Panel saw

SELCO WNA 610 TWIN PUSHER

Condition: used, Year of construction: 2007, cutting width (max.): 4,300 mm, cutting length (max.): 2,200 mm, Equipment: scorer, TECHNICAL DETAILS Panel width: max. 4,300 mm Panel length: max. 2,200 mm Cutting height: max. 110 mm Saw blade overhang: max. 120 mm Feed rate: max. 100 m/min Saw carriage Feed rate: max. 150 m/min Main saw Motor power: 18 kW Saw blade overhang: 120 mm Scoring saw Motor power: 2.2 kW Gripper system Number of grippers: 9 EQUIPMENT Second flexible sliding table Panel turning station Thin panel loading Saw unit Scoring unit QUICK CHANGE saw blade quick-change system Dsdpfj Aihrnsx Alfowd Windows XP control OSI machine programming software CE marking The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at its destination. External reference: 8158

Condition: used, Year of construction: 2016, workpiece height (max.): 60 mm, edge thickness (max.): 5 mm, feed rate X-axis: 12 m/min, TECHNICAL DETAILS Workpiece Machining Min. panel thickness: 8 mm Max. panel thickness: 60 mm Min. edge thickness: 0.4 mm Max. edge thickness: 5 mm Max. feed rate: 12 m/min Positioning: NC-controlled Units Number of edge machining units: 6 Pre-milling unit Dwjdpfx Aj Aihcyelfed Automatic, time-controlled engagement Cutting unit Number of motors: 1 Motor power: 0.8 kW Speed: 12,000 min⁻¹ Flush-milling and rounding unit Number of motors: 2 Motor power per motor: 0.65 kW Speed: 12,000 min⁻¹ Corner rounding unit Number of motors: 2 Motor power per motor: 0.65 kW Speed: 12,000 min⁻¹ Edge pulling unit Gluing unit Polishing unit Number of motors: 2 Motor power per motor: 0.25 kW Speed: 1,350 min⁻¹ MACHINE DETAILS Control Operating system: Windows Programming software: SINTRA Safety standard CE marking EQUIPMENT Pressure unit with idler rollers Panel support guides NC positioning Edge roller magazine Glue reservoir for EVA hot melt adhesive Pressure rollers for edges Spray unit

Condition: used, Year of construction: 2009, power: 42 kW (57.10 HP), TECHNICAL DETAILS Number of vertical drilling spindles: 30 Number of horizontal drilling spindles, X-axis: 6 Number of horizontal drilling spindles, Y-axis: 4 Total number of drilling spindles: 40 Milling spindle Number of controlled axes: 4 Motor power: 12 kW Grooving unit Tool diameter: max. 120 mm Tool magazine 1 Number of tool slots: 22 Tool magazine 2 Number of tool slots: 8 MACHINE DETAILS Width: approx. 4,300 mm Length: approx. 2,200 mm Total installed power: 42 kW EQUIPMENT Drilling unit, top Milling spindle, top Fixed grooving unit for grooving in the X-direction Tool magazine at the rear of the machine Tool magazine on the machining head BiesseWorks programming software Automatic panel loading system Lift table Automatic panel stacking system Motorized transfer Vacuum pump The machine is sold and delivered in its actual and legal condition (“as is, where is”), based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. Djdpo Aihnnjfx Alfewd External reference: 7087

Condition: used, Year of construction: 2005, edge thickness (max.): 3 mm, plate width: 3,000 mm, rotational speed (max.): 12,000 rpm, TECHNICAL DETAILS Plate thickness: min. 10 mm Plate thickness: max. 60 mm Plate width: max. 3,000 mm Edge thickness: min. 0.4 mm Edge thickness: max. 3 mm Number of magazine positions for edge rollers: 2 Feed rate: max. 40 m/min Distance between carriers: 500 mm Machining units Number of edge machining units: 8 Dsdpfs Aihtdsx Alfswd End capping unit Number of motors: 2 Motor power: 0.35 kW Speed: 12,000 rpm Fine milling unit for flush milling and rounding Number of motors: 2 Motor power: 1.03 kW Speed: 12,000 rpm Edge rounding unit Number of motors: 4 Motor power: 0.35 kW Speed: 12,000 rpm Pre-milling unit 1 Number of motors: 1 Motor power: 5.5 kW Pre-milling unit 2 Number of motors: 1 Motor power: 5.5 kW EQUIPMENT Carrier chain Pressure system with rubber belt Preheating lamps for the plate side Edge roller magazine with 2 positions EVA hot melt adhesive tank EVA hot melt pre-melter Pressure roller unit End capping unit Fine milling unit for flush milling and rounding Edge rounding unit 2 pre-milling units Automatic, time-controlled activation of the second pre-milling unit Edge trimming unit Glue application unit Air heating unit with 2 motors PC WIN EDGE control system WIN EDGE programming software CE marking The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photo documentation and technical/commercial documents with a descriptive character. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 7818

Condition: used, Year of construction: 1998, edge thickness (max.): 3 mm, rotational speed (max.): 18,000 rpm, TECHNICAL DETAILS Feed speed: max. 25 m/min Edge thickness: max. 3 mm Panel height: min. 14 mm Panel height: max. 55 mm Panel length: min. 350 mm Number of panel edge trimming and routing units: 3 Panel edge trimming and routing unit 1 Motor power: 7.5 kW Speed: 18,000 rpm Panel edge trimming and routing unit 2 Motor power: 7.5 kW Speed: 18,000 rpm Panel edge trimming and routing unit 3 Motor power: 7.5 kW Speed: 18,000 rpm Number of edge processing units: 3 Cutting unit Number of motors: 2 Motor power: 0.22 kW Speed: 17,250 rpm Fine routing unit for flush trimming and rounding Motor power: 1.5 kW Speed: 8,600 rpm Polishing unit Number of motors: 2 Motor power: 0.18 kW Speed: 1,375 rpm EQUIPMENT Processing of thin edges Processing of thick edges EVA hot melt adhesive system Pressure system with rubber belt Panel alignment system at the infeed 3 routing/hogging units with CNC-controlled positioning Cutting unit Fine routing unit for flush trimming and rounding with CNC-controlled positioning Polishing unit Edge roller magazine with 2 positions Glue tank for EVA hot melt adhesive Pressure roller set with 4 pressure rollers CNC-controlled positioning of the pressure rollers Spray unit CE marking Dwedpfx Alo Aihx Rsfed The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and is responsible for the installation, securing, and use of the machine at the destination. External reference: 3944

Condition: used, Year of construction: 2008, edge thickness (max.): 20 mm, feed rate X-axis: 24 m/min, rotational speed (max.): 12,000 rpm, TECHNICAL DETAILS Edge types: Thin edge, thick edge, solid wood Edge thickness: min. 0.3 mm Edge thickness: max. 20 mm Feed rate: max. 24 m/min Number of processing units: 8 units Number of edge processing units: 6 units Panel thickness: min. 12 mm Panel thickness: max. 60 mm Panel width: min. 55 mm Overpressure: Present Overpressure design: Rubber belt Panel support guides: Present Positioning of panel support guides: NC-controlled Pre-milling unit Number: 1 unit Automatic time-controlled engagement: Present Motor power: 3 kW Speed: 9,000 rpm Djdj Aihc Sepfx Alfswd Gluing Glue system: EVA hot melt adhesive Glue reservoir for EVA hot melt adhesive: Present Pre-melter for EVA hot melt adhesive: Present Pre-melter model: HOT MELT A34 Edge magazine: Present Magazine positions: 2 units Pressure rollers: 7 units End capping unit Model: HL 81 Number of motors: 2 units Motor power per motor: 0.8 kW Speed: 12,000 rpm Flush trimming unit, top and bottom Number of motors: 2 units Motor power per motor: 1.5 kW Speed: 12,000 rpm EQUIPMENT Pre-milling unit Corner rounding unit End capping unit HL 81 Flush trimming unit, top and bottom NC-positionable panel support guides Overpressure with rubber belt Edge magazine with 2 positions EVA glue reservoir EVA pre-melter HOT MELT A34 7 pressure rollers Preheating lamps for panel sides The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and is responsible for the installation, securing and use of the machine at the destination. External reference: 4592

Condition: used, Year of construction: 2014, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,300 mm, rotational speed (max.): 24,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 3,000 mm Travel range, Y-axis: 1,300 mm Panel thickness: max. 90 mm Drilling units Number of drilling units: 2 Total number of drilling spindles: 82 Drilling unit 1 Number of vertical drilling spindles: 31 Number of horizontal drilling spindles, X-axis: 8 Number of horizontal drilling spindles, Y-axis: 2 Total number of drilling spindles: 41 Drilling unit 2 Number of vertical drilling spindles: 31 Number of horizontal drilling spindles, X-axis: 8 Number of horizontal drilling spindles, Y-axis: 2 Total number of drilling spindles: 41 Routing spindles Number of routing spindles: 2 Routing spindle 1 Number of controlled axes: 3 Motor power: 4.5 kW Speed: 24,000 rpm Routing spindle 2 Number of controlled axes: 3 Motor power: 4.5 kW Speed: 24,000 rpm Grooving units Number of grooving units: 2 Grooving unit 1 Tool diameter: max. 160 mm Motor power: 3.5 kW Grooving unit 2 Tool diameter: max. 160 mm Motor power: 3.5 kW MACHINE DETAILS Number of controlled axes: 3 Main electrospindle power: 4.5 kW Total connected power: 20 kW EQUIPMENT Drilling unit, top Drilling unit, bottom Routing spindle, top Routing spindle, bottom Fixed grooving unit, top, for grooves in the X-direction Fixed grooving unit, bottom, for grooves in the X-direction Dwjds Aihnyspfx Alfsd Clamping devices for workpiece fixing Automatic panel stacking system Motorized transfer BiesseWorks programming software Front safety mats The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photographic documentation and technical/commercial documents with a descriptive character. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8563

Condition: used, Year of construction: 2006, edge thickness (max.): 3 mm, feed rate X-axis: 11 m/min, rotational speed (max.): 12,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Panel thickness: max. 50 mm Edge thickness: min. 0.4 mm Edge thickness: max. 3.0 mm Feed rate: max. 11 m/min Number of panel processing/milling units: 1 unit Number of edge processing units: 5 units Pre-milling unit Motor power: 2.2 kW Speed: 1,600 rpm Cut-off saw unit Motor power: 0.18 kW Speed: 12,000 rpm Rough milling unit, top and bottom Motor power: 0.27 kW Speed: 12,000 rpm Dsdpfx Ale Aihdaofewd Edge rounding unit Number of motors: 1 unit Motor power: 0.35 kW Speed: 12,000 rpm Edge pulling unit Polishing unit Number of motors: 2 units Motor power: 0.10 kW Speed: 2,700 rpm MACHINE DETAILS Control system: PC 16 EQUIPMENT Pressure roller with idler rollers Edge roller magazine Glue pot for EVA hot-melt adhesive CE marking The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing and use of the machine at the destination. External reference: 8555

Condition: used, Year of construction: 2008, working width: 1,350 mm, power: 85 kW (115.57 HP), roller diameter: 250 mm, TECHNICAL DETAILS Working width: max. 1,350 mm Number of processing units: 4 Feed motor power: 5.5 kW Sanding unit 1 Roller diameter: 250 mm Motor power: 18.5 kW Speed: 2,930 rpm Sanding belt width: approx. 1,350 mm Sanding unit 2 Roller diameter: 250 mm Dsdpe Aihpajfx Alfswd Motor power: 18.5 kW Speed: 2,930 rpm Sanding belt width: approx. 1,350 mm Sanding unit 3 Roller diameter: 250 mm Motor power: 15 kW Speed: 2,905 rpm Sanding belt width: approx. 1,350 mm Sanding unit 4 Roller diameter: 320 mm Motor power: 15 kW Speed: 2,930 rpm Sanding belt width: approx. 1,350 mm MACHINE DETAILS Installed total power: 85 kW EQUIPMENT Calibrating, sanding, and finishing machine Work table with fixed height for line operation NC-controlled feed speed regulation Sanding unit with steel roller Sanding units with rubber rollers Touchscreen control CE marking The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8401

Condition: used, Year of construction: 2014, power: 22 kW (29.91 HP), edge thickness (max.): 12 mm, feed rate X-axis: 18 m/min, TECHNICAL DETAILS Feed speed: max. 18 m/min Panel height: min. 10 mm Panel height: max. 60 mm Panel width: min. 70 mm Edge thickness: min. 0.4 mm Edge thickness: max. 12 mm Number of processing units: 9 Pre-milling unit Number of units: 1 Motor power: 2.2 kW Dwjdpfx Aj Aihdljlfod Edge magazine and gluing Number of magazine positions: 1 Number of pressure rollers: 4 Edge processing units Number of edge processing units: 7 Cutting unit Number of motors: 2 Motor power per motor: 0.35 kW Flush trimming and rounding unit Number of motors: 2 Motor power per motor: 0.55 kW Corner rounding unit Number of motors: 2 Motor power per motor: 0.35 kW Grooving unit Number of motors: 1 Motor power: 3.5 kW Buffing unit Number of motors: 2 Motor power per motor: 0.18 kW MACHINE DETAILS Total connected power: 22 kW EQUIPMENT Processing of thin edges Processing of thick edges Processing of solid wood edges EVA hot melt adhesive system AIRTEK hot air system Overpressure with idle rollers Panel support guides Pre-milling unit with automatic, time-controlled operation Edge roller magazine EVA glue reservoir EVA pre-melter Set of pressure rollers with 4 pressure rollers NC positioning of pressure rollers Cutting unit Flush trimming and rounding unit with NC positioning Corner rounding unit WD60 Grooving unit Edge pulling unit with NC positioning Glue pulling unit Buffing unit Spray unit Machine programming software PowerControl PC20 CE marking The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photographic documentation and technical/commercial documents with a descriptive character. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External Reference: 7517

Year of construction: 2014, condition: used, power: 9 kW (12.24 HP), working width: 2,500 mm, TECHNICAL DETAILS Working width: min. 510 mm Working width: max. 2,500 mm Number of saws: 6 + 1 MACHINE DETAILS Installed total power: 9 kW EQUIPMENT Dwjdpfe Aihxxex Alfod Saw unit Windows XP SP3 control system Packsize operating console 3.9.3 machine programming software CE marking The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at its destination. External reference: 7393

Condition: used, Year of construction: 2005, power: 23 kW (31.27 HP), travel distance X-axis: 4,400 mm, travel distance Y-axis: 1,900 mm, TECHNICAL DETAILS Working area X-axis: 3,390 mm Working area Y-axis: 1,570 mm Travel range X-axis: 4,400 mm Travel range Y-axis: 1,900 mm Panel passage: max. 250 mm Number of processing stations: 2 Number of controlled axes: 4 Feed rate X-axis: 80 m/min Feed rate Y-axis: 80 m/min Dwjds Aihdtopfx Alfod Feed rate Z-axis: 25 m/min Number of rails: 8 Number of vacuum cups: 24 Drilling unit Number of vertical drilling spindles: 22 Number of horizontal drilling spindles X-axis: 6 Number of horizontal drilling spindles Y-axis: 4 Total number of drilling spindles: 32 Milling spindle Number of controlled axes: 4 Motor power: 13.5 kW Speed: 18,000 rpm Grooving unit Tool diameter: max. 120 mm Motor power: 1.7 kW Speed: 6,500 rpm Horizontal electro-spindles Number of outputs: 2 Motor power: 3.5 kW Speed: 12,000 rpm Number of tool positions: 10 MACHINE DETAILS Suction capacity of vacuum pump: 250 m³/h Total connection power: 23 kW EQUIPMENT Console and rail table CNC-controlled positioning of the rails CNC-controlled positioning of the vacuum cups Vacuum pump Drilling unit, top Milling spindle, top Automatic tool changer Fixed grooving unit in X-direction Horizontal electro-spindles Tool magazine at the rear of the machine Chip conveyor Windows control system BiesseWorks programming software CE marking The machine is sold and delivered in its actual and legal condition (“as is, where is”), based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and is responsible for the installation, securing and use of the machine at the destination. External reference: 8377