Used Saw 3 for sale (66,969)

Condition: good (used), Bandsa for re-sawing blocks and planks type Canali multiline ML 1100 with 3 band saw units Bdodpfez Hbh Dex Amrjh Sawpully, width 105 mm, max width of saw blade 120 mm. Speed of the bandsaw blade 28/32/36/42 m/sec Feed-work has below measurements. - Height of feed rollers 200 mm - Diameter of feed rollers 100 mm - Max opening saw blade to anvil side 230 mm - Max opening saw blade to pressure side 230 mm - Max opening Center cut 460 mm

Condition: excellent (used), Year of construction: 1997, Rip and cross saw REMA DMLK 30 Producer of REMA Machine model / type DMLK 30 Year of production 1997 Machine category Longitudinal and transverse saw Location Gorzów Wlkp. Conditions of delivery PERSONAL COLLECTION Cost of delivery Customer cover Startup type to be agreed Description Comments - after the technical review - very good condition - year of production 1997 TECHNICAL PARAMETERS: Bdsdpofv Hphsfx Amrsh main engine 3.9 kW trolley length 1370 mm blade diameter 300 mm angle adjustment 0 - 45 " height adjustment cutting height max. 90 mm cutting width on the right side 885 mm ruler length 1350 mm ratchet extended receiving table two kinds of blade rotation speed 3700 and 5000 RPM The protractor visible in the photos is an additional option for PLN 400 net dimensions: length / width / height 135 x 85 x 135 cm weight ~ 320 kg

Condition: excellent (used), Panel Beam Saw - With rear lifting table Numerical Control POWER CONTROL V2.1 (Power TOUCH) Software CADmatic 5 (TAPIO READY) Lifting scissor table (mm) 3800 x 2200 Rear pushers (N.) 1 with clamps / grippers (7 + 2) Bedoz Erw Hepfx Amrodh Max. cutting width (mm) 3800 - Useful stroke of the pushing system (mm) 3800 Max blade projection (mm) 125 Scoring Unit (max saw diameter / power) mm 180 / Kw 2,2 (ca.) Main Sawing Unit (max saw diameter / power) mm 450 / Kw 28 Adjustable speed of the saw carriage (m/min) 1 - 150 Front supporting tables with Air blowing system (N.) 3 (2 x 2160mm x 800mm + 1 x 2810mm x 800mm) Total power (Kw) 34

Condition: used, Year of construction: 2022, PANEL SAW Manufacturer: HOMAG Bdedpjzkmrfofx Amrsh Type: SAWTEQ B-200 Optimat HPL200/38/22 Year: 2022 With loading system

Condition: excellent (used), Year of construction: 2021, Angular sawing plant Numerical Control PowerControl V2.1 - CADmatic 5 (Tapio ready) No. 1 Rollers table for pre-loading (useful mm 2200 x 4500 approx) Lifting table (mm) 4300 x 2200 1st Rear-pusher, with No. 4 clamps/grippers 1st Panel Saw - Max cutting width mm 4300 Max blade projection (mm) 125 Bdjdpox Aqdcofx Amrjh Scoring Unit (max. diameter saw / power) mm 180 (Kw 2,2) Main Sawing Unit (max. diameter saw / power) mm 450 (Kw 28) Adjustable speed of the saw carriage (m/min) 1 - 150 m/min 2nd Rear-pusher, with No. 8 clamps/grippers 2nd Panel Saw - Max cutting width mm 2200 Max blade projection (mm) 125 Scoring Unit (max. diameter saw / power) mm 180 (Kw 2,2) Main Sawing Unit (max. diameter saw / power) mm 450 (Kw 28) Adjustable speed of the saw carriage (m/min) 1 - 150 m/min No. 2 Front supporting tables with Air blowing system (2 x mm 800 x 2810) Total installed power A 102 OPTION: No. 1 Waste grinder

Condition: used, Year of construction: 2002, machine/vehicle number: 021203, Machine Name - Mega saw Machine Model - H1830 s.n 021203 Specification - Year 2002 3.7kw Main motor Semi- automatic 82- 250 FPM Variable speed control Max bar cutting size 460mm In-built coolant tank with pump and screw auger. Bdedowxmhljpfx Amroh Manual vice

Condition: used, Year of construction: 2008, functionality: fully functional, manual in images. This is a 5 head horizontal Band Saw. It has tilting heads making it ideal for Feather Edge board production. It has 18KW motors. This machine comes with its own saw sharpening equipment and 10 new blades. All power feed wheels have been replaced with new. It runs on 30mm blades. All new power feed sprockets and fully DC braked. Bsdpfxezwh Rcs Amredh

Condition: used, Year of construction: 1994, Edging machine / Double edger EWD Esterer Model: DK90 TL 1000 Year of manufacture: 1994 Maximum feed width: 1000 mm Maximum cutting height: 120 mm Total of 3 saw blades Bdodpsyam Exjfx Amrsh 2 saw blades adjustable Measurement system: Combimes With S-type conveyor With cross-cut saw With infeed unit Esterer ARS TR With 2-strip chip separator Machine can be fully overhauled upon customer request! Already dismantled and ready for loading at any time Location: Austria, near Leoben

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 23022001, workpiece width (max.): 80 mm, workpiece height (max.): 70 mm, main saw diameter: 350 mm, tilt adjustment saw blade: 45 °, production capacity: 1,900 unit/h, This machine is an automatic double miter saw! TECHNICAL DETAILS Process stations: up to 6 Cutting angle: 45° Suitable materials: wood, MDF, strips, profiles, and aluminum, depending on the saw blade Cutting performance / production output Production output: 1,500 to 1,900 cuts/hour Cutting type: simultaneous double miter cut Workpiece dimensions Workpiece width max.: max. 80 mm Workpiece height max.: 70 mm Saw unit Saw blades: 2 x diameter 350 mm Cutting positions: 2 Saw blade position: 45° Feed / material feed Feed stroke max.: 1,200 mm Bdsdpfx Aozdkttemrsh Feed stroke optional max.: 1,600 mm Feed length max.: 3,200 to 6,200 mm Vertical feed length: 3,000, 4,000, 5,000, or 6,000 mm MACHINE DETAILS Motor power: 2 x 1.5 kW System: industrial pneumatic system Clamping system: vertical and horizontal pneumatic clamping Software version: 6.0.7.0 Operation: touchscreen, mouse, or external keyboard Programming methods: frame method and list method Production data: production reporting Extraction nozzle: 2 x diameter 80 mm Extraction: prepared for dust and chip extraction Control: PLC / control modules Control cabinet: industrial control cabinet with relays, transformer, circuit breakers, and cable ducts Cooling: forced ventilation Layout / installation dimensions / weight Installation length Layout 1: 6,282 mm Installation depth Layout 1: 1,100 mm Installation length Layout 2: 8,250 mm Installation depth Layout 2: 4,000 mm Installation length Layout 3: 13,952 mm Installation depth Layout 3: 9,000 mm Partial dimension Layout 2: 2,560 mm Partial dimension Layout 2: 2,490 mm Partial dimension Layout 2: 3,200 mm Machine weight: 550 kg EQUIPMENT Automatic double miter cut Vertical or horizontal material feed Primary material gripper system Optional advanced material gripper system Speed-feed servo system Vertical and horizontal clamping device Unloading belt with ejector Kick-out conveyor Pneumatic transfer conveyor Touchscreen control Password-protected software platform Manual control of all machine commands Programming via frame or list method Simulation and visualization of cutting programs Cutting and material optimization Production data acquisition Operating panel with screen and indicators PLC / control modules Industrial relays Mean-Well power supply Transformer Circuit breaker Wiring in cable ducts Forced ventilation Industrial pneumatic actuators Tested connections and hoses Emergency stop Safety devices Prepared for dust and chip extraction

Condition: used, Year of construction: 2000, machine/vehicle number: 300584, power: 7.5 kW (10.20 HP), cutting height (max.): 360 mm, cutting width (max.): 400 mm, Equipment: CE marking, documentation/manual, High-performance, heavy-duty automatic horizontal bandsaw from premium German manufacturer Behringer. Designed for precise and cost-effective cutting of solids, tubes, and profiles. Key Features: Stable Dual-Column Design: Twin-pillar construction guarantees vibration-free operation, geometric accuracy, and maximum blade life. Fully Automatic Operation: Equipped with a hydraulic material feed system and automated clamping vices for mass production cycles. Bdedozbg E Iepfx Amreh Behringer NC Control: Original digital operator panel for easy programming of cutting lengths and batch sizes. Condition: The machine is in fully operational condition, regularly maintained, and currently located in an active production workshop environment. CE certified.

Condition: excellent (used), Year of construction: 2019, operating hours: 4,135 h, overall weight: 3,500 kg, table height: 740 mm, coolant pump power: 1,500 W, saw band length: 5,300 mm, saw drive: 5,500 W, Saw from the year of production 2019 / post-show saw - first launch in 2021. Saw in very good technical and visual condition. Bdjdpjuiu Sijfx Amrjh Technical parameters in the photo above. Price without rollover.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: P260713249, The HOMAG SAWTEQ B-300 profiLine is a high-performance industrial beam saw designed for the precision cutting of coated and uncoated wood-based panels. Engineered for continuous production environments, it combines robust mechanical construction, high cutting performance, automated material handling, and intelligent digital control to maximize productivity while maintaining exceptional cut quality. Bedpfx Aozmglkjmrodh Key performance features include a 3,800 mm cutting length, ±0.1 mm/m positioning accuracy, and a powerful 24 kW main saw motor with a 2.2 kW scoring saw, ensuring clean, chip-free cuts even on laminated materials. The saw carriage reaches feed speeds of up to 130 m/min, enabling short cycle times and high daily output. Material handling is highly automated through a 4-ton hydraulic lifting table, dual micro-feeders, automatic loading for thin panels, alignment units, and an optimized pusher system equipped with 11 lifting clamps. Air cushion tables with integrated air nozzles facilitate effortless panel movement while protecting sensitive surfaces from scratches. The machine is built around a heavy-duty steel frame with precision rack-and-pinion drives, maintenance-free measuring systems, and a patented central squaring system that reduces cycle times by up to 25% compared with conventional designs. The robust construction ensures long-term dimensional accuracy, minimal vibration, and excellent repeatability. Operation is managed through the PowerControl V2.1 system with a 24-inch Full HD multi-touch display, HOMAG powerTouch interface, CADmatic 5 software, integrated diagnostics, tool management, and network connectivity. The machine is also tapio Ready, enabling future integration with HOMAG's digital production ecosystem and Industry 4.0 services. Additional features such as ecoPlus energy-saving technology, automatic cutting height adjustment, optimized dust extraction, pneumatic saw movements, electric scoring saw adjustment, and remote diagnostics via TeleServiceNet further enhance machine efficiency, reduce operating costs, and simplify maintenance. Overall, the SAWTEQ B-300 profiLine provides an ideal solution for manufacturers seeking high productivity, precision, automation, and digital connectivity in industrial panel processing.

Condition: used, Year of construction: 2018, This HOLZKRAFT panel saw, model Minimax si400es, will be auctioned off online in our industrial auction / machinery auction – closing down of a well-known toy manufacturer’s site – including injection molding machines, storage equipment, and logistics accessories – STEP 3. Bdodez H Rlfopfx Amroh You can find this and many other items on our platform.

Condition: used, Twin vertical band saw with log lengthener. Suitable for widths from 70mm to 200mm. Log length from 50cm up to 3.7 meters. Bdjdpfjyh Hc Rsx Amrsh

Condition: new, functionality: fully functional, input voltage: 380 V, input frequency: 50 Hz, cutting width (max.): 1,250 mm, saw blade diameter: 400 mm, tilt adjustment saw blade: 45 °, rotational speed (max.): 6,000 rpm, 3-axis CNC panel saw model TECNOMAC ENG T45 V380/50 "CE" NEW – AVAILABLE FOR IMMEDIATE DELIVERY ▸ Aluminium sliding table 3200x430 mm ▸ Sliding stroke: 3400 mm ▸ CNC-controlled lifting/tilting/parallel rip fence ▸ Parallel fence travel: 1300 mm ▸ Saw blade tilt range: 0-45° ▸ Max blade diameter with scorer installed: 400 mm ▸ Max blade diameter without scorer: 450 mm ▸ Rotation speed: 4500/6000 rpm ▸ Main motor power: 5.5 kW ▸ Scoring unit with independent 1.1 kW motor ▸ Scorer blade diameter: 120 mm ▸ Scorer speed: 8200 rpm ▸ Parallelogram-type extraction hood ▸ Machine start control on carriage ▸ Hold-down clamp on carriage ▸ Digital readout on extendable fence ▸ Pendant control panel with PLC touch-screen Bdjdpfx Aey N T N Rjmrsh Machine available for viewing at our Gorizia facility (by appointment only).

Year of construction: 2000, condition: good (used), Brand: SICA Bsdpfx Asxu I Szjmredh Type of machine: Planetary saw Model: TRC/S/SY/U 63-400 Year of manufacture: 2000

Condition: good (used), Year of construction: 2008, Striebig Panel Saw Compact 5220, Year of Manufacture: 12/2008 Solid, self-supporting, firmly welded saw frame with high torsional rigidity Stable, durable saw beam steel construction Robust mounting of the motor carriage ensures high cutting accuracy Powerful, low-vibration 3.0 kW motor (S1) TRK dust extraction system Automatically adjusting aluminum slat grid with plastic supports Device for wall mounting Ball-bearing support rollers Bdodpfx Aozp Nt Asmreh Split center support at optimal working height, with aluminum grid Integrated small parts support made of wood Supersilent sound insulation to reduce saw blade noise Electromagnetic motor brake Saw weight approx. 910 kg Cutting depth 60 mm Saw motor power 3.9 kW (5.3 HP) Saw blade diameter 250 mm Saw blade bore 30 mm *1 Emission sound pressure level at the workplace LpA 82 dB *2 Saw blade speed 5250 rpm 2 dust extraction ports ø 100 mm Connection value 4.8 kW Mains connection 3 x 400 V / 50 Hz Cutting range: L: 4600; H vertical: 2200 mm, H horizontal: 2100 mm Equipment: - Compact 5220 - Freestanding support, complete Location: Available from warehouse 54634 Bitburg - immediately available -

Condition: used, Year of construction: 2022, DOUBLE-SWIVELING SAW UNIT: MAXIMUM CUTTING HEIGHT WITHOUT COMPROMISE. RIP FENCE FULL SUPPORT & WIRELESS: APPLICATION AND PRECISION MECHANICS. CONSOLE eye-S: THE USER-FRIENDLINESS OF ACCESSING ALL FUNCTIONS VIA THE CONTROL. Technical data Linvincibile si x Max. cutting height at 90° (mm) 200 with 550mm saw blade Max. cutting height at +45° (mm) 130 with 550mm saw blade Max. cutting height at -45° (mm) 105 with 550mm saw blade Saw blade swivel angle (degrees) -46 ÷ +46 Raising and swiveling of the saw unit programmable Control/work height display Easy Touch Saw blade speed (rpm) 3000 ÷ 5000 (inverter) Main motor power kW (hp) 9 (12) Hz50 Format cuts: - with carriage 3200 (mm) - with carriage 3800 (mm) 3200x3200 3800x3200 Cutting width with parallel fence (mm) 1600 Dust extraction port diameter: - on the frame (mm) - on the saw blade guard (mm) - on the riving knife (mm) 120 100 Standard equipment: - Rip fence completely in aluminum structure with guiding system on dovetailed, hardened, and arc-ground steel guides with large contact area - Version with rip fence 3200 mm - 10-year warranty on the guiding system of the saw carriage - On/off switch for main saw/scorer on the rip fence - eye-S 15" electronic control unit complete with: * 15" touchscreen monitor * Direct control of the following working axes with manual, semi-automatic, automatic, and incremental mode: - Height adjustment of the main saw blade - Tilting of the saw unit - Parallel fence adjustment - Height and side adjustment of the scorer (the scorer is automatically raised to the set position when the power is turned on, and lowered when the power is turned off) * Speed adjustment with frequency converter * Operator assistance functions for performing complex cuts * Possibility of saving up to 1000 programs with relative images * Possibility of saving up to 1000 different tools with relative images * Cutting sequence control from preloaded parametric machining programs * Environment for creating and saving new sequential work programs * Automatic acquisition of work dimensions from the Thundercut app * USB port * Preparation for network connection - Auxiliary function of the electronic control with: * Determination of the correct stop position on the fence for format machining with a tilted saw blade * Determination of the correct stop position on the fence for angled cuts with a miter fence on the work table with or without a tilted saw blade - Swiveling control panel over the table - Programmable parallel fence with THK guide-controlled axis and guided by a stable ball screw with a travel speed of 25 m/min. - Parallel fence can be completely swung away under the work table, cutting width on the parallel fence 1600 mm - Support arm for the rip fence with positioning on prismatic linear guides with ball bushings - "Full Support & Wireless". Frame for miter cuts complete with wireless function. Adjustment with angle settings from +50° to -50° perpendicular to the cutting axis with corresponding fine adjustment. Angle detection system on magnetic strip and LCD display. Real-time updating of the position of the fence, with 3 LCD displays, when changing the saw blade swivel and/or the cutting angle. - Motor power 9kW (12hp) 50Hz - 11kW (15hp) 60Hz - Inverter for electronic speed control from 3000 to 5000 rpm Bjdpfx Amsz H Txzeredh

Condition: used, Year of construction: 1973, Max. cutting length 3200 mm (distance from 1st to 3rd saw blade) with left-side circular saw tiltable up to 45°. Cutting capacity 2200 x 2500 mm. 3 motors, each 4.5 kW. Both cross-cut saws tiltable from 45° to 90°, each with a scoring motor. All three saws up to 400 mm diameter. Minimum cutting width 210 mm. Both scoring saws pneumatically moved forward and back with vacuum suction cups for panel fixation. Storage location: Nattheim. Bodpfx Amovvkm Iorsdh

Condition: new, Holzkraft L invincibile si 3 BLADE OFF sliding table saw BLADE OFF safety system - exhibition machine- ----- Technical specifications ----- Supply voltage: 400 V, Mains frequency: 50 Hz, Scoring motor power: 1.3 kW, Drive motor power: 9.0 kW, Format sliding table length: 3200 mm, Format sliding table width: 360 mm, Table length: 1040 mm, Table width: 630 mm, Cutting width with parallel stop: 1500 mm, Max. cutting width to the left of the sawblade: 3200 mm, Trimming length: 3200 mm, Bdsdpfov Nhg Ssx Amroh Sawblade inclination: 90 - 45°, Max. cutting height 90° with 400 mm sawblade: 120 mm, Max. cutting height 45° With 400 mm saw blade: 89 mm, Saw blade speed: 3000 - 5000 rpm, Scoring saw blade diameter: 120 mm, Scoring saw blade speed: 8500 rpm, Length approx.: 7250 mm, Width/Depth approx.: 4460 mm, Height approx.: 1770 mm, Net weight approx.: 1307 kg, Extraction nozzle diameter: 100 and 120 mm The BLADE OFF system detects potential hazardous situations early and prevents them by retracting the saw blade into the machine table in a fraction of a second. With the help of sensors, the system is able to distinguish between the workpiece and the operator. An LED light in the saw blade guard indicates with a green light whether the safety system is active. Controlled via the 15" eye-S control console. Connection to the SCM Thundercut (optimizer/sequence control app) is possible. Three longitudinal stops with integrated digital displays. Electrically adjustable parallel stop. Start/stop buttons for the main and scoring saw blades integrated in the sliding carriage. Special guides and an innovative curved grinding system enable the edger carriage to have a fourfold higher load capacity. Ball-bearing telescopic arm ensures greater stability and smoother workpiece guidance. Equipment Two-axis scoring unit with automatic positioning Anodized aluminum sliding table On/off switch on the sliding table for the main and scoring sawblade motors Trimming frame with angle-adjustable aluminum telescopic stop Material roll on the trimming frame Motorized saw parallel stop via control panel Three longitudinal stops with integrated digital displays Eccentric clamp Control of sawblade height, tilt, and parallel stop Pivoting control panel on top Table extension Table extension Sawblade pendulum protection - new exhibition machine -

Condition: ready for operation (used), Year of construction: 2022, machine/vehicle number: 0-341-73-4415, functionality: fully functional, operating hours: 4,522 h, power: 7.5 kW (10.20 HP), cutting width (max.): 3,200 mm, saw blade diameter: 310 mm, saw blade bore: 60 mm, overall weight: 5,000 kg, TECHNICAL DETAILS Maximum cutting width: 3,200 mm Maximum cutting length: 3,200 mm Saw blade projection: 65 mm Maximum feed speed: 60 m/min Programmable pusher speed forward: 25 m/min Programmable pusher speed backward: 60 m/min Saw carriage speed: 60 m/min Manual crosscut stops: 4 units Saw blade bore diameter: 60 mm Maximum saw blade diameter: 310 mm Scoring unit bore diameter: 45 mm Scoring saw blade diameter: 150 mm MACHINE DETAILS Control: CADmatic 5 Main saw motor: 7.5 kW Bodpfxoy Ai Upo Amredh Operating hours: 4,522 Dimensions & Weight Transport dimensions: 8,000 x 2,400 x 2,000 mm Transport weight: 5,000 kg EQUIPMENT Intelliguide optical LED guidance system 1 air table 2,100 x 650 mm with roller elements 2 air tables 1,800 x 650 mm with roller elements 21.5-inch touchscreen CAD Plan 4 optimization software Clamping fixtures: 50, 250, 450, 1200, 2000, 2700 mm Scoring saw unit

Condition: excellent (used), Year of construction: 2016, Cutting Capacity 0° round (tube): 300 mm Cutting Capacity 0° round (solid material): 180 mm Cutting Capacity 0° rectangular horizontal (hollow section): 320 x 290 mm Cutting Capacity 0° bundle (tube): 320 x 160 mm Cutting Capacity -45° round (tube): 300 mm Cutting Capacity -45° round (solid material): 110 mm Cutting Capacity -45° rectangular horizontal (hollow section): 300 x 280 mm Cutting Capacity -60° round (tube): 200 mm Cutting Capacity -60° round (solid material): 80 mm Cutting Capacity -60° rectangular horizontal (hollow section): 190 x 200 mm Cutting Capacity +45° round (tube): 270 mm Cutting Capacity +45° round (solid material): 110 mm Cutting Capacity +45° rectangular horizontal (hollow section): 270 x 200 mm Table height, material feed: 800 mm Main motor: 2.6 kW Cutting speed, stepless: 20 - 100 m/min Saw blade size: 3660 x 27 x 0.9 mm Machine dimensions (L x W x H): approx. 1800 x 950 x 1400 mm Net weight: 585 kg Accessories / Special features: • Semi-automatic swing-frame metal band saw • After the cutting cycle is started, the vice clamps automatically – after completion, it returns to its starting position • For mitre cuts from +60° to -45° with frequency inverter • Suitable for cutting stainless steel, tool steel, hollow profiles, and solid materials • Fully hydraulically controlled sawing functions • Saw drive with low-maintenance, oil-lubricated worm gear • Robust three-phase motor • Motor equipped with overload protection • Ball-bearing turntable • Saw arm inclined at 25°, resulting in longer saw blade service life • Saw arm swivels from +60° to -45° • Chip removal brush for optimal saw blade cleaning and maintenance • Frequency inverter: allows stepless adjustment of saw blade speed from 20 - 100 m/min • BRP – Saw band monitoring • Hydraulic vice with manual quick-release for lateral adjustment • Limit switches control upper and lower saw arm positions • No need to set the upper end point • Length stop with scale, left-side removal 3 m Bedpfx Amexz Dqmeredh • Cut detector • Swivelling control panel • Micro-spray device • 2 x roller conveyors: 3 m discharge left, 6 m feed right • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: new, Panel Saw ALTENDORF F 35 Type 3 - 1000 -Exhibition Machine- 5.5 kW (7.5 HP), 3 speeds, Motorized height and tilt adjustment, Large protective hood, Double roller carriage 3,200 mm, Scoring unit with LED lighting, CNC rip fence, cutting width 1,000 mm, Bdedpfx Amow Imptjroh Angle-mitre fence 3,450 mm, without length compensation, Table extension/table widening, High-quality CDF surface ----- Technical Specifications ----- Tilting range: 0 - 46°, Carriage length: 3,200 mm, Cutting length: 3,100 mm, Cutting width: 1,000 mm, Cutting height: 154 mm, Max. saw blade Ø: 450 mm, Motor power: 5.5 kW, Screen size: 15 inch, Table height: 910 mm, Extraction port Ø: 80 + 120 mm - New exhibition machine -

Condition: as good as new (ex-display), Year of construction: 2005, ACCEPTANCE OF SELF feed head is held on the guides of hardened cylindrical surface and additionally treated grinding. Three-phase motor power 3HP 2800 rpm / min. Output frontal saw blades with cutting heads. Feed discs cost of delivery SEMI AUTOMATIC DOUBLE MITRE SAW Technical Data Right head displacement by means hand wheel Reading of the cutting dimension on high precision metric scale with micrometric adjustment Sliding of the moving head by means of ricirculating ball bearings on rectified and tempered guides Radial sliding of the sawing group Full protection of the sawblades by means of safety hoods with automatic closing Pneumatic heads tilting at 90°/+ 45°/-45° Possibilty to mount sawblades Ø 500 - 530 - 550 mm 2,2 Kw (3 HP) 3 phase motors - 2800 r.p.m. Sawblade shaft Ø 30 mm Cutting lenghts 4000/5000/6000 mm Working pressure 7 bar Overall dimensions 524-624-724x139x155 cm Weight 1200 - 1350 - 1500 Kg Standard Equipment Horizontal pneumatic clamps Automatic lubrication by means of nebulizer Air filter Air gun Service spanners Optionals Reading of the cutting dimension on digital display Turning vertical clamps kit Pneumatic central support Manual central support Right head in feed roller conveyor Semi-automatic reduced cut modification c/w in feed roller conveyor Vee notch device for PVC profiles Micro-spray nebulising device Pneumatic support for long bars cover customer Startup type negotiated Description Bjdeb Rnv Sjpfx Amrjdh Notes Saw 2 a head for precision cutting of aluminum profiles GAMMA. Precise double miter saw for serial production of blanks at an angle of 90 ° and 45 °. Convenient and safe execution of multiple cutting operations. Automatic positioning of the moving cutting head. Automatic positioning of the moving cutting head. Adjustable stroke discs. The angles of inclination of the cutting head 45 °, 90 °, easy pneumatically. Intermediate angles are adjusted manually using the bumper and angular scale. LENGTH OF CUT = 4000 5220 x 1390 x 1460 mm Weight 1200 kg.

Condition: excellent (used), Year of construction: 2001, Technical Data Bandsaw B 3; Year of manufacture 2001 For wood and metal Cutting height: 500 mm Cutting length: 660 mm Angle: 0° Saw blade dimensions: 4620 x 27 mm Table size: 710 x 1060 mm Rated power: 3.00 kW Power supply: 380/50 V/Hz Dimensions: 790 x 1200 x 2290 mm Weight: 275 kg Bdodpfxjy E Nfae Amreh