Year of construction: 2025, Condition: new, Functionality: fully functional, new mobile package cross-cut saw Holtec Piccolo ideal for start / end and cross-cuts on timber packages chain set with STIHL chain type Rapid Super 0.404" for extremely fine surfaces and stellited guide rails on both sides (four-way reversible) 5.5 kW electric motor High cutting performance for bundles up to 1.10 m x 1.10 m and log diameters up to 1.30 m blade length: 1.60 m Dksbvdsh Imuvedrbsl 400V, 50 Hz 1 year guarantee immediately available from stock

Year of construction: 2003, Condition: reconditioned (used), longitudinal saw for cutting boards 4 meters main engine 400V, 7.5kW Dksbehbp T Sovddrbol - blade feed motor 400V, 2.2 kW - extending the pneumatic saw - working pressure 6bar - cutting length 4020 mm - cutting height approx. 170mm - machine length 5.5 m - machine width 1.6 m

Condition: reconditioned (used), Year of construction: 2007, Functionality: fully functional, cutting length (max.): 4,250 mm, cutting height (max.): 120 mm, cutting width (max.): 4,100 mm, main saw diameter: 460 mm, power: 21 kW (28.55 HP), Machine type: fh6 430-410 / HT220 / MCS-Evolution / Win 10 Cutting length: 4,250 mm Cutting width: 4,100 mm Year of construction: 2007 Saw blade projection max .: 135 mm Saw blade diameter max .: 460 mm Main saw motor: 21 kW Scorer aggregate Scorer saw blade diameter max .: 200 mm Package height max .: 120 mm Package height min .: 3 mm Saw aggregate forward: 6 up to 150 m / min Saw aggregate backward: up to 150 m / min Feeder: up to 80 m / min (Europe: forward 25 m/min acc. EN 1870-13) Number of clamps: 7 pcs grip push clamp Clamp opening: 125 mm Strip aligner before and after the pressure beam Air cushion tables: 3 pcs. (2100 x 700 mm) Machine table: Djbvdolni T Eedrbjkl heavy-duty steel construction „Closed Frame Construction“ machine table surface is precision machined Automatic cutting length adjustment Scissor lift table: - Panel width: 2200 mm - Platform - Hydraulic unit - Max. Load: 6,0 tons - Push-off trolley - Rack and pinion drive - Frequency converter driven - Drive shaft - Push-off device: - Quantity: 2 pc(s) - For panel thicknesses ≥ 6 mm - Probe spindle for automatic package height adjustment - Floating - Cross alignment stop at the roller table - length: 1450 mm, measured from the saw line - solid box-type steel welded construction - alignment stop surface is precision machined - Book aligning device for longitudinal board edges - Quantity: 2 pc(s) - For pusher infeed - Raise- and lowerable aligning dog - Pneumatic operation - Counterholder: - Quantity: 2 pc(s) - For board thicknesses ≥ 6 mm This machine is in very good conditions and works very well. The machine is reconditioned, checked and tested in our company. Errors and alterations in the technical datas and informations excepted! (displayed photos are symbol photos)

Condition: good (used), Year of construction: 1999, cutting length (max.): 4,200 mm, cutting height (max.): 115 mm, Panel saw with lifting table loading Manufacturer Scheer Type PA 7004 horizontal panel dividing saw with automatic lifting table loading with cutting optimization software in 11.2020 new PC with DNC-AT control, operating system Linux with PA software S5 Cutting length 4200 mm Travel path of the material pusher 4250 mm Cutting height 115 mm Maximum saw blade projection 135 mm Panel saw size FM22 Main saw blade maximum diameter 450 mm Scoring saw blade maximum diameter 200 mm Saw blade bore 30 mm Feed speed of the saw 0-100 m/min. Return speed of the saw 100 m/min. Number of collets 7 pieces Feed speed of the material pusher in the forward direction 30 m/min, in the return direction 70 m/min. Remaining section device SP5004 Saw motor 11 kW, scoring unit 2.2 kW Saw feed motor 1.1 kW, table feed motor 1.63 kW Lifting table motor 4 kW, drive motor for roller conveyor 0.37 kW Total power 20.4 kW Front air cushion support tables 3 pieces Width of the tables 800 mm, length 2000 mm Dksbvddrjvyyn Nebol Compressed air maximum 6 bar, limit pressure 7 bar Compressed air hose diameter 10 mm Air consumption approx. 15 liters per cycle Angle pressing device WP 5033 Lifting table device with driven roller conveyor Dimensions 1700 mm x 4700 mm 3 x suction connection diameter 120 mm Documentation available Declaration of conformity available

Condition: new, The Altendorf F 25 offers everything a panel saw needs to be able to do in a small space. And all in uncompromising Altendorf quality. A machine for beginners and professionals alike. Basic equipment: - Manual height and swivel adjustment 0 - 46° of the saw blade, with digital display - Drive power 4 kW (5.5 HP) with one speed, 4200 rpm. - Double trolley, trolley length 3200 mm - Angle miter stop, cutting to length up to 3450 mm - Braking device, illuminated button - Saw blade diameter max. 315 mm, - Saw blade projection max. 104 mm - Cutting height 100 mm, 70 mm at 45° - Machine height 88 cm Package 2 includes: - 5.5 kW (7.5 HP), 2 speeds - Parallel stop, 1410 mm* - Large extraction hood (PSV) Djbvddrevyur Nebjkl - Basic scoring saw with LED lighting

Condition: excellent (used), Year of construction: 2021, Functionality: fully functional, cutting height (max.): 200 mm, cutting width (max.): 1,250 mm, saw blade diameter: 500 mm, length stop: 3,200 mm, worktable length: 3,700 mm, TECHNICAL DETAILS Djbvevyqu Hsddrbjkl Engine power: 13.59 HP / 10.0 kW Max. cutting height: 200 mm Max. cutting width: 1,250 mm Crosscut stop: 3,200 mm Format sliding table: 3,700 mm Max. circular saw blade diameter: 250 - 500 mm Circular saw table extension: up to 1,620 mm EQUIPMENT - Parallel stop: Yes, with digital display - LASER cutting line display: available - On and off switch: on the sliding table - Preventive Contact System (PCS®): available - Potential-free contact: for controlling extraction systems

Year of construction: 2025, Condition: new, Functionality: fully functional, 1 new mobile Holtec KAPPSTAR HF122 package crosscut saw robust all-rounder for sawn timber and logs for start / end and cross-cuts Package cross-sections up to 1.30 m x 1.30 m Log diameter up to 1.60 m Electric motor 11 KW STIHL pointed tooth chain for cross-cutting sawn timber or with STIHL planer tooth chain for cross-cutting logs Stellite guide bar on both sides (four-way reversible) Dkobeh Imu Devddrbel Bar length: 1.90 m 400V, 50 Hz 1 year guarantee

Condition: ready for operation (used), Year of construction: 1990, operating hours: 4,452 h, Functionality: fully functional, cutting height (max.): 120 mm, main saw diameter: 380 mm, type of motor: three-phase motor, cutting depth: 340 mm, Raimann KR 310 E 340/120 multi-saw with movable disc - manufactured in Germany - year of manufacture 1990 - DTR Debjrhig Ejvddrbekl - number of hours 4452 h TECHNICAL PARAMETERS: - track width 340 mm - cutting height max 120 mm - cutting height with movable disc 85 mm - engine power 30 kW - minimum length of the element 700 mm - width of table 740 mm - feed regulated on inverter 6-48 m/min - three rows of pawls - possibility to mount a bush - sleeve diameter 80 mm - length of fixed sleeve 190 mm - electrical adjustment of cutting height - electrical adjustment of shaft height - four top pressure rollers - automatic central lubrication - laser - ruler - spigot diameter 250 mm Overall dimensions of the machine 250x200x220 cm weight 2000 kg

Condition: new, Year of construction: 2023, Functionality: fully functional, Equipment features: - Sliding carriage made of anodized aluminium, incl. high-precision guide made of hardened and ground steel - Sliding carriage lock in any position Dkebvdderrw Ucsrbsl - Saw blade guard with swing-away device - Extension arm with adjustable angle stop with length compensation every 5° and at 22.5° - Mitre fence and eccentric clamp - Belt adjustment for speed change from above (opening in the saw table) - Indicator lights for set saw blade speed - 3-axis programming unit via TFT 15'' touchscreen on Windows basis, incl. 2,500 program slots, 2 USB ports and 1 Ethernet network connector - Scoring unit with electromotive height adjustment and motorized axial pulse adjustment, including digital display for height and width and width - Angle stop with 3 stop riders; 2 riders with digital display, 1 rider analog but coupled to a digital rider also digitally adjustable - Upper control panel incl. automatic star-delta start - Electrics and safety devices according to CE standard Technical data: - Saw blade inclination: 0° to 45 - Table dimensions: 1,030 x 680 mm - Working height: 870 mm - Sliding carriage dimensions: 3,200 x 400 mm - Cutting length with scoring unit: 3,420 mm - Cutting width at rip fence: 1,300 mm - Max. Cutting height with 500 mm saw blade: 90°: 177 mm / 45°: 133 mm - 3 speeds: 3,000 / 3,600 / 4,200 rpm. - Motors: Main saw: 7.5 kW / 10 HP / 50 Hz, scoring saw: 0.55 kW / 0.75 HP - Noise level according to EN 27960: 84.4 - 2565086.3 dB(A) - Extraction nozzle 1 x 120 mm, 1 x 100 mm - Angle fence extendable to 3,400 mm

Condition: ready for operation (used), Year of construction: 1986, Panhans band saw BSB 900 Roll diameter 900 mm Motor power 5.5 kW with motor brake Speed 610 rpm Cutting height 590 mm Cutting width 880 mm Debveipyguoddrbjkl Belt length 6200 mm Table dimensions 840 x 1280 mm, swivels approx. 20° APA saw blade guide at the top and bottom Weight 880 kg Dimensions 1700 x 900 x 2700 mm Condition tested for functionality Year of manufacture 1986

Condition: new, -New-CE version- The WA 6 is the smallest Altendorf sliding table saw,that exist.- Despite its smaller dimensions, it impressesgreat achievements.- She trumps herself with her strong equipmentbig in the smallest space.- The cutting quality and flexibility are outstandingin daily hnical specifications:Double trolley length 2000 mmMotor 4 kW, speed 4200 ring unit 0.37 kWCutting height max. 100 mm, at 45° max. 72 mmmanual height and swivel adjustment 0-45°Cutting width 1000 mm, manually adjustableCut to length on the miter stopup to 2600mmSuction connection top/bottom 50/100 mmWorking height 910 mmWeight from 450 kg Dksbvddsvyurperbel

Condition: excellent (used), Year of construction: 2008, cutting length (max.): 4,500 mm, saw blade diameter: 380 mm, cutting depth: 4,300 mm, total length: 5,400 mm, total width: 7,000 mm, Used GABBIANI Galaxy 105 panel sizing machine Dkobvddsvyl Dijrbel - Year of manufacture 2008 - Available from July 2025 - Cutting length 4,500 x 4,300 mm - Label printer

Condition: like new (used), Year of construction: 2018, Machine in very good condition Dksbvdou Hhmksdrbel

Condition: used, roll diameter / mm Dsbveikggdoddrbjkl throat / mm workpiece height / mm With saw blade welder Mod: BSO Tape width: 16mm Volts: 360 Hz: 50-60 Amp: 5.2 . 91622F Saw blade length max.: 4250mm Saw blade length min.: 4150mm Table dimension: 600x600mm Max working length: 1120mm

Condition: new, Year of construction: 2023, Functionality: fully functional, Exhibition machine at a special price Technical data: - Cutting length: 3,200 mm - Material pusher run: 3,300 mm - Max. Cutting height: 72 mm - Saw blade: Diameter: 350 mm, bore 30 mm - Scoring saw blade: Diameter: 150 mm, bore 20 mm - Saw blade speed: 4,000 rpm - Motor: 7.5 kW (= 10 HP) Dobvddrorrwi Sebekl - Rotation of scoring saw blade: 8,000 rpm. - Motor: 0.75 kW (= 1 HP) - Feed speed of saw unit: 1 - 40 m/min. (back: 40 m/min.) - Feed speed material pusher: 1 - 24 m/min - Required air pressure: 6 bar - Suction nozzles: 2 x 100 mm, 1 x 120 mm - Electronic pusher with 6 clamps - 1 set of HM saw blades (main saw blade and scoring saw blade) - Scoring adjustment outside the protective hood - 3 phenolic-covered air cushion sliding tables 2000 x 600 mm (1 fixed table, 2 movable tables) - Rear roller support (inside the machine) - controlled side aligner 1.250mm run - Saw carriage drive via rack and pinion - CE-equipment Control panel, incl: - Industrial PC with Windows operating system - 15'' color display - USB port for transferring programs and parameters - Graphic display of the saw cuts

Condition: new, - NEW-descriptionCutting plane directly on the saw bladeHeavy steel and cast iron constructionPrecision-guided format sliding carriage made of aluminium,anodized as standardLarge-area table extension guided on a telescopic arm andlongitudinally adjustableExtendable aluminum telescopic fence, angle adjustable with professionalstop flapsRip fence with quick release and fine adjustmentLarge work table made of milled gray cast iron stays permanently flatThe standard table extension and table extension enable easy work with larger workpiecesQuiet running and precise cutsEquipped with a powerful three-phase motorThe large dimensioned cast iron sawing unit is attached twice to the cast iron table and guarantees stability, precision, smooth running and a long service lifeMaximum cutting height is also achieved with the built-in scoring deviceEquipment details:Double cradle saw unitGenerously dimensioned, made of steel/cast ironClose to the saw blade, supported on both sides for precision, smooth running and a long service lifeAdjustable in height and up to 45° with a crankMaximum cutting height is also achieved with the built-in scoring deviceAlso available with scoring unittelescopic stopExtendable telescopic stop up to max. 2550 mmAngle adjustableWith professional stop flapsAluminum sliding carriageWith a thousand times proven ball contact systemInsensitive to dust and dirt due to minimal contact point between ball and trapezoidal rail10-year Holzkraft guarantee on wear and tear on the guidewaysRip fence with round rod guideWith fine adjustment and quick releaseStable round rod guide made of ground steel with a diameter of 45 mmCan be folded down as standard for cutting large workpiecesTechnical specifications:Dimensions and weightsWeight (net) approx. 380 kgConnection suctionSuction connection diameter 120 mmSuction connection diameter saw blade protection 60 mmMachine body length 1388 mmWorking area length 1000 mmMachine body width/depth 689 mmWorking area width/depth 2000 mmSpace required length 5118 mmSpace requirement width/depth 3830 mmelectrical dataConnection voltage 400 VDrive motor power 5.0 kWPhase(s) 3 PhNominal operating mode drive motor S6Type of current ACDuty cycle drive motor 40%Mains frequency 50 HzSliding carriage and tableFormat slide length 2250 mmTable length 840 mmFormat sliding carriage width 270 mmTable width 560 mmFormat sliding carriage height 124 mmTable height 900 mmcircular saw unitCutting width with rip fence 900 mmMax. cutting height 90° 90 mmMax. cutting width to the left of the saw blade 2310 mmMax. cutting height 45° 63 mmtrimming length 2250 mmSaw blade diameter 315 mmSaw blade inclination 90 - 45°Saw blade speed 4000 rpmArt. No. 5504323Ausziehbarer Teleskop-fence to max. 2550 mmWinkeladjustableMit Profi-AnschlagklappenAluminium-sliding tableMit tausendfach bewährtem KugelkontaktsystemStaub- and schmutzunempfindlich durch minimalen Berührungspunkt zwischen Kugel and Trapezschiene10 Jahright hand Holzkraft-guarantee on abrasion der Führungsbahnenrip fence with round rod guidingMit fine adjustment and quick clampingStabile round rod guiding aus geschliffenem steel with 45 mm diameterSerienmäßig tiltable for den Zuschnitt großer WerkstückeTechnische Daten:dimensions and Gewichteweight (Netto) ca.   380 kgAnschluss Absaugungsuction nozzle diameter   120 mmsuction nozzle diameter Sägeblattschutz   60 mmAufstellinformationenTransportbreite   900 mmErläuterung required spaceDie d... Debvovyuqfjddrbskl

Condition: good (used), Year of construction: 1999, SCM M 2 multi-spool machine in good standard Debvddju Hhb Ujrbskl

Condition: used, roll diameter / mm Dkjbvdsuddmrjdrbjl throat / mm workpiece height / mm Table dimensions: 615x615mm

Condition: new, - NEW -- Cutting plane directly on the saw blade- Large dimensioned cast iron saw unit double on the cast iron tablefastened - guarantee for stability, precision, smooth running and long service life- Precision-guided format sliding carriage made of aluminium, standardanodized- 10-year HOLZKRAFT guarantee on wear and tear on the guideways of thesliding carriage- Rip fence with round rod guide and fine adjustment as standard- Large work table made of milled gray cast iron- Quiet running and precise cuts- Enable standard table widening and table extensioneasy work with larger workpieces- Extendable aluminum telescopic fence with angle adjustment andtwo professional folding stops-Made in ItalyTECHNICAL SPECIFICATIONSDimensions and weightsWeight (net) approx. 295 kgConnection suctionSuction connection diameter 120 mmSuction connection diameter saw blade protection 60 mminstallation informationTransport width 700 mmMachine body length 802 mmMachine body width/depth 615 mmSpace required length 3860 mmSpace requirement width/depth 2750 mmExplanation of space requirementsThe dimensions take into account maximum travel distances or usable lengthsWorking area length 1000 mmWorking area width/depth 2000 mmExplanation of work areaPlease add the specified dimensions to the space required to calculate theto obtain the recommended free installation space for the ctrical dataConnection voltage 400 VMains frequency 50 HzDrive motor power 4.0 kWRated operating mode drive motor S 6Duty cycle drive motor 40%Sliding carriage and tableFormat slide length 1600 mmFormat sliding carriage width 270 mmFormat sliding carriage height 124 mmTable length 1020 mmTable width 325 mmTable height 860 mmcircular saw unitCutting width with rip fence 900 mmMax. cutting width to the left of the saw blade 1660 mmtrimming length 1600 mmSaw blade inclination 90 - 45°Max. cutting height 90° 100 mmMax. cutting height 45° 79 mmSaw blade diameter 315 mmSaw blade speed 4000 rpmFURNISHINGAnodized aluminum format sliding carriageHandle for sliding carriagetrimming frameSaw rip fence with round rod guideStops Two professional folding stopstrimming shoeeccentric clamptable extensiontable extensionsaw blade guard&nbsp, Dobsvyup Ujvddrbjkl

Year of construction: 1982, Condition: used, roll diameter / mm throat / mm workpiece height / mm table-size 600 x 600 mm weight of the machine ca. ca. 650 kg Technical specifications: Roll diameter approx. 420mm Projection in width approx. 415mm Projection in height approx. 265mm Table size approx. 605 x 600 mm Belt speed 18 - 562 m/min. 8 levels Saw band length min./max. 3150 / 3260mm - Saw band speed over 4 gear stages and 2 engine speeds - Saw blade butt welder IDEAL BS 0-16 with scissors and whetstone - swiveling work table in 2 axes Dsbvddoi E Ahdjrbekl Dimensions: approx. L x W x H 950 mm x 750 mm x 1900 mm Weight 600kg with table feed Description has been adopted.

Condition: new, - New-- Cutting plane directly on the sliding carriage- Heavy steel and cast iron construction- Precision-guided format sliding carriagemade of aluminium, anodised as standard- Large table extension on telescopic armguided and longitudinally displaceable- Extendable aluminum telescopic stop,angle-adjustable with professional stop flaps- Rip fence with quick release and fine adjustment- Large work table made of milled gray cast ironremains permanently plan- The standard table extension and table extensionextension make it easy to work with larger onesworkpieces- Quiet running and precise cuts- Equipped with a powerful three-phase motor- The large dimensioned saw aggregateGray iron is doubly fixed to the cast iron table and isa guarantee for stability, precision, smooth running andlong lifetime- Maximum cutting height is also when installedscoring device reachedMade in ItalyEquipment details:Double cradle saw unit- Oversized, made of steel/cast iron- Close to the saw blade, supported on both sidesfor precision, smooth running and a long service life- Adjustable in height and up to 45° using a crank- Maximum cutting height is also when installedscoring device reached- Also available with scoring unittelescopic stop- Extendable telescopic stop up to max. 2550 mm- Angle adjustable- With professional stop flapsAluminum sliding carriage- With a thousand times proven ball contact system- Resistant to dust and dirtminimum point of contact between ball andtrapeze rail- 10-year Holzkraft guarantee against wear and tearguidewaysRip fence with round rod guide- With fine adjustment and quick release- Stable round rod guide made of ground45mm diameter steel- Foldable as standard for cutting large onesworkpiecesTechnical specifications:Dimensions and weightsWeight approx. 385 kgDust extraction connectionSuction connection diameter 120 mmSuction connection diameter saw blade protection 60 mmelectrical dataDrive motor power 5.0 kWConnection voltage 400 VFormat sliding carriage and tableFormat slide length 2600 mmFormat sliding carriage width 270 mmFormat sliding carriage height 124 mmTable length 840 mmTable width 560 mmTable height 900 mmcircular saw unitCutting width with rip fence 900 mmMax. cutting width to the left of the saw blade 2310 mmtrimming length 2600 mmSaw blade inclination 90 - 45 °Max. cutting height 90° 90 mmMax. cutting height 45° 63 mmDiameter (main) saw blade 315 mmSpeed ??of (main) saw blade 4000 rpmPU 1Scope of delivery:Table extension and table wideningAnodized aluminum format sliding carriageAluminum folding stopsRip fence with round rod guide andfine tuningItem No. 5504326 Dkobvddsvyupzorbjl

Condition: used, Year of construction: 2006, cutting diameter / mm saw band length / mm table height / mm BEHRINGER band saw in very good condition with heavy-duty roller stand, loadable up to approx. 50 tonnes. The machine is equipped as standard with infinitely variable cutting speed control, so that universal sawing of all materials with low and high strength is achieved. Type HBP650-1204A Machine number 706537 Year of construction 2006 Dimensions 10,000 x 67 x 1.6 m Working range round 20 - 650 mm Working area square min. 20 x 20 mm Working area square max. 1,200 x 600 mm Cutting speed 10 - 110 m/min. Remaining piece length automatic mode approx. 90 mm Remaining piece length manual approx. 10 mm Motor power saw drive 9.2 kW Motor power hydraulic pump 5.5 kW Voltage 400 V, 50 Hz Connected load approx. 16 kW Current consumption approx. 33 A Dsbvddsuia Rkerbokl Material support height 800 mm incl. documentation

Condition: new, Concept 350 Plus Partnership Edition- Cutting length 3200 mm -General equipment features:Saw unit can be tilted up to 46°Pressure beam, incl.:LED lighting with 3 differentaction colors:- WHITE: machine at rest- RED: pressure beam lowers oremergency stop function- BLUE: saw unit movesvariable support table 800 x 200 mmscoring system using main saw blade in synchronizationautomatic workpiece length detection forminimum travel distancesmovable and height-adjustable control panel,incl.:- Saw blade stand- Template holder- Emergency stop button, start button, selector switchGrooving/scoring, sawing/sawing, rotary switch- Feed speed- Switch for laser (optional)- USB socketPartnership Edition, incl.:- Motorized width stop with 4 aluminium stops that move synchronouslyAll 4 stops move up to 1,300 mm. The table is approx. 2,000 mm long.- Screen control (8" touchscreen). The graphical user interface offersthe following functions:- Tool database- Angle cut calculation at the cross-cut fence- Cutting plans can be created and saved- Programs can be saved, exported and imported on USB- Telescopic fence extendable to 3,400 mm incl. 2 digital displaysTechnical data:- Cutting length: 3,200 mm- Max. Saw blade projection: 100 mmat 90°, 72 mm at 45°- Saw blade: diameter 300 - 350 mm,bore 30 mm- Saw blade rotation: 4,000 rpm- Motor: 5 kW (= 7.5 HP)- Feed speed: 0 - 40 m/min.- Total length: approx. 4,270 mm- Weight: from approx. 1,150 to 1,550 kg(depending on equipment)- Required air pressure: 7 bar- Suction nozzle: 1 x 100 mm, 1 x 120 mm- Order AL202 - 38.060,00 € LVP / Partnership Edition 33.490,00 €Options:- Cutting line laser- Order no.: 36410451 - 985,00 € LVP / Partnership Edition 895,00 €- Saw motor with 7,5 kW (10 HP)- Order no.: ,00 € LVP / Partnership Edition 525,00 €available from stock immediately24 h ready for ?v=Heg6aO4rGdc Debvddsvyupnerbokl

Condition: used, used, good condition Make Steton Type SC 400 / 3200 CE type tested Motor boosted 6.5 kW Trolley length approx. 3200 mm Dksbvdjvyt D Djdrbol Cutting width approx. 1300 mm max. blade diameter 400 mm swiveling up to 45° scoring unit parallelogram protection control panel above Rip fence with electrical adjustment Table top extension approx. 400 x 800 mm Electric height adjustment Swivel adjustment electric Digital display: - cutting angle - Rip fence - Rotational speed Extraction connection D 120 / 60 mm Space requirement approx. LxWxH mm 3400x2300x1700 Weight approx. 1000 kg Storage location 97447 Gerolzhofen Handover in the current condition as seen - free loaded -

Condition: new, A machine for beginners and professionals ic equipment:- Manual height and swivel adjustment 0 – 46°of the saw blade, with digital display- drive power 4 kW (5.5 hp) with a speed,4200 rpm.- Double trolley, trolley length 3200 mm- Miter stop, cutting to length up to 3450 mm- Braking device, illuminated button- saw blade diameter max. 315 mm,- Saw blade overhang max. 104 mm- Cutting height 100 mm, 70 mm at 45°- Machine height 88 cmPackage 5 including:- 5.5 kW (7.5 hp), 2 speeds- Rip fence DIGIT X, 1000 mm*- Large extraction hood (PSV)- Without scorer (prepared for the subsequent installation of ascoring unit) Djbvdsvyd Duodrbjkl