Used Europack 24 for sale (10,032)

Year of construction: 2023, condition: used, functionality: fully functional, Palletizing line consisting of: Ausloos pallet feeding and destacking stations Cedpfx Afoz Ipydogshc 2 bag conveyor belts and roller conveyors, approx. 750 cm in length, leading to the loading robot, approx. 120x130 cm Loading robot Winner 400, equipped with a rotating pneumatic bag gripper and powered pallet roller conveyors 2 rotating buffer tables, approx. 192 cm in diameter Transfer station and interleaving sheet station Mesutronic metal detectors, manufactured in 2022 Stimag/ohaus pallet check weigher, type Defender 5000 Xtreme, with a range of 10-1500 kg Evolabel label/labeling machine, type T63 Flexwipe G2, manufactured in 2023 Tosa pallet wrapping station, model 090, manufactured in 2023 Crane arm with Donati hoist Roller conveyors in various lengths, including an output conveyor approx. 8 meters long Safety fence with doors and light barriers Control cabinet Dimensions approx. 17x10 meters Manufactured in 2023 400 Volt Ausloos handling system with two stations, featuring roller conveyors and a gripper unit, installed within a safety enclosure.

Condition: defective spare-parts repository (used), Year of construction: 2014, functionality: not functional, machine/vehicle number: 21236, overall weight: 15,000 kg, empty load weight: 5,320 kg, Ludden&Mennekes LM 24 L – 24 m³ compactor container | Defective / for repair For sale: Ludden&Mennekes LM 24 L compactor container, manufactured in 2014, with a capacity of 24 m³. This heavy-duty compactor container is offered as a defective/repair item. The machine has damage to the compaction section and needs to be technically repaired before further use. The container itself is robustly built and may therefore be of interest to a company that can repair the machine itself, for refurbishment, or possibly as a donor/parts machine. Technical data: Brand: L&M Type: LM 24 L Year of manufacture: 2014 Machine number: 21236 Capacity: 24 m³ Power supply: 400 V / 50 Hz Motor power: 5.5 kW Nominal current: 11.3 A Maximum fuse rating: 25 A Weight: approx. 5,320 kg Permissible total weight: 15,000 kg Heavy-duty industrial design Chjdpfx Ajz Eq N Ujfgec Known defects / damage: The compactor container is explicitly offered as defective. The machine has, among other things: the breaking edge pushed up/deformed; the compaction block is bent and dented; the lids are deformed and damaged; visible signs of wear, rust, and paint damage are present. The damage is shown as accurately as possible in the photos. The machine is therefore sold in its current condition, with repair necessary before it can be put back into normal use. Due to the large capacity of 24 m³ and the heavy-duty construction, this machine may be of interest as a refurbishment project, repair item, or parts machine. Inspection is possible by appointment. For additional information on the technical condition or the existing damage, please do not hesitate to contact us. Keywords: Ludden Mennekes, Ludden + Mennekes, L&M, LM24L, LM 24 L, compactor container, 24m3, 24 m³, waste compactor, container compactor, defective compactor container, repair item, refurbishment project, waste compaction, recycling, parts machine.

Condition: good (used), Year of construction: 2009, D2 Europack Tray / Pot Sealer Codpfet Tyivsx Afgshc Fully stainless steel In good working condition

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, High-resolution printer for photographic papers. Maximum printing size of 60cm x 2.5m. Comes with 3 x 60cm cassettes and 3 x 30cm cassettes. Includes an EZ Controller. Chjdpfxez Hq Sfs Afgoc Purchased new from an authorized dealer and has been serviced exclusively by the authorized service center using genuine parts. In excellent condition and fully operational for any inspection.

Condition: used, Year of construction: 2012, functionality: fully functional, machine/vehicle number: A092469, Complete used Marel 24-station fish filleting and trimming Flowline with integrated OptiWeigher. The system is designed for manual fish filleting and trimming with product transport, operator workstations and production-data collection. When operated with the appropriate Marel Innova configuration, the Flowline can be used to monitor key production parameters including: - throughput, - yield, - operator performance, - production lots, - traceability, - real-time production data, - historical production results. Main equipment: - Marel 24-station Flowline - 24 operator positions - 24 manual work platforms - operator seats - product bins - secondary product / by-product bins - knife holders - water system - stainless-steel construction - Intralox PP conveyor belts - OptiWeigher - Flowline control cabinets OptiWeigher specification - Type: dwu 1900/2*225 - Year: 2012 - weighing accuracy: 2 g - belt width: 225 mm - variable-speed conveyor - nominal speed: 1.3 m/s - 3 × 400 V + N Cjdpfxjz H Tyfj Afgjhc - software: A571 Flowline Flowline - Year: 2012 - base-part serial no.: A092469 - 24 stations - Intralox Series 1600 belts - stainless-steel food-processing design. Suitable for cod, haddock, pollock and other whitefish processing. The system is particularly suitable for processors who want not only a manual filleting/trimming line, but also measurable production performance and yield control. Possible integration with Marel Innova, subject to verification of the installed software licences, controller configuration and interface status. Technical documentation available. Inspection possible by appointment. Price on request.

Condition: excellent (used), functionality: fully functional, Year of construction: 2015, (Please tell us your offer price) Sale only within Europe, incl. Turkey Price without packaging; delivery condition: FCA (machine location) ===== Technical data see handout. All warranty rights are excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, Chjdpfx Aoz Ebznofgoc and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.

Condition: used, Year of construction: 2011, operating hours: 19,500 h, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,200 mm, controller manufacturer: Siemens, controller model: Siemens 840D SL, overall weight: 34,000 kg, spindle speed (max.): 10,000 rpm, coolant supply: 70 bar, spindle nose: SK 50, number of slots in tool magazine: 320, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, 5-Axis Universal Machining Center REIDEN BFR 24 – 4000 mm – TOP Configuration For sale is a high-precision 5-axis universal machining center REIDEN BFR 24 from 2011, in very good condition. The machine comes from industrial production and is ideally suited for machining large and complex workpieces in machine, tool, and mold making. Due to its robust design and high-quality Swiss manufacturing, the REIDEN BFR series offers the highest precision, stability, and reliability. ⚙️ Technical Data Manufacturer: REIDEN (Switzerland) Type: BFR 24 Year of construction: 2011 Control: Siemens 840D sl Axes: 6 (simultaneous machining possible) Travel distances: X: 4000 mm Y: 1000 mm Z: 1200 mm B-axis: ±120° C-axis: 360° Spindle: Mount: SK50 Power: 45 kW Speed: up to 7,000 rpm 🧰 Equipment / Accessories ✅ Tool magazine with 320 positions ✅ approx. 500 SK50 tool holders (!!) ✅ Pallet changer with 3 pallets ✅ Internal coolant system 70 bar ✅ Measuring probe Blum ✅ Stationary table 1600 x 2350 mm ✅ Magnetic/vacuum clamping plate 1050 x 2240 mm ✅ Chip conveyor ✅ various hydraulic lines, renewed in 2023 🚚 Other Machine can be inspected while powered on Machine is available from January 1, 2027 Important conditions: Please note that the sale of this machine is only possible under the following conditions: • Sale exclusively to end users/manufacturing companies (no resale to dealers) – corresponding company profile required • Sale only within Germany or the EU • Inclusion of a dual-use statement in the purchase contract (legally required) Cedpfx Aszhnl Uofgohc Sales / Transfer conditions: • Dismantling, removal, and transportation are the responsibility of the buyer and at his risk. • The buyer is responsible for personnel, tools, and transport equipment. The personnel must only work with appropriate personal protective equipment, and only trained personnel may be used. If you are interested, we look forward to your response in order to coordinate the further details directly.

Year of construction: 2022, operating hours: 1,861 h, condition: excellent (used), functionality: fully functional, For sale is a Rösler wheel processing system, type FBA 24/2 Turbo. This system was specifically developed for the needs of professional wheel processing and, thanks to two laterally arranged unbalance motors, enables flawless results with short processing times. The stepless speed control and adjustable motor position allow the system to be flexibly adapted to almost any processing task. The compact wheel processing system is ideal for pre-grinding, fine-grinding, and polishing of standard and custom wheels up to 24 inches. Thanks to easy operation and quick abrasive change, wheels can be polished to a mirror finish in just a few hours – for a high-quality mirror finish in an elegant metallic look, both for used and new wheels. The pneumatic loading and unloading system makes loading and unloading the wheels very easy and quick. In addition to wheels, other components can also be processed here. The working container is equipped with a flexible clamping device for different wheel types and is lined with a high-quality wear-resistant lining made of polyurethane elastomer (Rösler HD 90). The specially ribbed, stress-relieved, annealed welded construction ensures a long service life and smooth, robust operation even in continuous operation. Application areas: High-gloss polishing of wheels of all types (automotive and motorcycle) up to 24 inches Aluminum, cast, and forged wheels Polishing of other engine components Refurbishing of components, e.g., from the classic car sector or the aerospace, defense, etc. industries Technical specifications: Manufacturer: Rösler Oberflächentechnik GmbH Type: FBA 24/2 Turbo wheel processing system Working container: Inner diameter 700 mm, container depth 550 mm Wear-resistant lining: high-quality polyurethane elastomer, Rösler HD 90 Design: durable, specially ribbed welded construction, stress-relieved, annealed Motors: 2 special unbalance motors designed for continuous operation Chsdpfx Aszw A Rwjfgec Speed: 3,000 rpm, steplessly adjustable via frequency converter Automatic reversing of direction of rotation Various programs can be stored in the Siemens PLC control system, thus achieving reproducible results. An automatic program sequence guarantees a low error rate for the operator. We have a total of over 80 vibratory finishing systems in stock; please contact us for all your vibratory finishing needs.

Condition: used, Year of construction: 1985, machine/vehicle number: 324-016, filling valves: 24 capacity / hour ca.: 4500 Chodpfx Aoz Ib Imofgsc working direction: left-right filling system: vacuum filling Dim. L x W x H [m]: 1,8 x 2 x 2,4 Details: zentrale Höhenverstellung 1,80 Breit, 1,80 Tief, 2,50 Höhe

Year of construction: 1955, condition: used, Union model L.2.A.S. 5" x 24" Lathe. Backgeared and Screwcutting lathe with a detachable gap bed. A practical and characterful old lathe that works well and has plenty of capacity in a compact size. From the family agricultural engineering workshop, which is now sold. 3-phase 415v, so ideal for conversion to variable-speed drive from a 1-phase to 3-phase inverter (not included). 3-jaw chuck, faceplate and a collection of changewheels for screwcutting. I can send a video of it running. Buyer to arrange and fund the shipment. Foklifting onto your van / truck may be possible with the agreement of the new property owner. Please contact me if you would like to arrange this. Chedpfx Afez Hifdegoc Location is near Kings Lynn, Norfolk, UK. If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: good (used), Year of construction: 2011, Due to liquidation, this machine is now available. Condition: very good. Regularly maintained. Immediately available. Hurco VMX24t incl. KITAGAWA rotary table Year of manufacture: 2011 Chjdpfx Afezzlqhjgoc Number of axes: 5 X-axis travel: 610 mm Y-axis travel: 510 mm Z-axis travel: 610 mm 24-position tool changer Electric handwheel Internal cooling system Winmax control

Condition: good (used), Year of construction: 2020, Epilog Cameo Zing 24 Co2 Laser with UML 340 extraction Year of acquisition: 2020 (year of manufacture: 2019/2020) Including rotary engraving device and compressor Cjdpfjyh Rhkex Afgshc Laser power: 30 watts Max. working area: 610×305 mm Max. working height: 191 mm Laser safety class: 2 Resolution: 1,000 dpi Frequency: 10–5,000 pulses/inch Interfaces: 10 Base T-LAN, USB No additional software included. #8480

Year of construction: 2024, condition: ready for operation (used), Kronen RE 24 Kitchen Mixer with Accessories Power: 1.5 kW Manufacturer: Kronen / ALBA Model: RE 24 Infinitely variable speed control: 72–300 rpm Accessories: see photos The machine was completely overhauled in 2024 for approx. €4,000. You are welcome to arrange an inspection appointment. We can also organize cost-effective shipping for you! You will receive a proper invoice. For international customers, net invoices can be issued (subject to providing a valid VAT number). Subject to prior sale. Visit our shop and check out our other listings. Chedpfx Afsyabd Nsgoc Any company names and trademarks mentioned are the property of their respective owners and are used solely for identification and product description purposes. Deviations in technical data or errors in the item description may occur and are reserved.

Year of construction: 2022, condition: new, functionality: fully functional, machine/vehicle number: Q230213, For sale is an unused system for flameless explosion pressure relief, manufactured by REMBE. The device is in absolutely new condition, still packaged in its original wooden transport crate, and will be delivered including original documentation and accessories. Technical data (according to the nameplate): Manufacturer: REMBE GmbH Safety+Control Type: Q-Rohr-3-G-24 Nominal size: DN 600 / 24" Relief area: 2700 cm² Material: Stainless steel Seal: Graphite Burst pressure (at 22 °C): nominal 0.700 bar g (min. 0.595 / max. 0.805) Cjdpozxgtfefx Afgohc Certification: ATEX (IBExU 16 ATEX 2029 X) Signal unit: ROSE Systemtechnik (Type 15.061003, max. temperature 200 °C) Scope of delivery: 1x REMBE Q-Rohr-3-G-24 (in original wooden crate) 1x Original operating manual 1x PHOENIX CONTACT isolation amplifier (MACX MCR-EX-SL-2NAM-T-SP, original packaging) The system is ideal for industrial and process plants that require the highest ATEX safety standards. An on-site inspection is possible by arrangement.

Condition: used, functionality: fully functional, machine/vehicle number: 2213, overall weight: 34,000 kg, axle configuration: 3 axles, first registration: 03/1991, loading space volume: 36 m³, suspension: air, tire size: 385/65/22.5, tire condition: 80 %, color: white, trailer brake: trailer braked, Year of construction: 1991, Equipment: ABS, Insulated stainless steel tank made of V4A steel, three-axle tank semi-trailer, 36,000 liters, 4 compartments, BPW axle, 1st axle can be raised, German vehicle. Cjdpfxez E A E Io Afgshc For sale only to commercial businesses and with the exclusion of any warranty. We deliver to any German seaport.

Condition: used, Year of construction: 2001, Equipment: CE marking, Biesse Rover ROVER 24 FT CNC machining centre Description The work surface consists of a grid table consisting of two phenol tables with a size of 1540 x 1250 mm that can be linked. The grid table has a grid of 30 mm and vacuum openings of 9 mm in a grid of 150 mm in the X and Y-richting. The grid table is equipped with 6 pneumatic zero point cams at the rear and 1 on the left and right sides. • The working range of the machine is 3100 x 1300 x 155 mm. (Z-stroke 250 mm ) • The speed on the X-axis is programmable between 0 and 100 m/min. • The speed on the Y-axis is programmable between 0 and 100 m/min. • The speed on the Z axis is programmable between 0 and 15 m/min. • The three axes are driven by brushless digital DC servo motors. CNC numerical control type NC-500 Milling motor with automatic change system with ISO30. The power of this milling motor is 10.5 hp at 24,000 rpm 10-position tool changer that moves with the unit Drilling unit with fourteen independent drill spindles Groove saw Static frequency converter Centralized pneumatic system Centralized lubrication system Vacuum pump with a capacity of 250 m3/hour Two push-button control panels Working pressure for air 6 kg/cm2. Voltage 380 Volt, 50 Hz. Safety mats on the front. CE Cjdpjzqtztsfx Afgshc (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Trotz größter Sorgfalt bleiben Änderungen, Irrtümer bei technischen Daten, Preisen und allen Angaben (Tipp-)Fehler vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: good (used), functionality: fully functional, machine/vehicle number: WSM00000005299374, empty load weight: 8,559 kg, maximum load weight: 27,441 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 09/2022, next inspection (TÜV): 07/2027, loading space length: 13,320 mm, loading space width: 2,490 mm, loading space volume: 87 m³, suspension: air, tire size: 385/65 R 22.5, color: white, Year of construction: 2022, operating hours: 1,406 h, Equipment: ABS, cooling unit, our vehicle number #30992 Csdpfxsz Ip Sae Afgshc 3 Schmitz axles Tire size 385/65 R 22.5 Permissible total weight 36,000 kg Payload 27,441 kg Unladen weight 8,559 kg Body dimensions (internal, L x W x H): 13,320 mm x 2,490 mm x 2,650 mm, volume: 87 m³ Color: white Double-deck Refrigeration unit S.CU V2.0 with 1,406 diesel operating hours Lift axle Pallet box Portal doors Disc brakes Diesel/electric cooling Temperature recorder Schmitz Flower rack Multi-function floor V7 3 air guide channels 1 row of lashing bars Raise/lower function ABS/EBS Simple external steering rods Interior lighting Work lights Jost fifth wheel Forklift accessible Aluminum rims Load securing certificate EN 14642 Financing available upon request!!!

Condition: excellent (used), AVE RRT 24-24-6 Triblock – Automatic Rinsing, Filling, and Capping Machine AVE RRT 24-24-6 automatic triblock in stainless steel, designed to integrate the rinsing, filling, and capping operations of containers into a single machine within industrial bottling and packaging lines for liquid products. Manufactured by AVE, the equipment combines three consecutive process stages in a compact, rotary configuration: hygienic preparation of the container through rinsing, product dosing, and subsequent application and sealing of the cap. The 24-24-6 configuration provides multiple workstations to achieve a continuous flow of containers and reduce transfers between independent machines. MAIN FEATURES -Manufacturer: AVE -Model: RRT 24-24-6 -Type: Automatic rinsing, filling, and capping triblock -Configuration: 24-24-6 -24 rinsing stations -24 filling stations/valves -6 capping heads -Rotary and continuous operation -Automatic container feed -Synchronized transfer between the different stations -Integrated transport system -Construction primarily in stainless steel -Perimeter enclosure with safety guards -Hygienic design for the food industry -Compact construction for line integration -Designed for continuous industrial production PROCESS Containers automatically enter the AVE RRT 24-24-6 and pass successively through the three main operations. First, the containers are positioned in the rinsing section, where they are prepared before filling. Subsequently, they are transferred to the 24-valve filling section, where the product is dosed. Cedpfjzxcq Hex Afgshc Finally, the containers pass to the 6-head capping station, where the cap is automatically placed and sealed before being discharged to the next stage of production. APPLICATIONS Particularly suitable for manufacturers of beverages, juices, water, liquid food products, and other bottling industries that require concentrating several operations into a single automatic machine. It can be integrated with: Container feeding systems Tanks and product preparation systems Cap feeders Conveyors Pasteurizers Labeling and coding machines Inspection systems Case packers and end-of-line equipment The combination of rinsing + filling + capping in a single AVE RRT 24-24-6 triblock provides a compact solution for automatic bottling and packaging lines. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: excellent (used), functionality: fully functional, mileage: 950,000 km, first registration: 04/2014, fuel type: diesel, overall weight: 32,000 kg, brakes: intarder, emission class: euro6, total length: 10,950 mm, Year of construction: 2014, Equipment: ABS, air conditioning, airbag, differential lock, full service history, MAN TGS 35-480 PM 24 PX crane with 4 hydraulic outriggers + radio remote control Year: 04/2014 4 axles, 8x2 configuration Diesel engine Automatic transmission Euro 6 emission standard Wheelbase: 5,900 mm Platform length: 7,750 mm Total truck length: 10,950 mm Payload capacity: 16,100 kg Gross vehicle weight: 32,000 kg Engine: 12,419 cc (6 cylinders) Power output: 353 kW (480 hp) Rear air suspension Intarder 4th axle: steerable and liftable Suspension: 1st and 2nd axles: leaf spring; 3rd and 4th axles: air suspension Air conditioning ABS Radio Electric mirrors and windows Mileage: 950,000 km DESCRIPTION: MAN TGS 35-480 Cedpfx Afsz Hvh Segshc PM 24 PX crane with 4 hydraulic outriggers + radio remote control Year: 04/2014 4 axles (8x2) Diesel engine Automatic transmission Euro 6 Wheelbase: 5,900 mm Platform length: 7,750 mm Total truck length: 10,950 mm Payload: 16,100 kg Gross Vehicle Weight (GVW): 32,000 kg Engine: 12,419 cc (6 cylinders) Power: 353 kW (480 hp) Rear air suspension Intarder 4th axle: steerable + liftable Suspension: 1st & 2nd axles leaf-sprung; 3rd & 4th axles air suspension Air conditioning ABS Radio Electric mirrors & windows Mileage: 950,000 km

Condition: used, maximum load weight: 32,600 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 04/2024, next inspection (TÜV): 03/2027, loading space length: 7,300 mm, loading space width: 2,340 mm, loading space height: 1,550 mm, loading space volume: 24 m³, total width: 2,550 mm, total height: 3,400 mm, Year of construction: 2024, Equipment: ABS, 3-axle REISCH THERMO HardoX® half-pipe trailer, 24 cbm, with full thermal insulation. First registration 04/2024 Mileage only 92,401 km Loading space dimensions (L x W x H): 7,300 x 2,340 x 1,550 mm Volume: 24 cbm Saddle height: 1,200 to 1,280 mm Loading height/overall height: 3,400 mm SAF axles, reinforced version CD (off-road) with large disc brakes, 430 mm 1st axle: LIFT AXLE WABCO trailer EBS with RSS stability program FERTIGER brake system Lighting system: HELLA Tires: 6 x 385/65 R 22.5 Tread depth: 1st axle: 9 - 10 mm 2nd axle: 15 mm 3rd axle: 10 to 11 mm Chodez Iu Ugopfx Afgjc Ferry lashes, lashing rings for ship loading Towing eye at the rear of the frame HYVA tipping cylinder, high pressure 250 bar, smallest stage hard-chrome plated Tipping angle: 48° Fully insulated HardoX® half-pipe ISOTEXX insulation, 60 mm thick, stainless steel cladding Trough floor made of 5 mm HB450 Trough walls made of 4 mm HB450 Reinforced tarpaulin cover, 900 g/m2, with central closure Internal steel hinged tailgate (with discharge chute) RENTING is the new BUYING, with us, it is also available immediately in a full-service rental.

Condition: good (used), mileage: 27,125 km, color: white, lifting height: 24,000 mm, Year of construction: 2004, Empty weight: 4.780 kg Lifting capacity: 500 kg CE mark: yes Technical condition: good Visual appearance: good Delivery terms: EXW Production country: DE Please contact Vink Machinery for more information Klaas K17-24 * 2004 * Diesel (Iveco) * Benzine (alukraan) Honda *Remote-Control * 500 kg hefvermogen Chjdpjznwc Aefx Afgjc * 24 meter workhoogte * 17 meter horizontaal bereik * 27125 km

Condition: excellent (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 04/2017, total length: 13,950 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65R22.5, wheelbase: 9,010 mm, color: white, Year of construction: 2017, Equipment: ABS, = Additional Options and Accessories = - Air suspension Chedsz Hyfnopfx Afgec - Disc brakes - Toolbox = Notes = Kögel S 24-1 Flatbed + tarpaulin and sliding roof (1) Lift axle 2017 SAF axles Disc brakes Toolboxes TÜV/MOT/APK valid until 05/2027 Belgian semi-trailer Chassis number: WK0S0002400205898 EXPORT SERVICES ————— • NL transit registration/license plates with insurance for 14 days • Austrian transit permit/license plates with insurance for 21 days • Transport to any port in the Netherlands and Belgium • Truck transport with semi-trailer The prices for export services are exclusive of the quoted price. Please contact us for further information. No rights can be derived from incorrect information in the advertisement. GEERTS Trucks & Trailers always strives to ensure the accuracy of all information. GEERTS Trucks & Trailers / GEERTS Nederland B.V. Spoorlaan Noord 17 5121 WV Rijen The Netherlands

Condition: good (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 610 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 610 mm, - ULTIMAX 4 control - toolchanger for 24 tools - coolant through spindle - chip screw - electronical hand wheel - measuring feeler Renishaw Technische Daten / technical details: Verfahrweg X / X-Travel 610 mm Verfahrweg Y / Y-Travel 510 mm Verfahrweg Z / Z-Travel 610 mm Tischgröße / table size 760x510 mm Werkzeugschaft / spindle taper SK40 Drehzahlbereich / spindle speed 10-10000 UpM /rpm Anzahl der Werkzeugplätze / tool places in ATC 24 fach Eilgang / rapid feed 30 m/min Gewicht der Maschine ca. / weight 4700 Kg Csdsx D A Ddopfx Afgjhc Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: used, mileage: 860,250 km, power: 176 kW (239.29 HP), first registration: 07/1989, fuel type: diesel, axle configuration: 3 axles, color: other, gearing type: mechanical, Year of construction: 1989, LICENSE PLATE: PG628274 TITLE: IVECO 175/24 WITH LEAF SPRING FRONT AND REAR SUSPENSION, 6X2 REF: 24C13 YEAR: 07/1989 HORSEPOWER: 240 DISPLACEMENT: 9498 EURO STANDARD: 0 KM: 860250 GEARBOX: manual DIFFERENTIAL LOCK: yes RETARDER/INTARDER: no AXLES: 3, 6x2 WHEELBASE: 4700 TOWING: no ORIGIN: Italy CABIN: low with sleeper NUMBER OF SEATS: 2 PAYLOAD: 14400 kg - TRACTOR UNIT: 24,000 kg at full load - TRACTOR UNIT + TRAILER: BODY TYPE: chassis Csdpfxozzgf Hj Afgjhc TOTAL LENGTH: 9.65 m ACCESSORIES: - REFURBISHED: no INSPECTED: TIRES: 20% PRICE: 3,000.00 € + VAT. Errors and/or omissions excepted. The prices shown do not include VAT. Please contact the sales representative for an updated price and condition comparison. For more information: Loris: 3484773001 URL: #glispecialistidelloscarrabile SCARRABILI AURORA operates in the sector of sales and purchase of industrial and commercial vehicles, specializing mainly in the waste management sector. Specializing in trucks, trailers and hooklift equipment. With a readily available fleet of over 50 trucks and over 150 bodies, containers with and without hooklift cranes. S.E.&O Due to the amount of information and details included, Aurora invites you to verify the accuracy of the data with the sales staff.

Condition: used, first registration: 03/2018, Year of construction: 2018, LANGENDORF SKA 24/3 - Axle - FULL ALUMINUM - Grain tipper trailer, 55 m³ Chodpfoz Ezykox Afgoc • ABS • EBS • WABCO SmartBoard • ALCOA rims • 3 x air-suspended 9-ton SAF axles • Lift axle (1st axle) • GVWR: 36,000 kg (39,000 kg technically possible!) • Tare weight: 6,220 kg • Payload: 32,780 kg • Tires: 385 / 65 R 22.5 • Tire tread: 80 - 90%! • Platform • Roller cover • Overall trailer length: 10,227 mm • Volume: 55 m³ - 1st owner - German trailer - New inspection certificate! Errors and prior sale excepted! = Further information = Tare weight: 6,220 kg