Panel saw

HOLZMA HPP 350/43/43

Condition: used, Year of construction: 2005, functionality: fully functional, Manufacturer: HOLZMA Model: OPT HPP 350/43/43/X Machine type: Beamsaw Year of manufacture: 2008 Chedpfx Ajxwwfvsb Tef Operating status: still connected Cutting length 4.300 mm Width of lifting table 2.200 mm Number of grippers 8 Feedrate max 150 m/min Saw blade projection 80 mm Saw blade diameter max 350 mm Scoring saw Yes Labelling manually Lift table loading from behind Stop side Right side HOLZMA | HOMAG Machine table with air nozzles throughout Control HOLZMA CADMATIC 4.1 Declaration of CE-conformity Conformity marking CE mark Space requirement Length 8,2 m Space requirement Width 6,5 m

Condition: used, No. 04485 Veneer press Ott JU 2513 Used Electrically heated heating plates Hydraulic pressing pressure Aluminum heating plates Plate dimensions 2550 x 1350 mm LW BUSSE heating plates renewed in 2019 and covered with Mylar film 4 hydraulic cylinders each 90 mm diameter Total pressing pressure 90 tons Specific pressing pressure 2.8 - 4.0 kg/cm2 Button control for closing / opening / stop Emergency stop rip cord Opening width 400 mm Total power 19 kW Stable construction with 3 longitudinal beams in the upper part of the press and 2 longitudinal beams in the press table Transport dimensions approx. 2900 x 1500 x 2000 mm LWH Weight approx. 4200 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Chjdpew Npbzsfx Ab Tef Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: used, machine/vehicle number: 007734, X axis working area: 3050 mm Y axis working area: 850 mm Main Electrospindle power: 5 KW Codpfx Abjw Idb Ho Tehf Total number of drilling spindles: 19

Condition: excellent (used), SINGLE-SIDE EDGE BANDER (LEFT-side) Edges (band in rolls) thickness (Min/Max) mm 0,3 - 3 Edges thickness in stips / lippings (min/max) mm 3 - 12 Panels thickness (min/max) mm 8 - 60 Numerical Control ICOS open TS Feeding speed (adjustable) m/min 4 - 20 Top pressure system with rubber belt Spraying unit (Anti-sticking liquid) Pre-milling Unit (vertical joint trimmers) 08.376 (2 x Kw 3) Glueing Unit (Hot Melt Glue) 283.1513 Band Pressure zone Edge coils supporting unit (reels N°) 1 Snipping (end-cutting) unit 08.415 (2 x Kw 0,66) Fine Trimming unit 08.055 (2 x Kw 1) 0°-30° Multi Function Unit (Profile contour Trimming unit) 08.342 (2 x Kw 0,66) servo Profile edge scraping unit 08.519 Cjdpsd Nuu Hofx Ab Tehf Glue scraping unit 08.50 Buffing unit 08.612 (2 x Kw 0,25) Free space

Condition: used, machine/vehicle number: 007134, Type of edging: Thin edge, Thick edge, Solid wood Chedpfxjt Hmtze Ab Tjf Gluing System: EVA Hotmelt, Hot Air Premilling Unit: yes Corner Rounding Unit: yes Grooving Unit: yes Max feed speed: 25 m/min Maximum panel thickness: 60 mm Operating Units: 10 nr

Year of construction: 2008, condition: used, Panel return system for use with a single edgebander The panel is transported towards the operator via a motorized belt and a roller\belt table. Moeller mini control Maximum panel dimensions 2500 x 1450 mm Maximum panel height 60 mm Working speed 8 - 25 m\min Cjdjrxzb Rjpfx Ab Tohf Working height from the ground 835 - 960 mm

Year of construction: 2010, condition: used, Panel return system for use with a single edgebander The panel is transported towards the operator via a motorized belt and a roller\belt table. Moeller mini control Maximum panel dimensions 2500 x 1450 mm Cedpferq Dmrjx Ab Tshf Maximum panel height 60 mm Working speed 8 - 25 m\min Working height from the ground 835 - 960 mm

Condition: excellent (used), Year of construction: 2022, Specification: Vertical Drill Block with 13 Spindles Horizontal drill block with 4 spindles in the X Cedpfx Ajwtpu Djb Tehf Horizontal drill block with 2 spindles in the Y Grooving Saw D=100mm Plausibility check 10kw tool change spindle 4 position tool changer Workpiece length max 200-3050mm Workpiece width 70-850mm Workpiece thickness 8-56mm Powertouch screen Woodwop for machine CNC 3D Simulation for the machine Energy Saving Mode

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 9914346, 3-axis CNC + 1-axis pneumatically controlled floor type vertical machining center 3 axes (X, Y, Z) controlled by CNC + 1 axis controlled pneumatically. Suitable for processing aluminum and PVC profiles. The workpieces are clamped by 4 pneumatic clamps, moved on a tilting beam; this beam has a rotation range of ± 90 ° with pneumatic control. Working cross-section: 200 x 170 mm (YxZ). Chedswgm Sgjpfx Ab Tsf View specifications X-axis stroke mm 3160 X-axis positioning speed m/min 60 Y-axis stroke mm 360 Y-axis positioning speed m/min 30 Z-axis stroke mm 345 Z-axis positioning speed m/min 30 A-axis stroke ° 45 - 90 - 45 Electric spindle power kW 3.8 Tool holder taper ISO30 Maximum rotation speed rpm 18000 Cooling system Air Weight kg 1800

Condition: used, machine/vehicle number: 007601, X axis working area: 4320 mm Y axis working area: 2245 mm Working Table: Flat table Main Electrospindle power: 9 KW Cedpfx Abju N Skfs Tehf Number of controlled axes: 3 axes Total number of drilling spindles: 16 Total number of tool changer positions: 8