Condition: new, The work table made of heavily ribbed gray cast iron andguarantee the base made of welded steelTorsion resistance and vibration-free workingHigh quality machine at a real entry-level priceUnique in this performance class:- Format sliding carriage made of anodized aluminum for the highestcutting precision- Cutting plane directly on the saw blade- Swiveling saw blade unit from 90 - 45 °- Table bracket with aluminum crosscut fence and adjustableStop flap for plates and large workpieces- Rip fence with round bar guide and fine adjustment- Powerful engine- Made in EuropeDimensions and weightsWeight (net) approx. 170kgDust extraction connectionExtraction nozzle diameter 120mmExhaust nozzle diameter saw blade protection 60mmTransport width 680 mmWorking area 1600 mm x 2300 mmSpace requirement 2613.5 mm x 2134 mmPlease add the specified dimensions with the space required to obtain the recommended free space for the dimensions take into account maximum travels or usable lengthsElectrical data400 V supply voltageDrive motor 1.8 kWPhase (s) 3 PhNominal operating mode drive motor S6Current type ACDuty cycle drive motor 40%Mains frequency 50 HzSliding carriage and tableFormat sliding table 1140 mm x 200 mm x 70 mmTable 1024 mm x 224 mm x 900 mmsaw unitCutting width with rip fence 700 mmMax. Cutting height 90 ° 67mmMax. Cutting width to the left of the saw blade 1200 mmMax. Cutting height 45 ° 40mmEdging length 1200 mmSaw blade diameter 250mmSaw blade inclination 90 - 45 °Saw blade speed 3900min¯¹scope of deliverytable extensionAnodized aluminum sliding tableRip fence with round bar guide and fine adjustmentAluminum folding stopEccentricItem No. 5504113 Debu Tg Asvxr S Rjmekl

Condition: good (used), Year of construction: 2001, Circular saw Dksbu Tg Aerwly Uemel Manufacturer: SCM - Tecno Max Type: Formula S35 Year of construction: 2001 Carriage length: 3.200 mm Cutting width: 1,270 mm Cutting height: approx. 103 mm Saw blade diameter: Max. 350 mm Power: 5.5 kW Scorer: Yes Motor brake: Yes Speed: 4,000 rpm Weight: approx. 800 kg

Condition: new, Year of construction: 2023, cutting diameter 1600 mm saw band length 11000 mm cutting width 1,6 mm capacity 90 degrees: square 1600 X 1600 mm capacity 90 degrees: flat 1600 X 2500 mm total power requirement 11 kW weight of the machine ca. 19 t The pictures are only for orientation and illustration of the KSY model in a different size. Dobu Tjvn U Uasg Amokl

Condition: excellent (used), Functionality: fully functional, Omga V 113 P double miter saw for frames Double saw set at an angle of 45 degrees Diameter of saw blades 300 mm Diameter of saw hole 30 mm Two 1.1 kW engines Maximum cutting width 70 mm Maximum cutting height 75 mm Pneumatic material clamps Dkobuevn I Iao Tg Amsl

Condition: new, Year of construction: 2022, Functionality: fully functional, machine/vehicle number: 605.03.018.23, cutting height (max.): 133 mm, cutting width (max.): 1,250 mm, cutting length (max.): 3,200 mm, power: 7.3 kW (9.93 HP), saw blade diameter: 400 mm, height adjustment type: electric, cutting width at rip fence: 1,250 mm, type of input current: three-phase, motor voltage: 400 V, type of motor: electric motor, input voltage: 400 V, rotational speed (max.): 5,500 rpm, rotational speed (min.): 3,500 rpm, saw blade guard: 605 mm, warranty duration: 24 months, Equipment: motor brake, rotational speed infinitely variable, I am selling our Kappa 400 sliding table saw from Felder in Austria. The machine was delivered to us last year in March 2023. Dkobu Tgou S Ipae Amjl For operational and above all space reasons, the machine was never set up. We ordered the machine from Felder in the middle of 2022 with a few extras. I have photographed the invoice with the product details. As the machine is still in its original packaging, it is therefore available for immediate delivery or collection. The invoice after delivery amounted to EUR 17,378.00 net. The machine comes with two new saw blades.

Condition: refurbished (used), cutting length (max.): 3,100 mm, cutting height (max.): 70 mm, Product description: Panel dividing machine PA 4122 The PA 4122 is a high-performance and versatile panel dividing machine that was developed for the highest precision and efficiency in wood and panel processing. With a table length, stop depth and maximum cutting length of 3100 mm each, it is ideal for various applications. After a comprehensive overhaul by our qualified technicians, we also offer you a 1-year warranty. Special features: The PA 4122 is equipped with a modern control computer that enables seamless integration into your company network while maintaining the user-friendly user interface. Technical features: Cutting capacity: Table length: 3100 mm Stop depth: 3100 mm Maximum cutting length: 3100 mm Maximum cutting height: 70 mm (3-stage cutting height adjustment) Saw unit: Automatically running saw unit Continuously adjustable feed speed: 2–50 m/min Return speed: 70 m/min Controlled retraction for precise cuts Scoring saw adjustable from the outside Material handling: Air cushion tables for effortless movement of the workpieces Closed pertinax plates for smaller workpieces up to 2400 mm, otherwise roller conveyors Semi-automatic angle clamping device up to 2400 mm Slider: Parallel stop with 6 clamping fingers, driven by servo motor Feed speed: up to 25 m/min Dksbu Tjvxid Dsg Amsl Return speed: up to 40 m/min Integrated residual cutting device Safety: Protective hood lock and dust-tested slatted protective curtain Integrated extraction channels CE compliant Control and operation: 15-inch flat screen in the swiveling control panel with keyboard and mouse Modern Linux Ubuntu operating system Graphical representation of the cutting plans in the operating program Connectivity: Network capable (compatible with Windows, Linux, Mac and Novell) Remote maintenance and updates possible Optimization and labeling (optional): Optimization of the cutting plans in the office (with OPTIMAX) or directly on the machine (Optimin) Freely adjustable labels and label printing during sawing The PA 4122 combines the latest technology with proven performance and is therefore the ideal solution for demanding panel processing.

Condition: used, Year of construction: 1989, with electrical height and swivel adjustment   used, great condition Panhans make Type 688 Year of manufacture 1989 Machine no. 287 GS-approved Motor 5.5 kW brake Cutting width approx. 1250 mm Cutting length approx. 2700 mm swiveling up to 45 ° Scoring unit Parallelogram protection Electric height adjustment Electric swivel adjustment Angle stop as a miter stop Extraction connection D 120 mm / 80 mm Required space approx. 2800 mm x 3400 mm x 1400 mm Djbu Tgevxr Sqs Amokl Weight approx. 1000 kg Storage location 97447 Gerolzhofen, free on truck, unpacked Handover in the current condition as viewed, without overhaul, without guarantee and warranty

Condition: new, Year of construction: 2025, The innovative circular saw is a combination of a powerful, precise, universal and compact device. It was created for small carpentry workshops, furniture manufacturers and craftsmen. This machine uses many solutions usually used in more expensive devices of this type. The excellent price-performance ratio has been achieved without compromising on quality or versatility. Machine description The TS 315 industrial circular saw for solid wood is an innovative combination of a powerful, precise, universal and compact machine! It was created for carpentry workshops, hobbyists, furniture manufacturers and craftsmen This machine uses many solutions used in much more expensive machines of this type! Excellent price-performance ratio has been achieved without compromising on quality or versatility! The machine is also used to process high-density boards, MDF boards, ABS panels, PVC, solid wood and other materials based on wood or with a similar structure and hardness. Smooth and precise adjustment of height and angle using a knob Stable, heavy, high-quality machine body. Broadening and extending the table allows for comfortable work. Smooth aluminum reinforced sliding table. Precision parallel stop with fine adjustment. Sturdy telescopic arm and extendable extension table Large drive motor guarantees consistent cutting speed, even at a cutting height of 100 mm Technical parameters Dsbu Tgovxhm Do Amskl Shield dimensions 315x30x3.2mm Dial rotation 4250rpm Max. cutting height 90/45 degrees 100/75mm Max. cutting width on the guide 940mm Workbench dimensions 800 x 365mm Table extension 760 x 600mm Expanding the table 500 x 350mm Sliding table 1600 x 238mm Suction port diameter 100mm Motor power 2.8kW Supply voltage 400V Weight 245 kg Machine dimensions 1540 x 2400 x 1300mm

Condition: used, Year of construction: 2002, SECOND-HAND RADIAL ARM SAW OMGA MOD. RN700 - CE RULES - Kw 2.9 Dkjbuorm Stqj Tg Amol - Blade d. 300 mm. - Volt. 400/50 - Year 2002

Condition: like new (used), Functionality: fully functional, AUTOMATIC DOUBLE MITRE SAW model OMS SALVARANI S 350 second hand machine in Excellent working condition Dksbjt I T S Hou Tg Amel for cutting wood, frames, pvc, aluminium, plastics and various materials CE compliant machine: YES oil pneumatic downstroke of the blade groups inclination of cutting blade groups + / - 45° bimanual control from the control panel digital display on length measurement n.02 vertical pressers n.02 horizontal pressers n.02 motors . power Hp 3 each one blades diam. mm. 350 max. useful cutting length mm.3030 min. useful cutting length (90°) mm.200 min. useful cutting length (45°) mm.410 max. useful cutting width 90° mm. 150 x 105 H max. useful cutting width 45° mm. 105 x 105 H volt. 380/50 weigth kgs. 650

Condition: good (used), Year of construction: 2019, Prinz TWIN-L PROFICUT light Power: 7.5kW Motor: electric Standard package size (width x height x length): 130x130x620cm Cut feed: manual Weight of the saw (with a cutting device of 200cm): approx. 170kg For an extra price there is a choice of adding several extra parts: Dsbu Tg Aeu I Ucnomskl 2 pieces of guide bars (new) 4 pieces of chain (barely used) 4 pieces of chain (used) Chain sharpening machine JOLLY: (used) Dismantled, ready for shipping.

Condition: excellent (used), Year of construction: 2017, Functionality: fully functional, - with storage system BARGSTEDT TLF 411/19/09 Profiline, year of manufacture: 2014 - Cutting length: 4300mm Dksbusvxalls Tg Amol - Main saw: 11kW - Scoring unit: 2.2kW

Condition: new, Basic equipment and accessories10-year guarantee on the guide system of the saw carriage- Saw carriage with anodized aluminum profile guide made of hardened,ground and flanged steel guides- Saw carriage length 3200mm- "READY" electronic control, 2-axis control (3rd axis onrequest) with:- Height adjustment and inclination of the saw unit (control of therip fence on request)- Management of the tool data with automatic correction of theCutting height in relation to the angle of inclination of the saw blade- Manual, semi-automatic and automatic mode with 99storable work programs- Additional functions: calculator and hour meter- Trimming frame for quick positioning of the stopmiter cuts- Table extensions in the outlet- Cutting length at the rip fence 1270 mm- 2-axis control with 99 programsMotor 7kW 50Hz (8kW 60Hz)- Motor with direct connection with push buttons- Three main saw blade speeds- Scoring unit with independent motorization, externally adjustable andStops for easy saw blade positioningSecurity/Protection- Emergency stop button on the front- Emergency stop button on the side near the rip fence (Version CE)- Thermal protection switch- Saw blade swing protection (version CE) integrated suction, suction nozzlewith a diameter of 80 mm- Saw blade swing protection with integrated suction, suction nozzle with 80 mmdiameter- Automatic motor brake on the main saw blade (CE version)- Lockable main switch- 110 V auxiliary circuit- CE Declaration of Conformity (CE version)Technical specificationsMax cutting height at 90° (mm) 140 with blade 400Max cutting height at 45° (mm) 97 with blade 400Saw blade tilt (degrees) 45Programmed lifting and swiveling of the saw blade unitSaw blade speed (rpm) 3000- 4000- 5000Scorer speed (rpm) 8500Main engine power (S6 -40%) kW (hp) 50 Hz 7 (9.5)Scoring unit power (S6 -40%) kW (HP) 50 Hz 1.3 (1.7)Format cuts:- with trolley 1600 (mm) n.a.- with trolley 3200 (mm) 3200x3200Cutting width for parallel cuts (mm) 1270Suction nozzle diameter:- on frame (mm) 120- on the saw blade guard (mm) 80- on the riving knife (mm) n.a.Net weight base machine (kg) 1050109999 Execution according to safety regulationsR10078 nova si 400ep CE version930731 volts 400 EU931201 Frequency 50 Hz570343 Digital readout for rip fenceComplete with:- Digital display and magnetic tape570133 Motor 9kW 50Hz (11kW 60Hz) with automatic star/delta switch kW9 HP12 Hz50 (kW11 HP15 Hz60)083202 base109993 MACHINE LANGUAGE: German Dsbusvxr Skj Tg Amjkl

Condition: new, Year of construction: 2025, This machine is a powerful, precise and universal device in a compact body, created for all workshops, furniture manufacturers and carpenters looking for a powerful machine. This model features many solutions implemented in more expensive models. Fantastic value has been achieved without any compromises when it comes to its quality and universality. Precise saw cutting and height adjustment through a knob Parallel guide with microadjustment Table ground, made of cast iron with expansion capability Stable, uniform table saw design, intended for any carpentry work Integrated side table provides great cutting capabilities Technical data Maximum saw diameter 254 mm Saw speed 4000 rpm Saw tilt range 90–45° 45º maximum cutting depth 50 mm 90º maximum cutting depth 80 mm Dkebsvxhlgju Tg Amsl Worktable dimensions 350×800 mm Movable table dimensions 240×1320 mm S1 continuous work motor power 2.2 kW Power supply 400V Weight 180 kg Dimensions 1550×1900×820 mm

Condition: excellent (used), Year of construction: 1990, Functionality: fully functional, Artiglio ST130 log band saw Year of production: 1990 Technical condition: very good, machine after a thorough service. Dobusvxadus Tg Amekl Technical data: - maximum log length: 6m - maximum log diameter: 120cm - main engine: 55 kW The set is visible in the photos. The set includes 12 saws. For an additional fee, the machine can be installed and started up. We also provide service support.

Condition: good (used), Year of construction: 2020, Functionality: fully functional, Selling panel saw Winter A45 - 3200, year of manufacture 2020 CNC Deluxe, very good condition Dsbu Tgevw Tr Ns Amjkl

Condition: new, We manufacture impregnation systems according to your wishes Image is an example Dsbu Tg Aovw S Ipomjkl We would be happy to make you an offer

Condition: used, machine/vehicle number: G-KR131482R, Elektra Beckum PKU250 circular saw, good condition, year of manufacture 2004, standard equipment, 2.7 kW S6, 83 mm cutting height, 1800 mm format table length, 800 mm table length, 800 mm table width, approx. 75 kg Dkobu Tgevw Eddo Amjl Prices subject to change, errors, printing and typesetting errors reserved

Condition: new, - new -Description:- Saw blade tilt and height adjustment is manual- Max. Cutting height 200mm- Scoring device with separate drive motor- Main saw blade with belt drive and speeds 2800/3665/4800 min¯¹- High dead weight ensures vibration-free running- Large cantilever table with material roller- Rip fence with round bar guide- Extendable aluminum longitudinal fence with two folding stops- 7,5 kW main motor mounted on robust cast iron frame- Quadruple bearing format sliding carriage with double roller carriage made of anodized aluminum with high torsional rigidity- Multiple locking device on sliding table- Standard with table widening and table extension made of sheet steel- Large pendulum protection hood conveniently swivels up with the help of a gas pressure spring- Saw blade clamping via tool-free Rapid systemTechnical data:Dimensions and weightsLength approx. 3386 mmHeight approx. 1330 mmWidth/Depth approx. 3703 mmWeight approx. 1102 kgConnection suctionSuction port diameter 120 mmSuction port diameter saw blade guard 80 mmElectrical dataSupply voltage 400 VInput power 8,3 kWMotor speed 2800 min¯¹Mains frequency 50 HzOutput power 7,5 kWSliding carriage and tableFormat sliding carriage length 3200 mmFormat sliding carriage height 890 mmTable width 685 mmFormat sliding carriage width 416 mmTable length 1255 mmTable height 890 mmNoise emissionSound pressure level 96,5 dB(A)Circular saw unitCutting width with rip fence 1450 mmSaw blade inclination 90 - 45°Max. Cutting height 45°140 mmSpeed of saw blade 2800/3665/4800 min¯¹[Max. Cutting width to the left of the saw blade 3200 mmMax. Cutting height 90° 200 mmDiameter saw blade 550 mmScoring unitDiameter scoring saw blade 120 - 130 mmSpeed scoring saw blade 8000 min¯¹Item no.: 5200550 Dobusvxr Rge Tg Amskl

Condition: new, Year of construction: 2025, Table saw with right-sided table expansion, straight and angled fences. Machine features This machine is a powerful, precise and universal device in a compact body, created for small workshops, furniture manufacturers and carpenters. This model features many solutions implemented in more expensive models. Fantastic value has been achieved without any compromises when it comes to its quality and universality. Technical data Maximum saw/hole diameter 254×30 mm Saw speed 4000 rpm Saw tilt range 90–45° 45º maximum cutting depth 65 mm 90º maximum cutting depth 80 mm Cutting width with expanded table 750 mm Extraction connector 100/25 mm Worktable dimensions 635×420 mm Dkebu Tg Aovxhkijmel Expanded worktable dimensions 635×1500mm Motor power 2.2 kW (S1) 230V / 3.1 kW (S6) Weight 110 kg Dimensions 1450×1000×1100 mm Manufacturer: Cormak

Condition: used, cutting width max. 610 mm Cutting height max. 150 mm Saw blade diameter 600 mm Motor output 9,2 kW turning speeds 2750 U/min Required air-pressure 7 bar work height max. 900 +- 20 mm Dimensions (L/W/H) 770x1385x1370 mm SALVAMAC Legend 600 the semi-automatic chop saw ----- - Maximum cutting area 420x150/520x100/610x30 mm (When sawing stacked boards, note: rear stop height 100 mm) The structure is made entirely of sturdy, thick-walled steel, which is painted throughout and reinforced. A solid one Floor mounting system is equipped with flanged steel feet, to ensure secure attachment. The two-hand control is ergonomically positioned for comfort and efficient operation. Engine power of the saw motor 9.2 kW. The cutting speed is adjustable via a pneumatic controller, to enable precise adjustment. The system also has a Shock-absorbing system to minimize vibrations and ensure worker safety to improve. HM circular saw blade, diameter 600 mm, Z=132. The upper pressure hood has an electro-pneumatic control for precise operation. The pressure hood movement system is innovative Ball bearings operated with double dust protection and automatic lubrication system, which ensures smooth functionality. In addition, the electrical system is compliant with CE standards. CE models are standard with at least 1 meter long inlets and outlets (undriven rollers or flat table) to facilitate operation optimize and meet security standards. Technical data: ----- Saw cross section: 420x150/520x100/610x30 mm Saw blade motor power: 9.2 kW Saw blade diameter: 600 mm Saw blade type: HM Z=132 Saw blade rotation speed: 2750 rpm Air consumption per cycle: 7 Nl Intake nozzle: 2 x 140 mm Air pressure: 6 - 8 bar Voltage: V 400/50 Hz 3 phase Worktop height: 900 mm +- 20 mm Color: Ral 7035 Debsvnv U Uou Tg Amjkl ----- Total price ex works: on request! ----- Options like: - Inlet/outlet with undriven rollers/flat table - Mechanical or pneumatic stops - Electronic length stop / slider Salvastop (Combo series) - Movable front protection and more on request! ----- (technical data according to the manufacturer without guarantee!)

Condition: used, Year of construction: 1994, with Supergehrfixangle mitre fenceused, good conditionmake Panhanstype 690year of construction 1994machineNo. 1286GS wood dust testedmotor 5.5 kWsteel guidescarriage length approx. 3200 mmcutting width approx. 1250 mmswivel up to 45°scoring unitparallelogram protectiontable top extensionhydraulic height adjustmenthydraulic swivel adjustmentdigital display:- cutting angleangle stop as mitre fence with length compensation / super mitre fixsuction connection D 120/80 mmspace requirement approx. 3200 mm x 3700 mm x 1700 mmWeight approx. 1000 kgTotal connected load approx. kWStorage location 97447 Gerolzhofen, free loadingHandover as is, as inspectedwithout guarantee and warranty Debu Tevxr Npog Amokl

Condition: new, Year of construction: 2025, Table saw with right-sided table expansion, straight and angled fences. Machine features This machine is a powerful, precise and universal device in a compact body, created for small workshops, furniture manufacturers and carpenters. This model features many solutions implemented in more expensive models. Fantastic value has been achieved without any compromises when it comes to its quality and universality. Technical data Maximum saw/hole diameter 254×30 mm Saw speed 4000 rpm Saw tilt range 90–45° 45º maximum cutting depth 65 mm Dkebu Tsvxhi Eeg Amsl 90º maximum cutting depth 80 mm Cutting width with expanded table 750 mm Extraction connector 100/25 mm Worktable dimensions 635×420 mm Expanded worktable dimensions 635×1500mm Motor power 2.2 kW (S1) 400V / 3.1 kW (S6) Weight 110 kg Dimensions 1450×1000×1100 mm Manufacturer: Cormak

Condition: used, Cleaned, function checked, test run 4 x sanding pad: - 2 x surfaces 25 mm - 1 x convex approx. 20 mm - 1 x convex approx. 30 mm   second hand Make Braun Type BP 700 Working width 700 mm Swiveling table Djbsvw Dxgsu Tg Amekl Grinding height 190 mm Required space approx. LxWxH mm 1400 x 700 x 1700 Storage location 97447 Gerolzhofen Delivery in the current condition as seen - free on truck -

Condition: new, Year of construction: 2025, Table saw with right-sided table expansion, straight and angled fences. Machine features Dkebu Tovxhhbsg Amsl This machine is a powerful, precise and universal device in a compact body, created for small workshops, furniture manufacturers and carpenters. This model features many solutions implemented in more expensive models. Fantastic value has been achieved without any compromises when it comes to its quality and universality. Technical data Maximum saw/hole diameter 254 mm Saw speed 4000 rpm Saw tilt range 90–45° 45º maximum cutting depth 56 mm 90º maximum cutting depth 80 mm Movable table travel 620 mm Cutting width on the right side of the saw 610 mm Table height 890 mm Motor power 2.2 kW (S1) / 3.1 kW (S6) Power supply 400V Weight 125 kg Dimensions 1090×1330×910 mm Manufacturer: Cormak