VC precision lathe Manufacturer: Weiler Ihsdpeyucd Tofx Ahvjw Type: Weiler Praktikant VC precision lathe Year of manufacture: 2008 Condition: used, very good, serviced and inspected with inspection protocol according to factory specifications Technical details Turning diameter: 250 mm Turning length: 650 mm Center height: 160 mm Swing diameter over bed slide: 320 mm Max. swing diameter over cross slide: 190 mm Main spindle: Speed range – main spindle: 30 – 4,000 rpm Power output – main spindle: 10 / 6.0 kW Number of gear stages: 1 Spindle head: 5 / DIN 55027 Spindle diameter in front bearing: 70 mm Spindle bore: 40 mm Usable bar diameter: 40 mm Tool holder: System: MultiFix B Turning tool shank cross-section: 20 x 20 Tailstock: Quill travel: 85 mm Quill diameter: 40 mm Tailstock taper: MK 3 Feeds: Number of feeds: 24 Longitudinal feed: 0.02 – 0.63 mm/rev Cross feed: 0.006 – 0.2 mm/rev Thread cutting: Metric: 0.25 – 8 mm Inches: 80-2 1/” Module: 0.25 – 4 mm Travel distances: Cross slide travel: 150 mm Top slide travel: 110 mm Swivel movement: 180 ° Total power requirement: 15 kVA Machine weight: approx. 1.0 t Space requirements: approx. 2.5 x 2.0 x 2.0 m Scope of delivery: – Weiler Praktikant VC precision lathe – Machine lamp – Documentation – Three-jaw chuck – Tailstock – Multifix tool holder – 8x machine feet – Original tool set

Condition: excellent (used), Year of construction: 2003, column diameter: 400 mm, drill diameter: 65 mm, Drilling ; Tapping in all directions Can be moved in 7 axes Fast preparation, accuracy and performence on heavy and bulky parts. Ihsdpoyub Spefx Ahvew Field using Turbines, Generators, Compressors, Steel Construction, Boilers Containers, Chemoical equipment, furnces of cement work and shipbuilding Arm Length: 2070mm Max. drill Ø cast: 65mm Max. tap Ø: 48M Stroke pinole: 350mm Max. distance spindle - table:1550mm Min. distance spindle - table:305mm Speeds / ranges: 900Rpm Spindle Taper: 5ISO/Bt/Mk Column sleeve: 400mm Power: 4kW Max. drill Ø steel: 50mm Length: 3500mm Width: 1325mm Height: 3400mm Weight: 6570kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2002, turning diameter 240 mm turning length 530 mm Ihedpfsycxibsx Ahvew control Siemens 810 D Powerline swing diameter 560 mm x-travel 207,5 mm z-travel 530 mm turning speeds 6000 U/min 12 Stk. total power requirement --- kW weight of the machine ca. 6,1 t

Condition: ready for operation (used), WEILER Condor VS 2 from university (test laboratory) - Guides "as new" - Centre height: 165 mm Iodpfx Ahjyu Hl Iovjhw - Swing diameter over bed: 330 mm - Distance between centres: 800 mm - Speed range: 28–2800 rpm - Automatic longitudinal / cross feeds - Spindle bore: 40 mm - Threading / metric / imperial etc. - Collet quick-change system incl. collets - Four-jaw chuck Röhm - Faceplate - Chuck guard - Multifix toolpost with inserts - Emergency stop - Documentation Dimensions (LxWxH): 2 x 0.8 x 1.6 m / Weight: 900 kg Subject to errors and input mistakes.

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, turning diameter over cross slide: 280 mm, WEILER MATADOR VS2 Weiler Matador VS2 lathe in very good condition from an educational institution, year of manufacture 1991, original paintwork, with Heidenhain digital readout and accessories. Technical specifications: * Machine number 91-102 * Centre height 140 mm * Distance between centres 500 mm * Speed: 15 / 3550 rpm * Spindle bore 36 mm * Spindle nose DIN 55027 -5 * Tailstock MK 3 * Automatic feed from 0.012 to 0.9 mm/rev * Thread cutting capability: metric, inch, module, and diametral pitch threads * Metric thread pitch from 0.25 to 12 mm * Weight approx. 700 kg Accessories and equipment: * Heidenhain 3-axis digital readout * 3-jaw steel chuck * Motor with brake * Multifix quick-change toolpost with 4 holders Ihodpfx Aoytd U Rohvew * Drill chuck * Rotating centre * Change gears * Electronic spindle protection * Machine manual in German.

Condition: ready for operation (used), Year of construction: 1993, functionality: fully functional, turning diameter over cross slide: 320 mm, turning length: 650 mm, spindle bore: 40 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 48 rpm, WEILER PRAKTIKANT 160B Weiler Praktikant 160B lathe in excellent condition, with many accessories. Year of manufacture: 1993. Technical specifications: * Machine year of manufacture: 1993, Machine number: 160 3471 * Centre height: 160 mm * Distance between centres: 650 mm * Speed: 16 steps, 48 / 2500 rpm * Spindle bore: 40 mm * Spindle head: DIN 55027 5 * Tailstock taper: MK 3 * Automatic feed from 0.02 to 0.63 mm/rev * Capable of metric, imperial, module, and diametral pitch threads * Metric thread pitch from 0.25 to 8 mm * Switchable spindle brake * Weight approx. 700 kg Accessories and equipment: * Heidenhain 3-axis digital readout * Several collets Ihsdpfx Aheytd Uksvow * 3-jaw steel chuck Rhom with 2 sets of jaws * 4-jaw chuck * Multifix A with 4 holders * Bed stop * Fixed centre * Change gears * Machine feet * Machine manual in German.

Condition: used, L + Z Lathe WEILER Type Praktikant 800R Machine No. 3315 Year of manufacture: 1984 Center distance: 800 mm Swing over bed: 280 mm Swing over cross slide: 160 mm Center height over bed: 140 mm Center height over cross slide: 80 mm Spindle bore: 36 mm Feeds: longitudinal and face Chuck mount: short taper DIN 55027 size 5, 4x M10 Tailstock taper: MK 3 Quill travel: 90 mm Spindle speed: 42 - 2000 rpm Drive power: 1 / 1.6 kW Electrical connection: 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and 8 gearbox steps - 3-jaw scroll chuck RÖHM ZS Ø 160 mm with 1 set of stepped jaws - MULTIFIX quick-change tool post size A with 3 tool holders Ihjdpfx Ahjyr R Dcovew - Emergency stop - Hinged chuck guard - Operating manual with electrical diagram Required space (L x W x H): 1900 x 700 x 1300 mm Weight: 560 kg Good condition

Condition: excellent (used), functionality: fully functional, Weiler Matador VC Infinitely variable speed 25 - 2000 rpm with digital speed display 3-axis digital readout Turning range 280 x 500 mm Spindle bore 36 mm Tailstock Morse taper 3 Röhm 160 mm 3- and 4-jaw chucks Ihsdpfxjyuqb Te Ahvjw Quick-action drill chuck, live center Collet chuck system with collets Multifix A with 4 tool holders Electrically monitored chuck guard, emergency stop Condition: very good, runs smoothly, guides in perfect condition Test turning: 100 mm in free space, 0.015 mm accuracy Dimensions: L 1.45 m, H 1.25 m, W 0.65 m Weight: approx. 650 kg Inspection under power possible Loaded free of charge ex D - 88433 Schemmerhofen.

Condition: ready for operation (used), Year of construction: 1990, operating hours: 51,392 h, total height: 1,700 mm, overall weight: 1,300 kg, This Weiler E30 was manufactured in 1990. A robust horizontal turning machine featuring a spindle bore of 42mm and a swing diameter over bed of 330mm. It supports a wide range of thread cutting, from metric to DP thread, and includes a Multifix holder B. Ideal for detailed and versatile turning operations. Contact us for more information about this machine. Additional equipment Ihsdpfxjyaimfs Ahvew • Multifix holder B mounted • Fixed steady rest (option) clamping range: 15-100 mm • Moving steady rest (option) clamping range: 10-85 mm • Collets ranging from 3- mm (increments of 0.5 mm) • Tailstock with an MK3 chuck Machine Benefits Technical Machine Benefits • Drive power 100% / 60% ed: 9/11 kw • Max. Torque on the turning spindle: 180 nm • Total speed range: 1-4500 min⁻¹ • Feed drive: three-phase ac feed drives • Feed range longitudinal: 0-20 mm/rev • Ellganggeschwindghell longitudinal/plan: 10/7. 5/5/3. 5 m/min • Quill diameter: 50 mm • Quill stroke: 110 mm • Inner taper of quill: mk 3 Extra Information Swing diameter over facing slide: 160 mm Bed width: 240 mm Sliding movement of the facing slide: 180 mm Bed slide guide length: 395 mm Turning tool cross-section (height/width): 20 x 20 mm Spindle head according to DIN 55027 Gr. 5 Spindle diameter in the front bearing: 70 mm Inner taper of the main spindle: Mk 5 Workpiece Metric thread range: 0.1 - 400 mm Inch thread range: G/1" 1/4 - 56 Module thread range: mm DP thread range: 1-224 G/" Number of threads max.: 50 Dimensions Machine Depth 1800 mm

Condition: ready for operation (used), Year of construction: 2008, operating hours: 22,491 h, spindle speed (max.): 1,800 rpm, travel distance X-axis: 410 mm, spindle motor power: 37,000 W, total height: 1,930 mm, total width: 2,120 mm, overall weight: 5,500 kg, product length (max.): 4,250 mm, number of axes: 2, Horizontal turning machine manufactured in 2008. This Weiler E70 / 2000 features a swing over bed of 720 mm and a maximum workpiece weight of 2,500 kg. It includes a steady rest, tailstock, and faceplate, providing versatility for various applications. With a spindle speed range of 1 – 1,800 rpm and a robust main drive power of 37 kW, this machine is designed for precision. If you are looking to get high-quality turning capabilities, consider the Weiler E70 / 2000 machine we have for sale. Contact us for further details. • Working range and capacities: • Swing over bed: 720 mm • Swing over cross slide: 430 mm • Center height: 360 mm • Distance between centers: 1,000 / 2,000 / 3,000 / 4,000 / 6,000 mm • Bed width: 480 mm • Max workpiece weight (unsupported): 2,500 kg • Max workpiece weight (with steady rest): 3,800 kg • Spindle and headstock: • Spindle bore (standard): 106 mm • Spindle bore (options): 128 / 165 / 216 / 262 / 317 mm • Spindle nose: DIN 55027 size 11 • Max torque at spindle: 3,150 Nm • Feeds and movement: • Z-axis rapid traverse: 10,000 mm/min (10 m/min) • X-axis rapid traverse: 5,000 mm/min (5 m/min) • Feed force (Z): 20,000 N • Feed force (X): 10,000 N Ihsdsyn Nxkspfx Ahvsw • Tailstock: • Quill diameter: 115 mm • Quill stroke: 225 mm • Inner taper: MK 6 (Morse Taper) • Threading capabilities: • Metric threads: 0.1–400 mm • Inching threads: 1/4–56 TPI • Module threads: 0.125–28 mm • DP threads: 1–224 DP • Hours: 22,491 h Additional equipment • Steady rest • Tailstock • Faceplate

Condition: ready for operation (used), Year of construction: 2009, spindle speed (max.): 2,500 rpm, total height: 1,785 mm, overall weight: 3,850 kg, number of axes: 2, This Weiler E50 was manufactured in 2009. A robust horizontal turning machine featuring a swing diameter over bed of 570 mm and a spindle bore of 83 mm. It offers a bed width of 350 mm and a turning tool cross-section of 32 x 25 mm. Ideal for precise and efficient turning operations. Contact us for more information about this machine. Machine Benefits Qualitative Machine Benefits • Spindle diameter in the front bearing: 120 mm • Spindle bore: 83 mm • Inner taper of the main spindle: metric 90 • Feed range longitudinal and planar: 0-20 mm/rev • Feed force longitudinal: 10000 n • Feed force planar: 7000 n • Input speed longitudinal/planar: 10/7 m/min or 5/3. 5 m/min • Metric threads: 0. 1-400 mm • Inch threads: 1/4" - 56 g/1" • Module threads: Technical Machine Benefits • Drive power (60% / 100% ed): 20/17 kw Ihjdpfx Aex D Ibbohvow • Max. Torque at the turning spindle: 1600 nm • Gear stage i: 1-625 min-¹ • Gear stage ii: 4-2500 min-¹ • Bed width: 350 mm • Quill diameter: 80 mm • Quill stroke: 200 mm • Inner taper of the quill: mk 5 • Turning tool cross-section (height/width): 32 x 25 mm • Spindle head according to din 55027: size 8 Extra Information Machine still under power/ DP threads: 1 - 224/ Fixed steady rest clamping range: 12-150 mm / 120-270 mm/ Moving steady rest clamping range: 12- mm/ The machine has been working effectively in 1-shift operation since it was purchased/ The chuck incl. hard & several sets of soft jaws and the tailstock can be supplied as accessories/ Any associated tools could be discussed in the event of an order/ The footprint of the machine is 2.8m x 5.2m, the 2.8m already includes 600mm as a workstation/ All manuals are available. Dimensions Machine Depth 3250 mm

Condition: ready for operation (used), Year of construction: 2009, operating hours: 9 h, This horizontal turning machine was manufactured in 2009. A Weiler E 60x1000, it features a spindle bore of 83mm and a swing diameter over bed of 640mm. With a maximum torque of 1400Nm and a speed range up to 2500 rpm, it's ideal for robust turning operations. Recently overhauled, it includes renewed bearings and guideways, ensuring high precision. Consider the opportunity to buy this Weiler E 60x1000 horizontal turning machine. Contact us for more information about this machine. Additional equipment • Tailstock spindle diameter: 100mm / Tailstock spindle travel: 200mm / Internal taper of the tailstock spindle: Mk.5 Machine Benefits Iedpfjx D Ry Hjx Ahvohw Technical Machine Benefits • Distance between centers: 1000mm /center height: 320mm / swing diameter over bed: 640mm / swing diameter over carriage: 405mm • Carriage travel: 380mm / bed saddle guide length: 570mm • Spindle head according to din 55025, size 8 / spindle bore: 83mm / internal taper of the main spindle: metric 90 • Drive power 60% / 100% duty cycle: 20. 5/17 kw / max. Torque at the spindle: 1400nm / speed range gear stage 1: 0-800 rpm / speed range gear stage 2: 0-2500 rpm • Overhaul measures include hardening and grinding of bed guideways, grinding of tailstock guideways, and overhauling of bed and cross-slide unit. • Replaced and renewed components include sliding surfaces, wedge rails, all wipers, belts, main spindle motor, safety devices, rotary switches, and lubrication system. • Cycle control weiler: 840d/sl1 • Tool holder according to customer requirements: multifix size c or parat size 3 Extra Information Machine overhauled in 2022Cycle controlledOptional: A used 200 mm jaw chuck can be supplied. A Lynette is not included with a 1 m centre distance, but can be purchased from the manufacturer at any time. As stated in your description, we offer customers a choice of two different tool systems: Multifix size C or Parat size 3. These are completely rebuilt, which is why there are no tool holders.

Condition: ready for operation (used), Year of construction: 2001, spindle motor power: 45,000 W, total height: 2,120 mm, overall weight: 11,500 kg, controller manufacturer: SIEMENS, controller model: 810 D, product length (max.): 5,400 mm, number of axes: 2, This Weiler E120x3000 was manufactured in 2001. It features a center distance of 3000 mm, center height of 600 mm, and a swing diameter over bed of 1200 mm. The spindle bore is 165 mm, and it offers a robust main drive with a power of 45/37 kW. Ideal for heavy-duty turning, this machine includes accessories like a lathe chuck, faceplate, and a steady rest. Contact us for more information about this machine. • Working area: • Center distance: 3000 mm • Center height: 600 mm • Swing diameter over bed: 1200 mm • Swing diameter over cross slide: 830 mm • Cross slide travel: 590 mm • Bed slide guide length: 860 mm • Turning tool cross-section (H x W): 40 x 40 mm • Tool holder: Parat size 4 • Turning spindle: • Spindle head DIN 55027 / 55026, size 15 • Spindle bore: 165 mm • Main spindle taper: metric 171 • Main drive: • Drive power (60% / 100% ED): 45 / 37 kW • Max. spindle torque: 8000 Nm • Speed range gear stage 1: 1–280 rpm • Speed range gear stage 2: 4–900 rpm • Tailstock: • Quill diameter: 140 mm • Quill stroke: 300 mm • Quill internal taper: MK 6 • Machine dimensions and weight: • Overall length: 5400 mm (without chip conveyor), 6535 mm (with chip conveyor) • Overall width: 2600 mm • Overall height: 2120 mm • Machine weight: 11,500 kg • Overhaul services: • Hardening and grinding of all bed guides • Grinding of tailstock guides Ihedpfx Ajx D Hz Tehvow • Overhaul of the complete bed and cross slide assembly (grinding/scraping all guideways) • Renewal of the bed slide's sliding lining • Renewal or relining of the keyways and bottom guides • Renewal of all wipers • Replacement of all belts • Overhaul of the main spindle assembly in the headstock • Renewal of the X-axis including bearings • Renewal of the Z-axis including bearings • Overhaul of the tailstock quill (MK 6 taper regrinding), replacement of spindle and nut • Adjustment of the tooling system • Replacement of the main spindle motor • Checking of the auxiliary motors (X- and Z-axis) • Overhaul of existing safety devices (sliding hood/jaw guard) • Replacement of all rotary, toggle, and limit switches • Replacement of the spindle and handwheel encoder • Replacement of the movable cables and coolant hoses in the work area • Replacement of the central lubrication unit • Renewal of the energy chains • Painting according to specifications (standard textured basalt and light gray) • Assembly and geometric inspection of the machine according to DIN 8605 Additional equipment • 1x used lathe chuck Ø630 mm with various jaws • 1x used faceplate Ø1100 • 1x used steady rest, max. Ø300 • 1x used chip conveyor

Condition: defective spare-parts repository (used), Year of construction: 1987, functionality: not functional, Fault: Short circuit in motor control board (see display) Max. turning diameter over bed: 280 mm Max. turning diameter over cross slide: 140 mm Travel: Z = 350 mm, X = 230 mm Spindle bore: 41 mm Max. spindle bore: 41 mm Iedpoyrqwiofx Ahvshw Tool holder: Baruffaldi 4-position Tailstock Dimensions LxWxH: 2600 x 2000 x 1900 mm Weight: 1,500 kg

Condition: used, L + Z Lathe WEILER Type Condor 81 A Mach. No. 36553 Year of manufacture approx. 1985 Centre distance 750 mm Swing over bed 330 mm Centre height over bed 165 mm Swing over cross slide 180 mm Centre height over cross slide 90 mm Spindle bore 40 mm Chuck mounting: Short taper DIN 55027 size 5 Tailstock quill taper MK 3 Quill travel 110 mm Spindle speed 45 - 2800 rpm, 16 steps Drive power 3 kW Power supply 400 Volt, 50 Hz - Spindle speed through 16 gear steps - 3-jaw chuck Ø 160 mm RÖHM with hard and soft jaws - Multifix quick-change tool post size B with 3 holders - Automatic longitudinal and cross feed - Electro-mechanical spindle brake - Emergency stop - Coolant tank with pump integrated in the machine base, without feed hose to working area - Hinged chuck guard - Splash guard - 1 live center - Electric diagram and operating manual Space requirements L x W x H 1850 x 950 x 1400 mm Weight 1100 kg Ihjdpfxsk S Ht Aj Ahvow Good condition

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: 573, turning diameter over cross slide: 340 mm, spindle bore: 66 mm, turning length: 1,100 mm, center width: 1,000 mm, turning diameter over bed slide: 570 mm, swing diameter over cross slide: 340 mm, quill stroke: 200 mm, quill diameter: 80 mm, quill travel distance: 200 mm, center height: 280 mm, rapid traverse X-axis: 10 m/min, rapid traverse Z-axis: 10 m/min, bed width: 350 mm, total length: 2,850 mm, total width: 1,815 mm, total height: 1,750 mm, workpiece weight (max.): 250 kg, spindle motor power: 15,000 W, overall weight: 3,050 kg, rotational speed (min.): 1 rpm, rotational speed (max.): 2,500 rpm, torque: 1,600 Nm, travel distance X-axis: 340 mm, travel distance Z-axis: 1,100 mm, workpiece weight between centers: 1,600,000 g, spindle diameter: 100 mm, Turning diameter in gap: 600 mm, chuck outer diameter: 315 mm, Equipment: rotational speed infinitely variable, The Weiler E50 is a high-quality conventional precision lathe from the German manufacturer Weiler. It is frequently used in toolmaking, mechanical engineering, training workshops, as well as repair and single-part production. The machine is characterized by a very robust cast iron construction, precise guideways, and high concentricity accuracy. Thanks to the powerful main spindle and stable design, it is suitable for both fine precision machining and heavier cutting operations. Isdpfx Ahjyua Shovjhw Cycle-controlled The stated price is exclusive of dismantling, packing, and shipping. Sale from site, subject to prior sale. The machines are sold in used condition; any warranty and guarantee are excluded.

Condition: excellent (used), Year of construction: 1998, turning diameter 410/ 440 mm turning length 950 mm control Siemens / Weiler D2 workpiece weight max 900 kg spindle head Gr 6 MK 6 spindle bore 54 mm face stroke 230 dia. of quill MK 4 mm quill stroke 120 mm centre height 200 mm Iedpfx Aheyrh Apsvshw thread pitch max. in mm 0,1 - 250 mm spindle turning speed - stepless 1 - 3000 U/min total power requirement 12 kW weight of the machine ca. 2,1 t dimensions of the machine ca. 2,3 x 1,5 x 1,8 m