Used Index C29 for sale (163)

Condition: used, Year of construction: 1997, turning diameter 420 mm turning length 400 mm spindle tunring speed 5.000 U/min Kljdpfx Ajylp Awohvjp power capacity 44 kW bar material dia. 60 mm In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: excellent (used), Year of construction: 2023, X/Y/Z: 360/120/750 mm Bar capacity: 82 mm 12-station driven tool turret C-axis Y-axis VDI 40 NC tailstock MK 5 with foot switch Foot switch for clamping on main spindle Air curtain Signal light Coolant device Chip conveyor Hydraulic holding brake ShopTurn Transmit function (cylindrical machining on outer and face surfaces) iXpanel (control system operation and organization extension) Gripper tray Kljdsw Nxyajpfx Ahvep Small tool package

Condition: ready for operation (used), Year of construction: 2018, spindle speed (max.): 7,000 rpm, bar diameter (max.): 42 mm, travel distance X-axis: 70 mm, travel distance Y-axis: 70 mm, controller manufacturer: FANUC, controller model: 31i-B, number of axes: 10, This 10-axis Index C100 horizontal turning machine was manufactured in 2018. It features impressive axis travels of 70 mm in both X and Y directions, and 400 mm in Z. The machine includes three turrets with driven tools capable of 8000 rpm, and a counter spindle diameter of 42 mm. If you are looking to get high-quality turning capabilities, consider the Index C100 machine we have for sale. Contact us for further details. • Production hours: approx. 15,000 h • Spindles: Main and counter spindles with D42; counter spindle Ø42 mm, 7000 rpm • Turrets: 3x VDI25 with Index W-serration; driven tools on all three turrets, up to 30 driven tool positions, 8000 rpm • Coolant system: Emulsion; flushing beside main and counter spindle; through counter spindle; 8 bar pump; 18 bar pressure-increasing pump (no Eco Fluid 80 bar); mechanical coolant filter (no paper filter); coolant tower for cooling main/counter spindles and electrical cabinet • Software/Functions: Milling cycles Transmit / Tracyl • Monitoring: Index Motorforce tool monitoring for Fanuc • Interfaces/Preparation: Ünimag4 interface for bar feeder; preparation for oil mist unit (mechanical flange D200 mm; electrical Harting plug 3x240 V) • Clamping: SK45 in main spindle (without collets); E173 in sub spindle (without collets) • Storage/condition: Machine stored under power in a heated warehouse Additional equipment • Bürener chip conveyor, 840 mm height, hinge-chain type • Handling unit with 2‑finger gripper for finished part and remnant • Conveyor belt for finished parts with flap for remnants • Bar feeder: LNS, 1500 mm Technical Specification Kodpfxoyuwyvs Ahvelp Counter Spindle Yes

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, Equipment: documentation/manual, rotational speed infinitely variable, Index G42 lathe with 3m rod loader fully functional. Max. rod diameter, m. 42mm. Machine has an automatic rod tacker. With chip conveyor and coolant container. Revolver VDI30 without driven tool stations. With internal cooling. Kledpfox Nbk Nex Ahvsp Siemens control C200. Machine is sold because machine operator retired. A lot of accessories included, on rod guide bushings, collets etc. see pictures. Machine manuals and documentation available. Machine is picked up in our hall.

Condition: ready for operation (used), Year of construction: 2000, travel distance X-axis: 81 mm, travel distance Z-axis: 80 mm, number of axes: 2, Horizontal turning machine manufactured in 2000. This Index ABC features a maximum spindle speed of 5000 1/min and a bar capacity of 60 mm. It includes an 8-station revolver with driven tools capable of 6000 1/min. If you are looking to get high-quality turning capabilities, consider the Index ABC machine we have for sale. Contact us for further details. • Main Spindle Torque (100/40% ED): 95/140 Nm • Bar Capacity: Max. 60 mm • Revolver 1: 8 stations (7 for VDI 25 tools, 1 for synchronous spindle) • Revolver 1 Driven Tools: Max. speed 6000 1/min, power 3.3 kW • Revolver 2: 6 stations, X-travel 81 mm, Z-travel 80 mm • Synchronous Spindle: Max. speed 4500 1/min, torque 10 Nm • Coolant Tank Capacity: 220 liters • Power Supply: 400 V, 50 Hz • Cabinet Dimensions: 1300 mm width x 2000 mm height • Display: 24 cm color flat screen interface • Control Version: C200-4 Additional equipment • Loading Magazine: INDEX MBL 65/3700 • MBL Bar Length Capacity: 3000 mm (D 5–10) / 3600 mm (D 10–65) • Chip Conveyor: Knoll chip conveyor with 840 mm discharge height Technical Specification Counter Spindle Yes Driven Tools Yes Kodsyuu N Iepfx Ahvjlp

Condition: used, Year of construction: 2013, turning diameter 110 mm Kjdpfsyuzfvsx Ahvolp turning length 450 mm control Siemens weight of the machine ca. 9000 kg

Condition: excellent (used), Year of construction: 2004, - Synchron - C axis Klsdpfx Aoyvkbdehvjp - Transmit function - Polygon device/thread milling cutter - 1 rear driven unit - Iemca Master 880 bar feeder, year 2004

Condition: excellent (used), Year of construction: 2009, operating hours: 28,742 h, functionality: fully functional, bar passage: 65 mm, FANUC Series 31i-Model A 3 turrets Parts conveyor Ksdpjydmbuofx Ahvolp Magazine Further details on request

Condition: used, Year of construction: 2011, turning diameter 160 mm turning length 550 mm Klodpeyuzfpsfx Ahvsp control Siemens weight of the machine ca. 9000 kg

Condition: used, spindle passage 25 mm turning speeds 5750 U/min Rest 4 straight turning atchm. - working travel . mm turret head 8 bar loader LNZ Hydrobar parts catcher Kljdjyutvaopfx Ahvsp The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: ready for operation (used), Year of construction: 2008, spindle speed (max.): 3,000 rpm, travel distance X-axis: 640 mm, travel distance Y-axis: 210 mm, travel distance Z-axis: 2,000 mm, spindle motor power: 67,000 W, total height: 2,591 mm, total width: 2,199 mm, overall weight: 21,000 kg, product length (max.): 6,300 mm, tool weight: 5,000 g, swivel angle B-axis (max.): 360 °, swivel angle C-axis (max.): 360 °, number of axes: 4, This 4-axis Index G 400 horizontal turning machine was manufactured in 2008. It features a maximum turning diameter of 630 mm, a length capacity of 2000 mm, and supports a workpiece weight up to 300 kg. Equipped with a high-speed milling spindle at 6000 rpm and a main spindle speed of 3000 rpm, it offers robust machining capabilities. Consider the opportunity to buy this Index G 400 horizontal turning machine. Contact us for more information. Kodpfx Ahjx D D Ecevelp Main spindle 0102 direct driveMaximum material throughput: 102 mmMaximum speed: 3000 rpmFront bearing diameter: 170 mmVariable hollow shaft motorPower at main spindle D102:Power at 100/40% duty cycle: 53 kW/68 kWTorque: 675 Nm/900 NmWork spindle alignment and switching device D1022.5° increments via indexing discHydraulicly actuated hollow clamping cylinder D102 with analog clamping stroke monitoringMaterial clearance: 102 mmStroke: 48 mmMaximum clamping force (tension/compression): 10,900 dNMulti-clamping pressure deviceClamping pressure adjustable from 8 to 80 bar via a multi-stage parts catalog for the main spindle clamping cylinder. Chuck release movement required for transitioning to a lower clamping l carrier 1 (standard equipment)Cross slide X, Z, turning length 2000 h internal coolant supply and shut-off valve, ball screws D=40 mmin the X-axis, D=50 mm in the Z-axis. Axis drives protected by overload clutches, counterweight in the s X ZWorking travel mm: 320 2000Rapid traverse speed m/min: 20 40Feed force N: 14000 14000X-axis measuring system: Glass scale (absolute)Z-axis: ROQ encoder (absolute)X-Y-Z-B housing (WT1)Turret with AC motor, positioned by spur gears, hydraulically lockedY-axis quill, hydrostatically mounted, lockable via spur gearsBall screw, D=40 mmOverload clutchTravel: 220 mmRapid traverse speed: 12 m/minFeed force: 24,000 NROQ encoder (abs)B-axis drive with AC motorSwivel angle: 360°Tool drive unitwith two clutches:Maximum speed: 6,000 rpmPower (25%) at n= 6,000: 17 kWMaximum torque (25%): 37 NmDisc turret with 12 stations on cross slide 1Tool holder system DIN 69880-40x63Increased repeatability during tool changes due to additional W-slotsMultifunction unit on cross slide 1Maximum speed: 6,000/1,500 rpmGearbox: i=4Torque: 36/144 NmTools: SK50Front bearing diameter: 75 mmInternal coolant feedthrough, disc spring clampingTool carrier 2, right - X, ZTurning length 2000 mm, preferably oncounter spindle machine with internal coolant supply and shut-off valve, turret control via AG motor, ball screws D= 50 mm for Z-axis, D= 40 mm for X-axis. Axis drives protected by overload clutches, counterweight system in ret head oriented to the right towards the counter s X ZTravel mm 210 2000Rapid traverse speed m/min 20 40Feed force N 8600 14000X-axis measuring system: glass scale (abs)Z-axis: ROD encoder (abs)Disc turret with 10 on cross slide 2Tool holder system DIN 69880-40x63Increased repeatability during tool changes thanks to additional W-slotsPositioned by face gearing, hydraulically lockedCounter spindle D102, size 11-DIN 55026/55021 and ISO 702/1Turning length 2000 mmZ-axis slide driven by AC motor and 50 mm diameter ball screwAxis drive protected by overload clutchIn the working position, the slide is held against the stop by the AC motor.

Condition: ready for operation (used), Year of construction: 1998, operating hours: 39,445 h, controller manufacturer: SIEMENS, controller model: SINUMERIK 840C, number of axes: 12, This 12s Index MS42C was manufactured in 1998. It features a maximum bar diameter of 42 mm and operates with a fully automatic system, making it suitable for high-volume precision turned parts. The machine is equipped with a Siemens SINUMERIK 840C control system and AC servo drives, ensuring efficient performance. Consider the opportunity to buy this Index MS42C automation equipment. Contact us for further details. • Maximum bar diameter: 42 mm • Number of spindles: 6 • Spindle pitch circle diameter: approx. 320 mm • Maximum spindle speed: approx. 5,000 rpm • Number of CNC axes: 12 linear axes (6 × X, 6 × Z) • Axis configuration: X/Z per spindle station • Control: Siemens SINUMERIK 840C (INDEX OEM integration) Kljdpfsyhf N Esx Ahvop • Drive system: AC servo drives with SERCOS interface • Automation level: Fully automatic • Operating mode: Continuous production (24/7 capable) • Cooling: Central coolant system • Lubrication: Central automatic lubrication • Electrical supply: 3-phase industrial power • Installed power: approx. 70–75 kW (configuration dependent) • Machine construction: Rigid cast iron base • Typical materials: Steel, stainless steel, aluminum, brass • Typical applications: High-volume precision turned parts

Condition: ready for operation (used), Year of construction: 2003, operating hours: 92,000 h, controller manufacturer: SIEMENS, controller model: 840D, number of axes: 5, This 5-axis Index G 200 RATIO LINE was manufactured in 2003. It features a Y-axis travel of 120 mm, a main spindle diameter of D65, and a counter spindle diameter of D60. The machine is equipped with a turret that has 12 stations and driven tools on turret 1 and 2. If you are looking to get high-quality turning and milling capabilities, consider the Index G 200 RATIO LINE turn-mill centre we have for sale. Contact us for further details. • C-axis on main and counter spindle • Thread cutting without compensating chuck • Electronic shaft • Additional V24 RS232 interface in control cabinet • Transmit-/Tracyl function • MDE interface (machine on, machine running, parts counter) • Marposs (Brankamp) collision monitoring CMS100 • 3D machine model for kinematic simulation in CAM programming system • Control cabinet cooling unit • Main spindle D65 • Counter spindle D60 • Coolant flushing of counter spindle (electrically controlled shut-off valve) • Foot switch • Turret (12 stations) bottom and top • Driven tools on turret 1 and 2 • Control function “synchronous tailstock” for turret 2 • Y-axis 120 mm • Automatic sliding door (hydraulic) • Coolant pump 80 l / 8 bar • High-pressure coolant connection slide 1 and 2 with solenoid valve • Coolant flushing gun • Preparation for extraction and filter system connection • Operating hours approx. 92,000 h Additional equipment • Portal unloading device with actuated gripper, NC-controlled • Gripper fingers D4–45 mm and D40–65 mm • Indexed conveyor belt • UNIMAG interface Kljdsylw Dcopfx Ahvop • Chip conveyor (hinged belt), discharge height 1250 mm • Vacuum rotary filter KNOLL (emulsion use) • High-pressure pump 80 bar • Workholding: • Collet chucks for draw tube, HAINBUCH (main and counter spindle) • Power chucks D210 with quick jaw change, Schunk (main and counter spindle) • Stop device • Optional: large number of powered tool holders and spare parts warehouse

Condition: ready for operation (used), Year of construction: 2002, operating hours: 24,971 h, spindle speed (max.): 6,000 rpm, controller manufacturer: SIEMENS, controller model: SINUMERIK 840C, number of axes: 12, This 12s Index MS42C multi-spindle turning machine was manufactured in 2002. It features a maximum bar diameter of 42 mm and a spindle speed of approximately 5,000 rpm, making it suitable for high-quality turning capabilities. Consider the opportunity to buy this Index MS42C multi-spindle turning machine. Contact us for further details. • Maximum bar diameter: 42 mm • Number of spindles: 6 Klsdoyhpguepfx Ahvsp • Spindle pitch circle diameter: approx. 320 mm • Number of CNC axes: 12 linear axes (6 × X, 6 × Z) • Axis configuration: X/Z per spindle station • Control system: Siemens SINUMERIK 840C (INDEX OEM) • Drive system: AC servo drives with SERCOS interface • Automation level: Fully automatic • Cooling system: Central coolant system • Lubrication system: Central automatic lubrication • Installed power: approx. 70–75 kW • Typical materials: Steel, stainless steel, aluminum, brass

Condition: ready for operation (used), Year of construction: 2000, spindle motor power: 22,000 W, total height: 2,050 mm, overall weight: 4,000 kg, controller manufacturer: INDEX, controller model: C200-4 / C200-8, This 5-axis Index G200 C turn-mill centre was manufactured in 2000. Consider the opportunity to buy this Index G200 C turn-mill centre. Contact us for more information. Additional equipment • Synchronous device for counter spindle machining • Tool carrier 3 for synchronous spindle (rear end machining) • Additional milling spindle • Thread milling and polygon turning device • Gripperless tool changer (6 tools, HKS-50 B, KM40) • Workpiece handling WHU100 • with c-axis • no driven tools Machine Benefits Technical Machine Benefits • Space requirement (without material guide): 3580 x 3108 mm • Control unit: resolution: 0. 001 mm (input/output/correction) • Comprehensive movement range with multiple axes configuration • High precision with 0. 001 mm resolution in numerical control • Versatile expansion stages and additional equipment for enhanced functionality Extra Information Klsdpfeyailzex Ahvop Movement Cross slide 1 (top) - XYZB axes: X-axis: Slide path 155 mm, feed force 5000 N, rapid traverse 20 m/min, resolution 0.0005 mm Y-axis: Slide travel 120 mm, feed force 10000 N, rapid traverse 7.5 m/min, resolution 0.0005 mm Z-axis: Slide path 590 mm, feed force 5000 N, rapid traverse 30 m/min, resolution 0.001 mm B-axis (rotating): 360° swivel range, angular steps 5° (with locking), resolution 0.001° (with clamping), switching time for 180°: 1 s Cross slide 2 (bottom) - XZ axes: X-axis: Slide travel 105 mm, feed force 5000 N, rapid traverse 20 m/min, resolution 0.0005 mm Z-axis: Slide path 307 mm, feed force 5000 N, rapid traverse 30 m/min, resolution 0.001 mm Turret Turret right: X-axis: Slide path 120 mm Z-axis: Slide travel 400 mm Tail Stock Center distance: 400 mm Pressure force (max): 5500 N Drive: Hydraulic or electric Media Power supply: 400 V, 50/60 Hz Connected load: 20-45 kVA Current consumption: 35-80 A Hydraulic system: Delivery rate: 18 l/min System pressure: 90 bar Filling capacity: 70 liters Cooling lubricant system: Pump capacity (switchable): 20 l/min at 18 bar / 50 l/min at 3 bar / 60 l/min at 5-7 bar Filling quantity: Approx. 230 liters Chip conveyor: Hinged belt or scraper Workpiece holder: Main spindle: DB5 internal mount / D140 external mount, optional short taper Counter spindle: D140 external mount (only tensile clamping permitted for collet and chuck clamping) 1st spindle data (main/counter spindle): Spindle clearance (collet clamping): Variants: 30 mm / 42 mm / 60 mm / 65 mm Spindle Ø in front bearing: 75 mm (with 30 mm clearance) / 85 mm (42 mm) / 100 mm (60+65 mm) Speed (max): 7500 rpm (30 mm) / 6300 rpm (42 mm) / 5000 rpm (60 mm) Spindle nose: ISO 702/1 (size 4 or 5) Chip diameter (workpiece Ø): 110-130 mm (30 mm) / 140-160 mm (42 mm) / 165 mm (60 mm) Torque (Md max 100%): 33-62 Nm (30 mm) / 35-95 Nm (42 mm) Power (P max 100%): 7-13 kW (30 mm) / 7.5-20 kW (42 mm) Dimensions Machine Depth 3580 mm

Condition: ready for operation (used), Year of construction: 2008, controller manufacturer: SIEMENS, number of axes: 3, This 3-axis Index MC 400 horizontal turning machine was manufactured in 2008. Ideal for precision turning operations, it offers robust construction and reliable performance. If you are looking to get high-quality turning capabilities consider the Index MC 400 machine we have for sale. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Max turning diameter: 350 mm • Max turning length: approximately 300 mm • Hole through spindle: 66 mm • 14-tool revolver • Driven tools Ksdpfx Ahoyar Ifsvelp Extra Information Machine still under power

Condition: used, Year of construction: 2019, controller manufacturer: Siemens, controller model: 840 Dsl, _____ Description: Year of manuf. : 2019 Control : Siemens 840 Dsl Mainspindle: Technology:Motorspindle Speed:6.000 rpm Power:20 kW Barcapacity:65 mm Workpiececlamping:Collet chuck, Hainbuch Spanntop Modular Gr. 65 Toolcarrier I (X/Z): Technology:Turret with 8 Stations Taper:VDI 25 Tooldrive:6.000 rpm, 4,2 kW, 10 Nm Complete processing:Synchronspindle with 3-Jaw chuck, ø95 mm Movement in X/Z:90/280 mm Rapid travers in X/Z:27/36 m/min Toolcarrier II (X/Z): Technology:Turret with 8 Stations Taper:Dovetail Guide Tooldrive:6.000 rpm Movement in X/Z:81/80 mm Rapid travers in X/Z:27/36 m/min Backworking attachment: Technology:Backworking attachment with 5 stations Driven Tools:2 stations Tooldrive:6.000 rpm Kledpfx Ahsyq Um Eevjp Equipment/Accessory: Chipmanagement:Chip conveyor Coolingmanagement:Coolant pump with High-pressure, 20 bar Rawmaterialfeed:Barloader, Breuning Irco ILS-MUK 7012 III Finished part removal:Parts catcher with conveyor belt Oilmistseparation:Interface prepared Toolholder:Misc. static toolholder (VDI25 & Dovetail)

Condition: used, spindle passage 60 mm cross-slide 4 turret head 6 Pos. The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. Kodpfxsyt R E Ae Ahvelp We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 2001, swing diameter max. 450 mm chucking diameter 400 mm control Siemens 840D (Index) Max. rpm 4.200 min/-1 power capacity - main spindel ( 35,5 / 56 ) kW Ksdpfxsyq Sk Ie Ahvslp max. Torque ( 340 / 550 ) Nm C-Axis 0,001 ° number of toolpositions 2x 12 pos driven statition 2x 12 pos worktool system VDI 30 max. spindle speed driven tools 6.000 U/min. power capacity - driven tools 9,5 kW max. Torque 40%: 19 Nm Y - Axis +/- 90 mm B-Axis +270° / -90 ° x-axis 730 mm z-axis 340 mm y-axis +/- 90 mm b-axis +270° / -90 ° rapid traverse X: 40 / Z: 30 m/min numbers of pallets 24 pos. size of pallet 410 x 300 mm max. workpiecediameter 300 mm max. workpiece weight incl. Pallet: 25 kg Chain width 75 mm band speed 7,5 m/min total power requirement 56 kW weight of the machine ca. 9,0 t dimensions of the machine ca. 8,5 x 6,0 x 2,7 m CNC - Vertical Lathe INDEX - V 300 Y/B - incl. 24 pos. palett changing system Schnaithmann - incl. ball screw as spare part - incl. 39x driven tools - incl. 39x tool holders

Condition: used, Year of construction: 2023, Technical details: turning diameter: 770 mm turning diameter over slide: 650 mm turning length: 750 mm max. diameter of work permitted:: 82 mm y-axis: +/- 60 mm turret (x-stations): 12 VDI 40 turning speeds: 4.000 1/min tail stock: ja Kodpfx Asxhd Ufehvelp total power requirement: 47 kVA weight of the machine ca.: 7,8 t dimensions of the machine ca.: 3,3 x 1,9 x 2,3 m Accerories main spindle power 16 / 24 kW CNC lathe, NC-tailstock, C-axis with brake, live tooling (10,5 kW, 5.400 rpm), 3-jaw chuck SCHUNK ROTA THW 260-81, chip conveyor, prepared for oilmist suction, parts catcher and belt (right side), coolant device 300l, 8/20bar, accessories (8pcs. live-toolholder...) approx. 3.000 working hours *

Condition: excellent (used), Year of construction: 2002, Control: Siemens SINUMERIK 840D, C200-4D Spindle speed: 6000 rpm Travel X/Y/Z: 280/280/145 mm Number of turrets: 1 with 6 positions Number of tool stations: 2x4 Kodpfxeyp Icwe Ahvjlp Chip conveyor Pallet conveyor belt Pallets

Condition: good (used), Year of construction: 2006, Year of manufacture: 1998 to 2006 Available from current location Ksdpfx Ahjypltgevolp

Condition: used, Year of construction: 1996, Type: Multispindle lathe Make: Index Model: G200 Year of manufacture: 1996 Condition: Used Quantity: 1 Ksdpfx Ahjyn Hmxsvolp

Condition: used, Year of construction: 2008, Out of valve production Kjdsynkgvjpfx Ahvolp *

Year of construction: 2005, condition: not inspected (used), functionality: unexamined, travel distance X-axis: 200 mm, travel distance Z-axis: 500 mm, controller model: SIEMENS SINUMERIK, overall weight: 8,000 kg, turning length: 800 mm, machine/vehicle number: 500571, Equipment: chip conveyor, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates the buyer to collect the item within either May 11–13, 2026, or May 18–21, 2026, without exception. TECHNICAL DETAILS Travel X-axis: approx. 200 mm Travel Z-axis: approx. 500 mm Spindle bore: approx. 100 mm Turning length approx.: 800 mm MACHINE DETAILS Control: SIEMENS SINUMERIK Operating voltage: 400 V Rated current: 80 A Connected load: 47 kW Frequency: 50 Hz Dimensions & Weight Dimensions (L x W x H): 6,000 x 3,000 x 3,300 mm Ksdpfsynhd Sox Ahvelp Weight: 8,000 kg EQUIPMENT Double turret with 12-position tool turret each Tailstock Main spindle Chip conveyor Two manuals BÜCHEL brand extraction filter Note: Machine can be transported on a standard truck. External reference: Pieper - Lot 50