Used Cnc Sheet Feeder for sale (17,354)

Condition: good (used), In this offer you acquire a used longbow feeder "Canon BDT VX 370". Item for sale: Kdodpfol Axtgex Ah Neg 1 x Canon BDT VX370 suitable for: Canon imagePRESS C10000VP Canon imagePRESS C8000VP Ricoh Pro C7100 Serie Ricoh Pro C9100 Serie Condition: This is a used unit and may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). The unit has been tested for function Packing and shipping: You are welcome to view the unit during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available upon request! Before shipment or collection, a function test will be recorded on video for you. For more information, you can of course also contact us personally.

Condition: used, CNC Press Brake BEYELER - BYSTRONIC Type PR 8 (2500 kN x 3100 mm) Serial No. Year of manufacture: 2001 Press capacity: 250 tons Working length: 3100 mm Stroke: 365 mm Frame gap: 410 mm Clearance between side frames: 2750 mm Table width: 100 mm, 200 mm with table extension Table height above floor: 840 mm Backgauge X-axis travel: 620 mm Backgauge R-axis travel: 240 mm Approach speed: 200 mm/s Working speed: 1-10 mm/s Y-axis rapid traverse: 200 mm/s Y-axis working speed: 1-10 mm/s Y-axis return speed: 135 mm/s Oil capacity: approx. 400 liters Motor power: 18.5 kW Connected load: approx. 25 kW Power supply: 400 Volt, 50 Hz, 50 Amp. - 8-axis CNC Control Cybelec DNC 1200 PS/A, X1 + X2 / R1 + R2 / Z1 + Z2 - 2 freely programmable stop fingers, movable laterally (Z1+Z2) - Backgauge (X-axis 620 mm) with 3 stop points up to max. 1080 mm - Press beam with servo valves and measuring system Y1 and Y2 - FIESSLER AKAS safety light barrier - Operation via electrical foot switch and/or two-hand control panel - Hydraulic upper tool clamping (TRUMPF system) with 20 mm clamping slot Kjdoya Iaqopfx Ah Nedg - Tool holder for the lower tool, height 160 mm x width 60 mm, with 14 x 23 mm locating slot - TRUMPF tool system, without tooling Dimensions L x W x H: 0 x 2500 x 3400 mm Machine height: 3350 mm (max. height 3400 mm) Weight: 17,000 kg In good condition

Condition: used, CNC press brake FASTI type 904-125/30 serial no. 95-904-5775 year of construction 1995 Pressure capacity 125 ton. Working length 3050 mm Stroke approx. 335 mm Stand projection 300 mm Clearance between the side uprights 2550 mm Tool installation height max. 465 mm (opening width between the tool holders) Table width 90 mm (the clamping system is mounted on the table) Table height above floor 875 mm (910 mm with clamping system) Backgauge X-axis 500 mm Backgauge R-axis 115 mm Backgauge Z-axis approx. 1950 mm Lowering speed Y rapid traverse 90 mm/s Lowering speed Y-operation 8.9 mm/s Return stroke speed Y-retraction 75 mm/s Oil filling approx. 160 liters Motor power 18.5 kW Mains connection 400 Volt, 50 Hz, 20 Amp. - 7-axis CNC control DELEM type DA 58 with LCD screen - 1 axis for back gauge - stop depth (X-axis) - 2 axes for back gauge - fence height (finger R1 + finger R2) - 2 axes for back gauge - stop finger, laterally movable (finger Z1 + finger Z2) - 2 axes for press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and 2-hand control panel or 2-hand control panel only - Hydraulic tool clamping for the TRUMPF upper tool system, with 20 mm clamping groove - Hydraulic tool clamping for the lower tool with 13 mm table groove, depth 21 mm (tool pin 13 x 20 mm) - FIESSLER safety light barrier, type AKAS - 2 material support arms at the front, manually movable to the side and height-adjustable - Electrical diagram, hydraulic diagram, user manual for control available - Control cabinet on the machine - without tools Space requirement L x W x H 5000 x 2500 x 3050 mm Transport dimensions L x W x H 5200 x 1900 x 2950 mm Weight 8.5 tons. Kedpfx Ahshmmfkj Nodg Good condition

Condition: excellent (used), Year of construction: 2015, Manufacturer: Honger Type: GL-300 Year of manufacture: 2015 Sheet thickness: 0.3 – 3.0 mm Kedpfsyapvmox Ah Nsdg Sheet width: 60 – 300 mm Coil inner diameter: 508 mm Coil outer diameter: max. 1200 mm Max. coil weight: 1 ton Voltage: 220 V Power: 1.5 kW

Condition: good (used), Year of construction: 1996, Victor Vturn-20 CNC turning centre, 10 Kdodpfx Ahoyahz Ij Neg station tool holder, Fanuc Series 0-T CNC, swarf conveyor, fitted air bench, with Hydrafeed Multifeed MLI bar feeder, serial no. 2766 (1996)

Condition: used, Automatic bar feeder Kedpex Trztefx Ah Njdg

Condition: as good as new (ex-display), The KHT H 3010 CNC + sheet holding device is a state-of-the-art guillotine shear from KNUTH, designed for precise and powerful cutting within the category of Guillotine Shears and the product group of Hydraulic Guillotine Shears. Built with a highly rigid frame and guided cutter bar, it minimizes twisting in the workpiece, ensuring optimal cutting accuracy while reducing rework. The user-friendly Cybelec Touch 8 control system operates via a touchscreen, allowing you to input the length, thickness, and strength of the plate material to automatically adjust kerf, cutting angle, and length for optimal results. This robust machine accommodates materials up to 10 mm thick, making it suitable for stainless steel sheets, while features like hydraulically regulated hold-downs guarantee steady fixation of materials during the cutting process. Safety is prioritized with advanced features like a light barrier and foot pedal emergency switch, adhering to the latest CE regulations. To expand the functionality of this Hydraulic Guillotine Shear, the innovative plate hold-up feature supports the plate during positioning for high precision. For further information, you can request a quote or order online. Kjdpfeq I Nb Tsx Ah Nedg

Condition: ready for operation (used), functionality: fully functional, Equipment: documentation/manual, rotational speed infinitely variable, Index G42 lathe with 3m bar feeder, fully functional. Max. bar diameter: 42mm. The machine is equipped with an automatic bar catcher. Comes with chip conveyor and coolant tank. VDI30 turret without driven tool stations. With internal cooling. Machine is being sold because the operator is retiring. A large amount of accessories included, such as bar guide bushes, collets, etc. – see pictures. Machine manuals and documentation available. Kedpfxjx Nbk Ns Ah Nsdg

Condition: excellent (used), DATEC EMJ-2505 Coil Feeder, Sheet Winder Manufacturer: DATEC CO., LTD. Type: EMJ-2505 Coil Width: 250 mm Coil Inner Diameter: 300–508 mm ⌀ Coil Outer Diameter: 1000 mm ⌀ Coil Weight: 500 kg Sheet Thickness: 0.3–2.6 mm Compensating Capacity: 480 mm² Speed: 12 m/min Motor Power: 0.4 kW Kdjdpfxewh Ttae Ah Nog Input Voltage: 220 V / 50 Hz

Condition: used, Schneider SF 60 Envelope Feeder: Single-sheet envelope feeder, year of manufacture: unknown, in good condition, immediately available. Please request a quotation. If you are interested, we are also happy to inform you about other machines in our inventory. You are welcome to arrange an appointment to inspect the machine at our premises. Kodpfx Aox Af T Ejh Nsdg

Condition: ready for operation (used), Year of construction: 2004, operating hours: 40,000 h, functionality: fully functional, sheet thickness steel (max.): 2 mm, sheet thickness aluminum (max.): 3 mm, working width: 2,780 mm, working height: 1,090 mm, TECHNICAL DETAILS Max. sheet length: 2,780 mm Max. sheet width: 1,500 mm Max. bending length: 2,550 mm Sheet thickness (stainless steel): 2.5 mm Max. flange height: 185 mm Sheet thickness (aluminium): 3.0 mm Max. bending angle: ± 135° Kdedpfx Aoxxp Eksh Nog Working height: 1,090 mm MACHINE DETAILS Dimensions & Weight Dimensions: 12,500 x 7,400 x 2,600 mm Approximate machine weight: 19,000 kg Total power requirement: 43 kW Operating hours: 40,000 h EQUIPMENT Automatic/manual loading via PCD Automatic loading system with lift table Automatic bending center P4-2516 Automatic tool setup ALA, symmetrical CLA Semi-automatic unloading of finished parts via SAP

Condition: ready for operation (used), Year of construction: 2004, operating hours: 40,000 h, functionality: fully functional, sheet thickness steel (max.): 2 mm, sheet thickness aluminum (max.): 3 mm, working width: 2,780 mm, working height: 1,090 mm, TECHNICAL DETAILS Max. sheet length: 2,780 mm Max. sheet width: 1,500 mm Max. bending length: 2,550 mm Sheet thickness (stainless steel): 2.5 mm Max. flange height: 185 mm Sheet thickness (aluminium): 3.0 mm Max. bending angle: ± 135° Working height: 1,090 mm MACHINE DETAILS Dimensions & Weight Dimensions: 12,500 x 7,400 x 2,600 mm Approximate machine weight: 19,000 kg Total power requirement: 43 kW Operating hours: 40,000 h EQUIPMENT Automatic/manual loading via PCD Automatic loading system with lift table Automatic bending center P4-2516 Automatic tool setup ALA, symmetrical CLA Semi-automatic unloading of finished parts via SAP Ksdpfx Ahexhfbts Nedg

Condition: excellent (used), Sheet feeder BV Material passage 120/100 Feed speed 2-13 m/min Three-phase motor Feed rollers 90 mm The nfeed rollers have been renewed Kdsdorbk E Hopfx Ah Njg

Condition: good (used), Year of construction: 1998, Baujahr 1998 Spindelstunden 52’000h Stangendurchlass 40mm Fanuc Series 18i-T Späneförderer Toolsetter integriert 12Stationen 1Spindel, X und Z Achse Kurzstangenlader Kdjdpfotth Hgex Ah Njg Spannzangenfutter F48

Year of construction: 2024, condition: new, Robotic gantry system for metal sheet and profile cutting 3D robotic gantry system for plasma and oxy-fuel cutting has double-side drive, precise positioning system by racks and pinions on the 3 linear axes with exceptional speed and dynamics. Zero-backlash on the 3 rotational axes allow 4-side machine processing of profiles and round tubes. Precise gearboxes with minimum backlash, dynamical engagement of the motors to the racks, and rigid guide system allows smooth movement, excellent cut quality of corners and small holes. The gantry system has a cantilevered part crossbeam, which allows profile cutting in a cabin especially designed for this purpose. Transversal motion range (Y axis) -- on request Longitudinal motion range (X axis) -- on request Vertical motion range (Z axis) -- 1500 mm Beams and profiles types: T, L, H, U, rectangular tube, round tube Maximum dimensions of beams: Width up to 1200mm Rectangular tubes: Cross-section up to 600x600mm KEY FEATURES Kdedsh I Nw Dspfx Ah Nsg ▪ Stable metal construction with precise linear guides and servo-drives with racks and pinions on all axes; ▪ High dynamics, on all X, Y and Z axes: up to 30 m / min speed and acceleration up to 3 m / s²; ▪ 3D control on seven axes allows for a higher level of CNC programming; ▪ Maximum use of machine resources, thanks to the concept of combined processing of sheets and profiles - the ability to 100% load the machine when switching between sheets and profiles, without downtime for loading sheets and profiles and unloading cut parts ▲ PLASMA CUTTING EQUIPMENT HYPERTHERM -- on request ▲ INSTALLATION AND TRAINING INCLUDED Approximate installation and training period - 15 days

Year of construction: 2003, condition: ready for operation (used), Built in 2003 Size max 300 x 300 mm min 100 x 100 mm Speed max 2.100 Pack./h Weight 160 kg (approx.) Kjdpfxsdybiio Ah Njdg

Year of construction: 1988, condition: ready for operation (used), top sheet hopper feeder Kodpfxjd Ad Nle Ah Nsdg Built in 1988

Year of construction: 2008, condition: ready for operation (used), A complete sheet metal processing center for bending and cutting including automation is available. Documentation available. On-site inspection is possible. Kdjdpfxov Rp S Es Ah Nog

Condition: ready for operation (used), ZM CNC microfeeder 800 x 1 mm Kodex Imlvepfx Ah Nsdg

Condition: used, Year of construction: 1995, Klebebinder mit Vorsatzanleger / Perfect Binder Kolbus Ratiobinder KM 470 with endsheet feederBaujahr 1988/1995 Kolbus Ratiobinder KM470 23 Zagne Format / Size min 125 x 100 x 3mm / max 460 x 310 x 60mm Buchblockdicke min. 3mm - max. 60mmAussattung / Consist of: Zusammentragmschine / Gatherer ZU 803 32 Stations Links- und Rechtslauf / Left and right side Criss-Cross Auslage / Criss-Cross delivery Anleger Vor- & Nachsatz für Hardcoverproduktion / Feeder for endsheet hard cover production Handanleger / Hand fed stationRatiobinder KM 470 mit 25 Zangen / Ratiobinder KM 470 with 25 Clamps PUR Rückenleimwerk / PUR spine gluing unit Hotmelt spine gluing unit PUR-, Hotmelt- und Dispersionsklebebindung / PUR, Hotmelt and dispersion glue binding Seitenbeleimung Heißleim / Hotmelt side gluing unit Fälzelstation / Back Lining station Kodpfsn Aw Ukex Ah Nsdg Buchblock- und Ganzpresse FM 405 für fadengeheftete Buchblocks für HardcoverproduktionKolbus FM 405 Buchblock- und Ganzpresse FM 405 für fadengeheftete Buchblocks für Hardcoverproduktion Book block and PRessing Station FM 405 for sewing book blocks and hard cover productionsDreischneider / Three knife Trimmer Kolbus HD 150 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Year of construction: 2017, condition: excellent (used), 4 CNC lathes including automation and tooling. Kdedjyaa Nwepfx Ah Njg Year of manufacture: 2017, 2012, 2010, and 2008

Condition: good (used), functionality: fully functional, Product type: Milling machine Space requirements: 1800 x 1700 x 1950 mm Kdsdpfx Ahsya Iwco Nog CNC control: CNC 2102 MPN: FP 3 A Overall length: 1700 mm X-axis travel: 500 mm Serial number: 2206-0546 Manufacturer’s part number: FP 3 A Required power (kW): 22 kW Overall width: 1800 mm Machine weight (kg): 1950 kg Function: Milling Y-axis travel: 300 mm Z-axis travel: 400 mm Overall height: 1950 mm Voltage: 380 V Maximum spindle speed (rpm): 2001 - 2500 rpm Brand: DECKEL Brand: Deckel Maho Country/Region of manufacture: Germany Control type: CNC Model/Type: FP 3 A Spindle power: 22 kW Year of manufacture: 1981

Condition: excellent (used), For sale: CNC rotary table from the renowned brand Fadal Engineering (USA), model VH65. Professional 4th axis designed for machining centers, especially Fadal VMC, but integration with other CNC machines is also possible using the appropriate controller. Technical specifications: • Model: VH65 • Table diameter: 165 mm (6.5”) • Gear ratio: 90:1 • Pneumatic brake (M60 ON / M61 OFF) • Industrial multipin connector • Serial no.: 4630298 Condition: used, mechanically functional, normal signs of operation. Solid and heavy construction – ideal for precise 4-axis machining. Kdodpfx Aow R St Njh Neg

Condition: excellent (used), HOLEX SK40 collet chuck for ER collets – robust design, ideal for use on CNC machining centers. • Type SK40 – DIN 69871 • ER collet (diameter Ø16 mm) • Chuck lengths: 70 mm, 100 mm, 110 mm (depending on model) Kdsdjw S Itbjpfx Ah Neg • Max. speed 12,000–15,000 rpm • Torque up to 70 Nm • Balancing class G6.3 – stable operation at high speeds • Brand HOLEX – Hahn+Kolb Germany • Very good, warehouse condition • Available individually or as a larger set

Condition: excellent (used), For sale: CNC tool holder GARANT (Hoffmann Group) – model SK40-16-100. High-quality clamping system for milling machines and machining centres, ideal for precision metalworking. • SK40 taper – industrial standard • Clamping diameter Ø16 mm • Length 100 mm • Balancing G2.5 – up to 25,000 rpm • Max. tightening torque 50 Nm • Premium brand – GARANT (Hoffmann Group) • Very good condition, used, fully functional – equipped with cutters/drills. -- PRICE IS FOR 1 PIECE -- Kedpsw Sy Epofx Ah Nodg