Condition: used, Year of construction: 2001, machine/vehicle number: 01/2437, Capacity: 250 ton V – Ring nominal force: 30 - 125 ton Counter ram nominal force: 30 - 125 ton Ram stroke: 67 mm Table surface area : 560 x 600 mm Slide area: 560 x 560 Number of strokes: 80 s.p.m. Weight of machine approx.: 14.000 kg Duslrcrgju U Nims Hst Standard configuration Automation roll-off try with leveller

Condition: ready for operation (used), Functionality: limited functionality, machine/vehicle number: 088-030 | 159, pressing force: 3 t, table width: 280 mm, table length: 280 mm, operating speed: 100 mm/s, overall weight: 370 kg, reverse speed: 300 mm/s, ram stroke: 280 mm, retraction force: 1 t, input voltage: 380 V, Manufacturer: VEB Wema Zeulenroda Type: PYTE 3.15 Dujlrcsuclhnjrg Hjt Maximum pressing force: 3.15 tons Lower table: 280 x 280 mm Cylinder stroke: 280 mm Downward speed: 100 mm/sec Upward speed: 300 mm/sec Power requirement: 1.5 kW Weight: 370 kg Hydraulic press with mechanical two-hand operation or switchable to mechanical foot operation. Both operating variants act directly on the hydraulic control valve. The design is very robust and durable. The press is ready for immediate use and in good condition. With mechanical two-hand operation, both levers must be pulled in exactly the same way (see video), otherwise the press will not lower. This is why we mainly worked with the foot operation. The pressure indicator is defective and would have to be replaced if necessary.

Year of construction: 1975, Condition: good (used), machine/vehicle number: MA1120, Weight [kg] Approx. 7000 Connected load 380V / 5,5 PS Duolrsg R Iwbocrg Hot Stroke [mm] 300 Gear [rpm] 1450 Table size [LxW] 500/600 Accessories Operating instructions / Circuit diagrams / Hydraulic diagrams / Press test manual

Condition: new, AUTOMATIC DOUBLE SPEED MOTORIZED HYDRAULIC PRESS WITH RAPID POWER 20 TON Max capacity TON 20 Approach speed (in rapid) mm/min 1700 Working speed (in slow) mm/min 440 Cylinder rod stroke mm 300 Cylinder rod diameter mm 45 Duslrsrvz A Sjcrg Hjt Shank diameter mm M14 Tank capacity liters 30 Max pressure bar 350 Voltage V 400 Frequency Hz 50-60 Motor Power kW 1.5 Max absorbed current A 3.8 Weight Kg 200

Condition: new, Zimas P100-1050 - Workshop press with folding device - Passage: 1050 mm - Capacity: 100 to. - incl. 4-fold die and bending tool Specifications: Pressing force - Pressing force: 1000 kN - Max. pressure: 289 bar - Piston stroke: 300 mm - Downward speed: 10.5 mm/s - Working speed: 2.7 mm/s - Return speed: 15 mm/s - Passage: 1050 mm - Table dimensions: 1030 x 460 mm - Table height adjustment: 600 mm / 5 steps Duolrcrgou Tvf So Hjt - Fence adjustment: 400 mm - Punch Ø: 110 mm - Guide piston Ø: 60 mm - Motor power: 7.5 kW - Supply voltage: 400 V - Dimensions WxHxD: 2000 x 2150 x 900 mm - Weight: 1970 kg

Condition: used, Single column hydraulic press DUNKES type HZT 2,5 Machine No. H94-2558 Year of construction 1994 pressure force 2,5 ton. throat 180 mm table area 420 x 300 mm drop-through opening in table 60 x 185 mm ram surface Ø 40 mm clamping spigot bore Ø 20 mm ram stroke 160 mm Installation height max. 250 mm Rapid traverse downward 65 mm/sec. Rapid traverse upwards 160 mm/sec. Djlrcsh Uhqyjrg Heut Working speed 8,3 mm/sec. Table height above floor 950 mm Hydraulic operating pressure 135 bar Tank capacity hydraulics approx. 100 liters Drive power 1,5 kW Mains connection 400 Volt, 50 Hz - Installation height can be increased by shortening the piston rod by 80 mm - Pressure and travel cut-off - 2-hand operation at the machine - stroke counter - safe press control with 2 monitored hydraulic valves - UVV 11.064 VGB 7.n.5.2 (for manual insertion work) - 32047 read off operating hours - Electrical circuit diagram and hydraulic diagram available space requirement L x W x H 1100 x 980 x 1950 mm weight 700 kg very good condition

Condition: used, Pressure total: 800 ton Stroke: 400 mm Slide adjustment: 160 mm Shut height (stroke down, adjustment up): 800 mm Table surface area : 1000 x 1000 mm Slide area: 1000 x 1000 mm Number of strokes: 18 s.p.m. Distance between the guardrails: 850 mm Free frontal opening L-R: 1050 mm Duslrcrjuqh Rveg Hst Ejector in table: 100 ton Lower ejector stroke: 400 mm Required power: 132 kW Standard configuration Machine was overhauled in 2017 / 2018

Condition: defective spare-parts repository (used), Year of construction: 1995, Functionality: not functional, machine/vehicle number: PEE I 400, pressing force: 400 t, ram stroke: 140 mm, used eccentric press incl. functional belt device, details according to type plate, inspection possible at any time Delrcrgot U Nwrj Heut Main shaft and drive motor are to be replaced/renewed

Year of construction: 1975, Condition: good (used), machine/vehicle number: P4198057, Item number MA1136 Manufacturer Ebu Type SK 15 Year of manufacture 1975 machine no. P4198056 length [mm] 1300 width [mm] 800 height [mm] 1800 Weight [kg] 940 Connected load 380V Stroke [mm] Stroke adjustment 70mm throat [mm] 210 Dujlrsh Ed Umecrg Hjt Punching force [to] 15 Table size [LxW] 430 X 400 Equipment 140 strokes / min

Condition: used, Year of construction: 1963, pressure 80 t throat 280 mm stroke 10 - 140 mm no. of strokes 65 Hub/min distance table/ram, max. stroke up, adjustment up 270 mm table surface area 840 x 560 mm hole in the table 195 mm ram surface 750 x 250 mm ram adjustment 60 mm Duelrcrevki H Aeg Hst total power requirement 4,0 HP weight of the machine ca. 4,2 t dimensions of the machine ca. 1,6 x 1,2 x 2,4 m with motor, back gears, wheel-guard, air-friction clutch, safety device in TDC and secure control according to the German Safety Regulations for manual put-in (UVV), mech. overload protection in slide, autom. centralized lubrication, fixed bed, two-hand operation, control cabinet

Condition: new, Zimas P150-1550 - Workshop press with folding device Duelrceuzinrorg Hot - 2 pressure punches - incl. 4-fold die and folding tool Specifications of the press - Pressing force: 1500 kN - Pressure: 300 Mpa - Piston stroke: 300 mm - Downward speed: 9.8 mm/s - Working speed: 2.6 mm/s - Return speed: 13 mm/s - Passage: 1550 mm - Table dimensions: 1530 x 500 mm - Table height adjustment: 750 mm / 5 steps - Fence adjustment: 400 mm - Punch Ø: 2x 150 mm - Guide piston Ø: 70 mm - Motor power: 7.5 kW - Supply voltage: 400 V - Dimensions WxHxD: 2150 x 2050 x 1000 mm + 750 x 1100 x 750 mm - Weight: 2700 kg

Condition: used, Single-column hydraulic press SCHÖN type FES / C 7 Machine no. No. 4281 Year of construction 1995 Pressure force 7 ton. throat 170 mm Dolror I E Itscrg Hjut Projection round cycle station 60 mm Table size 310 x 200 mm Rotary indexing table Ø 400 mm, with 12 indexing stations Plunger surface approx. Ø 100 mm Plunger plate 315 x 200 x 35 mm Ram stroke 100 mm Installation height rotary table - ram plate max. 130 mm Table height above floor 890 mm Ram speed rapid traverse downwards approx. 300 mm/sec. Ram speed rapid traverse upwards approx. 300 mm/sec. Ram speed Working speed approx. 30 mm/sec. Drive power 1.5 kW Mains connection 380 Volt, 50 Hz Tank capacity approx. 50 liters hydraulic oil - Rotary indexing control via SIEMENS S7- 1200 - GECHTER pneumatic rotary indexing table with 12 indexing stations - Mechanically adjustable fixed stop - Adjustable pressure holding time in the UT - electrical 2- manual operation Space requirement L x W x H 1450 x 850 x 1900 mm weight 700 kg good condition

Condition: new, stroke lenght (max.): max. 400table height: Fußboden bis Tischplatte Oberkante 900daylight: 600speed: Vorlauf 120 mm , Druck 13 - 4 mm, Rücklauf 170/mm/formance of pump: 103 Lt./min (REXROTH - Axialkolbenpumpe)motor: 22 kw - 1500d / minmessurements (LxWxH): 2000x3200x4300weight approx.: 10.000oil filling: 700 Capacity: 250 tons (at 245 BAR) Operation : Via key switch Manual / set-up mode using two hands without light sensor Automatic via two-hand operation at full speed with light sensor Main cylinder: Ø 350 mm Auxiliary cylinder: 2 pcs. Ø 80 x 60 mm Motor: 22 kW. – 45 hp. Pump: 103 lt./min REXROTH - axial piston pump Speed: Forward 120mm Pressure 13-4mm return 170mm./sec. Clear width: 1100 mm Table top: 1000x1000 mm/ with T-slots Ram plate: 1000 x 1000 mm./ with T-slots & spring welds Installation height: 600 mm (max. distance between table & ram plate) Stroke length: 400mm max Table height: 900 mm floor to table top edge Hydraulics: Duelrcrgegta Rcj Het Block & Valves ( REXROTH ) (Hydraulic Accessory on Top of Press) priming valve Hydraulic & mechanical ram protection Pressure setting via PLC (min. pressure 35 ton) Speed setting via PLC. Pressure hold valve for 600 sec. Air cooler (temperature control adjustable via screen) Automatic lubrication for guides (adjustable via screen) Side of the working area closed with sheet metal wall Guide rails for parallelism Auxiliary engine: 5.5 kW+ 2.2 kW Auxiliary pump: 22cc.+5.5cc Safety rails around the hydraulics and side ladder Oil tank: 800 liters Oil quantity: approx. 700 liters Control: SIEMENS S7 - 1200 main switch box Giftable control panel Soft starter for engine Safety PLC: Sick PLC screen 9'' Siemens Two hand operation (movable) Ruler measuring stick for setting the stroke length 450 mm. - NOVOTECHNOLOGY Light sensor for the front and back of the work area - SICK 900 + 150mm. SECOME & Ethernet connection for remote maintenance - Siemens Working space lighting 2 compartment 8 free inputs and outputs on the PLC Automatic print refill if lost Operating instructions in German hydraulic plans control plans

Condition: excellent (used), Year of construction: 2001, operating hours: 8,000 h, Functionality: fully functional, machine/vehicle number: 1354.18, total height: 20,000 mm, installation height: 500 mm, pressing force: 30 t, table width: 550 mm, table length: 400 mm, operating speed: 60 mm/s, overall weight: 2,500 kg, ram stroke: 300 mm, power: 7.5 kW (10.20 HP), Technical data: Pressing force 30 t Dolrcrgotrd Ubj Hout Stroke 300 mm Installation height 500 mm Fold-through hole in table 120 mm Front passage 550 mm Usable table depth 400 mm Usable table width 550 mm Speed from 60 mm/sec. Speed up to 180 mm/sec. Hydraulic oil tank capacity 400 l Drive power 7.5 kW External dimensions L x W x D 1200 x 2000 x 2600 mm Weight 2.5 t With - 2-hand release - light barrier - safety cage - Infinitely variable pressure control, preselection with digital display - Infinitely variable speed control - 8000 switch-on hours - CE marking - complies with UVV

Year of construction: 1964, Condition: used, Item number MA1113 Manufacturer Ebu Type EP1 year of manufacture 1964 Machine-No. 6791 pressing force [to] 8 length [mm] 900 width [mm] 800 Height [mm] 1600 Weight [kg] Approx. 800 Connected load 380 V Stroke [mm] 5-55 Working height [mm] Ram adjustment 35mm / Ram strokes 130 min Table size [LxW] 230 X 320 Dujlrcrgsg Ilmgs Hot

Condition: used, Eccentric punch press HAULICK + ROOS type RVD 125 double column - eccentric press Machine No. 212560 Year of construction 1981 pressure force 125 ton. table size 880 x 800 mm table opening 470 x 140 mm column width 900 mm column width lateral 415 mm ram stroke 45 mm slide adjustment travel 0-80 mm Installation height on the picture 340 mm Stroke rate 50 to 300 strokes/min. Motor power main drive 22 kW Mains connection 380 volt, 50 Hz - Double connecting rod drive with 4-fold eccentric shaft for off-center ram pressure load - adjacent electrical cabinet - NC roll feed EBU, width 250 mm, year 2003 - adjacent control panel for roll feed - strip running direction from left to right space requirement (press) L x W x H 3000 x 2000 x 3020 mm transport height 2950 mm weight of the press approx. 11 ton. Dolrcrjhlnzksg Hsut

Condition: new, die cushion press capacity: ohne - ight curtain - manual and automatic working - manual stroke adjustment by camshaft switch - maintenance free self lubricating 4-fold ram guiding - polster plate with T-slots - according to CE rules Delrod Ab Ihecrg Hsut press force:100 tohydraulic pressure:240 bartable:1100 x 700 mmram dimension:900 x 600 mmhole in table:120 mmstroke:300 mmdistance ram-table:550 mmrapid speed:100 mm/sworking speed:8,5 mm/sreturn speed:165 mmmotor:11 kWlength:2.180 mmwidth:1.600 mmheigth:3.150 mmweight:6.500 kg

Year of construction: 1974, Condition: used, machine/vehicle number: P52111974, Item number: MA909 Manufacturer: Ebu Type: SK 75 Year of manufacture: 1974 Machine no.: P 5211974 length [mm]: 1700 width [mm]: 1200 height [mm]: 2450 Weight [kg]: Approx. 4500 Connected load: 380V Duslecanfworcrg Hjt Stroke [mm]: 16-140 throat [mm]: 300 Punching force [to]: 75 Table size LxW: 800 X 620 Machine data: Stroke rate 105 / min Stool adjustment 80mm Table adjustment Control system: Set Up Single stroke foot Continuous run Accessories: Protective screen

Condition: used, Single-column eccentric press WEINGARTEN type EV 63 Machine. No. 738 / 61 Year of construction 1962 Pressure capacity 63 ton. throat 260 mm Dolrcrek S Htxeg Hjut Table surface 630 x 530 mm Table opening Ø 210 mm ram surface 315 x 260 mm Plunger stroke adjustable 8-100 mm Plunger adjustment 63 mm Installation height max 450 mm Stroke rate 115 strokes / min. Compressed air requirement min. 4.5 bar Motor power 4 kW Mains connection 380 Volt, 50 Hz Table height above floor approx. 750 to 900 mm - Electric lift release via foot switch or two-hand operation - Overload protection by breaker plate - Clutch/brake combination with WEINGARTEN friction threaded clutch with TDC overrun protection - Front crankshaft support bearing - Press table height-adjustable via 2 threaded spindles - Manual central grease lubrication - Control cabinet adjacent - UVV for manual insertion work Space requirement L x W x H 1750 x 1600 x 2430 mm Weight 4.5 tons good condition

Condition: new, die cushion stroke: 200daylight: 600pressure: 60stroke: 350 Djlrcrsd Ab Iiog Heut

Condition: new, pressure: 100motor: 15daylight: 500stroke lenght (max.): 400table diamension: 800 x 600tappet area: 800 x 600table height: 850messurements (LxWxH): 1.300 x 2.000 x 2.750weight approx.: 5.500oil filling: 200 Control / Key switch:         1. setup mode Manual without light sensor(max. 10mm. /sec. speed). 2. automatic (full speed) with light sensor Main cylinder: Ø 230mm. Auxiliary cylinder: 2 pcs. Ø 50 x 30mm. Auxiliary guide: 2 pcs. Ø 50mm. Motor: 11kw. - 15hp. ( IE-3 ) Pump: 23Liter / ASC. Speed : flow 110mm./sec. - return 200mm./sec. - Pressure : 9 mm/sec. Installation height: 500mm. Stroke length: 400mm. Table top: 800 x 600 - (with T - grooves) Plunger plate: 800 x 600 - (with T - grooves) Table height: 850mm. (Floor to table top upper edge) ----- Dolrcem Nntyorg Heut Accessories Hydraulics:           Hydraulic control block & accessories: REXROTH Pressure adjustment via PLC.  (10 - 60 tons) Speed adjustable via PLC. Air cooler Pre-fill valve Accessories control: Siemens S7-1200 Main control box   Swivel control panel Safety PLC. - SICK Light sensors SICK 700 + 150mm. Linear scale for adjusting the stroke length 9 PLC screen - Siemens (German & English) Movable two-hand control Ethernet connection for remote maintenance Alarm annunciator for malfunctions (candlestick & sound) 2-fold workspace lighting 8 free ON & OFF buttons on the PLC. for external connections The press complies with the machine directives Hydraulic proportional valves Dual channel cable protection Instruction manual & parts list (German + English) With side safety door (doors can be moved backwards)

Condition: new, stroke: max.450daylight: max. 900motor: 22performance of pump: 48oil filling: 90messurements (LxWxH): 2500x1200x2800weight approx.: 4000max. diameter: 330pressure: 300 Duslrcrgoutuyvj Hot

Condition: new, die cushion stroke: 200 Dujlrcred Ab Ikjg Hjt

Condition: new, die cushion press capacity: ohne Duslod Ab Insrcrg Hst

Condition: new, pressure: 60motor: 11daylight: 450stroke lenght (max.): 400table diamension: 600 x 500 x 80tappet area: 600 x 500 x 90table height: 850messurements (LxWxH): 1.300 x 2.000 x 2.700weight approx.: 4.000oil filling: 200 Djlrsmmuq Ijcrg Heut