Used Lynette for sale (135)

Condition: used, swing diameter / mm total power requirement / kW weight of the machine ca. / t Center height: approx. 280mm Kdsdpfoia Rrkjx Ah Nog dimension Length: 1300mm Width: 300mm Height: 560mm Weight: 265kg

Year of construction: 1987, condition: used, centre height 390 mm passage of steadyrest 220 mm chucking diameter 400 mm total power requirement / kW Kdedpfx Aehgw Uxsh Nog

Condition: used, Hydraulic self-centering steady rest, luenette, lynette SMW AUTOBLOK Hydraulic steady rest with hydrostatic bearings Suitable for GILDEMEISTER / MAX MÜLLER lathe MD 5 Type: SLK 8-70 N Clamping range: 8 to 70 mm Operating pressure: approx. 60 bar steady rest base: 245 x 240 mm Type of construction: stationary - 3 pieces roller bearing Ø 35 mm Kodjiv Irlepfx Ah Nedg - roller width 18 mm - hydraulic self centering dimension L x W x H: 350 x 250 x 550 mm dead weight: 65 kg good condition

Condition: good (used), Year of construction: 1977, workpiece weight 279 KG length ca. von Bett bis Lynette mm Kdsdpfx Aherfd U Rj Nog 189 € . max durchlass 369 mm

Condition: good (used), Fixed steady rest with roller inserts Max. clamping diameter: 200 mm Centre height approx.: 250 mm Kedpfx Ahex Urvmj Njdg Below: 2 (individual) counter-supports Most likely from a VDF lathe

Condition: used, Steady rest, steady for lathe, travelling type for mounting on lathe carriage. Centre height: approx. 200 mm. Machining diameter: 90 mm. Steady rest base: 60 x 45 mm, Ø 16 mm. Hole spacing: 208 mm. - 2 adjustable bronze guide shoes. Net weight: 6.5 kg. Good condition. Kjdpfx Ahsxw Rc Is Nodg

Condition: used, bed width 220 mm daylight 130 mm centre height 240 mm dimensions of the machine ca. 0,5 x 0,3 x 0,15 m weight ca. 20 kg Additional lynette available upon request - Photo 2. Kedpfx Ahexn Tw As Nedg Machine dealer with own stock of 2500 m².

Condition: good (used), fixed steady rest from a Heidenreich & Harbeck, Hamburg 430, clearance approx. 140 mm Kedpfx Asxu A Svoh Nedg and travelling steady rest for WEIPERT 425

Condition: used, Year of construction: 2000, swing diameter 530 mm 0 620 mm Ksdpfewdiwtjx Ah Nedg Wheel width 20 mm roll diameter 45 mm total power requirement ohne kW weight 250 kg dimensions of the machine ca. 1,2 x 0,30 x 1,3 m

Condition: good (used), Bezel, steady rest, lynette -Bezel: max. opening Ø 120 mm -Centre height: 180 mm -technical drawing: in the photos -Dimensions total: 390/120/H420 mm -Weight: 12.7 kg Kodpfxewtl Tce Ah Nsdg

Condition: used, Year of construction: 1998, turning length 3500 mm swing diameter 1000 mm centre height 500 mm turning diameter over slide 600 mm Kdedpev Hhv Isfx Ah Nsg weight of the machine ca. ca. 8,5 t including 2 lynettes and 900mm faceplate

Condition: used, Year of construction: 2011, turning length 1500 mm control SINUMERIK 828D centre height 270 mm greates pass round over bed 540 mm swing diameter over slide rest 310 mm Ksdpfxjxyaf Rj Ah Nsdg bed width 350 mm max. workpiece weight 1500 kg spindle bore 85 mm turning speeds 27 - 2250 U/min main drive DC 11 kW MACHINE EQUIPMENT: - AME chip conveyor - Lynette - Heavy grey cast iron bed for optimum damping and reduced tool wear - Inductively hardened and parallel synchronised bed guides - Counter guides completely Turcite-coated and hand-scraped - Hardened and ground ball screws - Thermosymmetrical headstock - Main drive 11 kW - Infinitely variable speed range 27-2250 rpm with 3-stage gearbox

Condition: used, grinding diameter 1900 mm grinding length 6500 mm swing diameter / mm electric control SIEMENS winCC required space 14,0 x 5,76 m total wight ca. 70 t Equipped with digitally programmable controls Lynettes are not available, but they can be custom-made upon request for an additional charge. Machine manufacturer: NAXOS UNION Machine model: WE1800 x 6500 mm Type: WE1800 x 6500 mm Year of manufacture: Unknown Current location: 58256 Ennepetal (dismantled) Grinding diameter: 1900 Grinding length: 6500 Control type: Conventional (with control panel) Grinding wheel dimensions: 827 mm Wheel speed: 807 rpm Coolant system: Yes Machine length (mm): 14000 Machine height (mm): approx. 2000 Kdedpov N Rccsfx Ah Neg Machine width (mm): 5760 Machine weight (kg): 70000 Z-slide speed: 2500 mm/min

Condition: used, L + Z Lathe WEWAG Model 250 / 1500 make no. 20953 year of construction approx. 1975 center distance 1500 mm nominal turning diameter over bed Ø 500 mm turning diameter over bed max. Ø 510 mm Center height over bed 255 mm turning diameter over support Ø 300 mm Center height over support 150 mm spindle bore Ø 56 mm Spindle speed 18 - 1800 rpm. 24 steps lathe chuck support short taper DIN 55022 Kdodpfjlzm Eqex Ah Nog tailstock inner taper MK 5 drive power 4 kW and 6,7 kW pole-changing - 3-jaw lathe chuck BISON, Ø 250 mm - steel holder 4-fold for turning - fixed lynette - control cabinet fixed on the back of the machine weight 2500 kg

Condition: used, L + Z Lathe WAFUM Type TUD 40 Machine no. No. 35689 Year of construction 1975 Center width 1500 mm Turning diameter over bed Ø 440 mm Center height above bed 220 mm Center height above support Ø 125 mm Spindle bore Ø 56 mm Spindle speed 18 - 1800 rpm 36 steps Chuck flange short taper DIN 55027 size 6 Inner tailstock taper MK 5 Drive power 4 and 6.7 KW - Spindle speed via 2 motor speeds and 18 gear stages - 3-jaw lathe chuck Ø 315 mm BISON with 2 sets of chuck jaws (lathe and drilling jaws) - MULTIFIX size B quick-change steel holder with 2 interchangeable cassettes - Fixed lynette with plain bearing inside Ø 125 mm - Moving lynette with plain bearing inside Ø 100 mm - Guide rail for turning slim cone with automatic longitudinal feed - 1 piece rotating center point - Hinged chuck guard Space requirement L x W x H 3100 x 1200 x 1450 mm weight 3000 kg Kdodpfx Asw Uf Hwoh Njg good condition

Condition: reconditioned (used), Year of construction: 1995, CYCLE LATHE WEILER " E 35" With 2 axes Siemens Sinumerik 805 Year of construction: 1995 Spindle bore: 54 mm Center distance: 950 mm Rotation O over bed: 410 mm Speed range: 4 - 3000 rpm With the following accessories: PARAT tool holder with 8 pcs. inserts Chuck guard 3 Jaw chuck 0 200 mm 4 jaw chucks 0 200 mm Fixed lynette 12 - 150 mm Chip collection tray Chip guard with lighting Coolant device 4 pcs. Height-adjustable machine shoes Operating instructions Kdjdpfx Aheuzyw Ds Nsg

Condition: good (used), Bezel, steady rest, lynette Kdsdeuqf Nvjpfx Ah Neg -Clamping tool: clamping bracket -Clamping width: 166 mm -Groove width: 32 mm -Dimensions: see photo technical drawing -Number: 2x clamps available -Price: per piece -Dimensions: 185/85/H47 mm / 184/82/H46 mm -Weight: 4.1 kg / 3.9 kg

Condition: used, lunette, steady rest, lynette -Clamping tool: clamping bracket -Clamping width: 108 mm -Dimensions: see photo technical drawing -Dimensions: 124/73/H130 mm -Weight: 1.8 kg Kdjdpfx Ahsuqf Tne Nsg

Condition: good (used), Bezel, setting stick, lynette -for: Crankshaft grinding machine -Technical drawing: see photos Quantity: 1 piece available -Dimensions: 380/85/H200 mm -Weight: 13.4 kg Kdjdpfog A I Euex Ah Nsg

Condition: used, Moving bezel, moving bezel, bezel, steady rest, lynette -Manufacturer: Meuser, steady rest from lathe M4L Kdedpfxsh Tgdqj Ah Neg -Max. Passage: Ø 180 mm -Center height: 315 mm -technical drawing: with the photos -Dimensions: 520/535/H560 mm -Weight: 32 kg

Condition: used, Bezel, steady rest, lynette -max passage. Ø: 320mm (410mm) -Center height: 500 mm -Drawing: with the photos -Dimensions: 1000/270/H900 mm Kodsd Nrpgjpfx Ah Nsdg -Weight: 216 kg

Condition: good (used), Bezel moving, moving bezel, steady rest, Lynette -max. passage: Ø 170 mm Kdedpfx Ahjdna Afs Neg -Support: ball bearing -Tip height: 345 mm -Hole spacing: 550 mm -Hole diameter: Ø 21 mm -Drawings: in the photos -Quantity: 1 piece available -Dimensions: 605/80/H670 mm -Weight: 59 kg

Condition: used, lunette, steady rest, lynette Kjdpfxju Rv Svs Ah Nodg -Clamping tool: clamping bracket -Clamping width: 142 mm -Dimensions: see photo technical drawing -Dimensions: 165/70/H125 mm -Weight: 2.5 kg

Condition: used, lunette, steady rest, lynette -Clamping tool: clamping bracket -Clamping width: 95 mm -Dimensions: see photo technical drawing -Dimensions: 110/60/H98 mm Kedouqf S Dspfx Ah Nsdg -Weight: 1.3 kg

Condition: used, lunette, steady rest, lynette -Clamping tool: clamping bracket -Clamping width: 101 mm -Dimensions: see photo technical drawing Kedpfsuqf Tbjx Ah Nodg -Dimensions: 117/83/H140 mm -Weight: 1.8 kg