Condition: used, capacity 90 degrees: round 110 mm capacity 90 degrees: flat 255x160 mm capacity 90 degrees: square 210x210 mm capacity 45 degrees: round 160 mm capacity 45 degrees: flat 165x110 mm cutting range 45 degree right side: square 150x150 mm cutting speed 11/13/17/22/26/34 m/min Nedpfx Alswf Dy Senjcu stroke speeds 50/64/82/100/128/164 Hübe/min dimensions of saw-blade 400x36x2 mm power requirement 1,8 kW

Condition: used, roll diameter 420 mm throat 410 mm saw band length 3150 - 3260 mm saw band width 3-16 Nsdpfx Aloyclyaonecu weight ca. 600 kg

Condition: used, Year of construction: 1997, cutting diameter 520 mm Nsdoxfwd Ijpfx Alnscu saw band length 7239 mm cutting range square 520 x 520 mm feed length 500 mm feed length 4500 mm cutting length min. 6 mm 10/100 mm cutting speed 20 - 130 m/min dimensions of saw-band 7239 x 50 x 1,3 mm weight of the machine ca. 4,2 t dimensions 2300 x 3420 x 2385 m Control MINIPOS 807 CNC control Minipos 807 Special accessories: - Coolant device - Chip conveyor - Removal roller conveyor - Standard jaws

Condition: good (used), Manufactured by: Stanko Tilt table Table size: 560 x 560 mm Design: 400 mm Maximum cutting height: 240 mm Belt length: 3150 mm Ncodpfxsv S Ukvo Alnju Adjustable speed

Year of construction: 2014, condition: used, functionality: fully functional, empty load weight: 360 kg, total length: 2,200 mm, construction height: 400 mm, drive type: Keine, construction width: 1,200 mm, Other Condition: Like new Technical condition: very good Description: OST STEIRER hydraulic tipping body – year of manufacture 2016/9 – very good condition – original paint – dimensions: 2.20m x 1.20m x 0.40m – excluding VAT. Nodpfjzcipxjx Alnocu

Condition: new, MACC SPECIAL 411 CSO band saw with gravity feed New, CE compliant The key features of the machine (blade support rigidity, flywheel sizing, band guide, band tensioning) have been the subject of careful study in order to prevent band stress, increase its lifespan, improve cutting linearity, and reduce cutting time. – Band saw with arc-cut, adjustable by a hydraulic circuit, manual bar feed and vice closure, manual head return – Vertical rotation on a pin with adjustable tapered roller bearings, free of play – Band drive with a two-speed motor and a special gearbox with a bronze gear and a hardened and ground worm gear – Appropriately sized flywheels – Robust band guides made with sealed guide bearings and adjustable carbide inserts – Band tension obtained via an electromechanical device with a microswitch-controlled blade rotation – Vice with quick-feed device – Safety device on the flywheel cover, on the control handle, and on the blade – Hydraulic cylinder for controlled descent – Cutting thickness 1.2 mm – Cutting range 45° left, 60° right – Adjustable stop for cuts of the same size – Low-voltage 24 V system – 0.06 kW electric pump for band cooling – Stand with drawer for chip collection and removable tank for coolant – Machine designed for movement with a pallet truck Nodsficb Tspfx Alnscu

Condition: new, Semi-automatic band saw for cutting medium and large-sized solid bars and profiles, offering high performance and excellent cutting accuracy. The robust structure provides the machine with the necessary rigidity and precision for the cutting unit. Band control with a motor driven by an inverter and a special gearbox with a bronze gear and a hardened and ground worm gear. Appropriately sized flywheels. Robust band guides made with sealed guide bearings and adjustable carbide inserts. Band tension is achieved via an electromechanical device with a microswitch-controlled blade rotation. Safety device to prevent accidents on the flywheel cover and on the blade. Cutting thickness: 1.5 mm Cutting range: 60° left / 60° right Brush band cleaning device Hydraulic power unit motor: 0.37 kW Electric pump: 0.09 kW for band cooling Vise, jaw height: 250 mm Nodpfsfh R Tuex Alnecu Vise, jaw length: 200 mm Work table height: 760 mm Machine weight: 1250 kg / 12260 N

Condition: new, Semi-automatic band saw for cutting medium-sized solid bars and profiles, offering high performance and excellent cutting accuracy. The robust structure provides the machine with the necessary rigidity and precision for the cutting unit. Belt drive with a two-speed motor and a special gearbox with a bronze gear and a hardened and ground worm gear. Properly sized flywheels. Heavy-duty belt guides made with sealed guide bearings and adjustable carbide inserts. Belt tension achieved via an electromechanical device with a microswitch-controlled blade rotation. Safety device to prevent accidents on the flywheel cover and on the blade. Cutting thickness: 1.5 mm. Cutting angle: 60° left, 60° right. Adjustable stop for making cuts of the same size. Brush-type belt cleaning device. Hydraulic power unit motor: 0.37 kW. Electric pump: 0.09 kW for belt cooling. Vise, jaw height: 200 mm. Vise, jaw length: 185 mm. Ncedpfofibd Tsx Alnou Worktable height: 760 mm. Machine weight: 820 kg.

Condition: new, MACC 320 MS semi-automatic bandsaw New item – “CE” marked Technical data sheet attached. Available for immediate delivery, subject to prior sale. The key features of the machine (blade support rigidity, flywheel sizing, blade guide, blade tensioning) have been the subject of careful study in order to prevent blade yielding, increase durability, improve cutting linearity, and reduce cutting time. Vertical rotation on a spindle with adjustable tapered roller bearings, free of play. Ncodpjfibfasfx Alnju Blade drive with a two-speed motor and a special gearbox with a bronze gear and a hardened and ground worm gear. Flywheels sized appropriately. Robust blade guides made with sealed guide bearings and adjustable carbide inserts. Blade tension achieved via an electromechanical device with a microswitch-controlled blade rotation. Safety device to prevent accidents on the flywheel cover, the control knob, and the blade. Cutting thickness: 1.2 mm Cutting range: from 0 to 60° to the right Adjustable stop for cuts of the same size. 0.06 kW electric pump for blade cooling. Operation: Starting the cutting cycle via the start button; the machine: 1. closes the clamp and activates the blade motor 2. lowers the arm for cutting 3. the arm returns to its starting position 4. stops the blade motor 5. opens the clamp Manual cutting option available. ACCESSORIES AVAILABLE UPON REQUEST: Single-phase 69 m/min motor Variable speed drive from 20 to 90 m/min

Condition: new, CNC hydraulic automatic bandsaw for cuts from 0° to 60° to the right, complying with all CE safety regulations. The machine features 9 programs, each consisting of 99 steps, for a total of approximately 890 cutting positions with corresponding piece counting. Operation: Material feed. Fixed clamp closure. Nodeg Np Dxopfx Alnjcu Blade rotation and emulsion fluid dispensing; the saw head descends until the cut is complete, and the feed carriage returns to the set position. Saw head return, blade rotation stop, and coolant dispensing. Fixed clamp opening. Cycle repetition. Step-by-step feed via ball screw. Numerical control of cut quantity and length. Hydraulic power unit with cutting pressure adjustment. Blade tensioning achieved through manual rotation of the handwheel and guaranteed by an electromechanical device. Brush-type chip removal device. Bimetallic band saw blade 3010 x 27 x 0.9 mm. Hydraulic power unit motor 0.75 kW. Cutting thickness 1.2 mm. Material feed stroke 600 mm. Electric pump 0.09 kW.

Condition: new, NEBES TM 275 band saw – 400 V Three-phase NEW “CE” Induction motor Cast iron frame Cutting angle adjustable from 0° to 60° Entirely cast iron structure Electric pump for blade lubrication and cooling Oil-bath blade tension gauge Front controls and two cutting speeds Switch for deactivating the cooling pump Blade guide with carbide sliding blocks (H.M.) Round stock cutting 0°: 220 mm Square stock cutting 0°: 200 x 200 mm Flat stock cutting 0°: 230 x 185 mm Round stock cutting 45°: 150 mm Ncsdpfx Aeh Nm Ncolneu Square stock cutting 45°: 150 x 150 mm Flat stock cutting 45°: 150 x 200 mm Round stock cutting 60°: 90 mm Square stock cutting 60°: 90 x 90 mm Flat stock cutting 60°: 90 x 120 mm HP 1.3 Voltage 400 V Blade dimensions 2450 x 27 x 0.90 mm Weight 265 kg

Condition: new, The SPECIAL 411 MS MACC is a semi-automatic bandsaw for cutting solid bars and small-sized profiles, offering high performance and excellent precision. The robust structure provides the machine with the necessary rigidity and precision for the cutting unit. The bandsaw drive is equipped with a two-speed motor, and the special gearbox, complete with a bronze gear, features a hardened and ground worm gear. Appropriately sized flywheels and robust bandsaw guides are made with sealed ball bearings and adjustable tungsten carbide inserts. Using an electromechanical microswitch control, the bandsaw can be tensioned during blade rotation. Equipped with a safety device to prevent accidents on the flywheel cover and the blade, the machine is completed by a rotating table for supporting the material and a vice with a quick-feed device. Operation: Starting the cutting cycle via the start button, the machine: 1. closes the vice and activates the bandsaw motor 2. lowers the saw frame for cutting Ncodpfx Alefh R Tyonou 3. the saw frame returns to its starting position 4. stops the bandsaw motor 5. opens the vice Manual cutting option available. Cutting speed (m/min) 38-77 Cutting thickness (mm) 1.2 Cutting range: 45° left to 60° right Stop for cuts of the same size: Adjustable Electric pump for bandsaw cooling: 0.06 kW

Condition: new, Showroom promotion... NEW, unit No. 1 available for immediate delivery. CE certified. The MACC SPECIAL 335 MS is a semi-automatic bandsaw for cutting solid bars and small-sized profiles, offering high performance and excellent precision. The robust structure provides the machine with the necessary rigidity and precision for the cutting unit. The bandsaw drive is equipped with a two-speed motor and a special gearbox complete with a bronze gear, hardened, and ground worm screw. The appropriately sized flywheels and robust bandsaw guides are made with sealed ball bearings and adjustable Widia inserts. Using an electromechanical microswitch control, the bandsaw can be tensioned with the rotation of the blade. Equipped with a safety device on the flywheel cover and the blade, the machine is completed with a rotating table for supporting the material and a vice with a quick-feed device. Operation: Starting the cutting cycle via the start button, the machine: 1. closes the vice and activates the bandsaw motor; 2. lowers the saw arm for cutting; 3. the saw arm returns to the starting position; 4. stops the bandsaw motor; 5. opens the vice. Manual cutting is also possible. Cutting speed (m/min): 38-77. Cutting thickness (mm): 1.2. Cutting range: 45° left, 60° right. Stop for cutting the same size: adjustable. Electric pump for bandsaw cooling: 0.06 kW. Cutting capacity at 0° (round, square, rectangular): 260 / 250x250 / 220x330. Cutting capacity at 45° left (round, square, rectangular): 225 / 210x210 / 160x225. Cutting capacity at 45° right (round, square, rectangular): 215 / 200x200 / 160x210. Cutting capacity at 60° right (round, square, rectangular): 130 / 130x130 / 130x140. Blade dimensions: 3010x27x0.9. Weight [kg]: 415. Ncodpfxeg S Ui Ae Alnju

Condition: new, NEBES TM 210 BANDSAW - Single-phase 230V Cast iron frame Cutting angle adjustable from 0° to 60° Entirely cast iron structure with a large quick-release vise and a workpiece clamping wheel Nedpji Ezq Djfx Alnscu Electric pump for blade lubrication and cooling Blade tensioning system with cup springs and an oil-filled blade tension gauge, to ensure constant tension Two cutting speeds and an induction motor 0.03 mm precision on a 100 mm cut height Cutting Capacity: 0° 45° 60° Ø 185 mm Ø 120 mm Ø 60 mm 180×180 mm 100×100 mm 60×60 mm 200×140 mm 100×100 mm 60×60 mm Weight: 179 kg

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, SEMI-AUTOMATIC CIRCULAR SAW MEP TIGER 352 SX EVO - Blade rotation at 4 speeds (15/30/45/90 rpm) Ncsdoxdr Rtopfx Alnju - Rotating table mounted on central spindle and axial bearing - Cutting head feed on double linear guideway - Mechanical stops at -45°, 0°, +45°, and +60° with locking device at any angle - User interface with display

Condition: new, Brand new machine No. 1 available for immediate delivery!! “CE” certified Made in Italy Nodpofibfgofx Alnjcu Cutting capacity: 0° = round tube mm 230 – square tube mm 220 – rectangular tube mm 170 x 300 45° = round tube mm 200 – square tube mm 180 – rectangular tube mm 180 x 230 60° = round tube mm 130 – square tube mm 120 – rectangular tube mm 110 x 130 TECHNICAL DATA AND STANDARD EQUIPMENT: Vertical rotation on a pin with adjustable tapered roller bearings, ensuring no play. Belt drive with a two-speed motor and a special gearbox with bronze gear and hardened and ground worm gear. Flywheels appropriately sized. Robust belt guides made with sealed guide bearings and adjustable Widia pads. Belt tension obtained via an electromechanical device with a microswitch-controlled blade rotation. Vise with quick-locking device. Safety device on the flywheel cover, control knob, and blade. Cutting thickness 1.2 mm Cutting range from 0 to 60° to the right Adjustable stop for cuts of the same size Low-voltage 24 V system 0.06 kW electric pump for belt cooling The fundamental characteristics of the machine (blade support rigidity, flywheel sizing, belt guides, belt tensioning) have been the subject of careful study to prevent belt yielding, increase its lifespan, improve linearity, and reduce cutting time.

Year of construction: 2002, condition: good (used), MEP CONDOR 90 CNC MR automatic CNC-controlled miter saw for cutting aluminum profiles, with automatic feed. Ncsdpfxsikztpj Alnou Used, in excellent condition.

Condition: good (used), Year of construction: 2008, Cutting range round Sawing capacity round 115 mm Max. Saw blade diameter Max. saw blade diameter 350 mm Cutting area rectangular Sawing capacity rectangular 200 x 70 mm Cutting area square Sawing capacity square 105 x 105 mm Sawing unit Sawing unit power 6.5/8 kw Saw shaft speed Speed on sawing shaft 1700/3400 rpm/rpm Maximum feed length Maximum feed length 9999 mm Shortest feed length Shortest feed length 10 mm Weight Weight 2300 kg Ausstattung / equipment: BEHRINGER SPS Steuerung / SPS Control Micro-Sprüheinrichtung / micro lubrication Controlled zero edge Cutting gap extension Maschinenleuchte / machine light Vertikale Hauptspannung / vertical main clamping Rücklaufsperre / non-return-device Nodpfx Asrz Rw Rolnocu Extraction system prepared - (basement extraction unit is not part of the delivery) Roller conveyor infeed approx. 5000 mm -roller conveyor infeed selfmade length 5000 mm

Condition: excellent (used), Year of construction: 2023, HYDRAULIC HIGH PERFORMANCE BAND SAW LINE Manufacturer: BEHRINGER Model: HBM 440 A Year: 2023 Condition: As new – only 82 operating hours Technical Specifications: - Cutting range (round): 440 mm - Cutting range (flat WxH): 440 x 440 mm - Minimum round/flat: 15 mm / 12 x 12 mm - Saw band dimensions: 6700 x 54 x 1.1 mm - Drive power: 11 kW - Cutting speed: 15 – 150 m/min - Material feed length per stroke: 600 mm - Material feed length, multiple stroke: Max. 5400 mm - Machine weight: 4600 kg - Dimensions (LxWxH): 4900 x 2650 x 2700 mm - Transport height: 2700 mm All information subject to change – errors excepted Equipment & Features: - Coolant system 200 l - Full enclosure of the saw - Chip conveyor - BEHRINGER BT 65 TOUCH CONTROL + AUTO FEED CONTROL - Automatic bar change, max. 3000 kg Infeed: - Magazine KM 45 F-VR /600-6,200 mm - Round material: 50 – 440 mm - Flat: 40 x 20 – 400 x 400 mm or 440 x 430 mm - Bar length: 600 – 6200 mm - Driven roller conveyor: 6100 mm - Usable material storage: 3000 mm - Safety fence Outfeed: - Output side: metal belt, ejector plate, storage table Nodpfx Asxw T Ugelnecu Metal belt: - For transporting cut pieces, finished parts, and remnants - Width: 550 mm, length: 4200 mm - Guides on both sides up to 1000 mm length Side ejector for short bars (pusher) Storage table for cut material and stock: - Max. weight: 1000 kg - Length: 2400 mm - Usable depth: 1500 mm Subject to prior sale

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, OPPORTUNITY – IMMEDIATELY AVAILABLE HYDRAULIC HIGH PERFORMANCE BAND SAWING LINE MANUFACTURER: BEHRINGER MODEL: HBM 440 A PC-E YEAR OF MANUFACTURE: 2015 Sawing capacity round: 440 mm Sawing capacity flat (W x H): 440 x 440 mm Minimum round / flat: 30 mm / 20 x 20 mm Saw blade dimension: 6700 x 54 x 1.1 mm Drive power: 11 kW Cutting speed: 20 – 200 m/min Material feed per stroke: 600 mm Material feed, multiple: max. 5400 mm Machine weight: 8,200 kg Dimensions (L x W x H): 6500 x 5000 x 2700 mm Transport height: 2400 mm Specifications subject to change – errors excepted Equipment: - Coolant system 200 l - Full enclosure of the saw - Material infeed support, 1650 mm length - Chip conveyor - BEHRINGER CNC dialogue computer IP 65, BEHRINGER dialogue control IP 65 - Automatic bar change - Sorting unit in portal design: - Usable stroke of gripper: 4660 mm Nsdpfx Aloxwqm Honscu - Depth of storage: 2000 mm - Max. cut-off length: 4000 mm - Max. single workpiece weight: 1500 kg - Infeed magazine KM 45 F-VR / 600-6,200: - Round material: 50 – 440 mm - Flat material: 40 x 20 – 400 x 400 mm or 440 x 430 mm - Bar length: 600 – 6200 mm - Powered roller conveyor: 6100 mm - Usable material storage: 3000 mm - Safety fence PRIOR SALE AND AVAILABILITY RESERVED

Condition: new, Year of construction: 2026, CORMAK BS370H Semi-Automatic Metal Band Saw The CORMAK BS370H is a robust semi-automatic band saw designed for precise cutting of tubes, profiles, and solid materials. The latest version is equipped with an upper clamping system for bundle cutting and variable blade speed control via an inverter, adjustable from 20 to 90 m/min. These enhancements increase the machine’s versatility and make it easier to adapt cutting parameters to different types of materials. The upper clamp stabilizes stacked workpieces and minimizes movement during cutting. This allows for more efficient cutting of bundles of profiles, tubes, and other repetitive components. Key Advantages Upper material clamp – stable and efficient bundle cutting. Variable blade speed (20–90 m/min) – speed adjustment via frequency inverter. Semi-automatic operation – hydraulic material clamping, saw head lowering, and automatic return. Mitre cutting from -45° to +60° – wide range of cutting applications. Hydraulically operated vise – fast and repeatable workpiece clamping. Infinitely adjustable downfeed rate – greater control over the cutting process. Blade guides with carbide inserts and bearings – precise blade tracking and improved cutting accuracy. Closed-loop coolant system – cools the cutting zone and dissipates heat effectively. Blade tension indicator – convenient monitoring of correct blade tension. Automatic shut-off in the event of blade breakage – enhanced machine protection and safety. Efficient Bundle Cutting The integrated upper clamp allows multiple workpieces to be securely held in place when stacked on top of each other. This is particularly beneficial for serial cutting of profiles, tubes, and other materials with repetitive dimensions. The material is secured both by the hydraulic vise and the upper clamp, reducing movement and lifting of individual pieces within the bundle as the blade passes through the material. Variable Blade Speed Control The blade speed can be continuously adjusted between 20 and 90 m/min. The inverter enables precise adaptation of cutting parameters according to the material type, cross-section, and specific cutting requirements. Semi-Automatic Operating Cycle Once the material is positioned and the cutting cycle is started, the machine automatically performs the following operations: The hydraulic vise clamps the workpiece. The saw head lowers at the preset feed rate. Njdpfx Aleycqhcenjcu The blade performs the cut. A limit switch detects completion of the cutting cycle. The saw head is hydraulically raised back to its starting position. The swiveling saw head enables cutting angles ranging from -45° to +60°. The material remains stationary while the operator adjusts the required cutting angle by rotating the saw head. Cutting Capacity at 90° Material Type Capacity Round Ø270 mm Square 220 × 220 mm Rectangular 370 × 220 mm Technical Specifications Parameter Value Model CORMAK BS370H Operation Mode Semi-automatic Mitre Cutting Range -45° to +60° Blade Speed Variable, 20–90 m/min Blade Speed Control Frequency inverter Upper Material Clamp Yes – for bundle cutting Blade Size 3160 × 27 × 0.9 mm Blade Tensioning Manual mechanical tensioning Saw Head Feed Control Infinitely variable hydraulic cylinder Vise Operation Hydraulic Vise Base Height 890 mm Power Supply 400 V / 3 Phase Total Power 1.5 kW Coolant Pump Power 46 W Machine Dimensions (with base) 1850 × 950 × 1500 mm Weight 491 kg

Condition: used, Year of construction: 2008, functionality: fully functional, saw blade diameter: 460 mm, cutting range round steel at 90°: 152 mm, Circular saw – automatic (used) Manufacturer: KASTO Model: VARIOSPEED C15 Year of manufacture: approx. 2008 Control: CNC control KASTO TECHNICAL DATA Saw blade diameter max. 460 mm Cutting range, round 152 mm Cutting range, square 135 mm Saw blade feed, continuously adjustable from 8 mm/min Saw blade feed, continuously adjustable up to 1000 mm/min Cutting speed 150 m/min Hydraulic clamping device: yes ELECTRICAL CONNECTION DATA Power consumption (total) 28 kW Connection voltage 400 V Mains frequency 50 Hz DIMENSIONS / WEIGHTS Space requirement – left/right – 10600 mm Space requirement – front/rear – 4500 mm Overall height 2340 mm Total weight approx. 3900 kg Ncodozd A Rqepfx Alnou Very good condition Serviced twice a year by the manufacturer Kasto

Condition: good (used), Year of construction: 2008, functionality: fully functional, saw blade diameter: 460 mm, cutting range round steel at 90°: 152 mm, total height: 2,340 mm, total width: 4,500 mm, cutting speed: 150 mm/min, overall weight: 3,900 kg, Circular saw – automatic (used) Manufacturer: KASTO Model: VARIOSPEED C15 Year of manufacture: approx. 2008 Control: CNC control KASTO TECHNICAL DATA Saw blade diameter max.: 460 mm Cutting range, round: 152 mm Cutting range, square: 135 mm Saw blade feed, continuously adjustable from: 8 mm/min Saw blade feed, continuously adjustable up to: 1000 mm/min Cutting speed: 150 m/min Hydraulic clamping device: yes ELECTRICAL CONNECTION DATA Power consumption (total): 28 kW Connection voltage: 400 V Mains frequency: 50 Hz DIMENSIONS / WEIGHTS Space requirement – left/right: 10600 mm Space requirement – front/rear: 4500 mm Overall height: 2340 mm Total weight approx.: 3900 kg Very good condition Serviced twice a year by the manufacturer Kasto Ncodpfx Alezd A Nteneu Includes robot and other expensive machine accessories

Condition: used, cutting diameter / mm saw band length 8800 mm cutting width / mm total power requirement / kW weight of the machine ca. / t Nodpfx Alozcgkmonocu required space / m

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, overall weight: 4,000 kg, Good morning, We have a German-made Meba automatic bandsaw for sale. The machine is in virtually perfect condition. Below is a description of the machine and its features. Designed for fully automatic and efficient production in the steel industry and trade, for cutting solid materials and difficult-to-machine materials. A 2-column automatic machine for cutting at a 90° angle, with a heavy, closed design that dampens vibrations. Minimal space requirement with the highest demands and best cutting results. Ncjdpfozd Ag Ssx Alnou Technical data: Parameter Round stock Rectangular profile Cutting range: 90° ø 430 mm 430 x 430 mm Maximum machine load: 1000 kg/m Cutting length: * Single stroke: 0 - 600 mm Multiple stroke: 0 - 9999 mm Cutting speed: AC frequency-controlled drive 15–150 m/min, stepless. Adjustable via NC control. Drive power: * Cutting blade: 7.5 kW; 400 V, 50 Hz Hydraulic system: 0.37 kW Coolant pump: 0.37 kW Cutting frame feed: Stepless up to 300 mm/min Cutting blade tension: Hydraulic Cutting blade dimensions: 6220 x 41 x 1.3 mm Length of lead-in (waste): In automatic mode: 25 mm (rectangular material) / 50 mm (round material) Working height: 750 mm (without mounting elements) Weight: 4100 kg Dimensions (L x W x H): 1700 x 3100 x 2350 mm (including chip conveyor) Equipment: -Automatic chip ejector -Chip trolley -Blade break sensor -Blade deviation sensor -Zero face (material positioning) -Interface for importing and exporting data via USB memory -Material database (automatic parameter selection, >500 materials, MEBA blade selection) -Oil mist lubrication -Adjustment of clamping force -Package clamp -Receiving table -Gun for rinsing chips from the machine -White color -Status signal column -Central lubrication -Infeed roller conveyor 3000x500 equipped with 9 rollers We are the official distributor of the Meba brand in Poland. The bandsaw has been inspected and found to be ready for further operation for many years to come.