Used vertical turning lathes for sale (182)

Condition: good (used), CHARACTERISTICS Plate diameter ⌀; 3200 mm Dcedpor I Ayksfx Albsl Maximum turning/turning diameter ⌀; 3300 mm - With upright forward; 3300 mm - With upright set back; 5600 mm Min. turning/turning diameter ⌀ - With advanced upright; 800 mm - With upright set back; 3100 mm Max turning height; 750 mm Control; FAGOR 8025 Spindle RPM (2 ranges); - 0,5 - 10 rpm - 10 - 40 rpm Motor Power; 80 hp Maximum table load; 30.000 kg

Condition: excellent (used), Year of construction: 2014, control Fanuc 31/32 i 2 chucking diameter 170 mm swing diameter 210 mm x-travel 400 mm z-travel 200 mm length 2500 mm width 1900 mm height 2300 mm weight 5500 kg Dedpfx Aleyvvupsbscl

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: V16TC1548, workpiece weight (max.): 8,000 kg, workpiece diameter (max.): 2,000 mm, faceplate diameter: 1,600 mm, workpiece height (max.): 1,350 mm, faceplate torque: 18,000 Nm, TECHNICAL DETAILS Faceplate diameter: 1,600 mm Maximum faceplate torque: 18,000 Nm Dcodpfxjxvxrbo Albol Maximum thread milling diameter: 1,800 mm Maximum facing diameter: 1,800 mm Maximum distance between the faceplate and the clamping surface of the inserted tool slide: 1,550 mm Slide dimensions: 220 × 220 mm Maximum workpiece diameter: 2,000 mm Maximum slide stroke: 900 mm Maximum workpiece height when using the 200 mm tool holder: 1,350 mm Maximum workpiece weight, depending on faceplate rotation: 8,000 kg Maximum tool shank diameter: 40 mm Maximum crossrail travel: 800 mm Crossrail feed rate: 170 mm/min Working feed rate: 1–2,000 mm/min Rapid traverse: 10,000 mm/min Feed per revolution: 0.001–50 mm/rev Rotating tool spindle speed, programmable in two ranges 1st range: 1–1,200 rpm 2nd range: 1,200–2,400 rpm Tool holder: ISO50 MACHINE DETAILS Total power requirement: 80 kW Dimensions & Weight Footprint approx.: 4.4 x 4.62 m Machine weight approx.: 25 t EQUIPMENT C-axis

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: S.1003825.001, faceplate diameter: 800 mm, workpiece length (max.): 800 mm, workpiece width (max.): 720 mm, TECHNICAL DETAILS Faceplate diameter: 800 mm Clamping diameter: 800 mm Max. workpiece dimensions: 800 x 720 mm Dcedpfx Aljxvrhvjbjl Tool interface: Capto C6 Tool magazine positions: 2 x 80 MACHINE DETAILS Total power requirement: 110 kW Dimensions & Weight Approximate machine weight: 37,000 kg / total 52,000 kg Transport dimensions (machine): 5.07 x 2.98 x 3.90 m EQUIPMENT C-axis

Condition: used, Year of construction: 2006, Technical details: Dcsdpfx Aexc Idgslbsl turning diameter: 250 mm swing diameter: 260 mm Available from October 10, 2025 The system consists of two individual systems that are linked together. No driven tools! *

Condition: used, Year of construction: 2013, Technical details: turning diameter: 250 mm swing diameter: 250 mm turning height: 200 mm Dcjdpfxjvxuc Eo Albjl total power requirement: 37,7 kW chuck diameter: 315 mm spindle speed max.: 5500 1/min travel -x axis: 625 mm travel -y axis: +100/-80 mm travel -z axis: 250 mm worktool system: VDI 30+40 weight of the machine ca.: 8 t The synchronous spindle is powered with 37.7 kW of power, a torque of 300 Nm and a maximum speed of 5,500 rpm. Typical components are ball cages, ball hubs, gear wheels, sliding sleeves, pump wheels, flanges, synchronizer rings, bearing rings and pivot pins. The machine bed is made of Hydropol, a mixture of special concrete and steel, which ensures the greatest smoothness and precision even with larger components and powerful machining. *

Condition: used, Year of construction: 2002, Technical details: turning diameter: 200 mm turning height: 120 mm weight of the machine ca.: 18 t Available from 01.08.2024 * Dcedpsr Dwpmofx Albel

Condition: ready for operation (used), Year of construction: 2000, General Data Machine weight 14500 kg Movement X-Axis Movement 350 mm Z-Axis Movement 410 mm Main Drive Number of axis 2 Spindle Speed 2500 RPM Dcsdpex D Dwrefx Albsl This Okuma 2SP-V35 was manufactured in 2000. A robust vertical turning machine featuring a max turning diameter of 350 mm and height of 410 mm. It includes a spindle speed up to 2,500 RPM and a 12-station tool holder. Ideal for precise, heavy-duty turning operations. Contact us for more information. Application Types Turning

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Vertical Turning Lathe – WEBSTER & BENNETT R48R 2PB C-axis, driven tools Condition: Used Year of manufacture: 2006 CNC: Siemens 840D Powerline Technical Specifications Faceplate diameter: 1,200 mm Turning diameter: 1,200 mm Number of slides (ram): 1 Dcsdpfxoxl E R Ne Albol Ram stroke: 1,200 mm Ram cross-section: 200 × 200 mm Max. workpiece height under crossbeam: 1,200 mm X-axis travel: 1,200 mm C-axis: available (C-Axis) Drives / Speeds Main spindle motor: 37 kW Main spindle speed: 0.2 – 430 rpm Milling spindle motor: 17 kW Milling spindle speed: 20 – 3,000 rpm Tool changer Turning: 50 positions, Capto C6, robot handling Milling: 10 positions, ISO 50, robot handling Other features Magazine and stations for turret/tool holders Machine weight: approx. 18 t Scope of delivery as described above only. Further options/accessories only as per written agreement.

Condition: like new (used), Year of construction: 2009, operating hours: 26,000 h, travel distance X-axis: 725 mm, travel distance Y-axis: 50 mm, travel distance Z-axis: 300 mm, spindle motor power: 11 W, spindle speed (min.): 5,000 rpm, total length: 3,171 mm, total height: 2,648 mm, total width: 4,254 mm, overall weight: 6,000 kg, CNC controller: SIEMENS SINUMERIK 840D-ERGOLINE Capacity X-axis travel mm: 725 Y-axis travel mm: ± 50 Z-axis travel mm: 300 Djdexf Hlbjpfx Albecl Turning length mm: 160 Max. turning diameter mm: ø: 250 Swing over bed mm: ø: 320 Tool magazine Magazine places: 16 Tool holder: VDI-30 Tool length max. mm: 390 Tool diameter max. mm: 140 Lower turret Number of tool slots St .: 12 Speed driven tools RPM: 4.000 Drive power driven tools kW: 11,7 Milling function: Yes Main spindle Speed spindle rpm: 5.000 Drive power spindle kW: 11,7 (40% ED) Maximun torque Nm: 280 / 360 (100% / 40% ED) Coolant system Tank capacity liter: 980 L High-pressure bar: 8 / 20 Equipment Chip conveyor CE conformity Coolant gun Air blast / coolant switch-over Internal coolant supply Paper band filter Automatic workpiece magazine loader - 16 positions x ø 220 Working time hours Under power: 38.000 Cutting Time: 26.000 Basic machine dimensions / weight Length mm: 3.171 Width mm: 4.254 Height mm: 2.648 Weight kg: 6.000

Condition: used, Year of construction: 2001, Technical details: turning diameter: 300 mm swing diameter: 350 mm turning height: 275 mm x-axis: 925 mm z-axis: 250 mm clamping chuck diameter: 200 mm Feed speed: 30 m/min. Dodsvb Dq Dopfx Albjcl total power requirement: 45 kW weight of the machine ca.: 7 t Machine was used just from time to time in the last years - very good condition! with CNC SIEMENS 840 D 12-station turret head with driven toolings workpiece in and out conveyor belt coolantattachment and chip conveyor diverse accessories *

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, travel distance X-axis: 660 mm, travel distance Z-axis: 300 mm, TECHNICAL DETAILS Dcsdpfxexy Hp No Albel X-axis travel: 660 mm Z-axis travel: 300 mm Chuck diameter: 250 mm Swing diameter: 270 mm

Condition: ready for operation (used), Year of construction: 2016, operating hours: 18,071 h, overall weight: 6,000 kg, number of axes: 3, This 3-axis DMG MORI Gildemeister CTV 250 2nd was manufactured in 2016. Ideal for precision vertical turning, this machine maintains robust construction and reliability. If you are looking to get high-quality turning capabilities, consider the DMG MORI Gildemeister CTV 250 2nd machine we have for sale. Contact us for more information. Additional equipment • shopturn option Machine Benefits Technical Machine Benefits • Availability from • Weight: 6000kg • 40 kVA • 58 A In max • 63 A • 400 V • 50 Hz • Control system: Siemens Sinumerik 840D Slimline • Main drive: AC main drive 25 / 32 kW • Duty cycle: 100% / 40% ED • Spindle speed: 5000 rpm • Torque: 280 / 360 Nm • Hollow clamping cylinder • 12-position turret with tool holder • Turret diameter: 340 mm • Hinged belt chip conveyor • 4-color status signal light • Air blow through main spindle • C-axis with driven tool system for turret UDI 40 • Drive for all tool stations • Y-axis travel +90 / −65 mm • Linear guideway system • Ball screw spindle • AC servo motor with integrated absolute encoder • Glass scale on guideways • Rapid traverse speed: 30 m/min • Coolant system 8 / 20 bar • Coolant tank capacity: 600 liters • Coolant pump flow rate: 8 bar / 20 l/min • High-pressure pump flow rate: 20 bar / 40 l/min • Coolant supply via turret disk to all turret stations • Band filter system filtration grade: 40 µm • Coolant level monitoring • Integrated working area extraction max. 400 m³/h • Workpiece probe Renishaw LP2DD • Probe installed at loading and unloading station • Stylus with pneumatically actuated flap and electrical control • Measuring accuracy: 10 µm • Function plate for additional tools • Machine cabinet temperature control max. 40°C • Electrical cabinet cooling unit up to 40°C Dcsdpfxex D Nl Io Albjl • Hydraulic oil cooler • Remote diagnosis support via internet • Working area flushing with 3 flushing screw connections • Two separately switchable valves with 8 bar pressure • Workpiece discharge conveyor for part transport system SRA 160 • Workpiece diameter: 100 mm • Continuous workpiece transport system SRA 160 in drag chain design • Storage capacity: 30 workpieces diameter 30–70 mm max 7 kg • Storage capacity: 18 workpieces diameter 30–100 mm max 15 kg • Maximum workpiece height: 160 mm • Maximum total workpiece weight: 320 kg including pallets • Loading height approx. 800 mm • Chain conveyor belt with transport prisms • Drag chain movement controlled by NC axis • Set of drag frames • Workpiece diameter minimum 30 mm maximum 160 mm • Light barrier for workpiece transport system pick-up station • Hold-down device for loading pallets SRA 160 • Robot interface Profinet • Electrical interface for 6-axis robot via Profinet • Power chuck centering and face clamping chuck • Intermediate storage tray supported on function plate • Air blow cleaning for inner workpiece area • Measuring probe with air blow with two nozzles front and rear • Clamping pressure adjustment with motor-controlled valves • Clamping pressure programmable via NC program • Extension of chip discharge chute on chip conveyor by 300 mm • Aluminium machining package • Modified slurry pump on chip conveyor • Forced indexing of band filter • Larger chip container • Extension of plug-in screens from chip conveyor • 3D data model of machine working area in STEP and IGES format • Delivery of 3D model on CD • PLC / SPS source code including hardware configuration of Siemens control in English

Condition: used, WEBSTER & BENNETT EV 36” HIGH SPEED VERTICAL BORER MAKE WEBSTER & BENNETT, MADE IN ENGLAND MODEL EV 36” TABLE DIA 915 mm SWING 1168 mm HEIGHT UNDER RAIL 533 - 1016 mm SPEED 13.5 - 300 rpm FEED RATE 0.005-0.250 inch/min MAIN SPEED 40 HP PLUS HIGH SPEED TAABLE Dcodpfx Ajxp Na Nelbel EV SERIES MACHINE ELEVATING RAIL SAFETY GAURDING SET OF JAWS FULLY FUNCTIONAL GOOD SLIDES

Condition: good (used), Year of construction: 2001, functionality: fully functional, Description Control system: Fanuc 21i-T Circulation diameter (max.): 260 mm Chuck diameter (max.): 250 mm Motor spindle speed: 4,500 rpm Clamping cylinder: Full clamping cylinder Tool carrier: 12-position disk turret without lifetool Tool holder: VDI 40 Workpiece feed: Dcjdpfx Aetq Tnujlbol Workpiece circulation belt with drag frame. Chip conveyor: Hinged belt conveyor.

Condition: used, Year of construction: 2001, functionality: fully functional, input voltage: 400 V, We offer 4 pieces Emag VL 3 for sale. Three machines with Lifetool. One machine without Lifetool. Year of construction of the machines 2000-2001 General description: Manufacturer: Emag Machine type: VL3 Technical data: Control: Fanuc 21i-T and Fanuc 18i-T Rotation diameter: approx. 210 mm Maximum speed 6,500 1/min Turret: VDI 40 mm, 12 stations Hinged belt chip conveyor Spindle holder: GR. 5 Dodpfx Alotrdlaobocl Circulating parts conveyor. Machine weight: approx. 5.5 t A used three-jaw chuck is included with every machine. The description is non-binding and should be checked during an inspection.

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 105958, travel distance X-axis: 700 mm, travel distance Y-axis: 375 mm, spindle speed (max.): 6,000 rpm, workpiece diameter (max.): 100 mm, workpiece length (max.): 150 mm, The automation is included in the scope of delivery! TECHNICAL DETAILS Travels X-axis: 700 mm Z-axis: 375 mm Workpiece Chuck diameter: 160 mm Max. workpiece diameter: 100 mm Max. workpiece length: 150 mm Main spindle Power 40% / 100%: 19.5 / 12.5 kW Torque 40% / 100%: 75 / 48 Nm Max. speed: 6,000 rpm Turret Tool stations: 12 Rapid traverse speed X / Y / Z: 60 / 30 / 30 m/min Driven tools Speed: 6,000 rpm Torque 30% / 100%: 27 / 15 Nm MACHINE DETAILS Frequency: 50 Hz Operating voltage: 400 V Djdpfxsxb Tu Ie Albecl Connected load: 30 kW Total weight: 6,000 kg

Year of construction: 2012, operating hours: 38,984 h, condition: refurbished (used), machine/vehicle number: 06860001401, Swing diameter: 320 mm Automatic workpiece feeder Chip conveyor High pressure cooling system with paper filter The price contains the machine itself, the cost of unassembly and the loading on truck. Every other cost on your side. Dcedpfx Ajk Ny R Dslbel

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: 103979, We offer for sale CNC vertical lathe EMAG, VL5i F., year of production 2016, used, preserved, functional. Still in production. Must see. Djdpfsuyh Tdex Albocl EXW price incl. loading. More information on request.

Year of construction: 2016, condition: like new (used), Offered is a vertical turning-grinding center VLC 100 GT, with the retrofit construction year 2022. With the pick-up spindle unit, workpieces can be fed directly from the transport conveyor belt to the working area. Due to its modular design, the VLC 100 can be configured for a wide range of applications. The pictures show an example of a combination of turning tools (block steel holders) and grinding spindles for soft or hard machining (inside, outside). Depending on the workpiece or technology, these machining modules can be easily adapted. CONTROL Siemens 840Dsl TECHNICAL DATA Workpiece diameter: max. 100 mm Workpiece height: max. 150 mm Dcodpfx Aleh Tm Duobol X-stroke: 605 mm Z-stroke: 530 mm POWER main spindle 18 kW grinding spindle 12 kW TOOL CARRIER 2x block steel holder VDI / Capto console with grinding spindle 12 kW, 60000 1/min Price, delivery time and equipment of the machine according to agreement.

Condition: like new (used), Year of construction: 2015, Workpiece Ø max. 400 mm Workpiece length max. 300 mm Chuck Ø max. 500 mm Swing Ø 520 mm Travel X-axis: 1,110 mm Travel Z-axis: 595 mm Main spindle: Power 40 / 100 % duty cycle: 47/34 kW Main spindle: Torque 40 / 100 % duty cycle: 600 Nm Main spindle: Max. speed: 2,850 rpm Dcodpfxjxy Ac Ss Albol Control: Fanuc 31i No Y-axis

Condition: used, Year of construction: 2012, turning diameter 400 mm swing diameter 420 mm x-travel 850 mm z-travel 315 mm spindle head DIN 55026 - Size 11 spindle bearing diameter 140 mm turning speeds max. 4000 U/min tool turret 12 times C5 Capto rapid traverse x + z axis 45 / 30 m/min feeding force 11 kN total power requirement 58 kW weight of the machine ca. 9 t dimensions of the machine ca. 9,5 x 4,5 x 3 m Hard turning Dry machining Chip conveyor Promot Portal and Cellmaster No clamping device available No tools available no Cellmaster accessories available Dodpfx Aevxwx Aslbecl

Condition: ready for operation (used), Year of construction: 2015, operating hours: 15,050 h, functionality: fully functional, travel distance X-axis: 660 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 200 mm, spindle speed (max.): 7,500 rpm, turning diameter: 220 mm, turning height: 175 mm, TECHNICAL DETAILS Turning diameter: 220 mm Swing diameter: 270 mm Turning height: 175 mm Control & axis travel Control: SIEMENS 840 D SL Dcsdpfx Alowynigsbsl X-axis: 660 mm Y-axis: 300 mm Z-axis: 200 mm Spindle & tool change Max. speed: 7,500 rpm Tool changer: 12-station MACHINE DETAILS Total power requirement: 24 kW Machine weight: approx. 5.2 t Space requirement: approx. 2.5 x 1.6 x 2.3 m

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, travel distance X-axis: 300 mm, travel distance Z-axis: 700 mm, turning diameter: 140 mm, turning height: 380 mm, turning diameter over bed slide: 250 mm, TECHNICAL DETAILS Turning diameter: 140 mm Swing diameter: 250 mm Turning height: 380 mm Travel paths Travel - X axis: 300 mm Travel - Z axis: 700 mm Spindle Spindle speeds: 1 - 6,000 rpm Drive power 40% duty cycle: 38.00 kW Spindle nose: DIN 55026 - size 6 Spindle bore diameter at front bearing: 110 mm Feed & Rapid Traverse Dcjdpfsxf A Npsx Albel X-axis feed rate: 1 - 30,000 mm/min X-axis rapid traverse: 30.00 m/min X-axis feed force: 9,000 N Z-axis feed rate: 1 - 40,000 mm/min Z-axis rapid traverse: 40.00 m/min Z-axis feed force: 10,000 N Tools Number of tools in turret 1: 11 Number of tools in turret 2: 11 Toolholder: VDI 40 MACHINE DETAILS Control: SINUMERIK 840D Total power requirement: 70.00 kW Machine weight: approx. 22.00 t Space requirements: approx. 5.80 x 8.60 x H3.80 m EQUIPMENT Chip conveyor Extraction unit Infeed and outfeed Reversing gripper

Year of construction: 2016, condition: defective spare-parts repository (used), Offered is a VTC 250 shaft turning machine, which has four axes. Two turrets with eleven tool places each are installed in the machine. The machines were decommissioned several years ago and subsequently put into storage. As you can see in the pictures, the VTC will be sold in untested condition as spare parts carrier. The control system of the VTC 250 is no longer present in the machine. Other accessories such as chip conveyors, coolant systems or workpiece transport systems are not part of the advertisement. TECHNICAL DATA workpiece diameter: max. 100 mm workpiece height: max. 630 mm TOOL CARRIER Dedsk Rumqopfx Albjcl 2x EMAG turret, each equipped with 11x VDI 40 without driven tools + 1x gripper Price and delivery time of the machine after arrangement.