Used turning automatic lathes for sale (259)

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, spindle speed (max.): 12,000 rpm, turning diameter: 32 mm, overall weight: 7,000 kg, rapid traverse Z-axis: 20 m/min, power: 10.7 kW (14.55 HP), Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, C-axis Upper tool turret with X/Y/Z/H axis and 10 tool holders Lower tool turret with X/Y/Z/H axis and 9 tool holders Rear device with 8-fold total drive for 3 tools Hinged belt conveyor Resy paper band filter Godpfx Asx Digljg Douk Traub tool monitoring FMB LSK 38 – bar feeder

Condition: used, Year of construction: 2018, Traub TNL 32 Sliding Head Machine with Traub System TX8i-S Control, (2) x 10 Station Turrets, Collet Chuck, Turbo 3 - 36 FMB Bar Feed, Swarf Conveyor and Filtration System, Driven Tooling. S/No. 6060446 (2018) Location: These lots are located in Leamington Spa, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described. Gusdox E Tf Ropfx Ag Dok

Condition: good (used), Year of construction: 2003, functionality: fully functional, Machine-Details : Stock-No. 1022-2405 Type of machine Turning Automatic Lathe - swiss lathe Make CITIZEN Type L32 VII Year of manufacture 2003/2005 Type of control CNC Storage location Monheim (Germany) Country of origin Japan Delivery time Immediately Freight basis Ex warehouse, loaded on truck Technical details : working diameter max. 32 mm spindle passage 36 mm turning length 320 mm Control MITSUBISHI MELDAS 635LC travel max. (X1) 108 mm travel max. (Y1) 275 mm travel max. (Z1) 325 mm travel max. (X3) 238 mm travel max. (Z3) 410 mm main spindle speeds: 200 - 8000 U/min c-axis 0,001° deg. Subspindle spindle speeds 200 - 7000 U/min c-axis 0,001° deg. rapid traverse 20 m/min main drive 3,7 / 5,5 kW Subspindle motor 1,5 / 2,2 kW dimensions of machine 2,77 x 1,24 x 1,79 m weight of the machine ca. 2850 kg Additional information : CNC Swiss-Type Lathe First put into operation December 2005 The machine was used for a single shift and is in good condition with no maintenance backlog. Equipment: FMB Turbo 5-42/3200C bar loader, built 2004 Gujdpfx Agox A A R Is Djk High-pressure pump Many collet chucks for main spindle Various collets Drive unit for synchronously driven guide bush Synchronously driven guide bush Drive unit for transversely driven spindle on linear support Pick-up spindle Collet chuck for pick-up spindle Blow-out device for pick-up spindle Five fixed tool holders on the rear Workpiece removal device Coolant tank Central lubrication system Door lock Ejection device for workpieces with through holes Machine documentation The machine will be sold without tools and extraction system.

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, Universal Machine Center 5 axis simultaneous DMG DMC 105V Linear Year 2007 Travel : X1050 Y 800 Z 560mm NC Rotary Table Ø1,000mm Heidenhain iTNC530 Control Spindle 18,000rpm Gsdjwvra Ijpfx Ag Douk ATC 30 HSK-63A NC B axis Control Milling Head – 120o / +30o Roto clear window Tool Measuring system – Blum Measuring probe Cooling by air blast through spindle by M code Spindle through coolant Chip conveyor ____Cheapest 1m 5axis_____

Condition: excellent (used), Year of construction: 2018, Control Fanuc 32I-B, bar capacity 32mm, maximum cutting diameter 32mm, maximum cutting length 310mm, maximum drilling diameter 13mm, maximum tapping capacity M12, milling speed 5,000rpm, Gjdpfjw Rct Hox Ag Deuk spindle speed 7,000rpm, Sub spindle C axis 0.001 degree, FMB Turbo 3-36/3200 barfeed, number of controlled axis Z, ZB, X, XB, C1, C2, Y. swarf conveyor,

Condition: new, Year of construction: 2024, -10 linear axes - Ultra-powerful clamping - Rework spindle and its dedicated 9-position carriage (X4) enable you to carry out complex operations in masked time. - Spindle capacity: 8000 rpm - Oil-cooled electro-spindle Gsdpfeu Ik Tiex Ag Deuk - Latest-generation FANUC 31i numerical control - Compact cast-iron structure

Condition: good (used), Year of construction: 2018, Citizen / Swiss-type automatic lathe CINCOM L32-1M12, Year of manufacture: 2018, Machine has 12,550 operating hours, Gujdpfx Agox Apcqo Djk Mitsubishi Meldas M70 control, Conversion to 38 mm specification complete set (collet chuck mount without PIN), Synchronous guide bushing (38 mm specification) incl. key, Part container for long parts option, Spindle nut for long parts option, Long parts option – flange, Tube for long parts option Ø 33 mm, CNC WIZARD 2 Alkart Pro for Cincom, KNOLL hinged belt chip conveyor, Driven spindle for cross machining on the vertical holder, FMB turbo 3-36 I 3200 bar feeder, FMB Turbo 3-36 3200 D38 long/short retrofit kit, CO2 extinguishing system, Extraction / filter unit, High-pressure unit for cutting oil incl. transfer pump,

Condition: good (used), Year of construction: 2013, functionality: fully functional, Description: The machine is in good technical condition; testing is possible by prior arrangement. The offer also includes an FMB Minimag 20/3200 bar feeder, ensuring smooth and efficient material feeding into the machine. As part of the delivery, we can also provide internal equipment – guide bushes and collets for the main spindle, sub spindle, and bar feeder – suitable for material diameters of 3–12 mm. Max. bar capacity (mm): 20 (0.8) Z1 stroke max. (mm): 205 (8.1), 80 (3.1) Max. spindle speed (rpm): 10,000 / 10,000 Power at 100% / 40% (kW [hp]): 2.2 / 3.7 (3.0 / 5.0) Torque at 100% / 40% (Nm [ft-lb]): 14 / 23.5 (10.3 / 17.3) C-axis resolution (degrees): 0.001 Rapid traverse Z1 (m [in]/min): 40 (1,574) Gsdpfx Agjx An T Ue Djuk Upper turret: Tool mounts (number): 8 Live tools (number): 8 Power at 100% / 40% (kW [hp]): 1 / 2 (1.3 / 2.7) Tool mounting diameter (mm [in]): 45 (1.8) Turning tool cross-section (mm [in]): 16 x 16 / 12 x 12 (0.6 x 0.6 / 0.5 x 0.5) X1 travel (mm [in]): 120 (4.7) Rapid traverse X1 (m [in]/min): 20 (787) Chip-to-chip time:

Condition: good (used), Star SR-20 Type 530G CNC Sliding Head Lathe with Fanuc Series 16-T Control & FMB 'Turbo 3-26/4200' Automatic Bar Feeder 7-Axis. Ø20mm Lathe Spindle Turning Capacity. Spindle Speeds Up To 8,000rpm. (3) Driven Heads. S/No. 010944. FMB 'Turbo 3-26/4200' Automatic Bar Feeder. Bar Capacity Ø3mm-26mm x 4,200mm Long. Gedpjx Ah R Hefx Ag Dsuk With: Coolant Tank. Parts Catcher. Cromar Chip & Swarf Conveyor. Mobile Tipping Swarf Bin. Assorted Collets. Power Supply 415 Volt 3-Phase. Weight of Lathe Approx 1,800kg.

Condition: excellent (used), TSUGAMI-MORI BS32CE(S)-V is a CNC automatic lathe (CNC Swiss type) engineered for precision, high accuracy and reliable production. Working capacities: 7 axes, 2 spindles; max turning Ø 8–32 mm, max length 250 mm; drilling up to 12 mm, threading up to 10 M. Key specs: main spindle 200–7000 t/min, back spindle 200–6000 t/min; driven-tool speeds 200–5000 t/min; spindle motor 5.5 kW, back spindle 2.2 kW; feeds 1–6000 mm/min, rapid 20 m/min; 4 stations, 20 tools, 5 driven tools; weight ~2800 kg, size 2150×1500×1800 mm, air 5 bar. Accessories: LNS Express 332 bar loader (up to 3000 mm, Ø 3–32 mm), parts catcher, lamp, oil‑mist extractor, collet set, RS232 interface, status light. Delivers tight tolerances; suitable for automotive, watchmaking, machine tools, aerospace and medical. Gedpfxjxx U Udo Ag Deuk

Condition: good (used), Year of construction: 2007, functionality: fully functional, turning length: 320 mm, spindle speed (min.): 8,000 rpm, bar passage: 32 mm, Machining Data Maximum bar capacity: 32 mm Maximum turning length: 320 mm Maximum drill diameter (front): 12 mm Maximum tapping size (front): M12 Main spindle speed: up to 8,000 rpm Sub spindle speed: up to 8,000 rpm Gjdoxb R R Hopfx Ag Dsuk Number of tools: 25 to 27 Dimensions & Weight Dimensions (W x D x H): 2,860 mm x 1,465 mm x 1,900 mm Weight: 4,300 kg 10-position turret Rotating tools for complex machining operations FMB Turbo 3-36

Condition: used, Year of construction: 2007, The Citizen Cincom M32 is a CNC lathe with a movable headstock designed for high-precision machining. In 2007, the M32 model was produced, which has the following main features: Maximum turning diameter: 32 mm (optional 38 mm) Maximum turning length: 320 mm per clamping operation Maximum drill diameters (front): 12 mm Maximum tapping size (front): M12 (with cutting tap) Gedpevz Atdjfx Ag Dsuk Main spindle speed: up to 8,000 rpm Rear spindle speed: up to 8,000 rpm Number of tools: maximum 25 to 27 Dimensions (W x D x H): 2,860 x 1,465 x 1,900 mm Weight: 4,300 kg This model is equipped with a 10-station turret disk and offers a variety of tool configurations, including rotating tools for complex machining tasks. The machine is designed to ensure high precision and efficiency in manufacturing.

Condition: excellent (used), JBS guide bush pressure system suitable for Star Ecas 32 Gsdpfx Agopl U Efo Douk - on request the suitable maintenance unit can be delivered with it

Condition: good (used), Year of construction: 2018, KSI TCM 38 CNC sliding headstock lathe, Year of manufacture 2018, Fanuc Oi-TF control system, Bar machining up to 38 mm, LNS XH 552 loading magazine, Counter spindle up to 6,000 rpm, spindle speed main spindle up to 8,000 rpm, 2 x C axis, tools attached, 16 tools, max. turning length 300 mm, Gjdpfx Agjuixvfj Douk

Condition: excellent (used), TORNOS DT 26/5 is a CNC automatic lathe for precision, high accuracy and reliability. 5+2 axes, 2 spindles, max workpiece length 195 mm, bar ø25.4 mm; 2 tool-holders, 22 stations, 4 turning/4 drilling tools. Spindle 0–10,000 rpm, 8.2 kW (back spindle 8.2 kW); driven tools 5,000 rpm, 1 kW. Rapid traverse 32 m/min; weight ≈2400 kg; L2912×W1300×H1720 mm. Accessories: bar loader Top Automazioni, high‑pressure coolant 20 bar, central lubrication, status light. Achieves tight tolerances; sectors: automotive, watchmaking, toolmaking, aerospace, medical. Guodpfx Agexx U Spj Dek

Condition: like new (used), Year of construction: 2022, operating hours: 13,116 h, Max. bar capacity mm: 20 Max. Z-axis travel (sliding headstock/fixed headstock) mm: 205 / 80 Max. spindle speed rpm: 10,000 Drive power 100%/40% duty cycle kW: 3.0 / 5.5 Torque 100%/40% duty cycle Nm: 5.73 / 10.5 / max. 17.2 C-axis resolution degrees: 0.001 Max. rapid traverse Z m/min: 20 Tool stations: 8 Driven tools: 8 Max. tool speed rpm: 12,000 / 8,000 Tool holder diameter mm: 45 Gusdpfowuddvox Ag Dsk Drive power 100%/40% duty cycle kW: 1.0 / 2.0 Turning tool cross-section mm: 16x16 / 20x20 Slide travel X mm: 120 / 165 Slide travel Y mm: ±25.4 Slide travel Z mm: 254 / 567.5 Rapid traverse X/Y/Z m/min: 20 / 20 / 40 B-axis swivel angle degrees: 105 Lower turret: Tool stations: 8 Driven tools: 8 Max. tool speed rpm: 12,000 Tool holder diameter mm: 45 Drive power 100%/40% duty cycle kW: 1.0 / 2.0 Turning tool cross-section mm: 16x16 / 20x20 Slide travel X mm: 120 Slide travel Y mm: ±25.4 Slide travel Z mm: 155 Rapid traverse X/Y/Z m/min: 20 / 20 / 40 Back working device: Tool stations: 4 Slide travel X/Y/Z mm: 120 / ±25.4 / 155 Tool holder diameter mm: 25 Sub spindle: Max. spindle bore mm: 20 Max. spindle speed rpm: 10,000 Drive power 100%/40% duty cycle kW: 3.0 / 5.5 Torque 100%/40% duty cycle Nm: 5.73 / 10.5 / max. 17.2 Slide travel X mm: 235.5 Slide travel Z mm: 258 C-axis resolution degrees: 0.001 Rapid traverse X/Z m/min: 20 / 40 Coolant system basic unit: Pump pressure bar: 3 / 8 Tank capacity l: 250 Flow rate at 3 / 8 bar l/min: 80 / 120 Filtration degree µm: 200 Machine dimensions Length x width x height mm: see installation plan* Weight kg: 5,000* Connected load kW: 40 (47 kVA)

Condition: used, TORNOS DECO 2000/20 is a CNC automatic lathe delivering high precision, excellent accuracy and reliable performance. It features 10 axes, an internal spindle bore Ø20 mm, two independent carriages (X1‑Y1, X2‑Y2) with 5 positions each, 4 driven tools and a back spindle (3) up to 10,000 rpm for compact, flexible machining. Key specs: spindle stepless up to 10,000 rpm, spindle motor 2.2 kW, C‑axis resolution 0.1°, voltage 50 Hz 3x380‑420 V, total power 11 kVA, machine weight ≈3000 kg, overall L2950×W1100×H2300 mm. Accessories: SBF bar feeder Type 535, parts catcher and tool pre‑setting device. Capable of achieving tight tolerances; suited to automotive, watchmaking, tooling, aerospace and medical sectors. Godpsxx U I Rofx Ag Dsuk

Condition: good (used), Year of construction: 2023, Description Machine: Cincom B16E-VI Type: 5-axis precision lathe with FANUC 0i-TD control system We are offering the machines together with an Iemca Elite 112/32 bar feeder (year of manufacture 2023). Technical Data Machining: Main spindle max. bar diameter: Ø 16 mm Max. machining length without re-clamping: 135 mm Main spindle max. drilling diameter: Ø 6 mm Main spindle max. thread diameter: M 6 Sub spindle max. bar diameter: Ø 16 mm Sub spindle max. drilling diameter: Ø 5 mm Sub spindle max. thread diameter: M 3 Gedpfx Aevzg Sksg Dsuk Spindles, Tools and Axes: Main spindle speed: 200 ~ 8,000 rpm Sub spindle speed: 200 ~ 6,000 rpm Driven tool speed: 200 ~ 4,500 rpm C-axis indexing main spindle: 1° Maximum number of tool stations: 16 pcs Rapid traverse X, Y: 21 m/min Rapid traverse Z1, Z2: 15 m/min Tool holder: 10 x 10 mm Drive Power: Main spindle: 3.7 / 2.2 kW Sub spindle: 1.0 kW Driven tools: 0.5 kW Coolant pump: 0.25 kW Central lubrication pump: 3 W Electrical Connection: 200 V, 50 Hz, 3-phase Main transformer: input voltage 400 V / output voltage 200 V Connected load: 5.2 kVA Pneumatic Connection: Compressed air connection: min. 5 bar Compressed air consumption: 44 NL/min Machine Data: Dimensions: 1,590 x 837 mm Machine height: 1,761 mm Spindle height (floor to spindle center): approx. 1,000 mm Machine weight: 1,150 kg Control – CNC contouring control Fanuc 01-TD Smallest input increment: 0.001 mm Smallest output increment: 0.001 mm (Z) / 0.0005 mm (X) Input options: Incremental and absolute Interface: RS232 Main and sub spindle synchronization Standard Accessories Working area lighting Signal light (red/yellow/green) Part ejection and discharge device Coolant tank and central lubrication Door interlock Part catcher and finished parts container 5 turning tool holders (10 x 10 mm) Coolant system with movable jet arms Power chucking system for main and sub spindles

Condition: used, CITIZEN CINCOM K 16 E V II P is a CNC automatic lathe designed for precision, high accuracy and reliability. Capacities: max turning Ø 16 mm, turning length 200 mm, spindle bore 20 mm, max threading 8 M, back‑machining 80 mm. Specs: 7 axes, spindle 200–10000 rpm, 2× HF 60000 rpm, spindle motor 3.7 kW, 4 driven tools 6000 rpm, 3×400 V 50 Hz, weight ≈2250 kg, L2020×W1070×H1680 mm. Accessories: LNS bar feeder, Donaldson oil‑mist extractor. Achieves tight tolerances; typical applications: automotive, watchmaking, machine tools, aerospace, medical. Gsdpfx Ajxx U Ikog Deuk

Condition: used, The Citizen M32 is a CNC lathe with a movable headstock that was designed for high-precision machining. The M32V model was current in 2008. Here are the most important technical data: Maximum bar diameter: 32 mm (optional 38 mm) Gusdpfx Agevz Twgs Dok Maximum machining length per clamping operation: 320 mm Maximum drilling diameter (front spindle): 12 mm Maximum threaded hole (front spindle): M12 (with cutting tap) Main spindle speed: up to 8,000 rpm Maximum clamping diameter (counter spindle): 32 mm (optional 38 mm) Maximum drilling diameter (counter spindle): 12 mm Maximum threaded hole (counter spindle): M12 (with cutting tap) Maximum workpiece length for the counter spindle: 145 mm Counter spindle speed: up to 8,000 rpm Number of tools: 25 to 27 Number of turning tools: 5 Number of driven tools: 5 to 7 Number of stations in the turret: 10 Tool sizes: Turning tools 16 mm square; Boring bar holders 25.4 mm diameter Dimensions (L × W × H): 2,860 × 1,465 × 1,900 mm Weight: 4,300 kg This machine is characterized by its high rigidity and precision, which makes it ideal for complex machining tasks. It has a powerful main and sub spindle and versatile tool configurations that enable efficient and flexible production.

Condition: used, CITIZEN CINCOM L 20 VIII is a CNC automatic lathe, engineered for precision, high accuracy and reliability. Capacities: 2 spindles, max turning diameter 20 mm, max turning length 200 mm; spindle speeds 200–8000 t/min, back spindle 200–6000 t/min. Specifications: tool-holder 3 positions with 12 tools (5 turning, 3 drilling, 4 transverse), spindle motor 3.7 kW, back spindle power 1.5 kW, voltage 3x380 V 50 Hz, weight ≈2150 kg, dimensions 2050×1085×1800 mm. Accessory: bar feeder IEMCA BOSS 332 (2006). Delivers tight tolerances; typical applications: automotive, watchmaking, machine tools, aerospace, medical. Godpfxsxx U E Ne Ag Djuk

Condition: good (used), Year of construction: 2004, functionality: fully functional, Dear Sir or Madam, We are pleased to offer you a Traub TNL 26 CNC Swiss-type automatic lathe from the year 2004. The machine is in well-maintained, fully functional condition. Important Note: This particular model is equipped with only one turret. The TNL 26 was also manufactured in versions with two turrets – this offer explicitly refers to the version with a single turret. Technical Data (excerpt): Manufacturer: Traub Model: TNL 26 Year of manufacture: 2004 Control: Traub TX8i-S Turret: 1 unit, lower position, 12 tool stations, driven tools (all-head drive) Bar capacity: 26 / 32 mm Max. main spindle speed: up to 8,000 rpm Drive power: approx. 6.7 kW (100% duty cycle) / 10.7 kW (40% duty cycle) Torque: 21 Nm (100% duty cycle) / 32 Nm (40% duty cycle) Axes: X1 / Y1 / Z1, C-axis integrated in main spindle Chip conveyor: hinge belt, discharge height approx. 950 mm Guodoxgg Rmepfx Ag Djk Machine weight: approx. 4,000 – 4,200 kg Dimensions (L × W × H): approx. 4.4 × 1.4 × 1.7 m Condition & Application The machine is immediately available and ideally suited for the precise production of small and medium batches in the automotive, medical and precision engineering industries. Price & Terms Price: on request / negotiable Delivery: ex site, ex works Inspection: possible at any time by prior appointment. Should you require further information or wish to arrange an inspection, I am at your disposal at any time. Best regards, Arnd Sauter GmbH Björn Sauter

Condition: used, STAR SB-20R type N is a CNC automatic lathe (CNC Swiss type) engineered for high-precision work with superior accuracy and reliability. Capacities: max turning Ø 20 mm, max drilling Ø 10 mm, max threading Ø 8 M; total 5 axes, C-axis resolution 0.001°. Specs: spindle stepless 500–10000 t/min, rapid traverse 35 m/min, spindle motor 2.2/3.7 kW, total power 3.7 kVA, 50 Hz 3x 400 V, weight ≈1800 kg, dimensions L2070 × W1770 × H1760 mm. Accessories: C axis, workpiece conveyor, chip conveyor, coolant system, RS232 and USB interfaces. Achieves tight tolerances; ideal for automotive, watchmaking, machine tools, aerospace and medical sectors. Guodsxx U Eispfx Ag Dsk

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, The machine is offered with an Iemca Elite 112/32 bar feeder! TECHNICAL DETAILS Machining Main spindle max. bar diameter: 16 mm Max. machining length without regripping: 135 mm Main spindle max. drilling diameter: 6 mm Main spindle max. tapping diameter: M 6 Sub spindle max. bar diameter: 16 mm Sub spindle max. drilling diameter: 5 mm Sub spindle max. tapping diameter: M 3 Spindles Main spindle speed: 200–8,000 rpm Sub spindle speed: 200–6,000 rpm C-axis indexing on main spindle: 1° Rapid traverses Rapid traverse X, Y: 21 m/min Rapid traverse Z1, Z2: 15 m/min Tools Driven tool speed: 200–4,500 rpm Gjdpfxjxgd Rks Ag Deuk Max. number of tool stations: 16 Tool holder: 10 × 10 mm MACHINE DETAILS Drive power Main spindle: 3.7 / 2.2 kW Sub spindle: 1.0 kW Driven tools: 0.5 kW Coolant pump: 0.25 kW Central lubrication pump: 3 W Electrical connection Operating voltage: 200 V Frequency: 50 Hz Phases: 3 Main transformer input voltage: 400 V Main transformer output voltage: 200 V Connected load: 5.2 kVA Pneumatic connection Compressed air connection: Min. 5 bar Compressed air consumption: 44 NL/min Machine data Dimensions: 1,590 × 837 x 1,761 mm Spindle height (floor to spindle center): approx. 1,000 mm Machine weight: 1,150 kg Control Control type: CNC path control Fanuc 0i-TD Minimum input increment: 0.001 mm Minimum output increment: 0.001 mm (Z) / 0.0005 mm (X) Input mode: incremental and absolute Interface: RS232 Spindle synchronization: main and sub spindle EQUIPMENT Work area lighting Part ejector and removal unit Coolant tank and central lubrication Door interlock Parts catcher and workpiece container 5 turning tool holders 10 × 10 mm Coolant unit with swiveling spray arms Power chucking system for main and sub spindles

Condition: used, TSUGAMI BW 20 E is a CNC automatic lathe (Swiss type) engineered for precision, high accuracy and reliability. Capacities: max Ø 20 mm; 9 axes; 2 spindles; 20 tools. Specs: 200–10,000 rpm; spindle power 1.1/3.7 kW; rapid traverse 24 m/min; supply 3x400 V 50 Hz; total power 12 kVA; weight ≈2500 kg; size 1800×1300×1800 mm. Accessories: bar loader, parts catcher, lamp, coolant system, oil mist extractor ELBARON. Ideal for tight tolerances in automotive, watchmaking, machine tools, aerospace and medical. Gujdpfxjxx Uuws Ag Dok