Condition: excellent (used), Brevetti Junior 250 double frame saw Cutting width max 60mm Cutting height max 60mm Cutting at an angle of 45° Max saw size 250mm Cutting cycle up and down Dob Eewdw Tvs Nl H Nokl Smooth saw feed adjustment Motor power 2×1.5kw Extraction nozzles 2x 100mm

Condition: good (used), Code: 0264 Brand: MARTIN - GERMANY Model: T 72/A AUTOMATIK - CE Standard 4-axis controlled panel saw with scoring unit for cutting wood panels, furniture, customised furniture, plastics, coatings, aluminium, etc. - CE Standard Technical data: Aluminium squaring carriage length mm 3700 Max blade diameter mm 500 F30 Cutting height mm 170 Cutting width mm 1250 Motor power Kw 7,5 N° 3 speeds rpm 2800/4000/5500 Blade inclination 0-45,5° Parallelogram cross table tilting from 2 sides, with Led display Parallelogram transverse table extension 4 Controlled axis : Blade lifting - Blade tilting - Parallel guide - Reference stop 3-axis electrically controlled scoring unit Dkob E Nowdxk Asl H Nsl Motor Kw 0,75 Blade diameter mm 120 F22 Electric adjustment guard Clamping device for small parts "BESAUMFIX" Compressed air 6-7 bar Suction base diameter 120 mm Suction guard diameter 100 mm Overall dimensions of assembled machine mm 3700 x 2100 x 1600 h Overall dimensions for transport : mm 3900 x 2200 x 1600 h Weight kg 1800

Condition: new, band saw according to CE and with the following features Debsdibw Ae E Nl H Nskl strong cast iron work table, inclinable balanced cast iron fly wheels saw blade guide, telescopic saw blade tensioning indication upper and lower saw blade guide cleaning brush for the lower fly wheel sturdy AL fences max saw blade width 16 mm suction connection under the table micro switches on machine doors work table dimensions 600 x 520 mm working table height 900 mm fly wheel DM 450 mm fly wheel speed 700 U/ min max cutting height 300 mm max cutting width 440 mm min/ max saw blade length 3690/ 3742 mm min/ max saw blade dimension 6 x 0,5 / 25 x 0,5 mm motor 3,0 kW, 3 Ph 50 Hz, 400 V suction connection 120 mm

Condition: reconditioned (used), Cutting height: 140 mm Cutting length: 5000 mm Dobjwgkiij E Nl H Nekl Cutting width: 400 mm Saw blade cannot be lowered Motor power: 7.5 kW / 400 V Ready for operation, ex service Free shipping

Condition: like new (used), Milling machine format saw like new condition 3.2m trolley Scoring machine Djb E Nlewgi Svs H Nekl

Condition: used, Year of construction: 1980, Partially overhauled, fully adjusted With completely new control/circuit board Main switch Brake device with automatic star-delta start Emergency stop button Used, good condition Brand Altendorf Deb E Nlov Tqrfo H Njkl Type F45 Year of manufacture 1980 Machine no. 80-8-35 GS-tested Motor 5.5 kW Carriage length approx. 2800 mm Cutting width approx. 1200 mm Pivotable up to 45° Parallelogram guard Single miter stop Extraction connection D 80 and 120 mm Space required approx. 2800 mm x 1600 mm x 1500 mm Weight approx. 1000 kg Storage location 97447 Gerolzhofen, free on load, unpacked Handed over in as-is condition, as seen, without guarantee or warranty

Condition: excellent (used), SCM M3 multisaw track width 300mm Dob E Nlswgiqxe H Nekl max cutting height 120mm 37KW engine track feed smoothly adjustable central lubrication track in good condition machine ready to work,

Condition: good (used), Year of construction: 1990, operating hours: 2,500 h, Functionality: fully functional, cutting height (max.): 350 mm, total length: 6,500 mm, Hello, I am selling a Schumacher 35/2S line, good condition, the machine was used in a small plant, good condition, electrics and mechanics ok, the machine is ready to work, material length max 6500mm Dkeb E Nev Nzu Nol H Njl

Condition: new, SCM gabbiani p90 panel dividing saw - exhibition machine - special price! Technical data: Saw blade projection mm 90 Worktable height mm 950 Number of collets 5 as standard CUTTING DIMENSIONS mm 3300 x 3200 Variable saw carriage speed m/min 6 - 60 Variable pusher speed m/min 0 - 60 Saw blade motor power kW 7.0 Speed rpm 4650 Saw blade diameter mm 340 Saw shaft diameter of main saw blade mm 80 Scoring motor power kW 1.5 Speed rpm 5850 Scoring blade diameter mm 200 Scoring blade shaft diameter mm 80 Compressed air requirement NL/min 300 Compressed air bar 7.0 Extraction air requirement m3/h 2440 Extraction air speed m/sec 20 Suction nozzle diameter mm 4x120 including the following options: 590134 Cutting depth 3200 mm (version 33) OF0263 eye-M control panel with integrated PC 590261 Cut editor OF0454 Maestro pattern 590271 Maestro connect: preparation without "gateway" for subsequent installation OF0457 Human-machine interface software (HMI) MAESTRO ACTIVE 590258 Rear table with castors, on the side of the longitudinal stop 590246 Fixed air cushion table 2500x800 mm with castors and reinforced fan 590239 2 x movable air cushion table 1500x600 mm with castors and reinforced fan 590244 Saw carriage with independent stroke control of the saw and scoring saw blade 590245 Optimized vertical stroke of the saw blade on 2 levels (medium/maximum) 590143 Device for grooves with manual height adjustment of the saw blade 590241 Execution of grooves (feed/return of the saw carriage) 590164 Double lateral automatic aligner 301230 Foot switch for starting and stopping the work cycle 590044 Compact labeling unit - printing of labels with barcode 590144 4 x additional clamps 900088 Magnetic tape monitoring of the pusher position Djb E Nlsiz A Ams H Nekl 102015 European safety regulations (CE mark) 109993 MACHINE LANGUAGE: German

Condition: good (used), Cutting area approx. 5200 x 2100 mm Manual feed Automatic deflection grate Cutting depth 70/80 mm Dkob E Nl Hjwduamj Nel Further technical data available upon request

Condition: refurbished (used), Hydraulic variator, e.g. for the feed drive of a PRIMULTINI band saw clamping carriage, including brand-new drive motor 5.5 kW/1440 rpm, individual, manual rapid feed adjustment forwards/backwards including by-pass valve for smooth reversing when accelerating and braking the clamping carriage, with ATOS electric solenoid valve for fast and safe feed-off switching, with 280 mm Ø V-belt pulley Deb Eelyqbbs Nl H Nokl

Condition: used, Year of construction: 2024, machine/vehicle number: L24100210, Neue Ausstellungsmaschine! Besonders schwere Ausführung mit hohem Eigengewicht für maximale Laufruhe • Besonders ruhiger und präziser Lauf dank verwindungssteifem Maschinengehäuse • Großer Guss-Parallelanschlag mit Rundstangenführung, leicht verschiebbar • Guss-Schwungräder mit Gummibelag und Reinigungsbürste •Großer Grauguss-Sägetisch, schwenkbar mit geschliffener und polierter Oberfläche • Präzise Schnitthöhenverstellung über Zahnstange mit Millimeterskala • Endschaltergesicherte Türen • Selbstbremsender Motor • Zwei Absaugstutzen Techn. Daten: Abmessungen Tisch (L x B x H) 720 x 520 x 860 mm Schnittgeschwindigkeit 1.650 m/min Gewicht ca. 240 kg Schnitthöhe max. 350 mm Schnittbreite max. 520 mm Sägeblattlänge max. 4.260 mm Sägeblattstärke min./max. 0,5 / 0,6 mm Präzisionsführung oben / unten Sägetischneigung 0 - 20 ° Dksb Ejwggako Nl H Njl Abmessungen (L x B x H) 870x 620 x 1970 mm

Condition: ready for operation (used), total height: 3,020 mm, total length: 3,300 mm, throat depth: 1,060 mm, total depth: 5,100 mm, zware dubbelkoloms lintzaag voor het zagen van hooggelegeerde staalsoorten automatische invoer van het werkstuk met automatische herpositionering CNC-gestuurde variabele snelheid voor invoer en zagen spaantransportband uitgerust met volledig gemotoriseerde Weisshaupt-rollenbanen: - 10,3 meter invoerrollenbaan (buiten) met 2 hydraulische klemmen voor het uitlijnen van het werkstuk - 9 meter invoerrollenbaan (binnen) met 2 hydraulische klemmen voor het uitlijnen van het werkstuk - maximale werkstukbreedte: 900 mm - elke rol is gemotoriseerd - de capaciteit van één rol is 4 ton - 4 meter uitvoerrollenbaan: één rollenbaan is uitgerust met een weegschaal om het werkstuk na het snijden te wegen (Sartorius-systeem) Max height of workpiece: 860 mm Dob E Nlev Sfp Ao H Njkl Sawspeed: 16 > 80 m/min Length of band saw: 10260 x 80 x 1,60 mm Power needed: 32 kW (100 amp) Weight: 9 ton (only machine)

Condition: excellent (used), Year of construction: 2008, operating hours: 697 h, Functionality: fully functional, cutting width (max.): 6,000 mm, cutting width at rip fence: 1,350 mm, cutting height (max.): 170 mm, saw blade diameter: 500 mm, table length: 3,000 mm, height adjustment type: electric, overall weight: 1,900 kg, type of motor: three-phase motor, slide length: 3,000 mm, rotational speed (min.): 2,800 rpm, rotational speed (max.): 5,500 rpm, type of input current: three-phase, input voltage: 400 V, pivoting range: 46 °, motor voltage: 400 V, power: 7.5 kW (10.20 HP), Equipment: motor brake, Selling a very well-maintained Martin T 74 classic sliding table saw. Price net plus VAT. Available approximately in 3 months at the beginning of August, once the new Martin T 77 is delivered. The following features: Digital display with tool management 7.5 kW motor Programmable parallel stop 3 m smooth-running edging table Parallelogram cross table with 2 digital stops Extension table 800 mm Electrically driven parallel stop, lowerable 1350 mm Central lubrication 3 speeds for saw blades up to 500 mm Djb E Nswgfuasl H Nekl Motorized tilt adjustment from 0 to 46° Motorized saw blade height adjustment Max. cutting height with 500 mm saw blade: 170 mm Operating hours: see image: 697 hours

Condition: reconditioned (used), Veneer saw / fine-cutting saw Consoles for rear support table Pneumatic pressure beam control Extraction channel Cutting length 3050 mm Cutting height approx. 50 mm Motor power 2.2 kW 400 V, 50 Hz Saw blade diameter approx. 180 mm Dimensions approx. L x W x H = 3800 x 1000 x 1200 mm Dkjb E Njv D I Uxjl H Nel Note on used machines: • Errors in technical information and prior sale reserved. • Prices stated are pick-up prices from location - free loading! • The machines have been cleaned and function-tested. • All machines are purchased as seen without any claim to warranty. The buyer is free to inspect the machines on site. • Special agreements are only possible in writing. (We will only answer inquiries if you provide your address + telephone number!)

Condition: ready for operation (used), OMGA V113P double saw for frames, strips Specification: • condition - used • manufacturer - OMGA • model - V113P • two 300 mm diameter discs permanently set at a 45 degree angle each Dkobswgdgns E Nl H Nsl • total power 2.2 kW (2 engines of 1.1 kW each) • spindles fi 30 mm • pneumatic clamps • cutting cross-section ~ 100 x 130 mm • original painting • additional tables extending the tops by 100 cm (2 pcs.) • 1993 year of production • weight 225 kg • dimensions 80 x 142 x 132 cm cm (length x width x height) Additional information: • very good, factory technical and visual condition • the photos shown show the actual condition of the item for sale • possibility of switching on and checking the device on site

Condition: excellent (used), Original PAUL roller tables in various widths and lengths, in standard or heavy-duty design for use in front of cross-cut, trimming and resawing circular saws, short work tables enable, for example, entry for transfer from the cross conveyor, passage through the table system or forklift loading of heavy beams or models, long work tables in various dimensions are also available Djbotv U Igj E Nl H Nskl

Condition: used, Year of construction: 2013, - Used machine - Year of manufacture: 2013 - Cutting length: 4300 mm Dsb Eev Iav Nj Nl H Njkl - Cutting height: 2105 mm - Cutting depth: 60 mm - Motor power: 4.0 kW / 400 V - LxWxH: 5720 x 1100 x 2865 mm - from site

Condition: excellent (used), Year of construction: 2003, Pressure beam for clamping workpieces up to approx. 80 mm thick. Particularly interesting for miter cuts and veneer trimming. For a secure hold of the workpiece on the sliding carriage. For 300cm long sliding table or longer. Maximum clamping length approx. 290cm The pressure beam can be mounted on the newer machines with steel guides, but also on machines with Pertinax guides. Dkjb Eou Ivynj Nl H Nol The pressure beam is divided into two parts and can be controlled separately. The saw in the photos is of course not for sale. The machine can be demonstrated at our premises by appointment. We only offer machines that are ready for demonstration in our warehouse, see "other offers from this vendor".

Condition: not inspected (used), Year of construction: 2005, Functionality: unexamined, cutting length (max.): 4,250 mm, saw blade diameter: 350 mm, cutting height (max.): 76 mm, cutting width (max.): 4,250 mm, main saw diameter: 350 mm, power: 15 kW (20.39 HP), Machine type: FXH 430-430 MCS-FLS Cutting length: 4,250 mm Cutting width: 4,250 mm Year of construction: 2005 Saw blade projection max .: 95 mm Saw blade diameter max .: 350 mm Main saw motor: 15 kW Scorer aggregate Automatic cutting length adjustment Grooving and rebating device Window cutting and grooving Package height max .: 76 mm Saw aggregate forward: 5 - 120 m / min Saw aggregate backward: up to 120 m / min Feeder: up to 80 m / min (Europe: forward 25 m/min acc. EN 1870-13) Number of clamps: 8 pcs grip push clamp Clamp opening: 90 mm Formatting device Dsb Eeu Ia Ice Nl H Nekl Short stroke for pressure beam Strip aligner before and after the pressure beam Air cushion tables: 3 pc(s). 2100 x 600 mm Errors and alterations in the technical datas and informations excepted! (displayed photos are symbol photos)

Condition: refurbished (used), hydraulic feed drive units, fully reconditioned, stepless variable; 1 unit for KME 2 or BM - left execution - incl. additional pump 1 unit for KME 2 or BM - right execution - without additional pump Djbsirmule E Nl H Nokl

Condition: excellent (used), Year of construction: 2011, Functionality: fully functional, Cut-to-size saw with automatic swiveling saw blade Machine type: Panhans S45 Speed 420-320, Visioline Cutting length: 4,200 mm Cutting width: 3,200 mm Year of construction: 2011 Saw blade projection max. (0°): 72 mm Saw blade diameter max .: 350 mm Main saw motor: 14 kW Scorer aggregate Scorer saw blade diameter max .: 180 mm Scorer aggregate, manually adjustable Package height max. (0°): 60 mm Saw aggregate forward: up to 100 m / min Saw aggregate backward: up to 100 m / min Feeder: up to 120 m / min (Europe: forward 25 m/min acc. EN 1870-13) Number of clamps: 6 pcs grip push clamp Regulation of clamp force at control desk stepless Number of stop jaw: 2 pcs Clamp opening: 82 mm Strip aligner before the pressure beam Air cushion tables: 3 pcs. 1800 x 600 mm Angular cutting device WSA Motor-driven cutting height adjustment for the main saw, infinately Automatic cutting length adjustment Grooving and rebating device Window cutting and grooving Formatting device Dkeb E Njk T Aw Ssl H Nel This machine is in very good conditions and works very well. The machine is reconditioned, checked and tested in our company. Errors and alterations in the technical datas and informations excepted! (displayed photos are symbol photos)

Condition: excellent (used), For circular saw ESTERER DKN or DKL with saw shaft 60 mm Ø, Dsb E Nsib A Spel H Nskl for RIGHT MACHINE: 1 previously unused, movable blade flange or shifting bush with bearing, clamping nut and bearing housing, max. clamping length 100 mm, flange Ø 145 mm For LEFT MACHINE: 1 second hand in good condition, movable blade flange or sliding bush with new bearing, clamping nut and bearing housing, max. clamping length 100 mm, flange Ø 145 mm

Condition: excellent (used), Year of construction: 2005, Functionality: fully functional, Cut-to-size saw with automatic swiveling saw blade Machine type: Panhans s45 420 Cutting length: 4,200 mm Cutting width: 3,200 mm Year of construction: 2005 Saw blade projection max. (0°): 70 mm Saw blade diameter max .: 350 mm Package height max. (0°): 60 mm Package height max. (45°): 38 mm Main saw motor: 7,5 kW Dob Esit N S Ns Nl H Nokl Scorer aggregate Saw aggregate forward: up to 60 m/min Saw aggregate backward: up to 60 m/min Feeder: up to 60 m/min (Europe: forward 25 m/min acc. EN 1870-13) Number of clamps: 7 pcs grip push clamp Number of stop-jaws: 1 pcs Air cushion tables: 3 pc(s). 1800 x 600 mm Angular cutting device (WSM) This machine is in very good conditions and works very well. The machine will be maintained, checked and tested in our company. Errors and alterations in the technical datas and informations excepted!

Condition: reconditioned (used), Year of construction: 2007, Functionality: fully functional, cutting length (max.): 4,300 mm, cutting height (max.): 80 mm, cutting width (max.): 4,300 mm, main saw diameter: 350 mm, power: 15 kW (20.39 HP), Machine type: fh4 430 HT220 ERB / MCS-Evolution Cutting length: 4.300 mm Cutting width: 4.300 mm Year of construction: 2007 Saw blade projection max .: 95 mm Saw blade diameter max .: 350 mm Main saw motor: 15 kW Scorer aggregate Scorer saw blade diameter max .: 200 mm Automatic cutting length adjustment Scorer aggregate, motor-driven adjustable Package height max .: 80 mm Dkeb E Nlevw Tgaj H Nsl Saw aggregate forward: 5 - 120 m / min Saw aggregate backward: up to 120 m / min Feeder: up to 80 m / min (Europe: forward 25 m/min acc. EN 1870-13) Number of clamps: 2 pcs, dual clamp finger Number of clamps: 5 pcs, single clamp finger Clamp opening: 90 mm Strip aligner before and after the pressure beam Air cushion tables: 3 pc(s). 2100 x 600 mm Rollers at air flotation, 3 pcs This machine is in very good conditions and works very well. The machine is reconditioned, checked and tested in our company. Errors and alterations in the technical datas and informations excepted! (displayed photos are symbol photos)