Condition: used, Year of construction: 2009, Cutting length: 4200 mm Cutting width: 3200 mm Max. saw blade protrusion: with blade vertical at 0° = 70 mm with blade tilted at 45° = 50 mm Feed speed forward: 0-80 m/min. Feed speed reverse: 100 m/min. Weight: approx. 5400 kg. Motor power: 14 kW Scoring saw: 1.5 kW Tool: diameter: 350 mm bore: 30 mm Extraction port (bottom): 140 mm Extraction port (pressure beam): 100 mm Storage location: Supplier Crsdpfx Aoyf Nu Tsb Isa

Condition: ready for operation (used), Year of construction: 2012, Panel saw manufactured in 2012. This SCHELLING FH 4 features a nominal cutting length of 4250 mm and a maximum saw blade diameter of 350 mm. It offers a feed speed of up to 80 m/min and is equipped with an ARDIS software package for enhanced functionality. Includes a storage grundner. If you are looking to get high-quality panel cutting capabilities, consider the SCHELLING FH 4 machine we have for sale. Contact us for further details. Panel dimensions • Length: 2000–4100 mm • Width: 300–2100 mm • Thickness: 6–60 mm • Panel thickness tolerance: -0.2 to +0.2 mmMachine specifications • Nominal cutting length (Saw Machine 430): 4250 mm • Main saw blade diameter (max): 350 mm • Scoring saw blade diameter: 300 mm • Max saw blade clearance above table: 95 mm • Max package height: 80 mm • Strip aligner alignment force: 400–2000 N/piece • Max clamp opening: 90 mm • Working height: 970 mm • Overall height: 2070 mmDrives and speeds Crsdpfx Ajyyw U Seb Iea • Main saw motor power: 15 kW • Saw unit feed speed (forward): 5–120 m/min • Saw unit feed speed (reverse): 120 m/min • Feed speed (forward): up to 80 m/min • Feed speed (reverse): up to 80 m/min Additional equipment • Panel storage system (Manufacturer: Grundner) • Length: 24.90 m • Width: 14.17 m • Stack height: 2 m • Lifting height: 2.10 m • Max panel size (L x W): 4.20 x 2.10 m • Min panel size (L x W): 1.80 x 0.60 m • Max lifting capacity: 250 kg • Horizontal drive power: 2.2 kW • Horizontal travel speed: approx. 120 m/min • Vertical travel speed: approx. 40 m/min • Panel material: suitable for vacuum gripping technology • Connected load: 6 kW • ARDIS software package

Condition: excellent (used), For panels measuring 5600 x 2600 (2700 mm), thickness from 2 mm to 60 mm N° 2 double-deck infeed roller conveyors, 1 x 6.000 mm long and 1 x approximately 3.800 mm long Hydraulic lifting table (5600 x 2700 mm ca.) System with rubber wheels (11 top + 11 bottom) for panel pressure/feeding Sliding bridge with 45 suction cups and 5 supports (for panel stack alignment) 1st Rear - Pusher, with 11 clamps Rotating table (90° panel rotation) with plastic wheels 1st Panel Saw AH8 580 - Max cutting width mm 5600 (Max blade projection mm 165) Scoring Unit (max. diameter saw / power) mm 200 ca. (Kw 2,2 ca.) Main Sawing Unit (max. diameter saw / power) mm 520 ( Kw 32) Adjustable speed of the saw carriage (m/min) 0 - 150 Sliding crosspiece with 7 pushers for cut panels With 4 supports (for panel stack alignment) and 3 motorized chains 2° Rear - pusher, with No. 25 (27) clamps/grippers Codpfjxvc N Dsx Ab Iora 2nd Panel Saw - Max cutting width mm 2700 (Max blade projection mm 165) Scoring Unit (max. diameter saw / power) mm 200 ca. (Kw 2,2 ca.) Main Sawing Unit (max. diameter saw / power) mm 520 (Kw 32) Adjustable speed of the saw carriage (m/min) 0 - 150 Waste evacuation system with grinder VECOPLAN (Kw 55) Plastic wheels coated table for cut panel output Stacking system for cut panels with N° 2 front support tables with air blowing system 400 x 6300 mm + N° 8 lifting tables (4 are 1300 x 1600 mm and 4 are 1300 x 1410 mm) - Total power KVA 130

Condition: excellent (used), For panels measuring 5600 x 2600 (2700 mm), thickness from 2 mm to 60 mm N° 2 double-deck infeed roller conveyors, 1 x 6.000 mm long and 1 x approximately 3.800 mm long Hydraulic lifting table (5600 x 2700 mm ca.) System with rubber wheels (11 top + 11 bottom) for panel pressure/feeding Sliding bridge with 45 suction cups and 5 supports (for panel stack alignment) 1st Rear - Pusher, with 11 clamps Rotating table (90° panel rotation) with plastic wheels 1st Panel Saw AH8 580 - Max cutting width mm 5600 (Max blade projection mm 165) Scoring Unit (max. diameter saw / power) mm 200 ca. (Kw 2,2 ca.) Main Sawing Unit (max. diameter saw / power) mm 520 ( Kw 32) Adjustable speed of the saw carriage (m/min) 0 - 150 Crjdexvc Rzjpfx Ab Ioa Sliding crosspiece with 7 pushers for cut panels With 4 supports (for panel stack alignment) and 3 motorized chains 2° Rear - pusher, with No. 25 (27) clamps/grippers 2nd Panel Saw - Max cutting width mm 2700 (Max blade projection mm 165) Scoring Unit (max. diameter saw / power) mm 200 ca. (Kw 2,2 ca.) Main Sawing Unit (max. diameter saw / power) mm 520 (Kw 32) Adjustable speed of the saw carriage (m/min) 0 - 150 Waste evacuation system with grinder VECOPLAN (Kw 55) Plastic wheels coated table for cut panel output Stacking system for cut panels with N° 2 front support tables with air blowing system 400 x 6300 mm + N° 8 lifting tables (4 are 1300 x 1600 mm and 4 are 1300 x 1410 mm) - Total power KVA 130

Condition: excellent (used), Numerical Control Power Control + Software Cadmatic 4 Professional No. 1 Infeed roller tracks (ca.) 32,000 mm Lifting table (mm) 5600 x 2200 VAC loader (sliding bridge) with fan suction for loading special or delicate panels 1° Rear-pusher, with No. 6 clamps/grippers Turning device (rotating unit) at 90° 1° Panel Saw - Max cutting width mm 5600 (cutting line with air cushion) Csdpjvnq H Esfx Ab Isra Max blade projection (mm) 190 Scoring Unit (max. diameter saw / power) mm 200 (Kw 2,2) Main Sawing Unit (max. diameter saw / power) mm 600 ( Kw 36) Adjustable speed of the saw carriage (QS) (m/min) 1 - 130 m/min 2° Rear-pusher, with No. 14 clamps/grippers 2° Panel Saw - Max cutting width mm 2200 (cutting line with air cushion) Max blade projection (mm) 190 Scoring Unit (max. diameter saw / power) mm 200 (Kw 2,2) Main Sawing Unit (max. diameter saw / power) mm 600 (Kw 36) Adjustable speed of the saw carriage (QS) (m/min) 1 - 130 m/min Waste evacuation system with grinder (Kw 19.5) No. 2 Front supporting tables with Air blowing system (mm 800 x 2160) Plastic wheels coated with special material to avoid scratching delicate panels Automatic unloading System of the cut panels: N° 2 x Liftomat HAU-A 25/12 Automatic Stacking System with 8 stations

Condition: excellent (used), Angular sawing plant Numerical Control OSI Plus - Software Optiplanning N. 2 Pre-loading roller tables (mm) approx. 4500 x 2200 each Lifting table (mm) 4500 x 2200 1° Rear-pusher, with No. 5 clamps/grippers Turning device (rotating unit) at 90° 1° Panel saw (longitudinal) max. cutting width (mm) 4500 Max blade projection (mm) 152 Csdpfx Aoukhd Asb Iera Scoring Unit (max. diameter saw) mm approx. 215 Main Sawing Unit (max. diameter saw / power) mm 530 ( Kw 30) Adjustable speed of the saw carriage (m/min) 1 - 170 m/min Cutter for shredding trimmings 2° Rear-pusher, with No. 10 clamps/grippers 2° Panel Saw - Max cutting width mm 2200 Max blade projection (mm) 152 Scoring Unit (max. diameter saw) mm approx. 215 Main Sawing Unit (max. diameter saw / power) mm 530 (Kw 30) Adjustable speed of the saw carriage (m/min) 1 - 170 m/min No. 2 Front supporting tables with Air blowing system mm 2200 x 1500 Automatic unloader (bridge) for cut panels "RBO (BIESSE)" Mod. Lifter with 6 stacking stations

Condition: excellent (used), Casolin panel saw with scoring unit, 2004, table length 2000 mm Csdpfx Asyyuvgjb Isra

Condition: used, Year of construction: 2021, only 24 operating hours – like new Base machine 1 pc Cutting technology meets the future The CONTROL series has always defined its own class – the premium class for vertical panel saws. But even this lead never stands still. We have developed the CONTROL into a vertical panel cutting centre of the premium class, with higher automation of the sawing process and additional equipment options. Above all, the 12" touchscreen computer and new machine software provide improved user comfort in every detail. Saw Frame • Precision manufacturing to 1/100 mm in key components • Massive, self-supporting welded saw frame with high torsional rigidity • Full-surface support panel made of birch plywood with integrated small parts shelf • Auxiliary stop profile with its own tape measure and 3 auxiliary stops for repeat cuts • Automatic detection of the center support • Automatic roller lock during the cutting process Saw Beam • Stable, durable steel saw beam construction • Automatic saw beam locking with cut position detection Saw Unit • Play-free, smooth-running guides • Robust motor carriage bearings ensure high cutting precision • Powerful, high-torque 5.5 kW motor (7.5 HP) • Enhanced operator comfort thanks to largely automated operation • Laser-assisted display of horizontal cuts • Automatic clamping of the motor carriage • Automatic plunging and swiveling of the saw motor • Pneumatic clutch for quick change to manual operation • SUPERSILENT sound insulation to reduce saw blade noise Csdpfx Aeyyqz Sjb Ijra • Electromagnetic motor brake Control System • 12" touchscreen computer with optimal user guidance • Multilingual user interface • Tool database for high flexibility and absolute repeat accuracy • Fully automatic sawing process • Variable feed speeds from 10–25 m/min • Selectable saw cycle • Panel end detection • Constant return speed • Operating hours counter • Network connectivity Dimension Adjustment • Digital measuring system DMS.x (horizontal axis for vertical cuts) • Electronic positioning system EPS.y including ABO (vertical axis for horizontal cuts) Design, Ergonomics • STRIEBIG’s signature product design • Multiple awards (including the Swiss Design Award) • Functionality and operator-friendly ergonomics Installation • Wall-mounted or free-standing (option) installation possible Note: Permissible ambient temperature: min. +5°C / max. +40°C Relative humidity: 19–95% If mains voltage fluctuations exceed ±10% of the nominal voltage at the installation site, a voltage stabilizer must be used. Type 5216 Cutting range 4300x2160/2016x80mm 1 pc Cutting length: 4300 mm Cutting height vertical cut: 2160 mm Cutting height horizontal cut: 2016 mm Max cutting depth: 80 mm Min cutting depth (automatic feed): 4 mm Min cutting depth (manual feed): 2 mm Exact installation dimensions can be found in the brochures or installation diagrams. ProLock Easy-Fix tool clamping system 1 pc Electronic positioning system "EPS-X" (horizontal axis for vertical cuts) 1 pc Paper holder 1 pc Small parts support, aluminum (2 pieces) 1 set Kit for free-standing installation (Types 5168, 5216, 5224, 6168, 6216, 6224) 1 set Storage location: Customer

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, type of input current: three-phase, saw blade diameter: 360 mm, Raimann ProfiRip KM310 Multi-blade Saw Track width: 330 mm Maximum saw blade spacing: 310 mm Cutting height: 120 mm Sleeve diameter: 80 mm Passage width: up to 650 mm Cjdsx E Ug Aepfx Ab Iera Feed speed: up to 35 m/min Electrically adjustable saw shaft height Saw blade size: 280-360 mm Quickfix rapid-change system Motor power: 30 kW CE certificate Year of manufacture: 2007

Condition: good (used), functionality: fully functional, Double mitre saw ALFAMACCHINE T350 Double saw for 45-degree angle cuts Blade diameter: 350 mm Csdjyyna Eepfx Ab Iora Blade bore diameter: 30 mm Blade speed: 3,000 rpm Motors: 2×1.5 kW Air requirement: 5–7 bar Cutting width: 15–80 mm Cutting height: 10–80 mm

Condition: good (used), functionality: fully functional, OMGA Radial 700 Radial Arm Saw Max cutting width at 90°: 700 mm Max cutting height: 110 mm Saw unit adjustable for angle in two planes Saw blade speed: 3000 rpm Main motor power: 2.61 kW Pneumatic feed of the saw unit Cjdpfxoyym Afs Ab Isra

Condition: used, Year of construction: 2005, power: 7.5 kW (10.20 HP), cutting height (max.): 170 mm, cutting width (max.): 1,100 mm, saw blade diameter: 500 mm, tilt adjustment saw blade: 46 °, height adjustment type: hydraulic, saw blade bore: 30 mm, rotational speed (max.): 5,500 rpm, rotational speed (min.): 2,800 rpm, total length: 3,300 mm, total width: 2,000 mm, total height: 1,800 mm, overall weight: 1,500 kg, Equipment: CE marking, No. 04528 Sliding table saw Martin T 73 BASIC Csdpfjyymtdox Ab Isra Used, year of construction 2005 Sliding table 3000 mm Maximum cutting height 170 mm Maximum saw blade diameter 500 mm Saw blade bore 30 mm Cutting width 1100 mm Motor 7.5 kW Speeds 2800 / 4000 / 5500 rpm Hydraulic saw blade tilt 0° - 46° Hydraulic cutting height adjustment Circular saw ruler can be lowered Pneumatic saw shaft lock Cross table with fixed angle adjustment Length stop extendable up to 3300 mm Sliding table with stepless locking Integrated contact for controlling the dust extraction system Central lubrication point Transport dimensions approx. 3300 x 2000 x 1800 mm LWH Weight approx. 1500 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or shipping Terms of delivery: ex warehouse

Condition: new, Year of construction: 2025, Diameter of saw wheels mm 800 Max. cutting height mm 400 Stationary working table mm 1290 x 800 Max. blade width mm 54 x 0,9 Max. and min. blade length mm 5530 / 5380 Motor power Kw 15 (HP 20) Sawdust hoods nr Nr. 2 Ø 120 Nr. 1 Ø 100 Compressed air consumption (wheels braking and feeder opening) bar 6 Net weight Kg 880 Feeder Height of feeding carpet mm 300 Length of carpet fence mm 750 Idle rollers dia. mm 160 Max. rollers-blade clearance mm 200 Max. fence-blade clearance mm 200 Csdpfeglfv Dex Ab Iora Variable feed speed rate mt/min 0-30

Condition: good (used), Automatic pendulum saw from Pfeiffer and APK. Cutting height 150 mm. Cutting width approx. 500 mm. Saw motor 5.5 kW. Electric adjustment. Pneumatic saw ejection. Travel distance approx. 2000 mm. Codpfow Icxwjx Ab Iora

Condition: excellent (used), functionality: fully functional, Heavy-duty Raimann multi-blade saw. Chain bed width 500 mm. Usable clamping length of saw sleeves 570 mm Cutting height 120 mm. Powered top rollers. Electric pressure beam adjustment. Spiked chain. Counter bearing. Stepless hydraulic feed from 0 - 50 m/min. Drive motor 75 kW with pneumatic tensioning station. 2 saw sleeves. Safety devices. Electrical control cabinet. Etc. Some new parts installed. Credpfextwv Hox Ab Ija

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, Holtec package cross-cut saw Vario Cut with Holtec mechanization. Jörg Elektronik. Complete disposal/removal under the cross-cutting system. Credpfew Smz Djx Ab Iea

Condition: excellent (used), CATALOG NUMBER 7903 Technical data: - track width: 450mm - shaft width: 420mm - installed saw blade: 400mm - max saw blade diameter: 450mm - saw blade bore diameter: 80mm - max cutting height with 450mm blade: 160mm - table dimensions: 2230x860mm – from above: - kickbacks/stoppers - sliding shaft - kickbacks - smooth sliding roller - hold-down - shaft with saws - hold-down Credpfx Aboynkvde Isa - 2 sliding, hold-down shafts – from below: - roller in front of the table - guide - stoppers - track - central track lubrication - manual lifting of saw shaft - electric body lifting: 0.75kW - stepless feed speed adjustment - extraction port diameter: 280mm - main motor: 75kW - overall dimensions (L/W/H): 2360x200x1960mm - weight: 3250kg ADVANTAGES – Czech production – used multi-blade saw – upper control panel – DTR (technical documentation) – very good condition Net price: 69,900 PLN Net price: 16,650 EUR Net price calculated at exchange rate of 4.2 PLN/EUR (in case of larger currency fluctuations, the price may change)

Condition: excellent (used), Catalogue number 7280 TECHNICAL DATA - track width: 340mm - shaft width: 400mm - max blade diameter: 350mm - blade bore diameter: 80mm - max cutting height: 120mm - table width with clearance: 700mm - table length: 1720mm from above: - pawls - metal slip pressure roller - pawls - metal slip pressure roller - shaft with saw blades - 2 pcs metal slip pressure rollers from below: - guide bar - metal slip roller - pawls - track - electric body lifting 0.55kW - central lubrication - variable feed speed control 1.5kW - main motor 37kW - dust extraction nozzle diameter: 200mm - overall dimensions (L/W/H): 1800x1670x1780mm - weight approx. 2500kg – German made – Used multi-blade saw, in very good condition Original photos Crsdoymnryepfx Ab Iea Net price: 76,900 PLN Net price: 18,300 EUR (depending on an exchange rate of 4.2 EUR) (Prices may vary with significant fluctuations)

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, CATALOG NUMBER 7563 Technical data: - track width: 340mm - shaft width: 360mm - blade bore diameter: 70mm - max. blade diameter: 315mm - max. cutting height: 180mm Crjdpjx S Nadefx Ab Ioa * from above - feed shaft, toothed, pneumatically pressed - 2 rows of kickback fingers - 3 smooth pressure slip rollers - kickback fingers - shaft with saw blades - 3 smooth pressure slip rollers - kickback fingers * from below - infeed traction shaft, toothed - track - shaft with saw blades - track - stepless feed speed regulation via inverter - main motor 2x55kW - feed motor 4kW - electric lifting of upper body up/down - electric adjustment of saw blade shafts - central lubrication - extraction port diameter: 2x150mm - dimensions (L/W/H): 2800x2400x1900mm - weight approx. 5000kg ADVANTAGES – Italian production – double shaft – ideal for large elements – used multi-blade saw, in very good condition Net price: 145,900 PLN Net price: 34,740 EUR based on 4.2 EUR rate (Prices may change with significant fluctuations)

Condition: excellent (used), CATALOG NUMBER: 6911 TECHNICAL DATA - Track width: 350 mm - Shaft width: 370 mm Codpjyh Nr Uefx Ab Iora - Max cutting height: 200 mm Maximum saw blade diameter: - Upper shaft: 340 mm - Lower shaft: 300 mm - Blade bore diameter: 80 mm From above: - Kickback guards - 2 pressure slip shafts - Pressure unit - Saw shaft 37 kW - 2 smooth slip shafts From below: - Infeed table + guide rail - Kickback guards - Crawler track - Saw shaft 37 kW - Crawler track - 1 outfeed shaft, slip, smooth - Pneumatically pressed rollers - Maximum saw blade diameter: 300 mm - Electric lifting of upper body up/down 1.1 kW - Automatic central lubrication - Electrically controlled stepless feed speed adjustment 3 kW - Extraction nozzle diameter: 230 mm, 250 mm - Dimensions (LxWxH): 3000x2300x1900 mm - Weight: approx. 4500 kg ADVANTAGES – Italian production – Twin-shaft – Used multi-blade saw – very good condition Net price: PLN 168,900 Net price: EUR 40,200 Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), CATALOG NUMBER 6650 TECHNICAL DATA - Max cutting height: 200 mm - Track width: 450 mm - Shaft width: 450 mm - Blade bore diameter: 80 mm - Shaft diameter: 60 mm - Min. blade diameter: 250 mm - Max. blade diameter: 350 mm - Max. width of cant: 870 mm - Min. length of cant: 1500 mm From above: - Pawls - Feed shaft, toothed, metal - Pawls - Feed shaft, toothed, metal - Pressure unit - Shaft with saw blades - 2 feed shafts, metal, pneumatically pressed From below: - Guide - Metal sliding roller - Pawls - Track - Shaft with saw blades - Track - Stepless feed speed adjustment via inverter 4-40 m/min - Main motors: 2 x 75 kW - Feed motor: 3 kW - Electric vertical movement of body up/down: 0.55 kW - Electric adjustment of saw blade shafts: 2 x 0.25 kW - Central lubrication - Extraction nozzle diameter: 2 x 300 mm - Dimensions (L/W/H): 3100 x 2600 x 2000 mm - Weight: approx. 6500 kg - Centering device included - Toothed feed rollers: 3 pcs Codpfxjyk Hg Rs Ab Iera - Smooth feed rollers: 8 pcs - Motor: 2 x 1.5 kW - Pneumatic top pressure - Side pressure - Dimensions (L/W/H): 4850 x 1100 x 1800 mm - Weight: approx. 1000 kg ADVANTAGES – Czech manufacture – Double-shaft design – Centering device – DTR documentation – Year of manufacture: 2010 – Used multi-blade saw, in very good condition Net price: 262,900 PLN Net price: 62,600 EUR Net price calculated at the exchange rate of 4.2 PLN/EUR (in case of significant currency fluctuations, the price may change)

Condition: excellent (used), Year of construction: 1998, Panel saw Striebig Type Automat 6220 Cutting capacity : 5300 x 2200 mm Cutting height : 80 mm Horizontal cutting height : 2100 mm Year of construction 1989 Built-in suction device Manual or automatic feed 11/17/22/33 m/min Machine width 6300 mm Year of manufacture 1989 Saw blade 300 Ø 7.5 HP motor Ready for immediate use Very good condition Crsdpfovgnzqox Ab Isa Digitron digital measuring system horizontal and vertical The machine has been dismantled Location Stock 2281 Raasdorf

Condition: used, functionality: fully functional, load capacity: 3,500 kg, Rotating Device ISO Class: ISO Class 2 = 1,000 - 2,500 kg Condition: Ready for use and fully functional Technical Condition: good Description: Year 2021 ISO 3A (51 cm) Capacity 3,500 kg Rotator 180° Width 675 / 1,120 mm ID OS1931 Credpfx Aeyzdfaob Ioa

Condition: used, functionality: fully functional, load capacity: 2,000 kg, Rotator ISO Class: ISO Class 2 = 1,000 - 2,500 kg Condition: Ready for use and fully operational Crsdpfx Aoyzdc Esb Ija Technical Condition: normal Description: ISO 2A (41 cm) Capacity 2,000 kg Rotator 360° Width 790 mm / 1040 mm ID OS1921

Condition: used, functionality: fully functional, load capacity: 2,000 kg, Rotator ISO Class: ISO Class 2 = 1,000 - 2,500 kg Condition: Ready for operation and fully functional Technical Condition: normal Crodpfx Asyzdcxjb Ija Description: ISO 2A (41 cm) Capacity 2,000 kg Rotator 360° Width 790 mm / 1,050 mm ID OS1919