Condition: new, Year of construction: 2023, ! Machine offer for customers in Lithuania / Latvia / Estonia. The new high-performance automatic bandsawing machines of the HBE Dynamic series, provide performance, ease of use and energy efficiency. You can rely on accurate and fast cuts in easy to difficult to cut materials, in solids, tubes and profiles. The rigid, low-vibration saw frame in cast iron construction and the linear guide system in portal design ensure the best cutting results and maximum blade service life. By the standard servo-downfeed system with BEHRINGER cutting pressure control, the HBE Dynamic series provides short idle times and a precise saw feed movement. The standard cutting pressure control prevents overloading of the saw blade and increases the lifetime significantly. It therefore offers the best conditions for a dynamic, tool gentle sawing. Available models: - HBE261A Chedpfx Acsiy Rc Rjysd - HBE321A - HBE411A - HBE511A

Condition: used, Make: Honeywell BraukmannType: R 295 SAType of installation: 2 Chodpjdc A R Rofx Acyed

Condition: used, Year of construction: 2017, with coolant system, hydraulic clamping, infeed and outfeed roller conveyors, and one separate control/operating panel Codpfxjxpy Ecj Acyehd

Year of construction: 2004, operating hours: 15,800 h, condition: ready for operation (used), General Data Machine weight 3000 kg This Behringer HBP 420-723 G Metal Band Saw was manufactured in 2004. It features a Silberland B 660 / 15 m powered roller conveyor from 2010 and has operated for approximately 15,800 hours. The saw offers a cutting speed of 10-120 m/min and is powered by a 5.5 kW saw drive motor. Ideal for handling a variety of cutting sizes and angles. Contact us for more information about this machine. Application Types Codpfoxpymmjx Acyshd Sawing

Condition: used, Year of construction: 1988, A fully automatic band saw with hydraulic material feed is for sale. Codpfx Acjxrtr Ijyjhd Manufacturer: Amada Model: HA 250 Year of manufacture: 1988 Location: Bremen The machine was stored in fully functional condition as a backup unit in case another saw failed. It has not been used since and the warehouse is now being cleared. _____ Our general terms and conditions apply; in addition, the seller assumes no liability for typographical or data transmission errors. The information and images have been provided to us by the owner and authorized for publication. The appearance of the items offered corresponds to their age and the images shown. The technical condition and wear of the items offered are appropriate for their age. Used machines are sold exclusively to commercial buyers and without any warranty.

Condition: excellent (used), Year of construction: 2010, Single-head cutting-off machine with ascending blade Blade diameter: 600 mm Blade tilting: -45° / +45° Blade rotation with digital readout No. 2 horizontal hold-down clamps No. 2 vertical hold-down clamps Safety guard (Roller conveyors available, not included) Chodpfewg Dm Iex Acysd

Condition: used, Year of construction: 2009, Circular saw KASTOflex F in good condition, documentation included. Can be tested in Kaunas. Specification Model: Kastoflex F Year: 2009 Weight: 2700 kg Power: 13 kW Dimensions: length 4800 x height 2225 x width 2580 Automatic feeding, dumping Sawn conveyor Corner cutting Pressure CNC controller Cutting at an angle of 90 (round, square, flat) 150 / 140 x 140 / 200 x 100 mm Cutting at an angle of 45 (round, square, flat) 145 / 120 x 120 / 160 x 80 mm Cutting at an angle of 60 (round, square, flat) 115 / 100 x 100 / 120 x 60 Disc diameter (Ø 350 mm opt.) Ø 400 to 450 mm Cedpfxjwfd Ico Acyshd If If you have more questions, we will be happy to answer them.

Condition: ready for operation (used), Year of construction: 2008, operating hours: 3,430 h, functionality: fully functional, machine/vehicle number: 7508, Technical Data: • Cutting diameter: 335 mm • Blade dimensions: 4400 x 34 x 1.1 mm • Feed range: 5 to 1000 mm per stroke • Cutting area at 90°: flat materials 500 x 335 mm • Cutting range at 45°: approx. 330 mm • Cutting area at 45°: flat materials 320 x 335 mm • Round cutting at 45° (left side): 305 mm • Cutting area at 45° (left side): flat materials 305 x 335 mm • Maximum cutting range at 30°: approx. 180 mm • Cutting area at 30°: flat materials 170 x 335 mm • Cutting speed: stepless adjustable from 15 to 150 m/min • Maximum material load: 250 kg/m • Total installed power: 3.0 kW • Machine weight: approx. 2550 kg • Required installation space: approx. 4350 x 2300 x 1900 mm Standard Equipment MEBAeco 335 DGA-1000: • Access protection according to CE with light barrier. • Heavy-duty, dual-column linear construction of the MEBA band saw with automatic material feed system (range 5–1000 mm per stroke). • CNC control enabling easy program entry and visualization. • Automatic cutting at any angle from 30°–135°, with programmable length and quantity of workpieces. • Capability to create and manage up to 255 cutting programs. • Intuitive data entry minimizes operator error risk. MEBA High Performance Package: • Saw feed via servomotor and ball screw mechanism with automatic monitoring of cutting pressure and feed. • Consistent and optimized working conditions for cutting various materials, including thin-walled profiles. • Precise and fast material positioning with AC rack drive, stroke length up to 1000 mm. • Clamp jaw system allowing opening from both sides, equipped with bars for transporting heavier material. Construction and Functionality: • Sturdy saw frame made from vibration-resistant welded steel. • Saw blade set at a 3° angle relative to the table to enhance performance and blade life when cutting steel profiles. • Composite blade guides with precision bearings to minimize blade deviation. • Carbide slideways for maximum precision. • 0-point (mitre rotation) located at blade/moving jaw intersection, eliminating the need for length adjustment during angle changes. • Automatic angle programming via control panel. Codpfx Acjw Adg Tjyjhd Vise System: • Patented dual mitre vise system with automatic position adjustment to the cutting angle, ensuring secure and exact material clamping near the cutting line. • Clamping by full-stroke hydraulic cylinders. Other Features: • Automatic lowering of the saw frame before the material at the start of the cut, minimizing cycle times. • Optimum conditions for both single and series cuts. • Steplessly adjustable band saw drive controlled by frequency inverter (15–150 m/min). • Precisely machined parts eliminating play/backlash.

Condition: good (used), Year of construction: 2015, functionality: fully functional, saw blade diameter: 600 mm, cutting range round steel at 90°: 220 mm, For sale: 1 used CNC fully automatic aluminum circular saw incl. suction unit Manufacturer: Tronzadoras MG Model: GAA-600 - CNC YEAR OF MANUFACTURE: 2015 TECHNICAL DATA - Cutting range round: 220mm, box: 300 x 90mm, square: 175mm - Drive power 4.1 KW / 400 V / 50 Hz Cjdpouyyhaefx Acyshd - Speed 3000 rpm. - Cutting speed 55 m/sec. - Blade dimensions 600 x 50 mm - max. cutting height 220 mm - Dimension 2020 x 1510 x 975 mm - Weight 650 kg Machine comes incl. 6m infeed roller conveyor and the appropriate extraction system. The saw can be inspected in our warehouse in 09599 Freiberg.

Condition: good (used), functionality: fully functional, Specifications: Cutting speed: - 3 gear stages: 15 – 78 m/min 63 – 320 m/min Chjdpfx Acexptxisysd 105 – 940 m/min High-speed speed 2350 m/min Support table W x D approx. 700 x 600 mm Thrust approx. 480 mm Max. cutting height approx. 360 mm Space requirement, W x D x H approx. 1.1 x 0.8 m Weight approx. 750 kg Table tiltable .

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, saw blade diameter: 200 mm, Fully automatic metal circular saw for burr-free cuts and high sawing performance in thin-walled material Manufacturer: Rohbi Series: RKA-86 Control system: Siemens Year of manufacture: 2007 Origin: Switzerland technical data: ----- - High-speed spindle for saw blade 500 - 3,900 rpm (2.0 kW) - Clamping cylinder pneum. 2.000 N - Cutting range round solid material with HSS saw blade: 2-60 mm - Cutting range profiles solid material with HSS saw blade: 60x40 mm - Cutting range round pipe material with HSS saw blade: 2-70 mm - Cutting range profile material with HSS saw blade: 80x40 mm - Material feed carriage max. stroke: 1,250 mm Drive via gear wheel / gear rack - Clamping vice clamping: hydraulic - Minimum quantity lubrication - Saw blade dimensions: 100 - 200 mm (HSS or solid carbide) - Saw blade monitoring via load pick-up - Chip removal via external extraction possible - Material removal via retracting chute Chsdpfjtxlxusx Acyjd - Weight: 900 kg Accessories: ----- - Operating instructions - 3x sets of clamping jaws with drawings

Condition: good (used), Year of construction: 2006, Year: 2006 - technically efficient, ready to work - after full service - cutting length: 6000 mm - discs: 550 mm - E555 control - digital angle indicator Chjdpjr Ikvuofx Acyod - pneumatic angle adjustment 45-90 degrees - cutting according to external dimensions, without correction - cooling installation - roller feeder - vertical pneumatic clamps - automatically lowered and raised disc guards - chip extraction for each head

Condition: used, Bandsaw Bomar 450SL. In good condition, documentation included. Can be tested in Kaunas. Specification: Model. Csdsqk U Rrspfx Acyjhd Bomar 450 450 Bomar 450 Bomar 450 Bomar 450 Bomar 450 Bomar 450 Bomar 450.

Condition: used, Miter left 60° + right 45° Hydropneumatic control of the saw unit Electropneumatic material feed unit Smooth-running, high-performance worm drive with a large gear ratio, integrated into a robust cast housing for optimal cutting results Clamping fixture with double clamping arm for burr-minimized cuts, additionally featuring a lateral quick-shift for miter changes Chodpjxfr Nlsfx Acyjd Precision prism guide for the gearbox head, laterally adjustable Especially stable base frame with integrated automatic cooling and large chip drawer CNC control: By entering various parameters such as quantity and material length, the CNC version is the ideal solution to optimize workflows.

Condition: used, Wood chip boilers Schmid UTSR 900 and UTSR 240, output 900kW + 240kW, year of manufacture 1997, moving grate combustion system (suitable for lower fuel quality), including pneumatic cleaning for 900kW, including ash removal system into container, including multicyclone separator, including feed screw, including walking floor with hydraulic unit - 2 pieces push rods 11m length, 3m total width, including control system, heat exchanger of 900kW unit is leaking, including 2 pieces of 5000l buffer tanks, including chimney systems, disassembly must be carried out by the buyer! Including system documentation! More pictures on request! Heating station layout available! Codpfx Aovyrwpecyehd

Condition: used, functionality: fully functional, saw band length: 4,800 mm, saw band width: 16 mm, type of input current: three-phase, empty load weight: 1,200 kg, Equipment: rotational speed infinitely variable, Pehaka USF -10-R Good condition – ready for immediate use. Table size 750x840mm, hydraulically adjustable; fixed table 500x580mm Band speeds: 12 m/min up to 2000 m/min Infinitely variable drive – variomatic File band device Circular cutting device No welding unit Codpjxrb Azjfx Acyehd Transport can be organized at buyer’s expense upon request Free loaded on truck (FCA); loading for collection is no problem Collection possible at any time Shipping also available outside the EU For further questions, feel free to call.

Condition: reconditioned (used), Year of construction: 1992, functionality: fully functional, The fully hydraulic production hacksaw has a universal hydraulic system for cutting thin and thick-walled profiles as well as solid material exclusively or alternately without changing the saw blade with the uniform tooth pitch of 3 or 4 teeth per inch. per inch. Pre-tensioned bow guide, closed oil hydraulics, triple swivel bearing, separate coolant system, infinitely adjustable hydraulic cutting pressure, lifting movement and accelerated return stroke, equipped as standard with infinitely variable mitre device as standard. Lifting of the saw bow in rapid motion. Pendulum vice for perfect saw blade utilisation. Longitudinal guide with ground and hardened guide rails for transferring the cutting pressure forces to the saw bow. Automatic limit stop. Push button operation for functions on, off and upward movement of the saw bow. Manufacturer KASTO Metal hacksaw Machine type EBS 360 U Chodpfoh Ug Egjx Acyod Drive power: 4,4 KW Stroke rates: 37/51/74/102 min Cutting speed: 14/20/28/39 m/min Universal hydraulics: standard Saw feed hydraulics Cutting range round: 660 mm Cutting range flat: 360x200 mm Mitre 0-45 ° Material support height: 500 mm Weight: 820 kg. Length/width: 1915x750 mm Height: 1090 mm Saw blade dimension: 550x45x2 mm Accessories. Coolant system The function of the machines has been checked and repaired. If you have any questions, please do not hesitate to contact us. If you need a different cutting range, please let us know, as we still have other machines in stock. We reserve the right of ownership until all our claims have been paid in full. With kind regards Michael Maurath

Condition: used, Year of construction: 1996, functionality: fully functional, saw blade diameter: 380 mm, cutting height (max.): 80 mm, total height: 1,500 mm, overall weight: 450 kg, cutting range square steel at 90°: 80 mm, space requirement height: 1,500 mm, space requirement length: 8,000 mm, coolant pump power: 10 W, - for metal processing Chjdpfx Aexq Twhjcyod - with 2 x 5 m roller conveyor - self-collection in 16348 or organised, paid delivery

Condition: refurbished (used), Year of construction: 1991, For sale is a Kaltenbach cold circular saw. The machine has been completely disassembled and rebuilt. As part of the overhaul, the gearbox, motor, and hydraulics were reconditioned. The table has been planed and fitted with new bearings. Gearbox backlash-free! Type: KKS 400 E Year: 1991 Saw blade diameter: 400 mm Motor power: 1.8/2.7 kW Cutting speed: 10/20, 13/26, 15/30 m/min Feed rate: 0 – 1,000 mm/min Rapid advance/return: 1,550 mm/min Max. working area: 130 mm Working area for square material: 120 mm Working area for flat material: 305 x 20 mm Working area for round material: 130 mm Min. working area: 10 x 10 mm Mitre range: 0° – 90° – 0° Dimensions LxWxH: 1,080 x 900 x 1,760 mm Weight: 900 kg Inspection / collection in 89558 Böhmenkirch Shipping available on request Codpfexq S Ilsx Acyshd Forklift available for loading.

Condition: excellent (used), Year of construction: 2016, Metallkraft HMBS 400 CNC Year of manufacture: 2016 Control type: CNC Cutting ranges: 0° round (pipe): 400 mm 0° round (solid material): 400 mm 0° rectangular horizontal (hollow section): 400 x 400 mm 0° bundle rectangular horizontal (hollow section): 400 x 220 mm Saw blade: Chsdpfjwx Rvmex Acyod Length: 4520 mm Width: 34 mm Thickness: 1.1 mm Speed: steplessly adjustable from 20 to 100 m/min Material feed: Maximum in one stroke: 490 mm Maximum: 9999 mm Minimum: 3 mm

Condition: used, Year of construction: 1991, saw blade diameter 425 mm cutting diameter 130 / 140 mm capacity 90 degrees: square 120 x 120 mm capacity 90 degrees: flat 260 x 80 mm cutting speed 11 / 22 m/min capacity 45 degrees: flat 180 x 80 mm capacity 45 degrees: round 130 mm capacity 45 degrees: square 110 x 110 mm work height max. 1050 mm Drive 1,6 / 2,5 kW weight of the machine ca. 1160 kg dimensions of the machine ca. 1,25 x 1,2 x 1,9 m Semi-automatic hydr. Miter circular saw machine with miter adjustment via Cedpjvmtdkefx Acyshd turntable, saw blade comes from below, hydr. Material clamping, stepless feed speed, 1 horizontal vice. Semi-automatic operation means: 1. Clamp the material, 2. Saw, 3. Saw blade return, 4. Relax the material. Infeed roller conveyor 2000 mm and discharge roller conveyor with stop 1500 mm, roller width 400 mm from a similar machine would be available for an additional charge of €300. But they should be adjusted by the buyer. (see last picture). The price is an already reduced special price. For an additional charge at cost: 2000 mm infeed roller conveyor and 1500 mm outfeed roller conveyor with stop. 400 mm roller width from a similar machine would be available for €300. However, these must be customized by the buyer (see last image). Machine dealer with own stock of 1600 m².

Condition: used, Year of construction: 2008, Behringer Eisele HCS 150, year of manufacture 2008, feed magazine, cut-off disposal. The machine is operational and can be purchased in its current condition or fully reconditioned by us including assembly. Type: HCS 150 Machine number: Type no.: 49600H0024 Cedpsxpd D Njfx Acyjhd Year of manufacture: 2008 Weight: 4,500 kg Required space: 9.3 m x 7.5 m Control: Siemens PLC control Round material (max.): Ø 150 mm Flat material (max.): □ 135 mm Saw blade feed: 0.5 - 40 mm/min Compartments incl. roller conveyor: 11 units Single compartment load: max. 500 kg at 3 m bar length Total load capacity: 4,000 kg Conveyor manufacturer: Geppert Conveyor length: 1,500 mm Conveyor width: 400 mm Conveyor speed: 6.3 m/min Total power requirement: approx. 34 kW Voltage: 400 V Air connection: 6 Bar

Condition: like new (used), Year of construction: 2021, Cold circular saw with 40 hours as new Codpfevxr H Isx Acyjhd

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, KASTOssb A2, year of manufacture 2008. Photos show the current condition; the machine is still being reconditioned. Technical data: - Cutting range round: 260 mm - Cutting range square (W x H): 260 x 260 mm - Smallest cuttable size: 10 x 10 mm - Shortest length of cut-off piece: 5 mm - Shortest remnant length in single cut: 110 mm - Length: 1670 mm - Width incl. chip conveyor: 2080 mm - Height: 2130 mm - Machine weight approx.: 2200 kg Csdpfx Acexn Ix Usyohd - Total connected load: 9.5 kW - Saw motor power: 5.5 kW - Continuously adjustable cutting speed: 15 – 125 m / min - Automatic material feed length, single stroke: 600 mm - Automatic material feed length, multiple stroke: 9999 mm - Saw blade dimensions: 4,115 x 41 x 1.3 mm

Condition: good (used), Year of construction: 2002, • Technical machine advantages: o - Design: 90° automatic saw o - Design: 90˚ up to d= Ø 400 mm or flat 400 x 400 mm o - Saw blade dimensions: 5700 x 41 x 1.3 mm Codov U Az Ujpfx Acyshd o - Cutting speed: 20 - 110 m/min