Used vertical turning lathes for sale (190)

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: M250.81009, Technical characteristics: # Main Drive: * Connected Load: 400 V/50 Hz / 43 kW * Main Spindle Drive Power (100% duty cycle / 40% duty cycle): 18 kW / 28 kW * Main Spindle Torque: 300 Nm * Spindle Speed Range: 0-4500 rpm * Spindle Nose: DIN 55026-A6 # Working Area: * Rapid traverse, X-axis: 60 m/min * Rapid traverse, Z-axis: 30 m/min * Feed force, X-axis: 10 kN * Feed force, Z-axis: 10 kN # Control System: * Siemens SINUMERIK 840Dsl * 15'' TFT monitor # Working Accuracy: * Axes (X / Z): ±0.001 mm * Spindle (C-axis): ±0.01° # Tool Carrier: * EMAG Flange Turret, Generation C361 - Capto C5 * Tool shank diameter: TN340009 * Max. tool dimensions: Workpiece-dependent * Tool change times (turret / driven tool): 0.03 min / 0.04 min Nledpfx Ajxvx T Sebwed * Max. speed, driven tool: 6000 rpm * Max. torque, driven tool (100% duty cycle / 10% duty cycle): 15 Nm / 3.5 kW / 40 Nm / 8.5 kW # Coolant System: * Standard delivery pressure / Max. delivery pressure: 7 bar * Pressure range for internal coolant supply: 7 bar (non-adjustable) * Coolant tank capacity: 360 liters # Part Handling: * No part catcher installed. Parts are loaded and unloaded via automation. * Ambient conditions (Room temperature / Humidity): up to approx. 30°C / max. 50% * Noise levels (Sound pressure / Sound power): 78 dB(A) # General Data: * Machine dimensions (L x W x H): 3900 mm x 1500 mm x 3200 mm * Machine weight: approx. 7,000 kg Main Features and Capabilities: # Vertical Design: Optimized for chip evacuation and convenient loading/unloading. # Control: Siemens SINUMERIK 840Dsl with integrated S7-300 PLC and 15'' TFT monitor. # High Precision: Positioning accuracy in X and Z axes of ±0.001 mm. # Main Spindle: High power and wide speed range. # Automated Loading/Unloading: Workpieces are handled automatically through integrated automation systems. # Driven Tools: Capability to use driven tools for extended machining, including drilling and milling operations. # Chip Conveyor # Equipped Chuck: EMB3 Expanding Mandrel (Autoblock) # Capto C5 Tool Holders on Turret (for external/internal machining, 2 units & 2 driven tools) # Tool Load Monitoring: Artis system capability available

Condition: used, Year of construction: 2004, turning diameter 250 mm swing diameter 250 mm Nledpfxozdvgfj Abwsd turning height 250 mm Control Siemens Sinumerik 840 D total power requirement 60 kW weight of the machine ca. 9 t

Condition: ready for operation (used), Year of construction: 2004, travel distance X-axis: 220 mm, travel distance Z-axis: 300 mm, spindle motor power: 15,000 W, spindle speed (max.): 4,000 rpm, total height: 2,650 mm, overall weight: 5,000 kg, controller manufacturer: OKUMA, controller model: OSP-E100L., swivel angle C-axis (max.): 360 °, number of axes: 3, Vertical turning machine manufactured in 2004. This Okuma LVT300 features a maximum turning diameter of 280 mm and a turning length of 200 mm. It includes a spindle speed range of 60–4,000 rpm and a turret with 12 stations for enhanced productivity. If you are looking to get high-quality turning capabilities, consider the Okuma LVT300 machine we have for sale. Contact us for further details. • X-axis rapid traverse: 60,000 mm/min • Z-axis rapid traverse: 30,000 mm/min • Max. turning diameter: ϕ 280 mm • Max. turning length: 200 mm Nledpfjy Shiqox Abwod • Turret stations: 12 • Rotary tool speed (M model): 45–4,500 rpm • Floor space: 1,400 x 3,180 mm Technical Specification Driven Tools Yes

Condition: used, Year of construction: 2019, operating hours: 17,324 h, functionality: fully functional, machine/vehicle number: 06990000471, spindle speed (max.): 5,000 rpm, type of input current: three-phase, rotational speed (max.): 5,000 rpm, input voltage: 400 V, overall weight: 6,500 kg, input frequency: 50 Hz, controller manufacturer: Siemens, controller model: 840d sl, For sale is a used DMG CTV 250 vertical turning center in good condition and ready for operation. The machine is equipped with driven tools, allowing for the economical complete machining of complex workpieces. The scope of supply also includes a parts conveyor belt with 30 shuttles for automated workpiece transport and efficient series production. Nljdpfx Abjzg Dy Eewod If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, TECHNICAL DETAILS - Spindle power : 10,5 [kW] - Spindle speed : 10 000 [Rpm] - Spindle type : A2-4 - X/Y/Z strokes : 280/280/145 [mm] - Rapid traverse : 50 [m/min] - Loading zone X/Z strokes : 110/90 [mm] - Number of tools : 8 - Live tools speed : 6000 [Rpm] - Live tools power : 9,5 [kW] - Tool type : Capto C4 - Dimensions : 1700 x 3000 x 2400 [mm] Nlodpfx Abjuhbgwewsd - Weight : 4000 [kg] - Total installed power : 2,5 [kW] EQUIPMENT - CN Siemens 840D - Axis C

Condition: used, TECHNICAL DETAILS - Spindle power : 10,5 [kW] - Spindle speed : 10 000 [Rpm] - Spindle type : A2-4 - X/Y/Z strokes : 280/280/145 [mm] - Rapid traverse : 50 [m/min] Nlsdpfx Abouhbgdjwod - Loading zone X/Z strokes : 110/90 [mm] - Number of tools : 8 - Live tools speed : 6000 [Rpm] - Live tools power : 9,5 [kW] - Tool type : Capto C4 - Dimensions : 1700 x 3000 x 2400 [mm] - Weight : 4000 [kg] - Total installed power : 2,5 [kW] EQUIPMENT - CN Siemens 840D - Axis C

Condition: used, TECHNICAL DETAILS - Spindle power : 10,5 [kW] - Spindle speed : 10 000 [Rpm] - Spindle type : A2-4 - X/Y/Z strokes : 280/280/145 [mm] - Rapid traverse : 50 [m/min] - Loading zone X/Z strokes : 110/90 [mm] - Number of tools : 8 - Live tools speed : 6000 [Rpm] - Live tools power : 9,5 [kW] - Tool type : Capto C4 - Dimensions : 1700 x 3000 x 2400 [mm] - Weight : 4000 [kg] Nedpfxsuhbf Ts Abwjld - Total installed power : 2,5 [kW] EQUIPMENT - CN Siemens 840D - Axis C

Condition: used, TECHNICAL DETAILS - Max. machining diameter : 120 [mm] - Max. part diameter : 160 [mm] - Max. part length : 120 [mm] - Stroke X/Z : 180/430 [mm] - Quick movement X/Z : 60/90 [m/min] - Spindle type : A2-5 - Rotation speed : 6000 [Rpm] - Spindle power : 10 [kW] - Turret : 12 positions - Tool type : VDI 40 - Motorized positions : 12 - Tool rotation speed : 6000 [Rpm] - Loading / unloading time : 2 [s] - Dimensions : 2300 x 2000 x 2700 [mm] - Weight : 5 650 [kg] - Operating hours : 14830 [H] - Cutting time : 3600 [H] EQUIPMENT - CN FANUC 21-iTB - Coolant tank with HP pump - Chip conveyor Nedpfx Asuhbf Hebwjld

Condition: used, TECHNICAL DETAILS - axes number : 3 CAPACITY - machining diameter : 250 [mm] - travels (X/Z) : 1600 / 300 [mm] - rapid feeds (X/Z) : 60 / 30 [m/min] SPINDLE - spindle nose : DIN55026 - size 6 - power : 18 / 22 [kW] - torque : 202 / 250 [Nm] - speeds : 0 - 6.000 [rpm] - indexing precision axis C : 0,001 [°] TURRET - number of positions : 12 - tool holders : VDI40 - number of rotary positions : 12 - rotary tools speed : 6.000 [rpm] - rotary tools power : 8,5 [kW] MILLING HEAD - number of spindles : 6 - 5 HSK 50 spindles upon Ø : 107,95 [mm] - 1 HSK40 spindle : at center ELECTRICAL SUPPLY - voltage : 400 [V] - installed power : 45 [kW] DIMENSIONS - floor space : 4.550 x 2.810 [mm] - height : 3.600 [mm] - weight : 10.000 [kg] EQUIPMENT - control CNC SIEMENS 840D-sl - 3 colors status lamp - linear scales : HEIDENHAIN - automatic part loader with conveyor - chips conveyor - coolant tank Njdpfeuhbfysx Abweld * with pump 10 bars * with washing gun - coolant through spindle - IFS mist separator - collection of parts supports - collet chuck - 3 live tool-holders

Condition: used, TECHNICAL DETAILS - Spindle power : 10,5 [kW] - Spindle speed : 10 000 [Rpm] - Spindle type : A2-4 - Strokes X/Y/Z : 280/280/145 [mm] - Quick movement : 50 [m/min] - Loading zone strokes X/Z : 110/90 [mm] - Tools number : 8 - Motorized tools number : 2 - Rotary tools speed : 6000 [tr/min] - Rotary tools power : 9,5 [kW] - Tools type : Capto C4 - Dimensions : 1700 x 3000 x 2400 [mm] - Weight : 4000 [kg] - Installed power : 2,5 [kW] Nsdouhbftspfx Abweld EQUIPMENT - CN Siemens 840D - Axis C - Measuring rules on linear axes - Counter spindle - 1 turning tool holder for counter operation - Coolant tank with pump - Chip conveyor

Condition: used, TECHNICAL DETAILS - Spindle power : 10,5 [kW] - Spindle speed : 10 000 [Rpm] - Spindle type : A2-4 - Strokes X/Y/Z : 280/280/145 [mm] - Quick movement : 50 [m/min] - Loading zone strokes X/Z : 110/90 [mm] - Tools number : 8 - Motorized tools number : 2 - Rotary tools speed : 6000 [tr/min] - Rotary tools power : 9,5 [kW] - Tools type : Capto C4 - Dimensions : 1700 x 3000 x 2400 [mm] - Weight : 4000 [kg] - Installed power : 2,5 [kW] EQUIPMENT - CN Siemens 840D - Axis C - Measuring rules on linear axes - Counter spindle - 1 turning tool holder for counter operation Nlsdpjuhbfmsfx Abwod - Coolant tank with pump - Chip conveyor

Condition: used, TECHNICAL DETAILS - Max. turning Ø : 520 [mm] - Strokes (X/Z) : 1000 / 400 [mm] - Max. push on X and Z : 1100 [daN] - Quick feeds (X/Z) : 45 / 30 [m/min] - Ball screw diameter (X/Z) : 50 [mm] - Spindle nose : A2-11 - Spindle motor power : 71 [kW] - Spindle speed : 0 - 3400 [Rpm] - Max. chuck torque : 750 [Nm] - Number of positions on turret : 12 - Number of motorized positions : 12 - Tool-holder type : VDI50 - Machine alone dimensions : 4.050 x 1.960 [mm] - Installation dimensions : 8.500 x 5.000 [mm] - Machine weight : 13.500 [kg] - Installed power : 45 [kW] - Electric supply : 400 V, 50 Hz EQUIPMENT - CN SIEMENS 840D - Interface : RS232 / RJ45 / USB - Touch part sensor Marposs - 1 fixed tool support on table : Capto C6 - Lubricating tank - HP coolant tank : 23 [bars] - Cooling tank - Chip conveyor KNOLL - Part conveyor capacity : 70 - 320 [mm] - Rotary tool holders number : 6 - Fixed tool holders number : 6 Nledpfx Abjuhbfgswsd - Chuck 3 jaws Forkhardt Ø : 400 [mm]

Condition: used, Year of construction: 2003, Technical details: weight of the machine ca.: 9,5 t Nlsdpfx Abjzcnq Iswod

Condition: ready for operation (used), Year of construction: 2001, operating hours: 42,400 h, functionality: fully functional, machine/vehicle number: 0680 0000521, travel distance X-axis: 800 mm, spindle speed (max.): 5,000 rpm, turning length: 300 mm, spindle bore: 79 mm, controller model: Siemens 840D, TECHNICAL DETAILS Turning length: 300 mm Travel distance X-axis: 800 mm Travel distance Z-axis: 300 mm Speed range, main drive: 20 - 5,000 rpm Speed range, C-axis: 0 - 100 rpm Spindle bore: 79 mm Torque, main drive: 200 Nm Torque at the spindle: 240 Nm Torque, clamping device: 28 Nm Rapid traverse rate, X-axis: 100 m/min Rapid traverse rate, Z-axis: 45 m/min Tools and tool magazine Number of tool magazine positions: 12 Speed of driven tool, max.: 6,000 rpm Tool interface: VDI 40 Clamping area in the working area (W x H): 340 x 430 mm Number of T-slots according to DIN 650: 7 Nlodszb Efgspfx Abwed MACHINE DETAILS Control model: Siemens 840D Power, main spindle: 27 / 20 kW Total power requirement: 50 kVA Electrical version - voltage/frequency: 3~ / 400 V / 50 Hz Interface: yes Spindle operating hours: 42,400 h Total operating hours: 93,728 h Dimensions & Weight Machine dimensions (L x W x H): 3,200 x 3,950 x 2,800 mm Chip conveyor dimensions (L x W x H): 3,400 x 1,150 x 2,180 mm Machine weight: 8 t EQUIPMENT High-pressure coolant system (capacity: 500 l) Chip conveyor with oil mist separator / industrial filter IFM 1000CTV Workpiece loading and unloading device with 20 stations Hydraulic chuck (225 mm) Hydraulics 6x various turning tool holders 2x various tool holders (driven)

Condition: used, Year of construction: 2012, turning diameter 320 mm turning height 750 mm Control Siemens max. turning speeds 4500 min/-1 drive capacity - main spindle 26,8 / 20,9 kW max. torque 256 / 200 Nm spindle bore 52 mm spindle head KK A6 (DIN 55026) chucking diameter max. 315 mm number of tool places 8 Pos. Nedpfxezbmzpj Abwold tool taper Capto C5 max. workpiece diameter 50 mm max. workpiece weight 0,5 kg x-axis 450 mm z-axis 300 mm rapid traverse x 45 / z 40 m/min total power requirement 68,3 kW weight of the machine ca. 11,0 t dimensions of the machine ca. L 3,7/4,2 x B 1,6 x H 3,0 m In our opinion, the machine is in very good condition condition and can be inspected under power by appointment. Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as Subject to prior sale!

Condition: good (used), Year of construction: 1989, TITAN SC16.000 | 16-Metre Heavy-Duty CNC Vertical Turning Lathe One of the largest vertical turning lathes available on the market — the TITAN SC16.000 is built for the most extreme heavy machining tasks in energy, mining, shipbuilding, and defense industries. EXCEPTIONAL CAPACITY: • Faceplate Diameter: 12,000 mm • Max. Turning Diameter: 16,000 mm • Max. Workpiece Height: 6,000 mm • Max. Workpiece Weight: 400 TONNES CNC & FEATURES: • Full CNC control system • C-Axis available — for milling and complex contouring • Engineered for continuous heavy-duty production IDEAL APPLICATIONS: • Wind turbine bases and flanges • Large ship propellers and stern frames • Mining drum bodies • Hydro turbine runners • Nuclear & power generation components • Large pressure vessel heads WHY THIS MACHINE? ✔ Extremely rare — machines of this size are very difficult to find ✔ Fully functional — available for inspection under power ✔ CNC control for modern precision requirements ✔ Export possible — experienced in international logistics for oversized equipment Manufacturer: TITAN | Location: REM Bacau, Romania Nljdpsf Utqmofx Abwed Contact us immediately — this machine will not last long. Full inspection welcomed.

Condition: used, Year of construction: 2004, functionality: fully functional, travel distance X-axis: 340 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 215 mm, spindle motor power: 30 W, turning diameter: 200 mm, turning height: 200 mm, rotational speed (min.): 4,000 rpm, Manufacturer: FAMAR Model: ERGO 250 Category: Vertical CNC Lathe Year: 2004 CNC Control: Siemens 840D Specifications Maximum turning diameter: Ø 350 mm Maximum machining diameter: Ø 200 mm Maximum machining height: 200 mm Spindle Integrated electric spindle Chuck: Ø 250 mm Spindle nose: ASA A2-6 Spindle speed: 6,000 rpm Spindle power: 30 kW Axes X-axis: 340 mm (820 mm total) Y-axis: 120 mm (±60 mm) Z-axis: 215 mm C-axis: 360° with 0.001° resolution Heidenhain optical scales on the axes Rapid Traverse Rates Nlsdpfx Abozdu Dpowjd X-axis: 60,000 mm/min Y-axis: 20,000 mm/min Z-axis: 30,000 mm/min Turret 12 positions Powered tools Powered tool speed: 4,000 rpm Powered tool power: 8 kW Turning tools: 25x25 mm Boring bar: Ø 40 mm Equipment Automatic loading/unloading system Pallet shuttle with workpiece pallets Chip conveyor Coolant tank with high-pressure pump Fixed and powered tool holders Manuals and electrical diagrams CE declaration General Data Installed power: 50 kW Machine weight: 10,000 kg Dimensions: 5,200 x 3,200 x 3,200 mm (L x W x H)

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 020033, spindle speed (max.): 5,000 rpm, spindle diameter: 110 mm, controller model: Siemens SINUMERIK, empty load weight: 11,000 kg, counter spindle speed (max.): 5,000 rpm, The machine is expected to be available for approximately €4,000, including loading onto a truck (FOB). TECHNICAL DETAILS Working area X1-axis: 1,190 mm Working area Y1-axis: 120 mm Working area Z1-axis: 260 mm Working area X3-axis: 540 mm Working area Y3-axis: 120 mm Working area Z3-axis: 260 mm Handling space X1-axis: 490 mm Axes and Feed Feed force X1/Z1/Y1: approx. 8/10/10 kN Feed force X3/Z3/Y3: approx. 8/10/10 kN Rapid traverse speed X1/Z1/Y1: approx. 80/40/7.5 m/min Rapid traverse speed X3/Z3/Y3: approx. 40/40/7.5 m/min Acceleration X1/Z1/Y1: 7/7/7 m/s² Acceleration X3/Z3/Y3: 7/7/7 m/s² Spindle Speed at main and counter spindle: 5,000 RPM Power at 100% duty cycle, main spindle: 20 kW Torque at 100% duty cycle: 105 Nm Power at 40% duty cycle: 27 kW Torque at 40% duty cycle: 145 Nm Spindle bore: 65 mm Spindle diameter at front bearing: 110 mm Spindle nose diameter (cylindrical): 140 mm Hydraulic full-stroke cylinder OVS80 - Main spindle Piston stroke: 32 mm Piston area: 34.36 cm² Clamping pressure: 8 to 80 bar Tensile or compressive force at 80 bar: max. 27.2 kN Leakage oil volume at operating pressure 80 bar: max. 2.2 l/min Hydraulic full-stroke cylinder OVS65 - Counter spindle Piston stroke: 32 mm Piston area: 26.1 cm² Clamping pressure: 8 to 100 bar Tensile or compressive force at 100 bar: max. 26.1 kN Leakage oil volume at operating pressure 100 bar: max. 3 l/min Y-axis Slide travel: 120 mm Feed force: 10 kN Rapid traverse: 7.5 m/min Resolution: 0.05 mm Speed of driven tools: 6,000 RPM MACHINE DETAILS Control system: Siemens SINUMERIK Unloading device Swivel angle: 90 degrees Swivel time: 2 s Slide travel: 100 mm Rapid traverse speed: 6 m/min Workpiece weight: approx. 10 kg Workpiece diameter: 200 mm Electrical data Rated power: 45 kW Apparent power: 53 kVA Rated current: 76 A Voltage: 400 V Frequency: 50/60 Hz Dimensions and weight Dimensions with chip conveyor (L x W x H): 2,770 x 4,435 x 2,750 mm Nljdpfx Abszdqdfjwed Weight: approx. 11,000 kg EQUIPMENT Two tool holders with 12 tool positions each, VDI 30 Note: Further technical data can be found in the attached data sheet. The machine is not equipped with a B-axis.

Condition: good (used), Year of construction: 2010, functionality: fully functional, We offer you: CNC vertical turning center Manufacturer: EMAG Type: VSC 250 Duo DD Year of manufacture: 2010 / 2012 Control system: Siemens 840D sl Technical data: Max. turning diameter: 250 mm Max. swing diameter: 260 mm Main spindle: Max. speed: 4,500 rpm Max. torque: 250 / 340 / 460 Nm Spindle bore: 52 mm Chuck diameter: 250 mm Tool turret: Number of turrets: 2 Number of tool positions: 12 Max. tool diameter: 50 mm Max. workpiece weight: 20 kg Max. workpiece diameter: 240 mm Feeds: Rapid traverse (x / z): 45 / 30 m/min Total power consumption: 66 / 75 kW Machine weight: approx. 16 / 18.5 tons There are 3 identical machines available, 2 manufactured in 2010, 1 in 2012. Technical features & accessories: - Marposs measuring system - Open automation - W10 loading portal - Safety guard - Minimum quantity lubrication - In-process quality control - Central coolant supply (not included) - Chip conveyor Accessories, tools and clamping devices shown in the images are only included in the scope of delivery if this is stated in the additional information. Nledszdbv Tepfx Abwed Subject to change and errors in the technical data and information, as well as prior sale!

Condition: good (used), Year of construction: 2010, functionality: fully functional, We offer you: CNC vertical turning center Manufacturer: EMAG Type: VTC 250 LEAN Year of manufacture: 2010 Control: Siemens 840D sl Technical data: Max. turning diameter: 140 mm Max. turning length: 700 mm Max. swing diameter: 376 mm Main spindle: Max. speed: 5,000 rpm Max. torque: 256 Nm Spindle bore: 52 mm Chuck diameter: 250 mm Tool turret: Number of turrets: 1 Number of tool positions: 5 + gripper / 11 + gripper Max. tool diameter: 125 mm Max. tool weight: 10 kg Max. tool length: 120 mm Max. workpiece weight: 20 kg Feed rates: Rapid traverse (x / z): 40 / 30 m/min Total power consumption: 45 kW Machine weight: approx. 12 tons There are 6 identical machines available. Nledpfezdbtxsx Abwed Technical features & accessories: - Open automation - Safety device - Preparation for extraction - Handling infeed and outfeed - Central extraction (not included) - Central coolant supply (not included) - Chip conveyor (1 for 3 machines) Accessories, tools and clamping devices shown in the pictures are only included in the scope of delivery if this is mentioned in the additional information. Subject to changes and errors in the technical data and information, as well as prior sale!

Condition: good (used), Year of construction: 2011, functionality: fully functional, We offer you: CNC vertical turning lathe Manufacturer: EMAG Type: VTC 250 Year of manufacture: 2011 / 2012 Control: Siemens 840D sl Technical data: Max. turning diameter: 250 mm Max. turning length: 630 / 730 mm Max. swing diameter: 140 / 260 mm Main spindle: Max. speed: 3,500 / 4,000 rpm Max. torque: 256 Nm Spindle bore: 50 / 52 mm Chuck diameter: 250 mm Tool turret: Number of turrets: 2 Max. tool weight: 10 kg Max. tool length: 90 mm Max. workpiece weight: 20 kg Feeds: Rapid traverse (x / z): 40 / 30 m/min Total power requirement: 45 kW Machine weight: approx. 14 / 16 tons There are 2 units manufactured in 2011 and 1 unit manufactured in 2012 available. Technical features & accessories: - Year of manufacture 2011: Number of bed and cross slides: 2 - Year of manufacture 2012: Number of bed and cross slides: 1 - Tool monitoring - Protective guard - Collision monitoring - In-process quality control - Central coolant supply (not included) - Chip conveyor Accessories, tools and clamping devices shown in the pictures are only included in the scope of delivery if this is noted in the additional information. Nljdpfszdbtfjx Abwjd Subject to changes and errors in technical data and specifications, as well as prior sale!

Condition: used, Year of construction: 2014, 2 Vertical Turning Machines (Tandem) Manufacturer: EMAG Model: VL 3 Year: 2014 Control: Fanuc 31/32i TECHNICAL SPECIFICATIONS FOR THE VL3 MACHINE (Subject to errors and omissions) WORKING AREA Chuck diameter: 170 mm Swing diameter: 210 mm X-travel: 400 mm Z-travel: 200 mm Loading time (depending on clamping device): 2–4 sec MAIN SPINDLE Spindle flange to DIN 55026, size 5 Spindle bearing diameter (front): 80 mm Maximum spindle speed: 7,500 rpm MAIN DRIVE AC asynchronous motor Power at 40/100% duty cycle: 25/16 kW Full power from spindle speed (100% ED): 1,800 rpm Torque at 40/100% duty cycle: 134/85 Nm FEED DRIVE Rapid traverse speed, X axis: 60 m/min Rapid traverse speed, Z axis: 30 m/min Feed force (X and Z): 5 kN Ball screw diameter (X/Z): 40 mm TURRET Nsdpfx Aboytn Emoweld Cylinder shank mount DIN 69880, 12 positions Shank diameter: 40 mm ELECTRICAL EQUIPMENT according to VDE 0113 Operating voltage: 400 V Control voltage – DC: 24 V; AC: 230 V Frequency: 50 Hz Connected load without/with live tool: 28 / 31 kW Supply line protection: 50 A DIMENSIONS & WEIGHT Length: 2,500 mm Length incl. chip conveyor: 3,600 mm Width: 1,900 mm Height: 2,300 mm Weight: approx. 5,500 kg Linear roller guides in the X-axis located outside the machining area. GANTRY SLIDE INCLUDING SLIDE GUIDE Motor spindle mounting AC synchronous drives for X and Z axes Encapsulated linear measuring systems Resolution all longitudinal axes: 0.001 mm (absolute measurement) Rapid traverse: X axis 60 m/min, Z axis 30 m/min 1 MOTOR SPINDLE size 5 DIN 55026 Max. speed: 7,500 rpm Power at 40/100% duty cycle: 25/16 kW Torque at 40/100% duty cycle: 134/85 Nm HYDRAULIC UNIT with gear pump. CENTRALIZED OIL SUPPLY for lubrication of ball screws and roller guides COOLING UNIT Controls the machine’s thermal balance. Keeps motor spindle, turret, and control cabinet at ambient temperature. TOOL CARRIER SYSTEM 1 12-STATION TURRET with mounting holes Ø40 DIN 69880 Shortest indexing time via electric motor drive Cooled for consistent accuracy Internal coolant supply to tool in cut position WORKPIECE STORAGE & TRANSPORT SYSTEM 1 CIRCULATING WORKPIECE FEEDER Storage capacity: 27 workpieces (Ø 30–85 mm), or 18 workpieces (Ø 30–130 mm), Max. workpiece height: 100 mm Loading height: 1020 mm Chain-type accumulating conveyor with transport prisms Workpieces are NC-positioned for clamping device take-over. The pick-up spindle retrieves blanks from the conversion-free storage and conveyor system. COOLANT AND CHIP REMOVAL SYSTEM 1 COOLANT SUPPLY with integrated coolant tank, capacity approx. 300 l, coolant filter Coolant pump delivery rate: approx. 80 l/min at 7 bar 1 CHIP CONVEYOR Discharge height: 1,250 mm, hinge belt design 1 EMULSION MIST EXTRACTION from the machining area ADDITIONAL EQUIPMENT AND EXPANSIONS WORKPIECE STORAGE & TRANSPORT SYSTEM 1 INTERFACE FOR EMAG TRANSFER AND FLIP UNIT OP20 COOLANT AND CHIP REMOVAL SYSTEM 1 FLUSHING NOZZLES: 2x in working area, 1x in machine base HYDRAULICS & PNEUMATICS 1 MAINTENANCE UNIT FOR COMPRESSED AIR with mounting 1 PICK-UP DEVICE BLOW-OFF (2 nozzles, WITHOUT maintenance unit – see maintenance unit compressed air)

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 850 mm, travel distance Z-axis: 200 mm, spindle motor power: 39,000 W, spindle speed (max.): 6,000 rpm, overall weight: 12,000 kg, number of slots in tool magazine: 16, number of axes: 4, This 4-axis EMAG VSC 200 TWIN OP 50 was manufactured in 2005. It features simultaneous machining of two workpieces, independent X and Z axis drives, and a maximum chuck diameter of 250 mm. With a maximum X travel of 850 mm and a rapid traverse speed of 45 m/min, this machine is designed for medium to large series production. If you are looking to get high-quality turning capabilities, consider the EMAG VSC 200 TWIN OP 50 vertical turning machine we have for sale. Contact us for further details. • Operation Types: OP 50 Njdjy Uvp Ropfx Abweld • Machine Type: EMAG VSC 200 TWIN • Production Type: Medium to Large Series Production • Number of Spindles: 2 • Simultaneous Machining of Two Workpieces: Yes • Independent X and Z Axis Drives: Yes • Independent Measuring Systems: Yes • Driven Tools: Yes • Maximum Chuck Diameter: 200 / 250 mm • Swing Diameter: 260 mm • Loading Time: 2–4 s • Spindle Flange: DIN 55 026 Size 6 • Front Spindle Bearing Diameter: 100 mm • Main Drive Type: Asynchronous Motor • Spindle Power (40% Duty Cycle): 39 kW • Spindle Power (100% Duty Cycle): 28 kW • Torque (40% Duty Cycle): 460 Nm • Torque (100% Duty Cycle): 340 Nm • Full Power Available From: 800 rpm • Rapid Traverse X Axis: 45 m/min • Rapid Traverse Z Axis: 30 m/min • Feed Force X/Z: 11 kN • Ball Screw Diameter X/Z: 50 / 40 mm • Turret Type: Disc Turret • Tool Stations: 2 × 8 • Tool Holder Standard: DIN 69 880 • Tool Shank Diameter: 40 mm • Turret Index Time: 0.3 s • Machine Bed Material: Polymer Concrete MINERALIT® • Automatic Pick-up Loading System: Yes • Automatic Workpiece Loading and Unloading: Yes • Vertical Workpiece Clamping: Yes • Operating Voltage: 400 V • Control Voltage DC: 24 V • Control Voltage AC: 230 V • Frequency: 50 Hz • Connected Load: 66 kW • Fuse Protection: 160 A • Electrical Standard: VDE 0113 • Available Control Systems: FANUC 31i / 32i, Siemens SINUMERIK 840 D, Bosch Rexroth MTX • Workpiece Handling: Conveyor-Based Pick-up Automation The technical specifications may vary slightly, as these are custom-made machines! Technical Specification Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 850 mm, travel distance Z-axis: 200 mm, spindle motor power: 39,000 W, spindle speed (max.): 6,000 rpm, overall weight: 12,000 kg, number of axes: 4, This 4-axis EMAG VSC 200 TWIN was manufactured in 2005. It features simultaneous machining of two workpieces, independent X and Z axis drives, and a maximum chuck diameter of 250 mm. With a rapid traverse of 45 m/min on the X axis and a robust turret with 16 tool stations, this machine is designed for medium to large series production. If you are looking to get high-quality turning capabilities, consider the EMAG VSC 200 TWIN vertical turning machine we have for sale. Contact us for further details. • Operation Types: OP 40 • Machine Type: EMAG VSC 200 TWIN • Production Type: Medium to Large Series Production • Number of Spindles: 2 Nlodpfjy Uvf Esx Abwjd • Simultaneous Machining of Two Workpieces: Yes • Independent X and Z Axis Drives: Yes • Independent Measuring Systems: Yes • Driven Tools: Yes • Maximum Chuck Diameter: 200 / 250 mm • Swing Diameter: 260 mm • Maximum Workpiece Diameter: 200 mm • Maximum X Travel: 850 mm • Z Travel: 200 mm • Loading Time: 2–4 s • Spindle Flange: DIN 55 026 Size 6 • Front Spindle Bearing Diameter: 100 mm • Maximum Spindle Speed: 6,000 rpm • Main Drive Type: Asynchronous Motor • Spindle Power (40% Duty Cycle): 39 kW • Spindle Power (100% Duty Cycle): 28 kW • Torque (40% Duty Cycle): 460 Nm • Torque (100% Duty Cycle): 340 Nm • Full Power Available From: 800 rpm • Rapid Traverse X Axis: 45 m/min • Rapid Traverse Z Axis: 30 m/min • Feed Force X/Z: 11 kN • Ball Screw Diameter X/Z: 50 / 40 mm • Turret Type: Disc Turret • Tool Stations: 2 × 8 • Tool Holder Standard: DIN 69 880 • Tool Shank Diameter: 40 mm • Turret Index Time: 0.3 s • Machine Bed Material: Polymer Concrete MINERALIT® • Automatic Pick-up Loading System: Yes • Automatic Workpiece Loading and Unloading: Yes • Vertical Workpiece Clamping: Yes • Operating Voltage: 400 V • Control Voltage DC: 24 V • Control Voltage AC: 230 V • Frequency: 50 Hz • Connected Load: 66 kW • Fuse Protection: 160 A • Electrical Standard: VDE 0113 • Approximate Machine Weight: 12,000 kg • Available Control Systems: FANUC 31i / 32i, Siemens SINUMERIK 840 D, Bosch Rexroth MTX • Workpiece Handling: Conveyor-Based Pick-up Automation The technical specifications may vary slightly, as these are custom-made machines! Technical Specification Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 850 mm, travel distance Z-axis: 200 mm, spindle motor power: 39,000 W, spindle speed (max.): 6,000 rpm, workpiece diameter (max.): 200 mm, overall weight: 12,000 kg, number of axes: 4, This 4-axis EMAG VSC 200 TWIN vertical turning machine was manufactured in 2005. It features a maximum chuck diameter of 200/250 mm and a swing diameter of 260 mm. With independent X and Z axis drives, it allows for the simultaneous machining of two workpieces. If you are looking to get high-quality turning capabilities, consider the EMAG VSC 200 TWIN machine we have for sale. Contact us for further details. • Operation Type: OP 20 • Machine Type: EMAG VSC 200 TWIN • Production Type: Medium to Large Series Production • Number of Spindles: 2 • Simultaneous Machining of Two Workpieces: Yes • Independent X and Z Axis Drives: Yes • Independent Measuring Systems: Yes • Driven Tools: No • Maximum Chuck Diameter: 200 / 250 mm • Swing Diameter: 260 mm • Maximum Workpiece Diameter: 200 mm • Loading Time: 2–4 s • Spindle Flange: DIN 55 026 Size 6 • Front Spindle Bearing Diameter: 100 mm • Maximum Spindle Speed: 6,000 rpm • Main Drive Type: Asynchronous Motor • Spindle Power (40% Duty Cycle): 39 kW • Spindle Power (100% Duty Cycle): 28 kW • Torque (40% Duty Cycle): 460 Nm • Torque (100% Duty Cycle): 340 Nm • Full Power Available From: 800 rpm • Rapid Traverse X Axis: 45 m/min • Rapid Traverse Z Axis: 30 m/min • Feed Force X/Z: 11 kN • Ball Screw Diameter X/Z: 50 / 40 mm • Turret Type: Disc Turret • Tool Stations: 2 × 8 • Tool Holder Standard: DIN 69 880 • Tool Shank Diameter: 40 mm • Turret Index Time: 0.3 s • Machine Bed Material: Polymer Concrete MINERALIT® • Automatic Pick-up Loading System: Yes • Automatic Workpiece Loading and Unloading: Yes • Vertical Workpiece Clamping: Yes • Operating Voltage: 400 V • Control Voltage DC: 24 V • Control Voltage AC: 230 V • Frequency: 50 Hz • Connected Load: 66 kW • Fuse Protection: 160 A • Electrical Standard: VDE 0113 • Approximate Machine Weight: 12,000 kg • Available Control Systems: FANUC 31i / 32i, Siemens SINUMERIK 840 D, Bosch Rexroth MTX • Workpiece Handling: Conveyor-Based Pick-up Automation The technical specifications may vary slightly, as these are custom-made machines! Nodpfx Aey Uuybebweld Technical Specification Driven Tools No