Used Colchester for sale (48)

Condition: ready for operation (used), An old Colchester engine lathe is available. Center height: 216mm, swing diameter over bed/cross slide/in gap: 432mm/267mm/711mm, distance between centers: 2000mm, spindle bore: 76mm, speed: 1600rpm, bed width: 343mm. Machine dimensions X/Y/Z: approx. 3200mm/1100mm/1400mm, weight: approx. 2500kg. An on-site inspection is possible. Hnjdoy E S D Ejpfx Ander

Condition: good (used), Colchester Mastiff 1400 lathe for sale. The machine comes from a workshop that has ceased operations. Fully operational and ready for use. Hnedpfx Ajw Al T Uendsr For more information, please contact us.

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: T40065, MACHINE SPECIFICATION Maximum swing 510mm Maximum turned diameter 290mm Maximum turning length 540mm Bed inclination 60 degrees Spindle centre height (from floor) 960mm Spindle nose A2-6 Power chucking system Hydraulic Spindle bore 77.5mm Bar capacity - collet 66mm Maximum spindle speed 5000rpm Spindle motor power 22kW Rapid travers : Z/X Axis 30/25m/min Turret: Tooling type VDI 40 Number of tooling stations 12 Number of driven tool stations 6 Maximum rpm of driven tool 4000rpm Maximum power of driven tool 3.7kW Maximum collet size of driven tool 20mm Hnedpfxoq Atxyj Andor C axis increment: Fully programmable 0.001 degrees Approximate net weight 4550Kg Machine Equipped with Fanuc 21i-T CNC Control System Hydraulic 3 jaw chuck 3 off Radial driven toolholders 3 off Axial driven toolholders 30 off Static toolholders Coolant system Lighting Interlocked guarding  

Condition: used, Lathe COLCHESTER Triumph 2000 Hnedpfxozrh Svo Andor

Condition: ready for operation (used), lathe Colchester Master Hnsdpfed Hdqvex Ander

Condition: good (used), Year of construction: 1995, functionality: fully functional, turning diameter over cross slide: 267 mm, spindle bore: 76 mm, center height: 228 mm, center width: 1,500 mm, quill stroke: 229 mm, quill diameter: 75 mm, total length: 3,030 mm, total width: 1,200 mm, total height: 2,000 mm, rotational speed (max.): 1,600 rpm, rotational speed (min.): 20 rpm, overall weight: 2,300 kg, Conventional lathe, center high 228 mm, between centers 1500 mm, bore Ø 76 mm, 16 speed 20 - 1600 rpm, motor 9,3 kw, camlock 8'', dimensions 310x120x200 cm, weight ca. 2300 kgs; equipement: pneumatic chuck SCHUNK ROTA Ø 315 mm, coolant device, 3-jaws chuck Ø 315 mm, several jaws, live center, tool post PARAT WD with toolholders, steady rest, drilling chuck, lamp, manual, cabinet Hedpfxoypud Ue Andenr

Condition: used, Year of construction: 2003, machine/vehicle number: 1527, Used lead and feed screw lathe COLCHESTER Triumph VS 2500 Centre height: 195mm Distance between centers: 650mm Spindle bore: 54mm Infinitely variable speed: 14–2500 rpm Tailstock quill: MT5, coolant system, quick thread cutting device Hodjx Hrumjpfx Andjnr Digital readout: FAGOR NUP 300 TS-RS 1 x RÖHM 3-jaw chuck, 5-position stop drum, spindle stop, machine lamp, 1 x PARAT 4-way turret, 4 x PARAT tool holders, live centre and quick-action drill chuck. The machine is located at our premises in 71334 Waiblingen-Beinstein and is available immediately. Inspection of the machine is possible by appointment.

Condition: good (used), Colchester Master 2500 In good condition. Includes some accessories. Transport can be arranged. Hnsdpfx Aszp U Apender

Condition: good (used), Year of construction: 1996, functionality: fully functional, machine/vehicle number: VM0429, turning diameter over cross slide: 196 mm, spindle bore: 42 mm, turning diameter over bed slide: 350 mm, center height: 170 mm, turning length: 650 mm, quill stroke: 140 mm, total length: 1,900 mm, total width: 1,100 mm, total height: 1,300 mm, spindle speed (max.): 3,250 rpm, spindle speed (min.): 20 rpm, metric thread steps: 51, type of input current: three-phase, overall weight: 1,350 kg, quill mount: MK 4, Equipment: rotational speed infinitely variable, Lead and feed screw lathe with digital display Colchester Master VS 3250 Digital display, 3 axes, Heidenhain Center height: 170 mm Distance between centers: 650 mm Swinging diameter over bed: 350 mm Swinging diameter over cross slide: 196 mm Spindle speed, stepless, from 20-3250 RPM (3 gear stages) Year of manufacture: 1996 Spindle bore: 42 mm Spindle mounting D1 4“ Camlock Tailstock taper MK 4 Tailstock quill travel: 140 mm Coolant pump Central lubrication of guideways Electromagnetic spindle brake Halogen lamp Longitudinal feeds from 0.036 to 1.2 mm/revolution Cross feed: half of the longitudinal values 51 metric thread pitches from 0.2 to 14 mm 56 Whitworth thread pitches from 2 to 56 threads/inch 20 module thread pitches from 0.2 to 3.5 module 20 diametral pitch thread pitches from 8 to 56 D.P. Operating manual and spare parts list, English Weight: 1350 kg L x W x H: 1900 x 1100 x 1300 mm Motor: 7.5 KW Including accessories: 3-jaw chuck, brand Pratt Burnerd 4-jaw chuck, Ø 200, brand Bison Quick-change collet chuck with lever 15 pcs. collets, Ø 1/1.5/2/3/4/5/6/7/8/9/10/12/13/14/15 mm 16 sets of soft jaws for 4-jaw chuck Quick-change tool holder Multifix with 5 tool holders Hnjdpfx Aezp Nknsnder incl. facing tool, cutoff tool, and internal turning tool 1 pcs. center punch 1 pcs. drill chuck, Ø 1 to 13 mm

Condition: used, Year of construction: 1989, functionality: fully functional, turning diameter over cross slide: 240 mm, spindle bore: 54 mm, turning diameter: 390 mm, turning diameter over bed slide: 390 mm, center height: 190 mm, turning length: 750 mm, quill stroke: 155 mm, total length: 1,950 mm, total width: 970 mm, total height: 1,250 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 25 rpm, metric thread steps: 39, type of input current: three-phase, overall weight: 1,170 kg, quill mount: MK 4, spindle mount: MK 4, Lead and feed screw lathe with digital display Colchester Triumpf 2000 Digital display for 3 axes, Mitutoyo Center height: 190 mm Distance between centers: 750 mm Swinging diameter over bed: 390 mm Swinging diameter over carriage: 240 mm 16 spindle speeds from 25-2000 rpm Year of manufacture: 1989 Spindle bore: 54 mm Spindle mount D1 6” Camlock Tailstock taper MK 4 Tailstock quill travel 155 mm Coolant pump Central lubrication of guideways Electromagnetic spindle brake 15 longitudinal feeds from 0.04 to 1.0 mm/revolution 15 cross feeds from 0.02 to 0.05 mm/revolution 39 metric thread pitches from 0.2 to 14 mm 45 Whitworth thread pitches from 2 to 72 threads/inch 18 module thread pitches from 0.3 to 3.5 module 21 diametral pitch thread pitches from 8 to 44 D.P. Operating manual and parts list in German, English, French, Swedish, Finnish Weight: 1170 kg L x W x H: 1950 x 970 x 1250 mm Motor: 5.5 kW Including accessories: 4-jaw chuck, Ø 250, brand Bison 27 sets of soft jaws for 4-jaw chuck Hsdpfxezp H Rxe Andenr 1 quick-change tool holder Multifix with 5 tool holders including facing tool, parting tool and internal turning tool Hollow spindle stop 1 drill chuck, Ø 1 to 13 mm 1 center punch Turret bed stop Rear tool holder

Condition: excellent (used), functionality: fully functional, spindle bore: 40 mm, turning length: 1,016 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 67 rpm, Colchester Master 2500 40" between centres Spindle speeds 30-2500rpm Imperial dials 2 axis DRO Coolant pump and system Morse taper 3 tailstock Spindle bore 40mm Quick change tool post Comes with 4 jaw 10" Hodpfozphivjx Andonr 3 jaw with reverse jaws 8" 12" face plate Drive dog plate 4 x quick change tool holders

Condition: used, Year of construction: 2019, turning length 1000 mm turning diameter 210 mm swing diameter over bed slide 300 mm centre height 167 mm spindle bore 40 mm bed width 210 mm turning speeds 40 - 2500 U/min Hsdpfszl E T Dex Andenr weight of the machine ca. 1000 kg. range L-W-H 2000 x 1000 x 1700 mm Features: - Digital display - 3-jaw chuck - Chuck guard - Multifix quick-change tool holder - Chip deflector - Chuck guard - Coolant system - Bed stop - Instruction manual

Condition: excellent (used), Year of construction: 1999, • FANUC 210i - T control (cycles) • Max. distance between centers: 1,250 mm • Max. turning diameter: 400 / 585 mm in offset • Spindle speed: 12 . . . 2,500 rpm • Spindle bore: 54 mm • X-axis: 210 mm • Z-axis: 1,181 mm Hnjdpsw S E R Rjfx Ander • Cutting gap adjustment: 0.05 – 0.8 mm • Motor power: 7.5 kW • Weight: approx. 2,700 kg

Condition: good (used), Used 2-meter lathe from Colchester Type: Mastiff 1400 Turning length: 2000 mm Turning diameter over bed: 540 mm Spindle bore: 89 mm Includes 3-jaw and 4-jaw chuck Includes steady rest Hnedpfezi Saljx Andsr 2-axis digital readout

Condition: refurbished (used), Straight Bed Machine Hnedpfxev I Ddqs Andsr Distance between centers: 50" Swing over bed: 15" Swing over cross-slide: 9" Spindle speeds: 25 to 2000 (16) Spindle bore: 2" clear Full length screw cutting Chuck mounting: D16 Tailstock taper: No. 4 morse 3 and 4 jaw chuck and face plate Coolant 2 axis DRO Main motor: 7.5 hp Machine in good condition Approx weight: 1.5 tons Approx dimensions: 7 'x 4' x 5' Quick change tool post and 3 holders

Condition: refurbished (used), Gap Bed machine Between centers: 60” Swing over bed: 22" Hnsdpfx Aoq N Ay Aendsr Spindle speeds: 18 - 1400RPM Spindle bore: 3 1/2" Diameter 90mm Chuck mounting: D1 - 11 Tailstock taper: No 5 Morse Tool Post: Quick Change 4 holders & Keys New 3 Jaw Chuck Coolant New 2 Axis DRO System Chuck guard TBC 6-month warranty

Condition: good (used), Gap Bed machine 28” Between centers: 80” Swing over bed: 17" Swing over the saddle 10 ½” Spindle speeds: 20 - 2000RPM Vari speed Spindle bore: 3 ½” Diameter Hnedpfsnr Nl Sex Andsr Chuck mounting: D1 - 8 Tailstock taper: No 6 Morse Execution: imperial Metric & Imperial screw cutting Tool Post: Quick Change 4 holders Used 3 and 4 Jaw Chucks Fixed steady Coolant, swarf tray and chuck guard

Condition: good (used), functionality: fully functional, turning diameter over bed slide: 335 mm, center height: 165 mm, turning length: 635 mm, swing diameter over cross slide: 210 mm, rotational speed (max.): 1,800 rpm, quill mount: MK 3, three-jaw chuck diameter: 200 mm, For sale is a Colchester lathe in good, used condition, as can be seen in the pictures. Technical data: • Manufacturer: Colchester • Model: Student-1800 • Distance between centers/turning length: approx. 635 mm • Center height: approx. 165 mm • Turning diameter over bed: approx. 335 mm • Turning diameter over carriage: approx. 210 mm • Max. spindle speed: approx. 1800 rpm • Spindle bore: approx. Ø40 mm • Three-jaw chuck: approx. Ø 200 mm • Spindle nose: 4 in. D.1. Camlock • Tailstock spindle: MK3 • Condition: Used, functional Shipping costs via freight forwarder are possible (please inquire, providing your postal code). International buyers are welcome! You will receive an invoice with VAT shown. Inspection/collection is possible by arrangement in 42855 Remscheid. Sale ex works 42855 Remscheid, free loading. Hodpfx Anszlcrqsdonr Errors in technical data and prior sale reserved.

Condition: used, Lathe, turning machine, lead screw lathe, lead screw lathe -Handover: in the current condition as viewed Hnedorbm T Dspfx Andor -Condition: Gearbox makes noise (video) -Manufacturer: Colchester, Leadscrew and Feedscrew Lathe Type Triumph 2000 -Turning length: 1300 mm -Turning Ø over bed: 390 mm -Turning Ø over support: 240 mm -Spindle bore: Ø 55 mm -Spindle speeds: 22 - 2000 rpm -Three-jaw chuck: Ø 250 mm -Accessories: Tool holder/tools see photos -Tailstock mount: MK4 -Dimensions: 960/2435/H1640 mm -Weight: 1327 kg

Condition: excellent (used), Year of construction: 2006, CNC Teach-in Lathe COLCHESTER Alpha 1350 XT Travel X: 245 mm Numerical Command FANUC Between points: 650 mm Maxi turning diameter: Ø 350 mm Spindle diameter: Ø 41 mm Max Rotation: 3500 RPM Turret: 8 tools VDI 30 Year of construction: 2006 Spindle motor: 5,5 kW 3 speed ranges Centralized lubrication pump Delivered with 2 3-jaws chuck Ø 160 mm Delivered with some tool holders (see photos) Voltage: 380 V Dimensions (L x W x H): 2500 x 2000 x 1900 mm Hedpfxjzku Izj Andenr Weight: approx 2 T Machine in very good condition

Condition: good (used), Year of construction: 1999, All additional equipement from pictures will come. Technical details shown on picture. Hnsdpfeww Iriox Andjr

Condition: good (used), Year of construction: 2004, Technical details shown on pictures. Parts shown by hand not come. Hnsdpfxoww Haxo Andjr

Condition: excellent (used), Swing over bed 400 mm Distance between centers 650 mm Spindle speeds 0-2500 rpm Hjdpfxoq Dll Dj Andonr Misc. accessories MARCELS MASCHINEN CH

Condition: good (used), Steady rest COLCHESTER Magnum Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Hodpfx Aszcnw Ijndenr

Condition: used, greates pass round over bed 540 mm swing diameter over face slide 370 mm centre distance 3000 mm centre height 270 mm turning dia. in gap 815 mm bed width 344 mm spindle bore 88 mm spindle diameter in front bearing 133 mm spindle taper 11" D1 Camlock turning speed range 18-1400 U/min turning speeds 16 3-jaw chuck Röhm Ø 315 longitudinal feeds: 0,06-1,0 mm face feeds 0,03-0,5 mm metric threading 0,4-14 mm inch threading 2-72 G/1" thread - module 0,3-3,5 mm thread - DP 8-60 Pitch tailstock quill diameter 75 mm quill stroke 230 mm taper of tail spindle MK 5 slide valve travel 280 mm upper head travel 150 mm Hedjxnqzxjpfx Andsnr Overall size ca. 4700 x 1100 x 1400 mm weight ca. 3200 kg power capacity 9,4 kW Accessories: 2-axis digital display Fagor Röhm wedge bar chuck Ø 315 mm incl. hard base jaws and hard attachment jaws Multifix steel holder size C incl. 6 interchangeable cassettes Rotating center point Switchable lathe chuck guard 2 steady rests Chip guard Coolant device Work light Guideways in good condition without scratches, not worn Machine is in good overall condition with signs of wear commensurate with age. Includes operating instructions Translated with (free version)