Condition: ready for operation (used), Year of construction: 1993, Functionality: fully functional, 1 complete automatic trimming system Paul 1 used Paul AB920 automatic feeding system consisting of: Fgslqxroulikmelajb Transfer table with 1.1 m stroke; 6 m roller table; 9-strand conveyor chain drive Measuring device with 16 measuring points via measuring skids • NCD control and control cabinet • Control of the automatic feeding system and the BK/1000 with a saw blade adjustment Selectable: sharp edge / low wane / high wane - alignment centered or along the rear wane • Trimming grid: 48, 60, 80, 100, 120, 140 mm; • 150-400 mm in 1 cm increments • Single-track trimming with manual input of the trimming width 1 used Double Edger BK/1000L Max. cutting height: 125 mm • Feed with dual gear motor • Divided top roller • Hydraulic sawblade adjustment • Motor: 22 kW, 380 V, 50 Hz, 2900 rpm • Motor clamping rails • Fixed riving knife • Splinter separator 865 mm / 6.30 m long with fixed cutting blade and rising tooth chain for max. log length: 5.50 m • Total connected load of the system: 35 kW Saw shaft with new bearings

Year of construction: 2024, Condition: new, Functionality: fully functional, machine/vehicle number: C350, cutting gripper Fgjlqov Icp Ssxrlajb

Condition: used, Engine power: 9.5 PS/HP (7.0 kW), year of manufacture: 2018, cutting height (mm): 136 mm, circular saw pivoting: 0 46 degrees, circular saw blade Ø max.: 400 mm, scoring saw Ø: 160 mm, sliding carriage 3200 mm, motorized parallel stop, control panel at eye level, digital display on ruler, Compex length compensation Fslqxrjvwl Amjlajgb

Condition: good (used), Year of construction: 1993, Mitre saw, saw unit right left, double mitre saw, crosscut and mitre saw, double end tenoner Fgelqotxkproxrlaob -Manufacturer: Emmegi, Pressta Eisele, double mitre saw type SINGLE 2 HM500 -Cutting length: 250 to 5000 mm -Saw units: 45° pivotable -Saw blade: Ø 500 mm -Cutting data 90°: Cutting height 350 mm Cutting width 160 mm -Cutting data 45°: Cutting height 260 mm Cutting width 125 mm -Dimensions: 5750/1220/H1700 mm -Weight: 1200 kg

Condition: excellent (used), Robland 3200 silver line format saw with a trolley Fslqxrev S Hy Aolaegb scoring saw with a separate engine, trolley length 320cm main engine 7KW 3 speeds max disc 450mm 0-45 tilt electrically adjustable with readout up-down saw electrically adjustable without readout culaga on the right side motorically adjustable up to 1240mm digital readers on the culaga on the trolley angle device included Branded machine in very good condition,

Condition: excellent (used), Year of construction: 1997, For sale is an Altendorf sliding table saw in very good condition. The saw can be inspected and tested on site. About the machine: Fslqxrjv Syb Hjlajgb - Sliding table 2800mm - Parallel stop 1050mm - Boom up to 3250mm - Height and tilt adjustment via foot pedal - Electronic tilt display - Year of manufacture 1997 - Max. 450mm saw blade - Scoring unit: no - Motor power 5.5kW Accessories: Miter gauge, 2nd saw guard, supports, tools, spare parts. You will receive a VAT invoice.

Condition: good (used), 11kW motor Fully operational Fgslqxor A Aqlorlaeb

Condition: ready for operation (used), operating hours: 2,500 h, total length: 12,000 mm, net weight: 3,500 kg, Hello, I am selling a Lignuma band saw, cutting length 9.5 m, good condition, the saw includes a sharpener and additional saws. The machine is ready to work. Fgslqxrlev Svhceasb

Year of construction: 2002, Condition: ready for operation (used), A vertical panel saw GMC including a small and mobile extraction unit Kemper is available. Cutting dimensions X/Y/Z: 4200mm/2100mm/50mm, max. horizontal cutting height: 1950mm, saw blade outer diameter min./max.: 240/250mm, saw blade inner diameter: 20mm, saw blade speed: 5200rpm, motor power: 3kW, weight: approx. 500kg. Extraction unit Kemper 64100, year of manufacture: 2009, volume flow: 1200m³/h, weight: approx. 80kg. Documentation available. On-site inspection is possible. Fgolqxrov Sufmolaob

Condition: excellent (used), Year of construction: 2011, operating hours: 20,000 h, Functionality: fully functional, cutting length (max.): 4,300 mm, cutting width (max.): 4,300 mm, HOLZMA HPP 350/43/43 from 2011 The machine is 100% efficient, dismantled and ready for transport. The machine has worked 20 thousand mth Complete documentation for the machine. Fgslqxrlevzxa Tjaeb We provide a start-up WARRANTY!! Possible transport

Condition: good (used), Year of construction: 2016, Casolin Astra 400 Sliding Table Saw 320cm carriage motorically adjustable blade tilt and top/bottom motorically adjustable blade on the right side up to 1300mm 2-axis scoring saw, electrically adjustable 120mm scoring saw 7.5KW engine, 3 cutting speeds max. 400mm blades Folqxrlsu Ekhnsajgb angle-bent carriage with angle display used machine, good condition, holds angles and fulfills its functions

Condition: new, Functionality: fully functional, Notch cutting machine. The Morso-NFXL is a foot operated notch cutting machine for cutting window bars, mullions and cabinet front frames requiring haunch joints. The NFXL leaves the cut surface of the wood perfectly smooth and accurate, requiring no further preparation before joining. The horizontal movement of the knife block is step adjustable . The fences, left and right, with the adjustable stops ensure correct work. The special lever system of the machines ensures a very easy operation. Twin return springs automatically bring the knives back to starting position. Maximum width of the wood 200 mm To compare MORSO-NFX with a routing machine the following points must be considered:- 1. A cleaner and more constantly accurate cut will be produced with the Morso-NFX, therefore no further preperation for the joining. 2. The Morso-NFX produces NO DUST, and therefore requires no extraction. 3. The Morso-NFXL requires less than 15 minutes to change the cutting blades, to the set-up, and to the positioning of the stops. Fjlqxrlsv Snuzoasgb 4. As the blades wear, the 45deg. angle remains unchanged, ensuring consistently accurate joints. The Morso-NFXL cuts plastic, all kinds of wood including MDF. Morso-NFXL is delivered with safety guard, waste chute, 6 sliding longitudinal stops, fences 1000 mm on both the right and left side of the machine, 2 nose knifes (chip breaker) 18 et 26 mm, 2 pairs side knives.

Condition: good (used), - power supply - 230 V - motor power - 0,92 kW, 1,25 HP - rotational speed - 2850 rpm - blade diameter - 250 mm Foljr A Anqsqxrlaogb - disc bore diameter - 30 mm - shield for the disc - cutting height - approx. 70 mm - cutting width - approx. 440 mm - arm length - approx. 660 mm - arm angle adjustment +/- 90° - blade angle adjustment 0°-90° - arm height adjustment - blade adjustment in vertical axis +/- 90° NO DISCS FOR DISCS

Condition: used, Year of construction: 2001, No. 04450 Bandsaw MAKA HB 500 Used, year of construction 2001 Roller diameter 500 mm Table dimensions 680 x 515 mm LW Cutting capacity 300 x 480 mm HW Roll width 35 mm Blade length 3950 mm Motor power 1.5 kW Heavy steel box-form construction, balanced cast wheels APA roller precision guides Work table can be tilted up to 20° Fgjlqxevn Tl Dsrlaob Machine mobile Transport dimensions approx. 1200 x 800 x 2000 mm LWH Weight approx. 300 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical data, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse or location

Condition: new, cutting diameter 300 mm capacity 90 degrees: flat 330 x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: flat 270 x 200 mm capacity 45 degrees: round 250 mm capacity 45 degrees: square 250 x 250 mm capacity 60 degrees: flat 170 x 170 mm capacity 60 degrees: square 170 x 170 mm Fgslqjvixkzoxrlaob capacity 60 degrees: round 180 mm turning speed range: 40 / 80 m/min saw band length 3650 x 27 x 0,9 mm weight of the machine ca. 640 kg Equipment: - robust electro-hydraulic band saw (INDUSTRY) - large bearing-mounted rotary table * for miter cuts from 45° right to 60° left - automatic saw bow lowering * with continuously adjustable feed * limit switch at the end of the cut - manual cutting function selectable - saw band guide made of hard metal plates - 1x saw band - 1x angle stop - moving chip removal brush - control panel - front right - hydraulic pressure box for saw band tension * with analogue pressure display (manometer) - machine base frame with forklift pockets - coolant system - operating instructions in German

Condition: new, Spindle diameter 90 mm Diameter of sawblades 255 mm Cutting width 1600 mm Cutting height 0-50 mm Motor power 37 kW Speed 2800 r/min Feed speed 0-15 m/min. Feeding motor 3 kW Delivery term: ~ 3 months. Fjled Nluwoqxrlaogb

Condition: good (used), Felder format saw with carriage scoring saw with separate engine, carriage length 320cm 0-45 tilt electrically adjustable with readout up-down saw electrically adjustable with readout culaga on the right side manually adjustable up to 1270mm main engine 5.5KW 3 cutting speeds max disc 350mm scoring saw diameter 120mm, hole 20mm Branded machine, technically fully functional, will still fulfill its functions well Fjlqxev Srq Hsrlasgb

Condition: excellent (used), Hoffmann MS35-SF double miter saw Cutting at an angle of 45° Saw motor 2×1.8kw Saw rotation speed 3000r.p.m Feljv Hnnwoqxrlasgb Saw size 350mm hole 30mm Working width max 80mm Working height max 80mm Milling units for dovetail 2×0.5kw Milling machine rotation speed 19,000r.p.m Possibility of setting two milling positions Working pressure 6bar CE certificate Extraction nozzles 2x120mm DTR documentation Weight about 800kg Total dimensions of the machine with tables 520x92x170cmH

Condition: good (used), wheels diameter 800mm dimensions of table top 1100x800mm Fgjlqxrer A Anielasb worktop adjustable at an angle motor 3kW max cutting height 420mm overhang of the belt - body 750mm

Condition: used, Single blade saw 150mm carpet Maximum passage height 80mm Fgelqov Hmrzoxrlaob 9kw motor Service keys

Year of construction: 2023, Condition: new, Radial Band Saw Fgolqxrlombbivoaob

Condition: new, Type 800 Motor power 4.5 kW, 1450 rpm Blade length 5611 mm Blade width 19-50 mm Blade speed 18 m/s Fgolqed Av Duoxrlasb Throat / max. cutting width 800 mm Max cutting height 470 mm Table dimentions 840 x 500 mm Tilting table 0°- 45° Dust port diameter 2 x 100mm

Condition: used, Rema type DMGB-35 double cross-cut saw including discharge conveyor belt for cutting wood to length on both sides. This machine was used specifically to cut doors to size. In its current state, the cutting length is limited to 1,000 mm, but can be extended. tape length: approx. 1,700 mm + 2,700 mm Fgjljv Hgb Neqxrlasb cutting width: max. 2,500 mm cutting height: max. approx. 80 mm

Condition: new, Type 500 Motor power 3 kW, 1450 rpm Blade length 4100 mm Blade width 19~38 mm Blade speed 18 m/s Throat / max. cutting width 500 mm Fgjlqedzttajxrlajb Max cutting height 350 mm Table dimentions 730 x 480 mm Tilting table 0°~ 45° Dust port diameter 2 x 100mm

Condition: new, Type 600 Motor power 3.5 kW, 1450 rpm Blade length 4590 mm Fgjlqxrsdzttfjlaeb Blade width 19~38 mm Blade speed 18 m/s Throat / max. cutting width 600 mm Max cutting height 430 mm Table dimentions 780 x 480 mm Tilting table 0°~ 45° Dust port diameter 2 x 100mm