Condition: used, Original roller conveyor / measuring stop for LTS 400 and LTS 460, available in 2 m and 3 m versions. Fjdezra Rkjpfx Akvopk

Condition: excellent (used), Condition: very good, item appears almost unused Roller width: 350 mm Fjdpfszra Rdox Akvepk Height adjustable from 650 mm to 950 mm Price for 3 pieces: 375.-- net

Condition: good (used), Precise work is achieved through sawing from below. A large swivel range of up to 45° to the left and up to 0° to the right is provided. The special swivel mechanism with an integrated rotary table allows work to be performed from the front at all angle settings. A workpiece stop that can be shifted towards the rear enables optimal use of the saw blade capacity when processing wide and flat profiles. Manual saw feed. Comes standard with a saw blade and base frame. Pneumatic material clamping device (vertical). Metering spray device. Maintenance unit. Fedpfx Akszdi Nmevepk

Condition: excellent (used), Year of construction: 2000, roll diameter 420 mm throat 400 mm workpiece height 280 mm saw band length 3200 - 3400 mm table - swivable +/- 20 ° Fpodpjxcp Sfefx Akvsk table surface area 600 x 600 mm table - tiltable +/- 45 ° total power requirement 1,7 kW weight of the machine ca. 0,5 t dimensions of the machine ca. 1 x 0,7 x 1,9 m

Condition: used, Heavy-duty, high-performance automatic band saw with a horizontally, parallel-traveling saw band, built 2005, for cutting round, square and flat material as well as tubes and profiles in all grades — especially tool steels and hard-to-machine materials (titanium, Hastelloy, Inconel, etc.). Cutting range: round ø430 mm, square/flat H×W 430×430 mm, clamping range 0–430 mm. Saw unit in steel-mineral-cast composite construction with KASTO TrumGuides vibration damping. Saw drive 15.0 kW (14.0 kW at the wheel), connected load 25.0 kW, stepless cutting speed 30–300 m/min, saw feed 0.5–300 mm/min. Automatic NC material feed via ball-screw drive, hydraulic clamping vises on both sides, hydraulically actuated and electronically monitored band tension, self-adjusting chip removal brush, automatic cutting-gap widening and automatic zero-positioning of the first cut. Fitted with a plate belt conveyor and KASTO EasyControl. Delivered WITHOUT infeed magazine — sold without the existing chain magazine. Fpsdpfszpb Eqox Akvek

Condition: good (used), Year of construction: 1999, Cutting length: 6,000 mm Fpedpfezn Iimox Akvsk Rotational speed: 2,800 rpm Total power: 11.3 kW

Condition: good (used), Year of construction: 2006, cutting diameter 335 mm Fodpszn Ahqsfx Akvepk capacity 90 degrees: flat 500 x 335 mm saw band length 4400 x 34 x 1.1 mm speed 15.0 - 150 m/min work height max. 750 mm workpiece weight 250 kg/m coolant tank capacity 80.0 ltr. oil volume 30.0 ltr. power capacity 5.5 kW weight of the machine ca. 1800 kg range L-W-H 2000 x 2200 x 1900 mm current list price: approx. 45.000 euros Special price available upon request Features: - MEBA - Fully automatic "two-column linear guide system" * Fully automatic machine for 90° cuts only - Automatic material feed - Continuously variable lowering speed 0â??300 mm/min - Band saw speed controlled by frequency-regulated AC drive (15â??150 m/min) - Automatic cutting pressure and feed monitoring - Hydraulic full-stroke material clamping - Automatic movement of the clamping blocks - Operatorâ??s manual

Condition: used, Year of construction: 2019, Saw blade diameter: 350 mm Cutting area flat 90°: 170 x 100 mm Sawing area flat 45°: 120 x 100 mm Cutting area round: 120 mm Pneumatic Saw Blade Feed Coolant pump / minimum quantity spray device Pneumatic material clamping Fjdpfxjznxg Ne Akvspk Presented for sawing of stainless steel Length stop with automatic positioning up to 6200 mm Roller conveyor with 1000 mm left Weight: approx. 800 kg

Condition: ready for operation (used), Cutting capacity, circular: 340 mm Fodpfsznvnkex Akvjpk Cutting capacity, flat: 340 x 290 mm Cutting capacity, square: 325 x 325 mm Saw blade dimensions: 600 x 52 x 2.5 mm Drive motor: 380 V, 6 kW Space requirement: 2100 x 2100 x 1470 mm Weight, approx.: 1840 kg

Condition: used, Year of construction: 2002, functionality: fully functional, Blade length up to 275 mm Year 2002 Automatic cutting cycle Blade descent on columns Blade speed variation Descent speed adjustment Blade cleaning brush Loading stroke 500 Pressure reducer for clamps BLADE HEIGHT 27 mm Fedpfszq Dpuex Akvepk

Condition: new, Year of construction: 2025, functionality: fully functional, power: 1.1 kW (1.50 HP), input voltage: 400 V, type of input current: three-phase, total height: 1,700 mm, total length: 1,400 mm, total width: 685 mm, overall weight: 200 kg, cutting range round steel at 45°: 145 mm, cutting range round steel at 90°: 225 mm, cutting range square steel at 45°: 150 mm, cutting range square steel at 90°: 190 mm, saw band length: 2,480 mm, saw band width: 27 mm, Saw band --- 2480 x 27 x 0.9 mm Saw speed --- 45 - 90 m/min Motor --- 400V - 1.1 kW Weight --- 200 kg Fpjdpsga Tzqjfx Akvek Cutting capacity at 0° ----- 225 mm / 190 x 190 mm / 245 x 150 mm Cutting capacity at 45° ----- 145 mm / 150 x 150 mm / 190 x 150 mm Cutting capacity at 60° ----- 90 mm / 90 x 90 mm / 120 x 90 mm INCLUDED * Adjustable material clamp * Graduations up to 60 degrees * Automatic shut-off * Low-noise electric motor * Enclosed worm gear transmission * Hydraulic pressure control * CE emergency stop * Coolant pump * Base cabinet * Quick-release clamp * M42 Bi-metal saw band

Condition: repair required (used), Year of construction: 2009, functionality: limited functionality, machine/vehicle number: 305484, saw blade diameter: 450 mm, cutting height (max.): 160 mm, feed length X-axis: 2,000 mm, cutting range round steel at 45°: 150 mm, cutting range round steel at 90°: 150 mm, type of input current: three-phase, cutting range square steel at 45°: 140 mm, cutting range square steel at 90°: 140 mm, CNC cold saw from the renowned brand Kaltenbach, model KKS 401 NA 2000. There is a lot of information to provide, so I have posted several pictures with basic details to give you an overview of the saw's capabilities. It is a rare model with a feeder (single piece) of 0-2000mm, as well as repeat cutting of 2000-9999mm. Automatic zeroing before cutting. CNC saw head with automatic rotation of +/-60 degrees, 2 types of lubrication, emulsion, and direct spray. Option to direct the cut piece to an ejector for small pieces, as well as a chain ejector with a function for lowering longer and heavier pieces. I haven't included this in the pictures as it is not installed, but the saw also comes with a set of protective guards with safety barriers and a large number of spare parts. The complete documentation is original and is linked to the machine's serial number, making installation easy and straightforward. Fpodpfxoyk Inps Akvek Problem explanation: the saw is connected to the electrical power supply, and each individual function (and there are many) is fully operational. The problem arises during automatic operation; the most likely cause is the program parameters themselves (it uses the Windows platform). I haven't been able to find a suitable programmer who can learn on my machine. Possible solution: I contacted the saw manufacturer, and they directed me to their authorized service provider, so I have their contact information, which I can provide to the future buyer. The estimated cost of repair in Serbia is between 3000-5000 EUR. If you are closer to Germany or the Czech Republic, this cost will be significantly lower. So, there are two price categories: if you buy the machine in its current condition, the price is as advertised. If I resolve the problem, the price will be considerably higher. The advertised price includes professional dismantling and loading onto a truck (a rather important, and not inexpensive, item). Transportation is at the buyer's expense. I hope I have clarified the current condition of the machine. Due to a change in business activities, the saw is surplus to production. Happy shopping!

Condition: used, Used ERHARD+SPIESS vertical band saw model HK 3C Fedpswkuytsfx Akvopk with combined filing device. Throat: 300mm with Ideal band welding device. Saw blade/band length approx. 2,800mm, width 3-10mm Throughput 200mm Cutting speed 9-800m/min, adjustable in steps Drive 1,400 / 2,800 rpm Table angle adjustment: right/left 15° each, forward/backward 10° each Filing machine stroke approx. 0-120mm, workpiece thickness max. 80mm, strokes/minute 75-300 Including 5 file holders with 5 different file shapes Delivery time: from stock. The machine can be inspected by appointment in 713334 Waiblingen Beinstein.

Condition: good (used), Year of construction: 2002, functionality: fully functional, Feature | Technical Data Machine Type | Fully automatic CNC pipe circular saw Cutting Type | Straight cut (90°) Pipe Diameter | Ø 8–80 mm (partially specified as 10–80 mm) Square Profiles | 10 × 10 to 70 × 70 mm Rectangular Profiles | Up to 80 × 70 mm Fpodpfx Akjzqdlcsvek Maximum Bar Length | 6,500 mm Minimum Bar Length | 2,000 mm Maximum Cutting Length | 4,500 mm Minimum Cutting Length | 50 m

Condition: excellent (used), Year of construction: 2008, Manufacturer: KALTENBACH Fpsdpfx Aket Ia Sysvok Type: KBC 350 NA Year of production: 2008 Dimensions (WxHxD): approx. 220x200x150 cm, with chip conveyor, 3 roller conveyors Dimensions: (WxHxD): approx. 220x80x60 cm, 2 of them with storage table. We also offer: 1. Kaltenbach KMR 100 AP 2008 (304096) 2. Kaltenbach KBC 350 NA 2008 (304133) 3. Kasto SSB 260 VA-CNC 2002 (6510 115 305) 4. Kasto SBA 280 AU 1998 (6406 102 056) 5th Kasto HBA 420 AU 1985 6th Kasto HBA 420 AU 1995 (6019 107 306) 7th Kasto HBA 420 AU 1995 (6019 159 107) 8th Kasto, type SSB 260 VA, year of construction 1994

Condition: excellent (used), Cutting capacity, circular: 255 mm Cutting capacity, rectangular: 315 x 230 mm Cutting capacity, square: 230 mm Fjdpfxjznh Nmj Akvspk Cutting capacity, miter cut at 45° circular: 160 mm Saw blade dimensions: 27 x 0.9 x 2750 mm Saw blade speed, infinitely adjustable Saw blade drive: 400 V, 1.5 kW Space requirement: 1800 x 1600 x approx. 1800 mm Weight: 380 kg

Condition: ready for operation (used), Max. cutting height: 87 mm Max. cutting length approx.: 200 mm Saw blade diameter max.: 250 mm Saw blade speeds via gearbox approx.: 90 - 4000 rpm Fpjdpfx Asznh Hfekvek Drive motor: 380 V, 1.2 kW Space requirement: 1050 x 750 x 1100 mm Weight approx.: 210 kg

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, cutting height (max.): 400 mm, Offer for automatic bandsaw SBA 361: P-CNC-FORTE-SBA361 Dear Ladies and Gentlemen, We are pleased to be able to offer you our high-quality FORTE SBA 361 automatic band saw from 2002. The machine is in used condition. Technical data - Maximum workpiece diameter: 400mm - Feed roller conveyor - Automatic with bar feed - Fjdpet I Emvsfx Akvopk Space requirement approx. (height/length/width): 270 cm / 500 cm / 300 cm Price net 26.000 € VHB

Condition: good (used), Year of construction: 1998, machine/vehicle number: 19188-98, Offer 25416 Technical data: - Cutting range at 90° round: 260 mm Fpodpfxszqtwus Akvok - Cutting range at 90° flat: 410 x 200 mm - Miter adjustable left + right: 90 to 30° - Cutting range at 45° right + left round: 220 mm - Cutting range at 45° right + left flat: 230 x 300 mm - Material support height: approx. 620 mm - Saw band dimensions: 3660 x 27 x 0.9 mm - Cutting speed: 17 - 106 m/min - Hydraulic lifting and lowering of the saw frame - Upper stroke limit of the saw frame - Cutting pressure continuously adjustable: 0 - 10 m/min - Hydraulic material clamping device - Saw band cleaning brush - Micro-spray coolant system - Total drive power: 400 V / 1.9 kW - Roller table length: 3300 mm - Space requirement with base frame: W 5200 x H 1600 x D 2000 mm - Weight with base frame: 1900 kg

Condition: good (used), Year of construction: 1994, Offer 24186 Technical data: - Manual saw blade feed - Workpiece clamping in the machine vice - Saw blade diameter up to 315 mm - 2 cutting speeds: 40 - 80 m/min - Cutting range: at 90° - Round: 110 mm - Rectangular: 82 x 160 mm - Square: 82 x 82 mm - Miter cut: at 45° - Round: 110 mm - Rectangular: 80 x 120 mm - Square: 82 x 82 mm Fpedpfxjzqtrfo Akvek - Drive: 400 V / 1.4 / 1.9 kW - Coolant system - Space requirement: approx. W 600 x H 1600 x D 750 mm - Weight: approx. 300 kg

Condition: good (used), Year of construction: 1996, machine/vehicle number: 5562, Offer 24212 Technical data: - Saw blade diameter: up to 350 mm - Saw blade feed via hand lever - Maximum opening width of the vise: 205 mm - Cutting range: - with saw blade diameter of 350 mm - at 90°: Fpsdpfozqtntox Akvsk - round: 120 mm - square: 110 mm - rectangular: up to 200 x 90 mm or 140 x 110 mm - at 45°: - round: 100 mm - rectangular: 100 x 100 mm - Miter adjustable: - Left: up to 45° - Right: up to 30° - Saw blade speeds: 34 + 68 1/min - Drive: 400 V / 2 / 2.6 kW - Coolant system - Feed – roller table: 2000 mm - Space requirement: approx. W 850 x H 1750 x D 950 mm - Weight: approx. 400 kg

Condition: used, Year of construction: 2026, The CORMAK HBS320 Metal Band Saw is a high-performance, professional cutting solution designed for workshops and industrial facilities that require a reliable machine for precise cutting of pipes, profiles, and solid metal stock. Its robust construction, wide mitre cutting range, and compatibility with material feeding systems make it a versatile metal band saw for both production and fabrication applications. Key Features Mitre cutting from -45° to +60° – allows bevel cuts in both directions without repositioning the workpiece. Powerful 1.5 kW motor – delivers consistent performance and cutting stability, even when processing hard materials. Cast iron saw bow – minimizes vibration, ensuring high cutting accuracy and long service life. Precision blade guides – equipped with bearings and carbide inserts to improve blade stability and extend blade life. Enhanced operator safety – protective guards and safety micro-switches stop the machine when required. Integrated coolant system – electric coolant pump improves cutting efficiency and assists with chip removal. Construction and Technology The machine features a welded steel frame mounted on a rigid base with an integrated coolant reservoir. The cast iron saw bow provides exceptional rigidity for the cutting assembly. Cutting is performed by a gravity-fed system with hydraulic cylinder feed control, ensuring smooth and consistent blade descent. A quick-action vise with a movable jaw allows fast and secure workpiece clamping. The machine offers two blade speeds, 44 or 88 m/min, together with infinitely adjustable feed rate control. Precision and Performance Thanks to its rigid blade guidance system, the HBS320 maintains excellent cutting accuracy even during continuous operation. The independent coolant tank and pump reduce cutting temperatures, improve cutting quality, and extend blade life. An automatic motor shut-off at the end of the cutting cycle helps reduce unnecessary wear on drive components. Applications The CORMAK HBS320 metal band saw is suitable for cutting: Structural steel Stainless steel Tool steel Fjdszqrrwspfx Akvspk Copper Aluminium Plastics It is an ideal solution for metal fabrication shops, tool rooms, steel structure manufacturers, maintenance workshops, and custom production facilities. Standard Equipment Quick-action machine vise Hydraulic feed cylinder with adjustable descent speed Coolant pump with coolant tray and chip collection system Two-speed blade drive Safety micro-switch protection system Optional Equipment Roller table extension Technical Specifications Specification Value Maximum round cutting capacity (90°) Ø 260 mm Maximum rectangular cutting capacity (90°) 320 × 160 mm Power supply 3-phase, 400 V Motor power 1.5 kW Feed control Hydraulic cylinder Blade size 2740 × 27 × 0.9 mm Blade speed 44 / 88 m/min Vise height 920 mm Overall dimensions 1400 × 880 × 1550 mm Weight 280 kg PLEASE NOTE! This machine is a returned item; it is second-hand but in working order. NO WARRANTY!

Year of construction: 1993, condition: ready for operation (used), controller manufacturer: SIEMENS, Metal Band Saw manufactured in 1993. This Friggi 2MF/AUT 800 x 800 2C features a cutting capacity of 800 x 800 mm and a round diameter of 800 mm. It is equipped with a powerful 7.4 kW saw blade motor and a hydraulic pump with a delivery rate of 58 L/min. If you are looking to get high-quality cutting capabilities, consider the Friggi 2MF/AUT 800 x 800 2C machine we have for sale. Contact us for further details. Fpedpfxjznazbo Akvok - Cutting Capacity (Rectangular): 800 x 800 mm- Cutting Capacity (Round Diameter): 800 mm- Front Minimum Cut: 105 mm- Rear Minimum Cut: 50 mm- Band Pulley Diameter: 900 mm- Blade Dimensions: 67 x 1.6 mm- Blade Length Range: 9,680 - 9,800 mm- Saw Blade Speed: 20 - 90 m/min- Saw Blade Motor Power: 7.4 kW- Saw Arm Movement Motor Power: 7.1 kW- Automatic Saw Arm Lowering Speed: 0 - 3000 mm/min- Hydraulic Pump Reservoir Capacity: 115 L- Hydraulic Pump Delivery Rate: 58 L/min- Hydraulic Pump Motor Power: 9.2 kW- Total Installed Power: 26 kW- Power Supply Voltage: 380 V- Frequency: 50 Hz- Machine Colors: RAL 6011 / RAL 2004- Control System: Siemens Simatic Panel / UniOP Panel- Included Equipment / Scope of Delivery: Hydraulic aggregate unit, standalone electrical control cabinet, control panel, material feed roller conveyor table

Condition: good (used), Year of construction: 2012, saw blade diameter: 250 mm, feed length X-axis: 250 mm, total length: 1,400 mm, total width: 1,200 mm, total height: 2,400 mm, rotational speed (min.): 1,400 rpm, rotational speed (max.): 5,360 rpm, overall weight: 450 kg, Equipment: rotational speed infinitely variable, High precision circular cutting machine for für Aluminium +/- 0,02 mm, full automatic, YOP 2012, blade Ø 250 mm, capacity Ø 3-65 mm, motor 2,5 KW, stroke 250 mm, SIEMENS Simatic HMI, high speed gear 1400 - 5360 rpm, oil/air lubrication, spezial jaws 2-30 mm for single/double clamping, roller conveyor 3 m adjustable, LED lamp, warning light, 10 blades, manual Fsdpfoyyl Hpex Akvspk

Condition: new, Year of construction: 2026, machine/vehicle number: K00630, functionality: fully functional, operating hours: 5 h, power: 2.2 kW (2.99 HP), input voltage: 400 V, input frequency: 50 Hz, cutting height (max.): 600 mm, cutting width (max.): 430 mm, control type: PLC-controlled, pivoting range: 45,060 °, total height: 2,250 mm, total length: 2,150 mm, total width: 4,000 mm, Equipment: CE marking, documentation/manual, When it comes to precise miter cuts, high production volumes, and economical manufacturing, the BAUER VG 450 L ZA-2 is the ideal solution. This fully automatic miter band saw combines the proven sawing technology of the VG 450 L with a powerful material feed system, enabling virtually operator-free sawing operation. Fpodpfx Akszqdv Isvok The integrated automatic material feed system independently transports the material to the sawing station and positions it precisely for each individual cut. At the same time, the machine automatically monitors the end of the material. The sawing process is completed reliably. A particular highlight is the ability to produce frame components with miter cuts fully automatically. Different cutting angles are executed precisely and with high repeatability, making the VG 450 L ZA-2 ideal for the production of windows, doors, facades, steel structures, and metalwork. Angle profiles, rectangular tubes, square tubes, round tubes, and solid materials can also be processed reliably and economically. The hydraulic miter adjustment allows for cutting angles from 45° left to 60° right, enabling numerous frame constructions to be produced without manual adjustments.