Used Saw And Drill for sale (15,725)

Condition: excellent (used), Year of construction: 1997, Rip and cross saw REMA DMLK 30 Kedpfx Asfv Hphshvjdi Producer of REMA Machine model / type DMLK 30 Year of production 1997 Machine category Longitudinal and transverse saw Location Gorzów Wlkp. Conditions of delivery PERSONAL COLLECTION Cost of delivery Customer cover Startup type to be agreed Description Comments - after the technical review - very good condition - year of production 1997 TECHNICAL PARAMETERS: main engine 3.9 kW trolley length 1370 mm blade diameter 300 mm angle adjustment 0 - 45 " height adjustment cutting height max. 90 mm cutting width on the right side 885 mm ruler length 1350 mm ratchet extended receiving table two kinds of blade rotation speed 3700 and 5000 RPM The protractor visible in the photos is an additional option for PLN 400 net dimensions: length / width / height 135 x 85 x 135 cm weight ~ 320 kg

Year of construction: 1998, operating hours: 297 h, condition: ready for operation (used), functionality: fully functional, saw blade diameter: 200 mm, rotational speed (max.): 3,000 rpm, screw diameter: 35 mm, machine/vehicle number: E0195/10, No reserve price – guaranteed sale to the highest bidder! Single-screw extruder with only 297 operating hours, including cutoff saw and haul-off unit! Hussmann ES35 x 30D TECHNICAL DETAILS Screw diameter: 35 mm Length: 30D MACHINE DETAILS Motor power: 16 kW Operating hours: 297 h Cutoff Saw TECHNICAL DETAILS Three-phase motor speed: 3,000 rpm Three-phase motor output: 0.55 kW Saw blade diameter: 200 mm Haul-off Unit Kdsdpsyrmzqefx Ahvji TECHNICAL DETAILS Haul-off speed: 20/30/40/50/60 m/min Haul-off force: 11,700 / 7,800 / 5,800 / 4,700 / 3,900 N Contact length: 800 mm Max. belt width: 160 mm Max. profile height: 160 mm MACHINE DETAILS Drive power: 2 - 5.6 kW Weight: 800 kg EQUIPMENT Complete electrical and electronic control system with remote control box Digital speed display Ammeter 10-step helical potentiometer

Condition: used, Year of construction: 2022, operating hours: 220 h, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, input current: 100 A, We are offering this used Voortman V631 & VB1050 automated drilling and sawing line, year of manufacture 2022, with only 220 operating hours. This offer is based on the following system configuration: Sawing and drilling line VB1050 & V631M (system 20210262), consisting of: 4×5 m cross conveyor (infeed) – 16 m roller conveyor (infeed) Sawing unit VB1050 – Drilling unit V631M – Chip conveyor – Underside marking unit – 16 m roller conveyor (outfeed) – 4×5 m cross conveyor (outfeed) Safety devices If you have any questions or need more information, please send us a message or give us a call. Kedpfoyvviyox Ahvjdi

Condition: ready for operation (used), Voortman VB1250 lintzaag dop: 1250 x 500 mm versteksnede +/- 60°: 1000 x 500 mm versteksnede +/- 45°: 850 x 500 mm versteksnede -30°: 500 x 500 mm zaagsnelheid: 40 120 m/min vermogen: 7,5 kW Afmetingen van de lintzaag: 11.000 x 54 x 1,6 mm Voortman V630 drievoudige boorunit 2 horizontale booreenheden 1 verticale booreenheid Elke unit heeft een automatische gereedschapswisselaar met 5 posities. spindel: SK40 (koeling via de spindel) Boordiameter: 8/40 mm boorsnelheid: 0 2000 tpm schroefdraad tappen: M8/M24 Inclusief meting van de profielhoogte middelpuntmarkering inbegrepen nummeringseenheid inbegrepen 18 meter aan invoerrollenbanen 6 dwarsaanvoerbanden van 4 meter lengte 16 meter aan afvoerrollenbanen maximale breedte: 1050 mm capaciteit: 400 kg/m³ maximaal positioneringsgewicht: 9 ton Rollentoevoer meetsysteem = onbeperkte meetlengte Vacon 110 CNC-besturing Hydraulisch aggregaat 4 kW - 160 bar Kdjdpfswlkwwex Ahvei

Condition: used, Year of construction: 2007, functionality: fully functional, For sale: Fully functional FICEP 1001 DZB saw and drilling line, including roller conveyors – infeed side max. 18.20 m, outfeed side max. 15.10 m, band saw cutting range up to 1,015 x 450 mm, CNC drilling unit. The machine has been regularly maintained by a specialist company. Sale ex works (without disassembly and reassembly – must be organized by the buyer). The machine is currently still in operation and can of course be inspected. Disassembly and reassembly can be organized – costs to be borne by the buyer. The system is sold as a used unit, without guarantee and without warranty. Kedpfsyrnp Ajx Ahvjdi

Condition: used, Year of construction: 1999, functionality: fully functional, KALTENBACH Saw and Drilling Line – KBS 851 DGNC + APS 1003 – up to 1,000 mm – Year of Manufacture: 1999 General Information: Manufacturer: Kaltenbach Machine Type: Automatic saw and drilling line for steel profiles Bandsaw: KALTENBACH KBS 851 DGNC Drill Line: KALTENBACH APS 1003 Year of Manufacture: 1999 Condition: Used, fully functional Location: Germany Availability: Dismantling possible from mid/end of March 2026 Inspection: The system is operational and can be inspected under power Sale: Without guarantee or warranty Machine Description: For sale is a complete Kaltenbach saw and drilling system for processing heavy steel profiles. The line consists of a CNC-controlled bandsaw KBS 851 DGNC as well as a drilling unit APS 1003, including extensive infeed and outfeed roller conveyors and cross transfer conveyors. The system is currently in operation and has been reliably used in steel construction until now. It is ideally suited for efficient processing of beams and profiles in both series and project work. Typical Areas of Application: - Steel construction / hall construction - Metalworking - Beam processing (IPE, HEA, HEB, UPN, etc.) - Series and single-part manufacturing Technical Data: Bandsaw KBS 851 DGNC: - Maximum beam height: up to 800 mm - Mitre cutting: swivelable on both sides +45° / –45° - CNC-controlled length positioning - Automatic sawing mode Kodpsyak Anjfx Ahvjdi Drill Line APS 1003: - Maximum beam height: up to 1,000 mm - CNC-controlled profile processing via drill portal - Suitable for web and flange machining Roller Conveyors & Material Handling: - Roller conveyor width: 1,000 mm - Infeed roller conveyor: approx. 15,000 mm - Outfeed roller conveyor: approx. 15,000 mm - Infeed cross transfer conveyor: approx. 4,000 mm - Outfeed cross transfer conveyor: approx. 4,000 mm Condition: - System is complete and fully functional - Currently in operation - Age and usage-related signs of wear - Sale as is - No guarantee or warranty Scope of Delivery: - Bandsaw KBS 851 DGNC - Drill line APS 1003 - Infeed and outfeed roller conveyors - Cross transfer conveyors (infeed and outfeed) - Control cabinet / operating unit - Existing safety devices - Documentation where available Dismantling & Loading: - Dismantling to be carried out by the buyer - Dismantling possible from the end of March 2026 - On site available: * Forklift truck * 2 gantry cranes each with 5 t lifting capacity - Good site access and loading conditions

Year of construction: 2011, condition: ready for operation (used), functionality: fully functional, saw blade diameter: 350 mm, workpiece length (max.): 6,000 mm, workpiece width (max.): 60 mm, workpiece height (max.): 15 mm, TECHNICAL DETAILS Max. workpiece width: 60 mm Max. workpiece height: 15 mm Max. workpiece length: 6,000 mm Drilling diameter: 16 mm Saw blade diameter: 350 mm Infeed roller length: 10,000 mm Kjdpeygw Ttsfx Ahvodi Thread cutting: M12 MACHINE DETAILS Total power requirement: 15 kW Dimensions & Weight Required space: approx. 12.0 x 2.0 x 2.3 m Machine weight: approx. 3.2 t EQUIPMENT Saw 4 x top drilling units 4 x bottom drilling units 6 x drilling and threading units 2 x countersinking units

Condition: ready for operation (used), The U2PRW cutting and drilling machine is designed for processing slats and furniture fronts made of solid wood or MDF. The machine works in a semi-automatic cycle. During one cycle the machine performs: cutting at a given angle (in the range of 45 - 90 degrees) and drilling in the jammed plane, or the edge of the element. - Made in Poland Kdedpfx Ahjq Ii Dlovsi TECHNICAL PARAMETERS: max. height of cut material 60 mm max. width of cut material at an angle of 45° 70 mm max. width of the material at an angle of 90° 150 mm max. length of cut material 2200 mm min. length of cut material at 45° 455 mm diameter of main saw 250 or 300 mm undercutter diameter 100 mm max. diameter of bottom milling cutter 35 mm max. depth of bottom milling 15 mm diameter of face drill embedment and bottom milling cutter 10 mm Drill head (face drilling): spindles 4 axial spacing of spindles 32 ; 32 ; 40 mm linear arrangement of spindles max. depth of face drilling 60 mm installed power 7 kW working pressure 0.6 Mpa overall dimensions (length / width / height) 4300 / 1600 / 1570 mm Machining units The machine is equipped with two machining units. The left unit, which is fixed, and the right unit - a sliding unit. Each machining unit consists of the following sub-assemblies - units: a main saw, an undercutting unit, a drilling unit that drills into the jammed plane, and a drilling unit that drills into the bottom of the workpiece. Bottom hole drilling unit The described aggregate is installed as an option. It is used in the processing of corner ties for doorframes with adjustable width. It makes a blind bore , for the can connector. The picture shows the mounted red cover which is at the same time the base for the machined angle strips and the cover with chip extractor. Workpiece pressure The machine tool is also equipped with a clamping system operating in two planes. The clamping area includes horizontal and vertical clamps. The horizontal clamps are responsible for pressing against the vertical bases and straightening the workpiece. Vertical ones, on the other hand, are responsible for immobilizing the workpiece during machining. The horizontal pressure always precedes the vertical pressure. Control The machine's control is clear, easy to use and functional. It allows switching on or off all aggregates separately, additionally with division into left and right sides. All aggregates have independent drive. The right-hand processing unit is set by pressing the control buttons on the control panel. The executive mechanism is a gearbox with an electric motor driving a trapezoidal screw. An electronic control system US with an operator panel and digital display is used to read and set the length of the workpiece. This system is also responsible for automatic corrections to the counter readings when the cutting angles change by 45° and 90°. In addition, it is responsible for automatic basing.

Condition: used, Double-sided drilling and mitre saw, with adjustable vertical blades, 2 lower drilling heads, 2 upper drilling heads Kdjdpfsv Tnihjx Ahvoi

Condition: reconditioned (used), Year of construction: 2007, functionality: fully functional, total length: 2,000 mm, total width: 1,250 mm, total height: 2,000 mm, type of input current: three-phase, input voltage: 400 V, power: 40 kW (54.38 HP), saw blade diameter: 450 mm, workpiece width (max.): 300 mm, workpiece height (max.): 30 mm, air pressure: 6 bar, extraction connection diameter: 200 mm, hone diameter: 125 mm, number of spindles: 2, MARINUS PROMAX - Endmatcher and defect saw. The machine is according to following specifications: - Stable and heavy construction, dimensions LxDxH = 2080x1260x2000 mm. - Continuous feeding system with accurate positioning (servo). - Pneumatic sidepushers for guaranteed square angle. - PLC-steering. - Operating by terminal. - Modem for programming at distance. - 2 servomotors for maximum dynamics. - 2 sawingmotors (3,0 kW). - 2 high-speed millingmotors with inverter (7,5 kW each /200 Hz/n=12.000). - 1 motorgearbox with inverter. - 2 drummotors. - 26 pneumatic cylinders with valves. - 1 luminescence-sensor - 6 inductive-sensors - Bandconveyor for waste, height 1,3 mtr. - Machine completely closed by safety-doors. - Machine according to CE-requirements. Length-measuring system: Kdedpfx Ajq Auhdohvji A lenght-measuring-system displays the total lenght and square meters of the boards on the display during production. Tooling: We can offer tooling (tongue and groove) with disposable knives and 2 crosscutsawblades as an option for the machine. Standard Programming: The machine is equipped with 2 main programs: 1 Endmatching 2 Cutting Both main programs have 2 sub programs: 1. Variable lenghts: defects are cut out, endproducts are of all variable lenghts. 2. Fix lenghts: boards will be produced at a fixlenght, infeedlenght has an oversize of max +200 mm. Cutting out defects is not possible. - Min. Width 60 mm - Max. Width 300 mm - Min. Length 500 mm - Max. Length 6000 mm - Min. Thickness 10 mm - Max. Thickness 30 mm

Condition: excellent (used), Year of construction: 2012, Vernet Behringer HD-X 918 / HBP 410/923 CNC Sawing / Drilling Line – Year 2012. Split system. 3 Spindle. Automatic tool changer. 24 metres infeed. 18 metres outfeed. Gripper Feed measuring system. Infeed and outfeed Cross Transfers. Kodpfx Ahox Ruudovodi

Condition: excellent (used), Year of construction: 2013, Vernet HD-X 618 / HBP 410/723 G CNC Drilling / Sawing Line – Year 2013. 3 Spindle Drill. 16.5 metres In-Feed. 14 metres Out-Feed. Ksdpfx Aex Rut Tohvedi Pusher Unit Feed. Milling / Slotting. Solid Carbide Tooling. Small parts conveyor. 4 way Scribing. In-Feed Cross Transfers. Out-Feed Cross Transfers.

Condition: used, Year of construction: 2006, Web height min 80mm. max 1220mm. Flanges height min 42mm.max. 600mm. Kodpfx Aox N Iclehvsdi U channels min. 80mm 1200mm Flanges height min.45mm max 300mm. Angles min. 80x80x8mm max.300x300x50mm Flats min.100mm max.1220mm Square tubes min.80x80mm max.600x600mm Rectangular tubes min. 80x40mm max.1200x600mm Positioning weight max. 15000Kg Linear weight of the section to be handled max. 750Kg/m Carriage speed max. 30m/min. No. of drill heads 3 - two horizontal Drill Heads with single spindle - one vertical Drill Head with single spindle Max. drilling diameter 50 mm. - with tapered adaptor No.4 Max. thickness that can be drilled 75 mm. Spindle rotation motor per head (a.c.) 15 kW Spindle R.P.M. (with continuous adjustment by program) RPM 180 - 3000 Positioning stroke to suit the gauge line :- vertical drilling unit 20 to 1200 mm.- horizontal drilling units 10 to 600 mm. TOOL CHANGE - number of tools change devices n. 3 - number of tools to be changed n. 6 - adaptor size ISO 45 Model 1260 BH for sections cold sawing : - sawing capacity at 90° min. 80 x 10 mm - sawing capacity at 90° 1250 x 600 mm - sawing capacity at 45° 800 x 600 mm - sawing capacity at 60° 500 x 500 mm - sawing band motor 11 kW - sawing speed 20÷100 m/min. - band size 67 x 1.6

Condition: used, Year of construction: 1993, Machine: Double-sided through-feed operation with additional: 4 drilling supports vertically from above 4 drilling supports horizontally from behind Units: Tiltable Workpiece length (mm): 330 - 2500 Workpiece width (mm): 40 - 180 (200 mm for straight cuts) Workpiece thickness (mm): 15 - 80 mm Dowels (mm): 8 + 10 + 12 x 30 + 40 + 50 Dowel projection (mm): 10 - 25 Machine dimensions: Kedpfx Ahjwbuw Tevedi Length (mm): 8040 Width (mm): 5850 Height (mm): 2500

Condition: excellent (used), Year of construction: 2012, DRILLING MACHINE: Power consumption, kW 9 Maximum thickness of the processed wall 40 mm Minimum thickness of the processed wall 6 mm Diameter of holes 6 - 40 mm Tool rotation speed 0 – 2100 rpm Tool change automatic Feed gripper movement speed 1 – 720 mm/min Kdedpfjvkp Dhox Ahvei Horizontal clamping force 1 x 2.5 tons Vertical clamping force 4 x 1.5 tons Dimensions of workpieces to be processed: Maximum 1200 x 600 mm Minimum 80 x 6 mm SAWING MACHINE CPI 105DI

Condition: excellent (used), Year of construction: 2018, 2018 KALTENBACH KDP1036 CNC DRILLING / MILLING / SCRIBING LINE – KBS 1051 SAWING LINE. INFEED CROSS TRANSFERS T13 20.5 METRES INFEED CAPACITY. Kodpfx Ahsxmvm Rsvsdi GRIPPER FED MATERIAL MEASUREMENT KDP1036 3 AXIS. AUTOMATIC TOOL CHANGER. 500MM SUB AXIS FOR MILLING, DRILLING, MARKING & TAPPING. INTEGRATED CHIP CONVEYOR KBS 1051 SAW HORIZONTAL AND VERTICAL CLAMPING AUTOMATIC FEED CONTROL Automatic adjustment of saw band angle LS 270 MEASURING HEAD OUTFEED 19.750mm OUTFEED CROSS TRANSFERS T13

Condition: excellent (used), Year of construction: 2012, Voortman V613 / VB1050 Split System CNC Drilling / Sawing Line – Year 2012. Rotating Spindle. Automatic Tool changer. 24 metres In-Feed to VB1050. 24 metres Out-Feed to V613 CNC Drilling line. 24 metres Out-Feed. Roller Feed. VACAM CNC Control. Short piece removal. Ksdpfxev U Ea He Ahvedi

Condition: good (used), Year of construction: 2007, DRILLING MACHINE Operating range V630/1000M Min. / max. height 10 – 450 mm Min. / max. width 60 – 1.050 mm Max. positioning weight 9.000 kg Kdedpovpafyjfx Ahvoi Number of drilling units 3x Automatic tool changer 3x (3x 5 positions) Height measuring Included Width measuring Included Machine weight 12.000 kg Roller feed measuring system Max. speed 42 m/min Min. infeed length 1.500 mm Drilling unit VD40 Feed and positioning servo-motors with servo-invertors Spindle rpm Stepless 100 – 2.500 rpm (servo-motors) Lubrication Internal by mist of air / oil Holder SK 40 Drill diameter oil-tube-drills 8 – 40 mm Drill diameter carbide drills 13 – 32 mm Thread tapping M8 – M24 Centre point marking possibility Yes, 3 sides SAWING MACHINE Sawing machine VB1050 Capacity (h x w) 0° 500 x 1.130 mm Capacity (h x w) +/- 15° 500 x 1.060 mm Capacity (h x w) +/- 30° 500 x 925 mm Capacity (h x w) +/- 45° 500 x 725 mm Capacity (h x w) +/- 60° 500 x 470 mm Saw band speed stepless 40 – 120 m / min Saw drive motor 7,5 kW Saw band dimensions 9.550 x 54 x 1,6 mm Hydraulic band tension 48.000 N Machine weight +/- 8.500 kg

Condition: excellent (used), Year of construction: 2011, Ficep 1003 DZB CNC Drilling / Sawing Line – Year 2011. 3 Spindles. Automatic Tool Changer. Scribing. Short Piece Removal. Kdjdpoxmvnuofx Ahvji Hard Stamping. Gripper feed. Infeed and Outfeed Cross Transfers. 1000mm Section Capacity.

Year of construction: 2007, condition: good (used), Danobat CNC Drilling / Sawing Line – Year 2007 Single Rotating Spindle. 18 metres In- Feed Rollers. 12 metres Out- Feed Rollers. Pincher Unit Feed. Infeed Cross Transfers. Kdedpfx Aoig T Amehvei Outfeed Cross Transfers. 750mm Capacity. Sawing Capacity: Round cutting capacity(without vertical jaws, angle 0 degrees) 520 mm. Rectangular cutting capacity (without vertical jaw, angle 0 degrees) 700mm X 500 mm. Maximum capacity with vertical jaws 700 X 500 mm. Round cut capacity with 45 degree turn, 450 mm. Rectangular cutting capacity with 45 degree turn, 450 X 500 mm.

Condition: excellent (used), Year of construction: 2008, Voortman V613 / VB750 CNC Drilling / Sawing Line – Year 2008 Rotating Spindle. 19 metres In-Feed. 12.5 metres Out-Feed. Roller Feed. In-Feed Cross Transfers. Out-Feed Cross Transfers. 750mm Section Capacity. Ksdpfsv U Ebwox Ahvedi

Condition: not inspected (used), Maximum working length: 1500 mm Tilting capacity of heads: from −10∘ to +45∘ Swivelling capacity of heads: from −10∘ to +90∘ Kjdpjxz Um Sjfx Ahvjdi Motor power, machining unit: 2×2.25 kW (3 HP) Motor power, drilling unit: 2×2.25 kW (3 HP) Longitudinal movement motor power: 1×2.25 kW (3 HP) Saw blade diameter: 400 mm Saw/drill rotational speed: approx. 3000 rpm CONDITION UNKNOWN – NOT TESTED

Condition: excellent (used), Max workpiece length: 3600 mm Kedpfx Aexvmttshvjdi Min workpiece length: 350 mm Max workpiece width: 200 mm Min workpiece width: 70 mm Max workpiece height: 100 mm Min workpiece height: 25 mm Total machine height: 1900 mm Minimum worktable height: 950 mm Worktable guide length: 4000 mm Worktable guide width: 170 mm Total saw blade unit guide length: 110 mm Max table stroke: 110 mm Max drill head stroke: 150 mm Number of drill spindles: 5 pcs (spacing 32 mm) Saw blade diameter: 350 mm Drill head motor: 2 x 1.5 HP Saw blade motor: 2 x 3 HP

Year of construction: 1977, condition: refurbished (used), I sell the double mitre saw Rapid DGS, year 1977. Tilting heads Kdjdsd N Rb Dspfx Ahvei Drilling front heads on each side included Very good condition. Available immediately.

Condition: ready for operation (used), Technical characteristics Multi-spindle drilling head Pneumatic feed 70 mm / 200 mm stroke Rising cut-off blade flush with carriage, perpendicular to drilling Adjustable carriage Vertical pneumatic press Kjdpfsk Rtinsx Ahvodi Power and Motors Voltage: 380 V Pluging: Three-phased Overall dimensions