Condition: used, Year of construction: 1998, Functionality: fully functional, machine/vehicle number: 201, saw blade diameter: 800 mm, cutting height (max.): 300 mm, cutting width (max.): 550 mm, total length: 2,000 mm, overall weight: 1,000 kg, motor voltage: 400 V, total width: 2,300 mm, total height: 2,000 mm, working height: 940 mm, saw drive: 11,000 W, saw blade bore: 40 mm, operating pressure: 8 bar, Ideal cross-cut saw for the timber trade or sawmills. Solid and robust machine, well suited for beams and laminated beams, for packaged goods but also individual pieces. Can be integrated into a cantilever rack due to its compact frame construction. Saw blade emerges from below, stably guided. Fob Hhceudwzcei Ujgb Safe two-handed operation with large protective hood. Entire machine virtually maintenance-free. Pneumatic clamping cylinders right and left. Completely workshop-tested and ready for use. Saw blade included.

Condition: excellent (used), SCM M2 Febjv Nkico Hhci Ujgb 25 kW engine very good condition.

Condition: used, Edger Saw Weight: 3000 kg, Max cutting height: 800 mm, Max width: 600 mm, Minimal distance between saw blades 55/28, Fgobev Ni Eij Hhci Ueb Max 4 sawblades, Sawing speed 0-50 m/min,

Condition: used, Striebig panel saw type AUTOMAT 6220 AV/XY1/G for cutting panel material made of wood or plastic. Fsboviw Avs Hhci Uegb Technical specifications: on demand cutting height: approx. 2,100 mm cutting length: approx. 5,300 mm

Condition: good (used), Year of construction: 1981, Functionality: fully functional, - pneumatic clamping beam Feb Hov A U Ivjhci Ujgb - cutting length 3000 mm - front support table - rear unloading table with stop - motor 2.2 kW

Condition: ready for operation (used), max blade diameter 550mm Fgsb Hhertqrwoci Ujb automatic setting of arm cutting width max 350mm cutting height max 130mm pneumatic pressure of material year 2006

Condition: good (used), Year of construction: 1998, Functionality: fully functional, machine/vehicle number: 117, saw blade diameter: 800 mm, cutting height (max.): 300 mm, motor voltage: 400 V, saw drive: 15,000 W, operating pressure: 6 bar, Solid and powerful machine for carpentry/timber construction. Longitudinal cuts up to 300 mm cutting height. 800 mm saw blade for a large cross-cutting range, mounted in the turntable. This allows for almost any miter angle. Longitudinal cuts, deburring, grooves, wedge planks - everything is possible. The two-sided feed system easily conveys even large beams through the system. In cross-cutting mode, the feed rams serve as hold-down devices. Two-hand operation for safe operation. With the support integrated into the machine, you have 3 m of roller conveyor on the left and right. The support options can be expanded with tall, stable 3-roller trestles (optional). These are the first pictures. We are currently inspecting and repairing the machine. Fgsb Hov Nktbjhci Uob

Condition: excellent (used), Year of construction: 2008, cutting length (max.): 4,250 mm, cutting height (max.): 80 mm, cutting width (max.): 4,300 mm, main saw diameter: 350 mm, power: 15 kW (20.39 HP), Machine type: fh4 430 HT220 ERB / MCS-Evolution Cutting length: 4.250 mm Cutting width: 4.300 mm Year of construction: 2008 Saw blade projection max .: 95 mm Saw blade diameter max .: 350 mm Main saw motor: 15 kW Scorer aggregate Scorer saw blade diameter max .: 300 mm Automatic cutting length adjustment Scorer aggregate, motor-driven adjustable Package height max .: 80 mm Saw aggregate forward: up to 120 m / min Saw aggregate backward: up to 120 m / min Feeder: up to 80 m / min (Europe: forward 25 m/min acc. EN 1870-13) Number of clamps: 7 pcs grip push clamp Fob Heqi Azpohci Usgb Clamp opening: 90 mm Push-off trolleywith 2 pcs. Push-off devices Book aligning device for longitudinal board edges Strip aligner before and after the pressure beam Air cushion tables: 3 pc(s). 2100 x 600 mm Spindle lift table: - Panel width: 2200 mm - Integrated roller conveyor Feeding roller conveyor: - Length: 4600 mm - Width: 2200 mm - Transport direction longitudinal - Recesses for forklift trucks This machine is in very good conditions and works very well. The machine is reconditioned, checked and tested in our company. Errors and alterations in the technical datas and informations excepted!

Condition: new, Year of construction: 2024, Functionality: fully functional, cutting height (max.): 160 mm, cutting width (max.): 450 mm, cutting length (max.): 6,200 mm, power: 15 kW (20.39 HP), saw blade diameter: 550 mm, total length: 8,100 mm, overall weight: 2,700 kg, height adjustment type: mechanical, type of input current: three-phase, motor voltage: 400 V, frequency: 50 Hz, hole diameter of the disc: 80 mm, extraction nozzle diameter: 160 mm, working height: 850 mm, type of motor: three-phase motor, worktable width: 450 mm, compressed air connection: 6 bar, warranty duration: 12 months, The basic model of the FLS technology is the FLS ECO 120. The saw is mainly used in small and medium-sized operations focused on various wood processing, but also non-wood materials. The FLS ECO 120 single-spindle saw significantly increases work efficiency and material yield (by 10-15%) and can process prisms, beams, prisms and large-area material. The input material can be plastered, dimensioned, formatted, cut to length and slats can be produced. The maximum cutting height is 120 mm, optionally 160 mm. The saw can be operated by one worker. The machine complies with the stringent occupational safety requirements of the relevant EC regulations and directives. The infinitely variable blade feed and stroke control guarantees a clean cut and high cutting performance. Thanks to the "ProLock" quick-release system, saw blade replacement is easy and, above all, safe. The saw carriage is equipped with guide and side rollers that ensure optimal guidance of the floating unit during cutting without unnecessary vibrations. The upper pressure plate and the wooden adjustable stop ensure a firm fixation of the material during cutting and thus eliminate unwanted movement. The FLS technology is unique in its quick and easy adjustment via ergonomically positioned touch panel controls. Cut width values are entered manually or by using the basic Absolut program or the optional Chain and Optim programs. The cutting path is displayed on the material by a laser beam and then guided longitudinally by a sliding saw blade. Foboubbubo Hhci Uegb The FLS can be used to cut prisms, squares, beams and large-area material. The input material can be plastered, dimensioned, formatted, mitred and mitre cut, grooved or cut into sections and slats. Manufacturers of grout and solid furniture or staircases will find their own. The machine can also be used for cutting non-wood materials such as PUR/PIR panels, plastic materials, sandwich, aluminium or cement board.

Condition: excellent (used), SCM Model: SI 6000 Max saw diameter: fi 400mm Fsb Hhcev I Rw Dsi Ujgb Scoring cutter fi 120mm manual adjustment Saw cut 90*/45*:130/92 Aluminum carriage: 3200mm Electric saw lift Electric saw tilt Electronic right guide on precision cnc guides with ball screw Program-controlled Cast auxiliary table on the right and rear side Scoring on parallel guide: 1500mm 2 digital readers on the left guide Touch screen on the upper movable console Suction upper branch Controls for starting the machine on the front of the machine, on the front of the aluminum carriage, and on the upper control console Motor 5.5 kw - 3 saw speeds: 3000/4000/5000rmp Motor of the scoring cutter: 0.75kw - 8500 rpm year production 2006 Ce standard

Condition: as good as new (ex-display), Year of construction: 2025, machine/vehicle number: 3394, - 3700 mm cutting length - milling unit - rear support table - digital position display / adjustment via hand-wheel - gear rack balance on pressure beam - fence - pneumatically adjustable (autom. activated) - Touch panel Fgsbs Ic Rde Hhci Ueb - Front support table, pneum. adjustable - Fence - pneumatically adjustable – 2 steps 600/900 mm

Condition: like new (used), Year of construction: 2021, Functionality: fully functional, saw blade diameter: 600 mm, cutting height (max.): 180 mm, feed length X-axis: 3,200 mm, The KP 900 EasyCut cut-off saw is a suitable solution for companies that process solid wood and place maximum emphasis on the quality and yield of their production. It is used to cut out defects and optimize lengths. On average, up to 900 bm/hour can be processed on this saw. (for material with a length of 4 m with 8 cuts). The saw can be operated by one or two workers, depending on the nature of the processed material. The optimization saw KP 900 EasyCut is suitable for production, which is focused on cutting accuracy, minimization of cargo waste, speed but also safety of work. The advantage of the machine is a high degree of flexibility in the input and output dimensions of the processed material. Controlling the saw is intuitive and special software facilitates programming and entering cutting parameters. KP 900 EasyCut has extended mechanization options at the output. Fgeb Hhcov Iz Rnei Ueb Device functions Length optimization The function consists in minimizing waste and maximizing the yield of the assortment. The inserted material is optically scanned by the binder and automatically precisely laid out on the cross-section of the specified lengths of the selected program. The optimization system then always prioritizes the cut of the longest specified length that fits into the inserted material. The saw automatically measures the length of each inserted piece, so it is not necessary to sort the material in advance by size. In the case of marked defects, the material is optically divided into individual pieces by the binder (from defect to defect) and these pieces are again separately optimized for length. If the cut part does not meet the length of the smallest length in the program, it goes to waste. Automatic front and back cropping can be set in the selected program. Qualitative optimization - waste The essence of this function is that the operator performs a visual assessment of the cut piece and marks with two perpendicular lines the places with defects that must be cut out with special chalk. By moving the binder with special optics over the cut material, the current positions (chalk strokes) of the necessary cuts are recorded. The resulting parts in different lengths (from defect to defect) are automatically length-optimized and cut to the required lengths using the software according to the cutting program. If the cut part does not meet the length of the smallest length in the program, it goes to waste. Automatic front and back cropping can be set in the selected program. Solid and massive construction with a robust cover of the cutting area guarantees high work safety. Quality of individual components, material and processing ensures trouble-free operation of the equipment and a long service life in demanding working conditions. Material flow In the basic design, the saw is LEFT oriented, i.e. material flow is from right to left. Automatic loading system is a combination of sophisticated printing equipment and optics. The system is an integral part of the entrance table. It moves along a precise linear rail with bearings and ensures very precise positioning of the workpiece in the cut (up to ±0.1 mm). Thanks to the optical integrated system, the loader reads the length of the material, marked defects and quality. Clear touch 15" display

Condition: good (used), Year of construction: 2008, Functionality: fully functional, Machinery Hydraulic Pumps Fgob Hev Iy Ixohci Usb 2 x 10 t each 2 x 5 t Used Payment before delivery

Condition: used, Panhans format saw 320cm carriage on bars up-down and angle saw adjustment hydraulically Fsb Hhcev Iqp Hei Ujgb 5.5KW main engine undercutter on a separate engine 3 cutting speeds max. 400mm discs machine in good working order, ready for testing

Condition: new, Year of construction: 2024, Functionality: fully functional, power: 11 kW (14.96 HP), saw blade diameter: 600 mm, feed length X-axis: 6,200 mm, overall weight: 2,300 kg, height adjustment type: pneumatic, type of input current: three-phase, motor voltage: 400 V, frequency: 50 Hz, hole diameter of the disc: 80 mm, extraction nozzle diameter: 120 mm, working height: 900 mm, type of motor: three-phase motor, compressed air connection: 6 bar, warranty duration: 12 months, The KP 900 Automat is a suitable solution for material preparation in the production of pallets and other wooden packaging products. On average, this saw can process 27-30 m3 of pallet cross-section per shift (8 hours) or about 20 thousand pieces of blocks for pallet production, depending on the cross-sectional dimensions of the processed material. The saw can be operated by one or two workers, depending on the nature of the material being processed, which is manually loaded into the machine. Fgjb Hhcioubbtkj Uob Basic cutting modes 1. Manual mode Each cut length is set by moving the material using the buttons on the panel, or by setting the length value on the control panel dial. Start the cut by pressing the button on the display. This method of use is suitable for single sequential cuts. 2. Automatic mode a) Set one cut dimension for the entire length of the input material. When the pedal starts cutting, the entire material is automatically cut to this set value. When the cut is complete, the loader will go back to the preset value of the input material length. This mode is suitable for the production of pallet cubes. The advantage is the quick changeover between values when the input material changes frequently. b) Set the desired combination of cut dimensions for the entire length of the input material. When the pedal starts cutting, the entire material is automatically cut to these length combinations. When the cut is complete, the loader will go back to the preset value of the input material length. Up to 10 programs with 10 lengths can be stored in the machine memory. Programs are very easy to overwrite, edit, insert or delete. Use this mode to achieve high material yields and is particularly useful in the production of cuttings for a wide range of packaging products. In automatic mode, automatic front and back trimming can be set. In the basic version, the saw is LEFT orientation, i.e. the material flow is from right to left. An automatic loading system is included in the basic configuration of the saw. It is a pusher device that moves on a precision linear rail with bearings. This design ensures long life of the linear guide and very precise positioning of the workpiece in the cut. The integrated side and top pressure ensure a firm fixation of the material during the cutting process, both to the work table and to the back support. This ensures that the cut is always precise, perpendicular and avoids unwanted material movement. The clear LCD touch screen allows easy and comfortable operation of the machine. The individual controls are clearly visible, do not tire the operator's eyes and provide a perfect overview. Maximum ergonomics and designed software ensure the operator complete control over the machine. A work table at the infeed before the cut allows the operator to conveniently sort and prepare the material, which is then moved to the loading area. This eliminates downtime in the operation of the saw and strenuous material handling. The table has a tilt of 8° and is equipped with a safety flap at its end to prevent accidental pushing of the material out of the operator's reach. The basic fixed table at the outlet behind the cut is two metres long and partly under the cutting area cover. The operator can remove the cut material in complete safety, without being endangered by any cuttings, chips or risk of injury from the cutting wheel. The inclination of the table is 8°.

Condition: excellent (used), Circular saw flat motor KATT 11 kW / 1450 rpm, flange Ø 200 mm, right-hand thread, second stub shaft for hydraulic pump drive with pulley 150 mm Ø, tested and with new bearings. Fgjb Hoh D Rt Ajhci Ueb

Condition: new, Year of construction: 2025, + with automatic feeding + intuitive operation via Touchscreen + saw unit 2.2 kW (3 PS) - invinitely variable height-adjustable on two high precision ball-rail-systems + milling unit 1.1 kW (1.5 PS) - invinitely variable height-adjustable on two high precision ball-rail-systems + cutting and milling height 45 mm + saw- and milling unit can be lifted and lowered pneumatically Fjb Hhebnu T Asci Uegb + front support table pneumatically adjustable - width of support: 230 mm + guiding of the saw- and millingunit via of two high precision ball-rail-systems + central lubrication points for the simple and complete maintenance of the guiding carriage + pneumatic axial saw blade adjustment, 0 – 2 mm infinitely variable + electromotoric feed of the saw- and millingunit, (2 – 20 m/min infinitely variable) in self-holding contact + swivel switch console with rotating operating console + transparent lamella cover protects the cutting area + area of the saw and milling unit is totally fenced in metal sheets in front and at the side + power supply in cable duct with plastic link track + chipping device up to 25 mm + safety equipment

Condition: used, 900mm steering wheels 18.5kw motor Fgobsv Aub Aj Hhci Uob Voltage 380V

Condition: used, Year of construction: 1998, SECOND-HAND CIRCULAR SAW CASADEI MOD. KS 3400 - CE RULES - Carriage mm. 3400 - KW 7.5 - SN 98-36-014 - Year 1998 Fgob Hhorwxqyeci Ueb

Condition: used, Year of construction: 1998, machine/vehicle number: 5363, Nutzbare Schnittlänge : 4200 mm Schnitttiefe : 4200 mm Sägeblattüberstand : 105 mm Fgsb Hhceuf Hxyji Uob Anzahl Spannzangen : 7 Stk Leistung Motor Hauptspindel : 9 kW Durchmesser Hauptsägeblatt : 355 mm Durchmesser Vorritzsägeblatt : 127 mm Vorschubgeschw. Sägewagen Vorlauf : 5-60 m/min Vorschubgeschw. Sägewagen Rücklauf : 80 m/min Seitenausrichter : ja Stk Vorschub Schieber : 25 m/min Rücklauf Schieber : 60 m/min Steuerung : Steuerungsrechner Anzahl Auflagetische : 4 Stk Ausführung Auflagetisch : Luftkissen

Condition: excellent (used), Socomec band saw Roll diameter 700 mm APA precision guide top and bottom Fgjbjuumyde Hhci Uob Table size 700 x 930 mm pivoting Cutting height 430 mm Cutting width 670 mm Weight 420 kg Condition very good Price 1800.-

Condition: excellent (used), Functionality: fully functional, saw blade diameter: 700 mm, saw drive: 7,500 W, operating pressure: 6 bar, disc diameter: 700 mm, Large size carpenter industrial cutting circular saw. Powerful engine: 7,5Kw. 380V. Fgeb Hhcov Ic Iuei Usb Forward and backward movement is pneumatic. Height adjustment is electric. La diameter: 700mm.

Condition: as good as new (ex-display), Year of construction: 2021, operating hours: 6 h, Functionality: fully functional, saw blade diameter: 350 mm, power: 0.003 kW (0.00 HP), with 2 1 m roller tables 1 HM circular saw blade with CE protective cover Fgjb Hhjtq Efhsci Usb Technical data: TR 350 Motor power (kW): 3 Speed (rpm): 3000 Max. saw blade diameter (mm): 350 max. drill diameter (mm): 30 Maximum cutting capacity (mm): 160x80-220x30 Diameter of suction pipe (mm): 2x80 Net weight: 150 kg

Condition: used, Year of construction: 1991, machine/vehicle number: 20544, max. Schnittbreite : 5300 mm max. Schnitthöhe hor. : 2100 mm Fgebjucam Eo Hhci Ueb max. Schnitthöhe vert. : 2200 mm max. Bearbeitungsdicke : 80 mm Sägeblattdurchmesser : 300 mm Sägeblattbohrung : 30 mm Auflage unten : Rollen starr Materialauflage : Holzlattung ausweichend Kleinteilauflage : Nein Messsystem : Skala Schwenkung Sägekopf : manuell Sägevorschub : manuell Befestigung : freistehend Absaugung : externe Absaugung Motorleistung : 4 kW Absaugdurchmesser : 120 mm Digitale Maßanzeige in X und Y Richtung. Motorbremse neu nachgerüstet - BG freundlich.

Condition: used, Year of construction: 2004, machine/vehicle number: 04140128, max. Schnittbreite : 4200 mm max. Schnitthöhe hor. : 2080 mm max. Schnitthöhe vert. : 2200 mm max. Bearbeitungsdicke : 60 mm Sägeblattdurchmesser : 250 mm Sägeblattbohrung : 30 mm Auflage unten : fest, mit absenkbaren Rollen Materialauflage : Kunststofflattung ausweichend Kleinteilauflage : Ja Messsystem : Skala Fgjbevnw Nmj Hhci Uob Schwenkung Sägekopf : manuell Befestigung : freistehend Gewicht ca. : 450 kg Motorleistung : 3 kW Absaugdurchmesser : 100 mm