Used Emag for sale (128)

Condition: used, Year of construction: 2014, 2 Vertical Turning Machines (Tandem) Manufacturer: EMAG Model: VL 3 Year: 2014 Control: Fanuc 31/32i TECHNICAL SPECIFICATIONS FOR THE VL3 MACHINE (Subject to errors and omissions) WORKING AREA Chuck diameter: 170 mm Swing diameter: 210 mm X-travel: 400 mm Gedpfjytn Emsx Ahvotw Z-travel: 200 mm Loading time (depending on clamping device): 2–4 sec MAIN SPINDLE Spindle flange to DIN 55026, size 5 Spindle bearing diameter (front): 80 mm Maximum spindle speed: 7,500 rpm MAIN DRIVE AC asynchronous motor Power at 40/100% duty cycle: 25/16 kW Full power from spindle speed (100% ED): 1,800 rpm Torque at 40/100% duty cycle: 134/85 Nm FEED DRIVE Rapid traverse speed, X axis: 60 m/min Rapid traverse speed, Z axis: 30 m/min Feed force (X and Z): 5 kN Ball screw diameter (X/Z): 40 mm TURRET Cylinder shank mount DIN 69880, 12 positions Shank diameter: 40 mm ELECTRICAL EQUIPMENT according to VDE 0113 Operating voltage: 400 V Control voltage – DC: 24 V; AC: 230 V Frequency: 50 Hz Connected load without/with live tool: 28 / 31 kW Supply line protection: 50 A DIMENSIONS & WEIGHT Length: 2,500 mm Length incl. chip conveyor: 3,600 mm Width: 1,900 mm Height: 2,300 mm Weight: approx. 5,500 kg Linear roller guides in the X-axis located outside the machining area. GANTRY SLIDE INCLUDING SLIDE GUIDE Motor spindle mounting AC synchronous drives for X and Z axes Encapsulated linear measuring systems Resolution all longitudinal axes: 0.001 mm (absolute measurement) Rapid traverse: X axis 60 m/min, Z axis 30 m/min 1 MOTOR SPINDLE size 5 DIN 55026 Max. speed: 7,500 rpm Power at 40/100% duty cycle: 25/16 kW Torque at 40/100% duty cycle: 134/85 Nm HYDRAULIC UNIT with gear pump. CENTRALIZED OIL SUPPLY for lubrication of ball screws and roller guides COOLING UNIT Controls the machine’s thermal balance. Keeps motor spindle, turret, and control cabinet at ambient temperature. TOOL CARRIER SYSTEM 1 12-STATION TURRET with mounting holes Ø40 DIN 69880 Shortest indexing time via electric motor drive Cooled for consistent accuracy Internal coolant supply to tool in cut position WORKPIECE STORAGE & TRANSPORT SYSTEM 1 CIRCULATING WORKPIECE FEEDER Storage capacity: 27 workpieces (Ø 30–85 mm), or 18 workpieces (Ø 30–130 mm), Max. workpiece height: 100 mm Loading height: 1020 mm Chain-type accumulating conveyor with transport prisms Workpieces are NC-positioned for clamping device take-over. The pick-up spindle retrieves blanks from the conversion-free storage and conveyor system. COOLANT AND CHIP REMOVAL SYSTEM 1 COOLANT SUPPLY with integrated coolant tank, capacity approx. 300 l, coolant filter Coolant pump delivery rate: approx. 80 l/min at 7 bar 1 CHIP CONVEYOR Discharge height: 1,250 mm, hinge belt design 1 EMULSION MIST EXTRACTION from the machining area ADDITIONAL EQUIPMENT AND EXPANSIONS WORKPIECE STORAGE & TRANSPORT SYSTEM 1 INTERFACE FOR EMAG TRANSFER AND FLIP UNIT OP20 COOLANT AND CHIP REMOVAL SYSTEM 1 FLUSHING NOZZLES: 2x in working area, 1x in machine base HYDRAULICS & PNEUMATICS 1 MAINTENANCE UNIT FOR COMPRESSED AIR with mounting 1 PICK-UP DEVICE BLOW-OFF (2 nozzles, WITHOUT maintenance unit – see maintenance unit compressed air)

Condition: ready for operation (used), Year of construction: 2014, travel distance X-axis: 745 mm, travel distance Z-axis: 300 mm, spindle motor power: 18,000 W, spindle speed (max.): 4,500 rpm, total height: 3,200 mm, overall weight: 7,000 kg, controller manufacturer: SIEMENS, controller model: SINUMERIK 840Dsl, number of axes: 2, This EMAG VSC 250 vertical turning machine was manufactured in 2014. It features a powerful main spindle drive with up to 28kW power at 40% duty cycle and a speed range of 0-4500 rpm. Equipped with a Siemens SINUMERIK 840Dsl control system and a robust 12-position EMAG flange turret, it ensures precise and efficient operations. Ideal for handling workpieces up to 6kg with its specialized hydraulic chuck. For more information about this vertical turning machine, please reach out to us. Additional equipment • Coolant tank capacity: 360 liters Machine Benefits Technical Machine Benefits • High working accuracy, rapid traverse speeds, high maximum speed of driven tools • Machine from single shift operation • Maximum room temperature: up to 30°c Gtodpfxoytfpps Ahvew • Maximum humidity: 50% • Sound pressure level: 78db(a) Extra Information Machine still under power Technical Specification Through-spindle Coolant Yes Dimensions Machine Depth 3900 mm

Condition: ready for operation (used), Year of construction: 2015, travel distance X-axis: 300 mm, travel distance Z-axis: 740 mm, spindle speed (max.): 5,000 rpm, total height: 3,900 mm, overall weight: 14,000 kg, product length (max.): 3,100 mm, number of axes: 2, General Data Machine weight 14000 kg Measurements height 3900 mm Gtsdpfxjx Imr Aj Ahvew Movement X-Axis Movement 300 mm Z-Axis Movement 740 mm Main Drive Number of axis 2 Spindle Speed 5000 RPM Dimensions Machine Length 3100 mm This EMAG VTC 250 Twin was manufactured in 2015. A robust vertical turning machine featuring a MINERALIT base, it handles workpieces up to 140 mm in diameter and 630 mm in length, weighing up to 20 kg. Integrated with an EMAG pick-up system and dual turrets, each with 11 tool stations. Maximum spindle speed reaches 5000 rpm, driven by a 29 kW power unit. Contact us for more information about this machine. Application Types Turning

Condition: ready for operation (used), Year of construction: 2015, Main Drive Gjdjx Imtgopfx Ahvotw Number of axis 2 This EMAG VTC 250 was manufactured in 2015. A vertical turning machine featuring a chuck diameter of 250 mm and maximum workpiece diameter of 140 mm. Axis travel includes 300 mm on the X-axis and 740 mm on the Z-axis. Consider the opportunity to buy this EMAG VTC 250 vertical turning machine. Contact us for more information. Application Types Turning

Condition: ready for operation (used), Year of construction: 2006, General Data Machine weight 18000 kg Main Drive Spindle speed range 17500 Number of axis 5 Movement X-Axis Movement 600 mm X-Axis Rapid Traverse 45 m/min Y-Axis Movement 600 (975) mm Y-Axis Rapid Traverse 45 m/min Z-Axis Movement 500 mm Z-Axis Rapid Traverse 45 m/min Godpfxjx D D Uqe Ahvstw Tools Type of tool holder HSK A63 Media Chip conveyor Yes Additional Equipment Double Tool Change Table 2 NC-Controlled Swivel Units 4 NC-Controlled Rotary Tables KNOLL Coolant System 70 Bar High-Pressure Pump Chip Conveyor 2 Swivel Units for Clamping Bridge This 5-axis EMAG BAW 06-22 double-spindle machining center in 5-axis design (on both sides) was manufactured in 2006. It features double spindle machining, a 600 mm spindle distance, and X/Y/Z travels of 600/975/500 mm. The machine includes a high-speed milling spindle at 17,500 rpm, dual 72-unit tool magazines, and a robust HSK A63 tool holder. Additional features include a KNOLL coolant system, 70 bar high-pressure pump, and a chip conveyor. If you are looking to get high-quality milling capabilities consider the EMAG BAW 06-22 machine we have for sale. Contact us for more information. Application Types Milling

Condition: good (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 101458, Machine Data Sheet General Information Manufacturer: EMAG Machine Type: CNC Vertical Lathe Model: VL5 S Gtjdpfxextpi Sj Ahvsw Serial No.: 101458 Year of Manufacture: 2008 Technical Data Max. Chuck Diameter: 260 mm Max. Swing Diameter: 260 mm X-Axis Travel: 570 mm X-Axis Working Stroke: 250 mm Z-Axis Travel: 200 mm Conveyor Maximum Permissible Total Weight: 120 kg Conveyor Maximum Diameter: 220 mm Front Spindle Bearing Diameter: 110 mm Main Drive AC Asynchronous Motor Max. Speed: 4,500 (5,000) rpm Drive Power at 100/40% Duty Cycle: 18/27 kW Torque at 100/40% Duty Cycle: 202/303 Nm Number of Tools: 12 pcs. Tool Holder DIN: 69880, Diameter 40 mm, Max. Tool Length 190 mm Chip Conveyor (Hinged Belt Conveyor): Discharge Height 1,250 mm Coolant Tank: 315 liters, 8 bar Control: Siemens 840 D Connected Load: 42 kW Voltage: 400V 50Hz Weight: approx. 6,500 kg Required Floor Space: 10 m²

Condition: ready for operation (used), Year of construction: 2017, operating hours: 10,437 h, travel distance X-axis: 650 mm, travel distance Y-axis: 50 mm, travel distance Z-axis: 375 mm, spindle motor power: 18,100 W, spindle speed (max.): 6,000 rpm, number of axes: 3, This 3-axis EMAG VL2 vertical turning machine was manufactured in 2017. It features a max workpiece diameter of 100 mm, chuck diameter of 160 mm, and a swing diameter of 210 mm. The main spindle offers a power rating up to 18.1 kW and a max spindle speed of 6,000 rpm. Consider the opportunity to buy this EMAG VL2 vertical turning machine. Contact us for more information. Gtjdpfx Ahex S Skrsvow • Run time: 10,437 hours • Max. workpiece diameter: 100 mm (4") • Chuck diameter: 160 mm (6.5") • Swing diameter: 210 mm (8") • Max. workpiece length: 150 mm (6") • Main spindle: • Power rating (40% / 100%): 18.1 / 13.9 kW (24 / 19 hp) • Torque (40% / 100%): 77 / 59 Nm (57 / 44 ft-lb) • Turret: • Tool positions: 12 • Driven tools speed: 6,000 rpm • Driven tools torque (30% / 100%): 27 / 15 Nm (20 / 11 ft-lb) • Rapid traverse rate: • X axis: 60 m/min • Y axis: 30 m/min • Z axis: 30 m/min

Condition: ready for operation (used), Year of construction: 2012, operating hours: 35,385 h, travel distance X-axis: 400 mm, travel distance Z-axis: 200 mm, spindle speed (max.): 7,500 rpm, overall weight: 5,500 kg, controller manufacturer: SIEMENS, number of axes: 3, It's System of 2 EMAG VL03 horizontal turning machines that were manufactured in 2012 and 2010. It features a Fanuc control system, Series 32i-Model A, with a travel range of 400x200mm and a spindle speed of up to 7,500 rpm. The system machine includes a 12-station tool turret with VDI 40 tool holders and a tool drive of 6,000 rpm. Consider the opportunity to buy this horizontal turning machine system with robot included. Contact us for more information about this system. Additional equipment • Tool Storage: Conveyor belt for max. 27 workpieces Gtjdpsx Nr Skjfx Ahvew • Workpiece Feed: Vibratory spiral conveyor, vibrating plate, single workpiece feed • Handling Robot: 8-axis • Protective Enclosure: Robot cell • Scraper Belt Conveyor • Oil Mist Extraction • Cooling System: Cooling capacity 3 kW • Chip Container: 700x700x600 mm Machine Benefits Technical Machine Benefits • Diameter: 30-130 mm • Max height: 145 mm • Tool drive: 6000 rpm Extra Information Machine still under power Technical Specification Through-spindle Coolant Yes

Condition: excellent (used), Year of construction: 2020, max. wheel diameter 400 / 320 mm gear width 370 mm Godpfxoyrh Ais Ahvjtw max. module 10 min. module 1 Control Siemens 840 Dsl spindle turning speed - stepless 1 - 1500 U/min tangential adjustment 350 mm total power requirement 53 kW weight of the machine ca. 19,5 t dimensions of the machine ca. 4,5 x 2,9 x 3,3 m

Condition: good (used), Year of construction: 2011, functionality: fully functional, General Manufacturer: EMAG Machine Type: VSC 400 (VSC 7 DSL) Description according to sales documentation: Vertical turning machine with associated Promot portal loader Year of manufacture (machine): 2011 Year of manufacture (loader): 2011 Application: The machine was used for finish turning of hardened bevel gears for passenger car axle drives Condition (as per documentation): technically in good condition consistent with its age Scope of supply EMAG VSC 7 Dsl vertical turning machine Gtjdpfjyq Rwgox Ahvsw Promot portal loader Not included in the scope of supply All workpiece-contacting components Gripper jaws for the portal loader Shuttle supports on the part feed Clamping devices Tools Promot loader control system Type of current: 3~ Frequency: 50 Hz Operating voltage: 400 V General control voltage: 24 V Valve control voltage: 24 V Connected load: 43 kW Rated current: 68 A Main fuse: 100 A Lighting connection: 24 V / 18 W Total weight: 9,000 kg Promot loader data Manufacturer: Promot Automation Machine type: PROMOT Portal with Cellmaster Year of manufacture: 2011 Operating voltage: 400 V AC / 50 Hz Control voltage: 24 V DC Load voltage: 24 V DC Rated machine current: 12 A Main connection fuse: 25 A Conductor colors according to Promot nameplate Main circuit L1, L2, L3: 400 V AC – black Auxiliary circuit: 230 V AC – black Main circuit (contactors): 24 V DC – blue Control circuit PC: 24 V DC – blue Control circuit (signal lamps): 24 V DC – blue Control circuit (solenoid valves): 24 V DC – blue External voltage: 24 V DC – orange Neutral conductor N: light blue Protective conductor PE: green/yellow

Condition: good (used), Year of construction: 2026, feed length X-axis: 6,000 mm, feed length Y-axis: 500 mm, feed length Z-axis: 200 mm, - Speed range: [rpm]: 6,000 - Torque: [Nm]: 480 - Max. turning diameter over bed: 290 mm - Chuck diameter: 200 mm - Turret: 12-position, VDI 40, Sauter - Driven tools: 7.8 kW - Travel: - X-axis: 550 mm - Z-axis: 200 mm - Rapid traverse (X/Z) [m/min]: 30 / 20 - Feed (X/Z): [m/min.] 11 kN Gedpfxjytb Dcj Ahvjtw - Features: - Left-hand chip conveyor; 300 mm wide; ejection height 800 mm - Probe; direct linear measuring system; glass scales on all axes - Heidenhain circulating pickup tape - Machine with feed belt for part loading - Specification: - Overhauled in 2007 for approx. €50,000, complete headstock replaced. - Feed unit exchanged.

Year of construction: 2016, condition: like new (used), Offered is a vertical turning-grinding center VLC 100 GT, with the retrofit construction year 2022. With the pick-up spindle unit, workpieces can be fed directly from the transport conveyor belt to the working area. Due to its modular design, the VLC 100 can be configured for a wide range of applications. The pictures show an example of a combination of turning tools (block steel holders) and grinding spindles for soft or hard machining (inside, outside). Depending on the workpiece or technology, these machining modules can be easily adapted. CONTROL Siemens 840Dsl TECHNICAL DATA Workpiece diameter: max. 100 mm Workpiece height: max. 150 mm X-stroke: 605 mm Gtedpfx Ash Tm Dushvew Z-stroke: 530 mm POWER main spindle 18 kW grinding spindle 12 kW TOOL CARRIER 2x block steel holder VDI / Capto console with grinding spindle 12 kW, 60000 1/min Price, delivery time and equipment of the machine according to agreement.

Condition: used, Year of construction: 2019, max. workpiece diameter 400 mm max. workpiece length 300 mm control FANUC travel -x axis 995 mm travel -z axis 580 mm max. turning speeds 2.850 U/min no. of tools in turret 12 Stk./pcs. driven tools turning speeds 6.000 U/min Godpfxsynnuwj Ahvjtw Vertical Turning Machines | 2 x EMAG VL 8 equipped with driven tools and Track Motion TM loading system Both machines show the following operating hours: - Power-on hours: approx. 16,300 hrs - Spindle hours: approx. 9,950 hrs An extensive package of tools and clamping equipment is included in the scope of delivery. The machines are in very good condition and can be inspected under power. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VL8 | VL-8

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, TECHNICAL DATA MACHINE SPECIFICATION WORKING RANGE • Max chuck diameter. 260 mm • Max swing diameter. 260 mm • Max machining diameter. 220 mm • Max part length. 110 mm • Travel X axis. 570 mm • Working stroke Z axis. 250 mm • Travel Z axis. 200 mm CLOSED STANDARD AUTOMATION • Number of carrier frames for workpiece diameter 80 to 220 mm. 14 pieces • Number of carrier frames for workpiece diameter 30 to 160 mm. 18 pieces • Number of carrier frames for workpiece diameter 30 to 85 mm. 30 pieces • Max total load. 120 kg PICK UP SWITCH POINTS • Pressed. 1 mm • Over pressed. emergency stop. 5 mm • Pickup spring travel max. 30 mm CHAIN SYSTEM • Chain length. 182 inches • Chain pitch. 1 inch (25.4 mm) • Chain tension at 20 carrier frames. 400 N • Chain wheel. Z equals 30 • Gear ratio. i equals 100 • Motor revolution per belt revolution. 540 LOADING TIME • Loading time. 2 to 4 seconds MAIN SPINDLE • Spindle flange according to DIN 55026. Size 6 • Spindle bearing front diameter. 110 mm • Max spindle speed. 4500 rpm (5500 optional) MAIN DRIVE. AC ASYNCHRONOUS MOTOR. TYPE 1MB241H • Power at 100 percent duty cycle. 18 kW • Power at 40 percent duty cycle. 27 kW • Torque at 100 percent duty cycle. 202 Nm • Torque at 40 percent duty cycle. 303 Nm • Corner speed. 850 rpm FEED DRIVE • Rapid feed speed X axis. 60 m per minute • Rapid feed speed Z axis. 30 m per minute • Feed force X and Z. 5.5 kN • Ball screw diameter X and Z. 40 mm • Acceleration. 5 m per second squared TOOL CARRIER • Cylindrical tool shank mount according to DIN 69880. twelve positions • Shank diameter. 40 mm • Max tool length including holder. 190 mm • Max swing diameter. 740 mm TOOL CARRIER WITH DRIVEN TOOLS • Cylindrical tool shank mount according to DIN 69880. twelve positions • Shank diameter. 40 mm • Max speed. 6000 rpm • Corner speed. 3000 rpm • Max torque at 10 percent duty cycle. 45 Nm • Max torque at 40 percent duty cycle. 30 Nm • Max torque at 100 percent duty cycle. 15 Nm ELECTRICAL EQUIPMENT • Operating voltage. 400 to 480 V • Control voltage DC. 24 V • Control voltage AC. 230 V • Frequency. 50 or 60 Hz • Connected load. 42 kW • Supply fuse rating. 63 A • Electrical design standard. VDE 0113 DIMENSIONS AND WEIGHT • Length. 2680 mm • Length including chip conveyor. 3820 mm Gedpjx Elf Ajfx Ahvjtw • Width. 2040 mm • Height. 2400 mm • Machine weight. approx 6500 kg NOISE EMISSION • According to DIN 45635. • Measured sound pressure level. 78 dB(A) during continuous cutting on a cylindrical test part.

Condition: ready for operation (used), Year of construction: 2008, spindle speed (max.): 6,000 rpm, overall weight: 6,500 kg, Fanuc 18ITB parts diameter 130 mm, length 110 mm spindle speed 7500 rpm 12-station turret max tool speed 6000 rpm power 24 kW, chip conveyor Gedpfx Ahjx Irzvsvotw

Condition: good (used), Year of construction: 2013, grinding diameter 390 mm grinding length 650 mm centre height 200 mm total power requirement 46 kW weight of the machine ca. 6 t Gtodpfxew Inr Ns Ahvsw dimensions of the machine ca. 3x3x2,4 m Universal cylindrical grinding – Type WUG21 (W27) Grinding length 650 mm EMAG Weiss stands for high-end technology in universal cylindrical grinding between centres. With its CNC-controlled WUG 21 machines, EMAG Weiss offers the right solution for virtually every user. --> Technical data Max. grinding length: 650 mm --> Centre height: 200 mm --> External grinding diameter: 1 – 390 mm --> Max. weight flying MK4: 100 kg --> Max. workpiece weight between centres: 250 kg --> Feed: --> X-axis travel: 480 mm --> Z-axis travel: 1.150 mm --> Workpiece headstock --> Tailstock --> Grinding spindle headstock --> Coolant device, manufacturer HYFRA, --> Belt filter, manufacturer Knoll, type KF 200 - year of manufacture 2012, --> Oil mist filter, manufacturer Cobaron

Condition: used, Year of construction: 2005, Technical details: weight of the machine ca.: 8 t dimensions of the machine ca.: 2,95 x 1,6 x 2,36 m chucking diameter: 250 mm Gsdpfxjizlh Hs Ahvjtw swing diameter: 265 mm x-travel: 170 mm z-travel: 200 mm spindle turning speed range: 1.500 U/min spindle bearing diameter: 100 mm Pick-up machine *

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 104440, (Please tell us your offer price) Sale only within Europe, incl. Turkey Price without packaging; delivery condition: FCA (machine location) ===== Technical data see handout. All warranty rights are excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) ===== Gtsdpfxjyh Sc Ns Ahvjw Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.

Condition: used, Year of construction: 2016, Technical details: Gtsdpfx Ahexy I Exjvow total power requirement: 55 kW weight of the machine ca.: 13 t We offer you 4 x EMAG complete € 50.000 free loaded new EMAG is around € 500.000 *

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Manufacturer: EMAG Model: VL 3 Year of manufacture: 2006 Gtsdpfxjympwkj Ahvjw Chuck diameter: 160 mm Swing diameter: 210 mm X-axis travel: 400 mm Z-axis travel: 200 mm Loading time: 2–4 s Main spindle Spindle flange according to DIN 55026 Size: 5 Spindle bearing diameter (front): 80 mm Max. speed: 7500 rpm Main drive AC asynchronous motor Power at 100/40% duty cycle: 16/24 kW Torque at 100/40% duty cycle: 102/158 Nm Feed drive Rapid traverse speed in X: 60 m/min Rapid traverse speed in Z: 30 m/min Feed force in X and Z: 5 kN Ball screw diameter in X and Z: 40 mm Turret Disc turret, 12 stations, cylindrical shank holders to DIN 69880 Shank diameter: 40 mm Driven tools: Maximum output: 12 kW Max. speed: 6000 rpm Max. torque: 37 Nm Full power from: 3000 rpm Turret indexing time: 0.3 s Dimensions and weight Length: 2500 mm Length incl. chip conveyor: 3500 mm Width: 1900 mm Height: 2300 mm Approx. weight: 5500 kg Includes 9 driven tools (axial and radial) and various spare parts Subject to prior sale and errors

Condition: used, Year of construction: 2003, functionality: fully functional, travel distance X-axis: 550 mm, travel distance Z-axis: 200 mm, chuck outer diameter: 200 mm, spindle speed (min.): 6,000 rpm, overall weight: 6,500 kg, power: 40 kW (54.38 HP), year of last overhaul: 2023, Equipment: documentation/manual, Both machines form a single unit. Year of manufacture: 2003, fully functional and still in operation. See photos. The machines are equipped with a chip conveyor serving both machines. A coolant tank was subsequently installed. Accessories include various holders, jaws, and one new AGW. Gtsdpfxjxq Arue Ahvsw The machine can still be inspected under power and in operation.

Condition: used, Year of construction: 2013, functionality: limited functionality, machine/vehicle number: 105032, Technical characteristics: Work Area - Maximum clamping plate diameter: 160 mm - Maximum turning diameter: 160 mm - Maximum machining diameter: 100 mm - Maximum workpiece length: 150 mm - X-axis travel: 700 mm / Rapid traverse in X: 60 m/min - Z-axis travel: 375 mm / Rapid traverse in Z: 30 m/min - Standard integrated automation (number of loading nests by workpiece diameter: 14/(80...200), 18/(30...160), 30/(30...85)) Main Spindle - Spindle according to DIN 55026: Size A5 - Maximum spindle speed: 6,000 rpm - Spindle power (100%/40% duty cycle): 18.1 / 13.9 kW - Spindle torque (100%/40% duty cycle): 77 / 59 Nm Tool Turret with Driven Tools - Tool holders according to DIN 69880: 12 positions - BMT65 - Maximum tool length including holder: 190 mm - Maximum tool speed: 6,000 rpm - Maximum torque: 27 Nm (10% duty cycle), 14 Nm (100% duty cycle) Electrical Equipment - Operating voltage: 400–480 V, 80 A - Connected load: 27 kVA Dimensions - Overall dimensions: Length = 4,350 mm (with chip conveyor), Width = 1,600 mm, Height = 2,500 mm - Weight: 5,500 kg Main Features and Capabilities: - Vertical Design: Optimised for chip evacuation and easy loading/unloading - Control: GE Fanuc FS 32i B - High Precision: Positioning accuracy on X and Z axes ±0.001 mm, Haidenhain linear scales Gtjdoxxwztspfx Ahvow - Main Spindle: High power output and wide speed range - In-process Control: Marposs T25 measurement probe - Automated Loading/Unloading: Parts are automatically loaded and unloaded by integrated automation - Live Tooling: Capable of drilling and milling with driven tools - Tool Life Monitoring with Sister Tool Management - Chip Conveyor, Coolant System, Switchable Dual Cartridge Filter, High Pressure Pump (15 bar) - Fully Enclosed Work Area, Work Area Lighting - Documentation: Electronic available; paper manual not complete Machine Condition: WORKING - Operator panel safety switch is broken

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: 100864, Technical Specifications: Work Area - Maximum clamping plate diameter: 260 mm - Maximum turning diameter: 260 mm - Maximum machining diameter: 220 mm - Maximum workpiece length: 110 mm - X-axis travel: 570 mm / Rapid traverse X: 60 m/min - Z-axis travel: 200 mm / Rapid traverse Z: 30 m/min - Y-axis travel: 40 mm / Rapid traverse Y: 30 m/min - Standard closed automation (number of loading nests per workpiece diameter: 14/(80...200), 18/(30...160), 30/(30...85)) Main Spindle - Spindle according to DIN 55026: Size 6 - Maximum speed: 4,500 rpm - Power at 100/40% duty cycle: 18 / 27 kW - Torque at 100/40% duty cycle: 202 / 303 Nm Tool Turret with Driven Tools - Tool holder shank according to DIN 69880: 12 - VDI40 - Number of turret positions: 12 - Maximum tool length including holder: 190 mm - Maximum speed: 6,000 rpm - Maximum torque: 37 Nm (10% duty cycle), 26 Nm (25% duty cycle), 14 Nm (100% duty cycle) Electrical Equipment - Operating voltage: 400 - 480 V - Connected load: 42 kW Dimensions - Overall dimensions: Length = 2,680 mm (3,820 mm with chip conveyor), Width = 2,040 mm, Height = 2,400 mm - Weight: 6,500 kg Main Features and Capabilities: - Vertical Design: Ensures optimal chip evacuation and easy loading/unloading operations. - Control System: GE Fanuc Series 18i TB. - High Precision: Positioning accuracy in X and Z axes: ±0.001 mm (Heidenhain linear scales). Gtjdpfx Ajxxttfjhvsw - Main Spindle: High power and wide speed range. - Automated Loading/Unloading: Parts are automatically fed and removed via integrated automation. - Driven (live) tools: Enables drilling and milling operations in addition to turning. - Chip conveyor included. - Documentation: Electronic manual not available; printed book manual available. Machine Status: Operational, in working condition.

Condition: repair required (used), Year of construction: 2007, functionality: not functional, machine/vehicle number: P-30010521, Technical specifications: Work Area - Maximum diameter of clamping plate: 260 mm - Maximum turning diameter: 260 mm - Maximum machining diameter: 220 mm - Maximum workpiece length: 110 mm - X-axis travel: 570 mm / Rapid traverse in X: 60 m/min - Z-axis travel: 200 mm / Rapid traverse in Z: 30 m/min - Y-axis travel: 40 mm / Rapid traverse in Y: 30 m/min - Standard closed automation (number of loading magazines by workpiece diameter: 14/(80...200), 18/(30...160), 30/(30...85)) Main Spindle - Spindle according to DIN 55026: Size 6 - Maximum spindle speed: 4500 rpm - Power at 100% / 40% duty cycle: 18 / 27 kW - Torque at 100% / 40% duty cycle: 202 / 303 Nm Tool Turret with Driven Tools - Tool holder for cylindrical shank DIN 69880: 12 - VDI40 - Number of turret stations: 12 - Max. tool length including holder: 190 mm - Maximum speed: 6000 rpm - Maximum torque at 10% duty cycle: 37 Nm, 25% duty cycle: 26 Nm, 100% duty cycle: 14 Nm Electrical Equipment - Operating voltage: 400 - 480 V - Connected load: 42 kW Dimensions Gtodpfx Ahsxxt D Revsw - Total machine dimensions: Length = 2680 mm (3820 mm with chip conveyor), Width = 2040 mm, Height = 2400 mm - Weight: 6500 kg Main Features and Capabilities - Vertical design: Enables optimal chip removal and easy loading/unloading - Control system: GE Fanuc Series 18i TB - High precision: Positioning accuracy on X/Z axes is ±0.001 mm thanks to Heidenhain linear scales - Main spindle: High power and wide speed range - Automated loading/unloading: Parts are loaded and unloaded via integrated automation - Driven tools: Enables drilling and milling operations - Chip conveyor - Documentation: Electronic version not available, printed manual incomplete Machine status: NOT WORKING - Spindle drive - X-axis linear scale - Safety access door (Euchner) - Emulsion solenoid valves x2

Condition: repair required (used), Year of construction: 2015, functionality: not functional, machine/vehicle number: 106374, Technical characteristics: Work Area - Chuck diameter: 160 mm - Maximum weight of chuck + workpiece: 45 kg - Maximum workpiece diameter/height: 100/400 mm - Distance spindle nose to origin of tailstock: 795.5 mm - X1/X2 working stroke: 340 mm / Rapid traverse in X: 30 m/min - Z1/Z2 stroke: 625 mm / Rapid traverse in Z: 30 m/min / Feed force: 18.7 kN - Loading time: 5–6 sec - Standard closed automation (number of loading nests by workpiece diameter): 14/(80–200 mm), 18/(30–160 mm), 30/(30–85 mm) Main Spindle - Spindle according to DIN 55026: Size KK5 - Maximum speed: 8,500 rpm - Power at 100% / 40% duty cycle: 34 / 26.5 kW - Torque at 100% / 40% duty cycle: 75 / 48 Nm Tailstock - Interface: MK3 - Clamping force: 120 N/bar - Clamping stroke: 5 mm Tool Holder with Motorized Tools - Tool holders with cylindrical shank according to DIN 69880: 12 – BMT65 - Number of positions: 2 x 12 (1 gripper per turret) - Maximum speed: 6,000 rpm - Maximum torque at 10% duty cycle: 27 Nm, at 100% duty cycle: 14 Nm Electrical Equipment - Operating voltage: 400–480 V, 120 A Gsdpfx Ahjxxtkwsvjtw - Connected load: 45 kVA Dimensions - Total dimensions: Length = 5,300 mm with chip conveyor, Width = 1,760 mm, Height = 3,650 mm - Weight: 7,500 kg Main Features and Capabilities - Vertical design: Optimized chip evacuation and automatic loading/unloading - Control: GE Fanuc FS 32i - High precision: Positioning accuracy on X and Z axes ±0.001 mm with Heidenhain linear scales - Main spindle: High power and wide speed range - Automation: EMAG O-type – Parts are loaded and unloaded automatically via integrated automation - Live tools: Allows drilling and milling operations - Tool life monitoring with sister tool management - Chip conveyor, coolant unit, switchable dual cartridge filter, high pressure pump (15 bar) - Fully enclosed working area, LED light in working area - Documentation: Available both electronically and as hardcopy book Machine Status: NOT WORKING - X-axis drive - Five electrical switches (Siemens) - Hydraulic pump - Operator panel (in stock, needs installation) - Valve chiller - Pressure switch for oiling unit - Emulsion tank pump - Four emulsion circuit switches (electrovalves) - Pressure switch for hydraulic circuit - Complete hydraulic block