Automatic turret lathe

HESTIKA HR 32

Condition: used, CNC cycle controlled lathe HARRISON type Alpha 400 Plus Machine No. P30180/150 Year of construction 1998 center distance 1250 mm turning diameter over bed 400 mm center height 200 mm Swing diameter over cross slide 245 mm Swing diameter in the bend 585 mm bed width 313 mm face travel (X-axis) 250 mm Tailstock spindle diameter 73 mm Tailstock quill stroke 140 mm Tailstock quill mount MK 5 spindle bore 54 mm spindle head size Camlock D1 size 6 Spindle speed 20-2500 rpm. Pgjdpfx Ash Hvk Ashyok Spindle speed range (stage 1) 15-275 rpm. Spindle speed range (stage 2) 35-795 rpm. Spindle speed range (level 3) 110-2500 rpm. Feed rate X and Z 0.03 - 0.6 mm/rev. Rapid traverse speed X axis max. 2000 mm/min. Rapid traverse speed Z-axis max. 4000 mm/min. Threading function Metric / Inch / Diametral / Module Spindle drive power 7.5 KW Mains connection 400 Volt, 50 Hz, 23,5 kVA - cycle control Harrison Alpha / GE FANUC - language in French (France) - automatic gear range shifting in 3 steps (15-275, 35-795, 110-2500 rpm.) - electronic handwheels with different transmission ratios (1/10/100) - 3-jaw face spiral lathe chuck FORKARDT Ø 250 mm type CSN, 1 set of soft top jaws - quick-change tool holder MULTIFIX size B with 2 inserts - 1 piece of centering point running with the tool - 1 piece quick-action drill chuck RÖHM, 3-16 mm - hinged lathe chuck guard - hinged working area protection doors - chip tray with coolant device under the machine bed - Switch cabinet fixed to the machine - Interface RS 232 Space requirement L x W x H 2600 x 1450 x 1550 mm weight 1950 kg good condition

Condition: used, Year of construction: 1970, Weiler lathe with tailstock Pedpfx Aehtnu Tshyegk

Condition: new, Year of construction: 2025, * 250 lt Net Volume * Dosing pump included. * Highly wear resistant P.U.Lining (90 Shore) * High performance three phase current drive motor. * Changeable valf for the wastewater decharging * Main swicth and emergency stop switch. Pgodpjh I N Udsfx Ahyek * Timer and working hours timer * Special construction of control panel(EU Standarts) included

Condition: like new (used), Year of construction: 2022, operating hours: 3,800 h, functionality: fully functional, Year 2022 - 3800 hours MultiSwiss 8x26, 6 Y-axes Psdpexrfunefx Ahyjgk 8 motor spindles, 11 kW – 8000 rpm max Spindle capacity 26 mm, Z stroke 75 mm (max. workpiece 65 mm) 2 X-slide units in positions 1-8, stroke 80 mm 6 X-Y slide units in positions 2-3-4-5-6-7, X stroke 55 mm, Y +/-16.5 mm Counter spindle 11 kW – 8000 rpm max Z stroke 150 mm, X 170 mm HP ejector adaptation for counter spindle (requires 3010 or 3020) Fanuc 30iB CNC control Integrated PC with Windows 10 operating system 21.5" color touchscreen Independent C axis on each spindle in main and counter operations (requires 0060 or 0065 or 0070 or 0075)

Year of construction: 2022, condition: like new (used), The Polygim Mini 88 is an extremely compact and user-friendly machine, designed specifically for the efficient machining of simple parts. With its space-saving design and robust, durable construction, it offers a perfect solution for operations with limited floor space or for integration into existing production lines. Description Technical Data Unit Machine Poly Gim MINI-88 2-axis CNC lathe with Fanuc 0iTF Plus control Spindle Max. spindle speed 100 – 5,000 rpm Max. machining diameter (with chuck) — Pedpfx Aewpgiwshyjgk Max. machining diameter (with collet) 60 mm Max. machining length 120 mm Spindle motor 100% DC-2.2 kW / 50% DC-3 kW Turning diameter Turning diameter 60 mm Turning length 120 mm Bar capacity 26 mm Travel distances X-axis 150 mm Y-axis 170 mm Tooling Tool holder 16 x 16 mm Ø 20 mm Hydraulic chuck 4" Smallest programmable increment 0.001 mm Accessories Including RS232 and PCMCIA interface Line graphic display Box guideways on Z-axis Chip conveyor Hydraulic hollow clamping device for chuck and collet fixture Chuck Ø 100 mm Parts catcher 8-station turret and linear system Central lubrication Coolant pump

Condition: used, Deburring and fine grinding machine for sheet metal / flat material, new The compact machining centre for deburring, slag removal, rust removal, oxide layer removal, edge rounding, fine grinding through to polishing metal surfaces. Due to the fixed working height, this machine can also be optimally integrated into a production line and is suitable for machining large parts. Working width: 1150 - 1350 mm Maximum part weight: 500 kg Wide belts with abrasive belt unwinding: 2620 mm As standard with vacuum hold system, optional with magnetic hold system By using 2620 mm long abrasive belts, you get a uniformly smooth surface and reduce consumption costs, as these belts have a longer service life. Due to the modular design of the machines, it is possible to offer the optimal configuration for the customer's machining task. The machine structure can accommodate up to 5 internal machining units and 2 additional external machining units. The high rigidity of the machine structure and the feed table of this machine, combined with the advanced mechanics and electronics, make this series a universal machining centre for deburring and finishing. Please, contact us for getting more information and pictures on mail(at) or Pgsdpfxenah Tdj Ahysk *

Condition: used, Technical details: spindle passage: 60 mm turning length: 45 mm turning diameter: max. 56 mm drill depth: max. 70 mm Pgedpfx Ahsu Iwyieyek revolution per minute: 48 - 1500 (spindle) U/min threading: Drehzahl: 24 - 750 U/min tool turret - number of stations: 8 total power requirement: 5,5 kW weight of the machine ca.: 2,4 t space requirement of the machine approx.: L:2,1x1,0x1,8 m Cam-controlled automatic lathe according to template. Workpiece is clamped via clamping cartridge. Turret head: disk turret Hahn&Tessky Esslingen, tool path 80mm, adjustment 36mm, distance collet/turret head min./max.: 72/188mm 2 pieces turning support, working stroke 45mm 2 piece cutting off support, working path approx. 40mm Cooling water system Machine is not connected. Sale at a low selling price. *

Condition: good (used), Technical specifications: Pgedev E Nafepfx Ahyek -table surface: 400 x 1400 mm - longitudinal movement of the table - X axis: 1000 mm - lateral movement of the table - Z: 450 mm -vertical table movement - Y axis: 400 mm -spindle cone: ISO 50 -Spindle speed: 35.5 - 1800 rpm total machine power: 11 kW

Condition: used, Year of construction: 1997, Year: 1997 Table: 1780 x 415mm Pgsdpfx Ahjwtd Dyoysk Spindle Speed 30 – 2066 RPM FIDIA Control Power Draw Bar LOVO Light Coolant

Condition: good (used), Year of construction: 2000, functionality: fully functional, CNC lathe, HITACHI SEIKI, type HT 23-RIII, year 2000 SEICOS L MULTI DIALOG control system. Maximum turning diameter: 450 mm Maximum turning length: 630 mm Tool turret with 12 positions VDI 40 Chuck diameter: 250 mm Spindle bore: 78 mm Spindle speeds: 30-4000 rpm Rapid traverse: X and Z 30 m/min Chip conveyor. Pgedpfx Aov T Un Djhysk For further information, see data sheets. The machine is in good condition and can be demonstrated under power. Machine documentation is available.