Automatic turret lathe buy used

Recognised location: Ashburn (US) (Change)
Enter e-mail address
or
Move
4
turning diameter over bed: 32 mm spindle passage: 60 mm turning length: 45 mm revolution per minute: [...] (spindle) U/min rotary speed of motor: 1450 U/min total power requirement: 5,5 kW weight of the machine ca.: 2,4 t space requirement of the machine approx.: L:2,0x1,0x1,8 m cam-controlled automatic lathes There are 4 machines on sale (3x C29 and 1 x B60) We are offering these machines per single item, but on request as a package. accessoires are available on request. max. travel of turret ... more
6
with Strehl body, swiveling top slide, program plug box Flat table turret spindle bore 34 mm material with outstanding clamping tube 25 mm 125 mm gr gr distance between Spindle flange and the tool carrier 190 mm revolver Flat table 236 mm center height 30 mm rapid traverse sled d. 6 m rpm Working feed sled d. 10 1000 mm / min total run / Commute Along the sled 120/60 mm Plan 60/60 [...Technical data truncated] Qfwyun2q more
3
spindle passage: 29 mm Number of tools: 6 St. turning length: 64 mm spindle revolutions per minute : [...] U/min total power requirement: kW Yqaay8 weight of the machine ca.: 1,1 t space requirement of the machine approx.: L:2,0x1,0x1,8 m cam-controlled automatic lathes There are 4 machines on sale (3x C29 and 1 x B60) We are offering these machines per single item, but on request as a package. Accessoires are available on request. more
3
number of spindles: 1 Stück spindle passage: 20 mm turning length: 350 mm turning diameter over bed: 240 mm revolution per minute: 23-4457 U/min spindle bore: 22 mm material length: 2000 mm voltage: 3x380/50Hz V / Hz total power requirement: 8 kW weight of the machine ca.: ca. 1,5 t space requirement of the machine approx.: L:1,84xB:0,9xH:1,8 m One Spindle - Cam Controlled Automatic Lathe with bar loader number of travels: 5 axis Ys0rxpyf turret support travel longtidudinal 60mm, swing 125mm tu... more
3
number of spindles: 1 spindle passage: 20 mm turning length: 350 mm turning diameter over bed: 240 mm revolution per minute: 23-4457 U/min spindle bore: 22 mm material length: 2000 mm voltage: 3x380/50Hz V / Hz total power requirement: 8 kW weight of the machine ca.: ca. 1,5 t space requirements of the machine approx.: L:1,84xB:0,9xH:1,8 m One Spindle - Cam Controlled Automatic Lathe with bar loader number of travels: 5 axis Ys02ivmg turret support travel longtidudinal 60mm, swing 125mm turret ... more
1
Elect./Voltage: 220/440 V, 60 Cy, 3 Ph. Bbuqvkgt0r 78" (2000 mm) Max. between centers, 9.8" round or 7" square (250 mm round or 178 mm square) max. part dia. with revolving steady rest, 6.5 HP main motor, 0 - 4,500 RPM spindle speeds; 0.5 HP hydraulic motor. -- Automatic controlled variable speed carriage with tool post and revolving steady rest, 0 - 32 FPM max. working speed, carriage return speed 33 FPM. -- Special cutting system with: (1) Roughing & (1) finish gouge for simultaneous rou... more
6

Vertical Turret Lathe - Double Column NILES DKZ 6300 x 3500

ab Werksstandort,unter StromGermany dealership location
6405 km
1983
used
faceplate diameter 5300 mm swing diameter 6300 mm turning height 3500 mm max. ram stroke 1800 mm table load ca. 80 t faceplate turning speed range 0,35 - 14 U/min feed range 0,063 - 11,2 mm/min swivel range of slides - vertical +/- 30 ° cross rail - adjustment 3300 mm tool travel 3450 / 1000 mm turning tool - shaft cross cut 50 x 50 mm crossrail -rapid travel 500 mm/min Rpxo82ji7 rapid travers - turret head, hor./vertical 960 mm/min dimensions of the machine ca. 14,2 x 8,2 x 9,7 m total power r... more
6
faceplate diameter 3200 mm swing diameter 5100 mm turning height 2505 mm cross rail - adjustment 1500 mm max. ram stroke 1250 mm slide adjustment 2000 mm control Siemens 8 T tool changer 16 STK table load 60 t faceplate turning speed range -stepless- 0,8-100 U/min feed 0,0 1-1000 mm/min rapid traverse 6000 mm/min drive of main spindle 75 kW Latmp weight of the machine ca. 70 t dimensions of the machine ca. 9,3 x 6,1 x 6,0 m machine is in an excellent condition!! with div. acessories (photo... more
5
turning diameter:33 mm turning length:320 mm control:Fanuc 310 i max. bar diameter through the spindel:33 mm Gmxujo7fu number of controlled axis:10 y-axis:350 mm turning speed range:8000 U/min power capacity:7,5/5,5 kW rapid speed:40 m/min number of tapers in turret head:2x 8 number of driven tools in turret:2x 8 Spindel speed of driven tools:6000 U/min Spindelpower on driven tool:1,1/0,55 kW tail stock:Gegenspindel/ sub spindle dimensions:4,75 x 1,68 x 1,96 m weight of the machine ca.:6,0... more
5
faceplate diameter:800 mm swing diameter:1100 mm B3fvek7zo turning height:750 mm control:820T Siemens tool change unit:15-fach workpiece weight:4000 kg turning speeds:4-650 U/min feed stepless:1-4000 mm/min rapid traverse:10 m/min max. ram stroke:600 mm 3-jaw chuck:800 mm total power requirement:40 kW weight of the machine ca.:16 t dimensions of the machine ca.: m more


automatic ...
every day

New machines via email!

Be informed!
5
faceplate diameter:4000 mm swing diameter:4400 mm turning height:2060 mm slide stroke:1200 mm ram head dimension:250 x 250 mm faceplate turning speed range:1 - 92 U/min cross rail adjustment:1800 mm workpiece weight:30 t feeds:1 - 2000 mm/min main drive motor:55 kW total power requirement:80 kW weight of the machine ca.:64 t dimensions of the machine ca.:9,0 x 7,2 x 6,6 m Vsetae with CNC SIEMENS 840 D for 2 axis tool Basic holder KM 80 In process camera screen coolant attachment and chip conve... more
1
Elect./Voltage: 220/440 V, 60 Cy, 3 Ph. Ihipdcd Hydraulic, automatic lathe for small wooden parts production; 4.75" (120 mm) max. dia. and 6-11/16" (170 mm) max. length with no boring, 4-3/4" with boring. -- Mandrel motor 5 HP, speeds at: 2,000, 2,540, 2,750, 4,010 & 5,140 RPM; hopper feed with 39-3/8" (1000 mm) max. blank piece length and automatic ejection of wooden parts. -- Equipped with: Chucking unit, Automatic tool holder carriages with (1) Copy head, (1) roughing tool, (1) finishin... more
6
spindle passage: 23 mm z-axis: 150 mm turning length: 150 mm stroke: x+z Achse / Axis/eje/eixo/os = 30 mm facing movement (x-axis): 30 mm longitudinal traverse (z-axis): 30 mm control: Num 760T spindle turning speed - continuous: 0-3000 / 0-6000 U/min feed speed: x/y: 5 mm/min feed speed: z: 10 mm/min tool turret: 2 Stück/pcs mit je/each 6 tools operating pressure: max. 45 bar total power requirement: 8,0 kW weight of the machine ca.: 2,2 t dimension machine [...]: 2,45x1,3x2,2 m dimensions of ... more
5

Turret Lathe WEILER RDU 260 /28

Bünde bei BielefeldGermany dealership location
6460 km
used
turning diameter over bed 260 mm spindle passage 28 mm turning length 330 mm centre height 125 mm bed width 160 mm Ys8ykje2k bed length 800 mm spindle turning speed range 12 von 115-3000 U/min swing diameter over slide rest 125 mm travel of turret slide 100 mm turret head - bore/travel 140 mm cutt-off slide way 90 mm taper in turret slide 6 max. distance betw. turret head ans turn spindle 330 mm total power requirement 0,37 / 0,88 kW weight of the machine ca. 360 kg dimensions of the machine c... more
4
faceplate diameter 914 mm swing diameter 1166 mm turning height 942 mm distance between table and cross rail 673 mm table load 8 t ram head - cross travel 640 mm faceplate turning speed range 11 - 466 U/min transmission ratio 4 rapid traverse 5000 mm/min feeds infinitely variable 0 - 400 mm/min voltage 380 V 2peitq main drive DC 42 kW control SIEMENS 820T total power requirement 65 KVA weight of the machine ca. 9,5 t dimensions of the machine ca. 2,3 x 2,4 x 3,8 m - in 1989 Machine overhou... more
6
- 6 Station turret Cbwlpyro - spindle bore 61 mm - max. material stroke with one switching 90 mm - max. turning length with one switching 80 mm - max. Drilling depth 70 mm - max. drill D 8 mm - max. thread length 32 mm - max. spindle Speed at turning 48 - 1500 rpm - max. Speed at thread cutting 24 - 750 rpm - max. stroke of turret: 80mm - min. distance between collet and turret: 72mm - max. distance between collet and turret Abstand 188 mm - power consumtion: 5,5 kW - weight ca. 22... more
3
faceplate diameter:2800 mm swing diameter:3500 mm turning height:2315 mm faceplate turning speed range:2,1 - 1112 U/min max. workpiece weight:12.000 kg feeds:0,044 - 8 mm/U ram head - vertical travel:1000 mm ram head swiveling:+/- 45 ° turret head - vertical travel:800 mm total power requirement:50 kW weight of the machine ca.:35 t dimensions of the machine ca.:5,2 x 4,4 x 5,1 m Mljuf with two vertical heads more
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. Yrrjoc MATTISON 57-F Manual Production Rotary Lathe with extended bed. --General data: 42" Cut Length Capacity with working dimensions 4" x4"max. x 3/4" x 3/4" min. -- 96" extended length of stock handled between centers. 17" max. diameter stock swing over carriage. --Drives: Spindle drive motor: 15 HP with spindle dia. 2-5/8" and arbor speed of 2,700 RPM cutter spindle motor. 1 HP & .5 HP work-piece rotation motor, (variable via pulleys). -- In... more
3

Chucking Automatic Lathe-Single Spindle HESTIKA HM 26

D - 77815 Bühl-WeitenungGermany dealership location
6593 km
1966
used
bore diameter 26 mm swing diameter 140 mm DIN 52022 Gr. 4 spindle diameter in front bearing 55 mm work height max. 1050 mm turning speed range 205 - 3280 U/min rapid speed 2 m/min feed speeds infinitely variable 0 - 1200 mm/min number of slides 3 total power requirement 3,5 kW weight of the machine ca. 1,7 t dimensions of the machine ca. 1,80 x 1,00 x 1,60 m Uqvqibp7u stepped drive, with autom. electro-magnetic speed control for drive with 3 slides, with electrohydr. control acc.: variou... more
6
table diameter: 2000 mm faceplate diameter: 1800 mm swing diameter with side support: 1850 mm swing diameter without side support: 2000 mm cross rail adjustment: 1150 mm M8yh7 turning height: 1250 mm vertical adjustment of the supports: innen/außen 30° mm distance face plate/tool carrier: 1325 mm workpiece weight: 6000 kg workpiece height max.: 1250 mm dimensions electric cabinet LxWxH: 1,2x0,7x1,15 m revolution per minute: 1-50 / 2step U/min height over floor: 950 mm feed: 0,01-6,3 / 12 step m... more
1
faceplate diameter:1450 mm swing diameter:1700 mm turning height:1000 mm max. turning diameter:1670 mm ram stroke:700 mm number of spindle speeds:180 U/min. dimensions:5 x 5 x 3,5 m Motor power:55 kw weight of the machine ca.:17 t DRO: tool holder:Pentagonal Yii23ndie Use, in 2007 retrofitted Vertical Turret Lathe with CNC Fagor 8055-T more
6
- 6 Station turret - spindle bore 61 mm - max. material stroke with one switching 90 mm - max. turning length with one switching 80 mm - max. Drilling depth 70 mm - max. drill D 8 mm - max. thread length 32 mm Eh3s3uuno - max. spindle Speed at turning 48 - 1500 rpm - max. Speed at thread cutting 24 - 750 rpm - max. stroke of turret: 80mm - min. distance between collet and turret: 72mm - max. distance between collet and turret Abstand 188 mm - power consumtion: 5,5 kW - weight ca. 2... more
4
faceplate diameter:3500 mm swing diameter:5900 mm Mxnpn turning height:1300 mm slide stroke:900 mm faceplate turning speed range:0,1 - 30 U/min total power requirement:70 kW weight of the machine ca.: t dimensions of the machine ca.: m CNC HEIDENHAIN TNC 145 CS 2 Ram´s more
1
Elect./Voltage: 230/460 V, 60 Cy, 3 Ph. 3y8emakf LOBO-COYER 'CP-168A' Hydraulic Copy Lathe. 26 1/2" length cap. with 4" min. length of stock and 1/2" - 4" max. diameter cap., hopper feed with automatic chucking, square or round stock can be hopper fed. -- Equipped with: 7.5 HP Spindle motor, 1,800 - 3,200 RPM spindle speed adjustable by pulley change, 3 HP hydraulic motor. -- Complete with: Swivel control panel & safety wire mesh accross the front of machine; unit is capable of producing ... more
2
workpiece dia. Ø 24 mm workpiece feed -automatic 75 mm thread dia. 30 mm turning speed range - spindle 27 - 3750 U/min tool turret 8 Plätze max. travel of the tool turret 70 mm Srnyhk total power requirement 5,5 kW weight of the machine ca. 1,9 t dimensions of the machine ca. 2,10 x 0,85 x 1,50 m with 2 cross and 2 parting-off slides, with thread chaser device and multi edge turning device acc.: bar loading magazine IEMCA AS 325/32, various change gears more

single spindle automatic lathe Traub A 20

Max-Planck-Straße, 58840 Plettenberg, DeutschlandGermany
6458 km
1995
good (used)
Bbz9vfud7x more
1
faceplate diameter:3500 mm Bax9hglabr swing diameter:3800 mm turning height:2300 mm max. turning diameter:3800 mm table load:40 t table speeds:10 - 38 1/min transmission ratio:2 Stufen cross travel of ram-slide:rechts: 2500 mm cross travel of ram-slide:links: 2200 mm Travel of Ram (vertical):1500 mm total power requirement:70 kW dimensions of the machine ca.: m weight of the machine ca.: t Rams:2 Stück more
6
faceplate diameter 2500 mm swing diameter 2800 mm turning height 1500 mm 3vtovf3dn workpiece weight 12000 kg max. ram stroke 1300 mm total power requirement 45 kW weight of the machine ca. t dimensions of the machine ca. m more
5
faceplate diameter:2800 mm swing diameter:6000 mm turning height:2500 mm faceplate turning speed range:2,12 - 112 U/min max. ram stroke:1000 mm max. workpiece weight:60.000 kg feeds:0,71 - 128 mm/min rapid traverse:2 m/min total power requirement:65 kW weight of the machine ca.:55 t 02p977u3d dimensions of the machine ca.: m DRO Heidenhain more
1
Elect./Voltage: 230/460 V, 60 Cy, 3 Ph. Glmzmofv3 NC automatic copy lathe for symetric and asymetric parts. 76" max. length cap with automatic hopper feed of 65" (1700 mm) stock capacity. -- Single spindle copy (from template or sample) shaping and sanding lathe with SIEMENS "Sinumnerik 810" NC control, color graphics display; can program spindle speeds, feedrate, parameters etc for each profile. 76" Max. length with double end drive, 4 HP motor, shaper head with 5.5 HP motor. -- Variable ... more
1

Chucking Automatic Lathe-Single Spindle BOLEY BDA-H

D - 77815 Bühl-WeitenungGermany dealership location
6593 km
1981
used
turning diameter ca. 100 mm turning length 100 mm Uqvp8qkjt number of slides 2 spindle hollow 42 mm face slide travel 55 mm turning speed range max. 5000 U/min greates pass round over bed 240 mm feed speeds 20 - 400 mm/min rapid speed 6 m/min total power requirement 2,2 kW weight of the machine ca. 1,1 t range L-W-H 2,80 x 1,20 x 2,00 m with connector field control more
2

multispindle automatic lathe Schütte SF 32 - 6 DNT

Max-Planck-Straße, 58840 Plettenberg, DeutschlandGermany
6458 km
1985
excellent (used)
Bbz9spzrjo more
5
faceplate diameter:2500 mm swing diameter:3300 mm turning height:2280 mm Myco9 max. workpiece weight:30 t table speeds::1-150 U/min main drive:51 kW feeds:1-4.000 mm/min rapid speed:12/8 (X/Z) m/min Overall size:7.530 x 5.440 x 7.700 mm weight of the machine ca.:51 t CNC controller:Siemens 840D automatic tool changer:12 fach more
6

Vertical Turret Lathe - Single Column FRORIEP DS 12 CNC

ab Werksstandort,unter StromGermany dealership location
6405 km
used
faceplate diameter 1400 mm swing diameter 1450 mm turning height 1630 mm max. workpiece weight 6300 kg reus 10 - 315 U/min cross rail adjustment - vertical 1250 mm max. ram stroke 1100 mm Control Siemens 840 D total power requirement 0 kW weight of the machine ca. 0 t dimensions of the machine ca. 4,35 x 2,85 x 5,1 m Bbmisiyeam * general reconditioned and modernized in 2001 * CNC - control by SIEMENS SINUMERIK 840 D * chip conveyor machine wasnt in use in production since 2008 more
5
faceplate diameter:2240 mm swing diameter:2500 mm C2ljnkm88 turning height:1600 mm slides vertical travel:1200 mm workpiece weight:16 t horizontal adjustment:1390 mm angle adjustable from - to:+ - 30 Grad faceplate turning speed range:1,6 - 80 U/min main drive motor:65 kW total power requirement:70 kW weight of the machine ca.:36 t dimensions of the machine ca.:5,4 x 5,1 x 5,0 m In 2008 complete overhauled with new electric with two vertical RAM´s 4-axes digital readout HEIDENHAIN 2 gear ste... more
1
Elect./Voltage: Ikh02kn HAPFO AP-5000/HYDRO Hydraulic Copy Lathe. -- Specifications: 62-3/4" Max. chucking cap., 59" copy length and 9-3/4" max. turning dia.; (1) 2.3/1.75 HP two-speed spindle motor, 0.5 HP DC motor feed drive for carriage. Feed electronic infinitely variable 0 - 11.5 FPM; (1) innovative hydraulic tracing device with 6" stroke and only 2-3/8 ounce pressure, center height 9-27/32". -- Includes: (1) HSS Copy lathe tool, original sample tracing device, dust collection hood, r... more
4
Equipment: 5 hydraulic driven supports at the back, movable over the machine width. 3 units at the top. Ughlyxxeo Maximum workpiece length: 1200 mm. Maximum workpiece diameter: 180 mm. Automatic cycle: workpiece tension, walking ahead and walking backward of the trimming units ( according to the model), cutting fine by means of the profile-knifes, returning. Motors: shaft 12 kW (with brake) more
6
- - Multi-spindle automatic lathe SCHÜTTE SF 32 PC Double recirculator series 4 no. 10 Year of construction: 1999 Spare parts for sale: Tool holders Technical specifications: Position 1 transverse slotted slide, position 2 along drilling slides Position 2 crosswise slit saddle wide, position 2 along cross sledge Position 3 crosswise slitting slit + 2nd stop, position 3 along cross slides Position 4 crosswise slides wide, position 4 along cross sledge Yv97ydcz Position 5 cross cross sled... more
6

Vertical Turret Lathe - Single Column BERTHIEZ 9340

ab Lager FrankreichGermany dealership location
6378 km
1964
used
faceplate diameter 1800 mm swing diameter 3200 mm turning height 1600 mm Turning diameter bis Zentrum - 2900 mm faceplate turning speed range 2,5 - 125 U/min height under tools 1660 mm ram stroke 960 mm Qmdw3doir swivelling of ram + - 45 Grad side head - cross travel 600 mm main drive motor 40 kW weight 26 t dimensions of the machine ca. 4,8 x 3,5 x 6,1 m • Machine had been refurbished in 2012 geometrically; • 2-axis digital display • Reconditioning in 2012 more
6
faceplate diameter 1000 mm swing diameter 1150 mm turning height 750 mm travel -x axis 1100 mm travel -z axis 750 mm power requirement 60 kW turning speed range - faceplate 10-643 U/min feeds 0,1-2000 mm/U workpiece weight 8000 kg turret I 4 Wkzg. turret II 4 Wkzg. control CNC Sinumerik 880 T total power requirement 128 kW weight of the machine ca. 25 t overhauled in 2014! - guideways grounded Zbnln33xr - main motor and 2 axis motors overhauled - ball screws renewed - all tubes renewed - me... more
5
faceplate diameter:1400 mm swing diameter:1600 mm turning height:1200 mm max. ram stroke:700 mm faceplate turning speed range -stepless-:4,5 - 250 U/min main drive motor:72 kW Bbebrqa2f0 feeds:0,03 - 6,3 mm/U total power requirement:90 kW weight of the machine ca.:18 t dimensions of the machine ca.: m Machine geometrical overhauled in 2010 . 1 vertical 5-station turret head, with copying device 1 horizontal side head, with copying device 2-axes digital readout pneumatic 3-jaw power chuck spla... more
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Cs0xki8o GOODSPEED - COYER CP-168 A Back Knife Lathe -- Manufactured machine authorized by GOODSPEED.° 26.7" Length cap., and 1/2" - 3.9" max. dia. [...] with: -- 10 HP Spindle motor, 1,800 - 3,200 RPM spindle speed adjustable by pulley change. -- 3 HP hydraulic feed motor, 2-speed carriage. -- Swiveling control panel, PLC sequence controller built into separate control cabinet. -- (3) pressure gauges, automatic way & support collar lubrication. Featu... more
6
faceplate diameter 1600 mm swing diameter 1710 mm turning height 1150 mm Max ram stroke 750 mm turning height 1150 mm ram head swiveling + - 45 ° total power requirement kW weight of the machine ca. t dimensions of the machine ca. m 8ax28729k more
4
faceplate diameter:2000 mm swing diameter:2400 mm turning height:2000 mm max. workpiece weight:20.000 kg vertical adjustment of the crossrail:----- mm travel -x axis:2400 mm travel -y axis:2400 mm travel -z axis:2000 mm control:Siemens 840D Bcyqyfkla number of controlled axis:3 turning speed range:2 - 224 U/min power capacity:80 kW rapid speed:6 m/min max. torque on the faceplate: no. of tools in the magazine:60 Stück milling drive:37 kW turning speed range - milling:2000 U/min Number of w... more
4
turning diameter over bed 60 mm spindle passage 15 mm turning length 100 mm total power requirement 5 kW weight of the machine ca. 1,2 t dimensions of the machine ca. 5 x 1,5 x 1,5 m Gcv2izv With bar feed FMB Mini Turbo 3000/15. Control: Siemens 810 T. more
3
faceplate diameter 1180 mm swing diameter 1200 mm turning height 1000 mm no. of the slides 2 swivel range of slides - vertical +/- 30 ° faceplate turning speed range 3,5 - 112 U/min electrics - voltage/frequency 380/50 V/Hz feed range 0,25-5,6 und 0,063-1,4 mm mm/U Ufotpp7z weight of the machine ca. 15 t dimensions of the machine ca. 2,5,0 x 2,5,0 x 3,6 m more
6
Max. length: 1400 mm Max. diameter: 250 mm Hopper feed at the rear Tp3vfoycj Reproductive tracer (tamplate or real modell) 2 front units and 3 jump-in knife tools on top more
4
turning diameter over bed 125 mm spindle passage 10 mm F7jrsj2 turning length 100 mm turning speed range 1000 - 10000 U/min Boring depth max. 70 mm speed control shaft 0,20 - 284 U/min total power requirement 5,00 kW weight of the machine ca. 2,50 t dimensions of the machine ca. 6,00 x 1,50 x H2,00 m Bar feeder IEMCA CS112/42/CT more
5
faceplate diameter 1250 mm swing diameter 1600 mm turning height 1250 mm control Siemens type 840D workpiece weight 8 t Tools changer for 12 tools chip conveyor ram head dimension 250x200 mm slide adjustment 1000 mm 7wmbmxwn3 total power requirement 56 kW weight of the machine ca. t dimensions of the machine ca. m more


automatic ...
every day

New machines via email!

Be informed!

to

to

Change search
AUTOMATIC TURRET LATHE
SELL IMMEDIATELY
on Europe's market leader for as little as € 0,49 per ad.
Find out more now


Phone: +44 (0) 20 806 810 84
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machineseeker chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close